Education Commons^™

Mechatronics Education At Kettering University: Development Of Learning- Specific Hardware And Software, Jeffrey Hargrove, Theodore J. Stokes

Jeffrey Hargrove

A series of learning-specific electronic circuit boards and associated software has been developed to support mechatronics education in the Mechanical Engineering Department at Kettering University. The boards are designed to interface to the Toshiba TLCS-900H Microprocessor Trainer and Evaluation Board. The purpose of these boards is to provide mechanical engineering students of mechatronics with robust hardware that readily permits interfacing of sensors and actuators to microcontrollers used in mechatronic applications. Further, the boards feature signal conditioning circuits for use in conjunction with sensors, and driver circuits for operating high-current actuating devices. Supporting software has been written to permit ready use …

Development And Implementation Of Mechatronics Education At Kettering University, Jeffrey Hargrove

Jeffrey Hargrove

The Mechanical Engineering Department at Kettering University has completed development of a significant new component of education in mechatronics. The work began in the fall of 1997 as the principal part of an award for “Instrumentation and Laboratory Improvement” by the Division of Undergraduate Education of the National Science Foundation. It has culminated with the successful implementation of two undergraduate courses in mechatronics, two mechatronics laboratories and a website to support the educational endeavors of the mechatronics students. As will be described in this paper, the first course and its laboratory exercises are designed specifically to provide the students with …

Educating The Space Scientists At Embry-Riddle Through Design, Build And Fly Rocketry Experience, Pedro Llanos, Robert E. Haley, Sathya Gangadharan

Pedro J. Llanos (www.AstronauticsLlanos.com)

“Whole-Brained” Engineering Education In Undergraduate Studies At The University Of Dayton, Kylie Moellering

Kylie Moellering

Augmented Reality Engine In Classroom_Hololens.Jpg, Lori Brown

Lori Brown

Lori Brown With Hololens In Classroom Pilot Training.Jpg, Lori Brown

Lori Brown

Initial Results From The First National Survey Of Student Outcomes From Small Satellite Program Participation, Jeremy Straub

Jeremy Straub

This paper presents initial results of the first national / international survey of student participants in CubeSat and other small spacecraft programs. It aims to make portions of the results of the survey available for immediate use by the CubeSat / small spacecraft community prior to the completion of a thorough analysis of the results and consideration of correlating and prospective causation factors for various outcomes.

The Weather And Air Traffic Management Integration Course In The Graduate Aeronautics Program At Embry-Riddle, John Lanicci

John M Lanicci

One year ago, Embry-Riddle Aeronautical University added a new Area of Concentration (AOC) in Aviation Meteorology to the Master of Science in Aeronautics (MSA) program at the Daytona Beach, Florida campus. As part of the preparation for the start of this program, an experimental graduate seminar in Weather and Air Traffic Integration was taught over the summer, which attracted graduate students with backgrounds in commercial and private aviation, applied meteorology, and engineering physics. The purpose of this course was to introduce the students to the concept of weather and air traffic integration as it currently exists and is being planned …

Integrating Games To Teach A First Programming Course, Soumia Ichoua

Soumia Ichoua

In the past few years, there has been an increased interest in game-based learning as a powerful tool to stimulate students’ interest and promote their engagement in the learning process. In this paper, we discuss our experience in integrating gaming to teach a first programming course. The course is restructured and redesigned to allow teaching the basics of programming through games. Students actively use fundamental programming concepts learned to modify and create two dimension games using C# and XNA with .Net framework. This is an on-going work. Surveys and worksheets are developed to be used in assessing the effectiveness of …

Using Simulated Virtual Interactivity In Construction Education, Saeed Rokooei, James Goedert

Saeed Rokooei

Supporting Teacher Orchestration In Ubiquitous Learning Environments: A Study In Primary Education, Juan Muñoz Cristóbal, Ivan Jorrín Abellán, Juan Asensio Perez, Alejandra Martínez Monés, Luis Prieto, Yannis Dimitriadis

Ivan M. Jorrín Abellán

During the last decades, educational contexts have transformed into complex technological and social ecologies, with mobile devices expanding the scope of education beyond the traditional classroom, creating so-called Ubiquitous Learning Environments (ULEs). However, these new technological opportunities entail an additional burden for teachers, who need to manage and coordinate the resources involved in such complex educational scenarios in a process known as “orchestration”. This paper presents the evaluation of the orchestration support provided by GLUEPS-AR, a system aimed to help teachers in the coordination of across-spaces learning situations carried out in ULEs. The evaluation, following an interpretive research perspective, relied …

A Whole New Engineer, David Goldberg, Mark Somerville

Mark Somerville

A Revolution Is Coming. It Isn’t What You Think. This book tells the improbable stories of Franklin W. Olin College of Engineering and the iFoundry incubator at the University of Illinois. That either one survived is story enough, but what they found out together changes the course of education transformation forever: How trust is key to unleashing young, courageous engineers. How engineers need to move from a narrow technical education to one that actively engages six minds. How emotion and culture–not content, curriculum & pedagogy–are the crucial elements of change. How all stakeholders can collaborate to disrupt the status quo.status …

The Impact Of Technology, Katina Michael

Professor Katina Michael

Consumer electronics have revolutionized the way we live and work. Most students that I know would rather forgo expensive clothing labels than do without their branded smartphone. In fact, some of them would forgo food altogether if it meant their phone could be “always on” and “always with them”, clipped onto the belt buckle, strapped into a pants or jacket sleeve or increasingly into the open palm of their hand. Something happens when our basic needs as humans are overtaken by some other need that was once a distant want at best- plainly confusion in our ability to rightly determine …

Assessment Of Educational Expectations, Outcomes And Benefits From Small Satellite Program Participation, Jeremy Straub, Ronald Marsh

Jeremy Straub

This paper begins to characterize the educational outcomes that can be produced from student participation in a small spacecraft development program. We asked students what benefits they expected to receive from program participation and we asked them, at the end of the semester, what benefits they had received. We also characterized student performance through the use of post-participation Likert-like scale questions and the use of a widely-used questionnaire for assessing student research participation outcomes. We compare benefit expectation and attainment, characterize the level of benefits received across multiple types of participation and assess the effect of program participation on subject-specific …

Flipped Technological Training And Development Using Quality Systems Management In The Public Services Field, Dustin Bessette, Sharon Burton, Maurice Dawson

Maurice Dawson

Training and development is ideal for businesses process improvements in many public service fields. Education, development, and training tools are not new concepts, but are ideal, crucial, and responsive in the central utilization of employee training systems for public service fields. The need for public workforce has increased and demanded accelerated technological training and development process that have positive value and achievable gains. One method to surge this problem is to flip the technological training and development tools that have been issued and over used in the past. These tools not only hold back vicious potential from employees, but employees …

Olin College: Re-Visioning Undergraduate Engineering Education, Lynn Stein, Mark Somerville, Jessica Townsend, Vincent Manno

Jessica Townsend

The Franklin W. Olin College of Engineering was created to address several perceived needs for engineering graduates of the future and to be an experimental laboratory for engineering education. As such, Olin College is not only dedicated to innovation within its boundaries but also to catalyzing change throughout the engineering enterprise. The curriculum aims to support life-long learning, teamwork, communication, and contextual understanding, along with rigorous quantitative and qualitative skills.

Olin College: Re-Visioning Undergraduate Engineering Education, Lynn Stein, Mark Somerville, Jessica Townsend, Vincent Manno

Vincent P. Manno

The Franklin W. Olin College of Engineering was created to address several perceived needs for engineering graduates of the future and to be an experimental laboratory for engineering education. As such, Olin College is not only dedicated to innovation within its boundaries but also to catalyzing change throughout the engineering enterprise. The curriculum aims to support life-long learning, teamwork, communication, and contextual understanding, along with rigorous quantitative and qualitative skills.

Olin College: Re-Visioning Undergraduate Engineering Education, Lynn Stein, Mark Somerville, Jessica Townsend, Vincent Manno

Lynn Andrea Stein

The Franklin W. Olin College of Engineering was created to address several perceived needs for engineering graduates of the future and to be an experimental laboratory for engineering education. As such, Olin College is not only dedicated to innovation within its boundaries but also to catalyzing change throughout the engineering enterprise. The curriculum aims to support life-long learning, teamwork, communication, and contextual understanding, along with rigorous quantitative and qualitative skills.

Olin College: Re-Visioning Undergraduate Engineering Education, Lynn Stein, Mark Somerville, Jessica Townsend, Vincent Manno

Mark Somerville

The Franklin W. Olin College of Engineering was created to address several perceived needs for engineering graduates of the future and to be an experimental laboratory for engineering education. As such, Olin College is not only dedicated to innovation within its boundaries but also to catalyzing change throughout the engineering enterprise. The curriculum aims to support life-long learning, teamwork, communication, and contextual understanding, along with rigorous quantitative and qualitative skills.

San Marcos University, Lima, Peru, Fathi Habashi

Fathi Habashi

Considering The Educational Benefits Of A Cubesat Program, Jeremy Straub, Samudra Haque, Christopher K. Dinelli

Jeremy Straub

This presentation will provide an overview of work performed at the University of North Dakota with regards to the characterization of educational benefits from small spacecraft development efforts. We report on efforts to characterize benefits that ensued from participation for personal extracurricular enrichment, as part of a formal class (on project management), as part of multiple senior design projects, for independent study credit and for satisfying class project requirements. This assessment has been performed using a standard questionnaire for student research participation as well as custom questionnaires related to program focus areas. We have also analyzed student course performance, where …

The Use Of The Roofsat For Computer Science And Engineering Education, Jeremy Straub, Ronald Marsh

Jeremy Straub

This poster presents an overview of a tool that has been created to provide students with real-world experience in the design, development and operation of control and scientific mission software for a cyber-physical system. The ROOFSAT, developed at UND, is a low-cost analog for a small spacecraft (though in many ways these capabilities also enable similar UAV work). The ROOFSAT was constructed with approximately $1,500 generously provided by the John D. Odegard School of Aerospace Sciences out of commercially-available parts. It includes multiple cameras, a pan-tilt mount and the same space-qualified computer hardware which has been used on both spacecraft …

Openorbiter Small Spacecraft Development Program Educational Benefits, Jeremy Straub

Jeremy Straub

No abstract provided.

Educational Outcomes From The Openorbiter Small Spacecraft Development Program, Jeremy Straub

Jeremy Straub

The OpenOrbiter program [1] is developing a low-cost framework for the creation of space-craft by researchers and educators worldwide [8]. In addition to the technical objectives, ed-ucational assessment [2, 3] has also been a key focus. Students working on development of the spacecraft [4] were asked what types of benefits they sought from their participation [5]. The assessment of the attainment of these benefits is ongoing, in conjunction with continued development in pursuit of the crea-tion of a set of designs that can be used to build a spacecraft with a cost of under $5,000 [13] .

Openorbiter Combined Software Work Breakdown Structure, Jeremy Straub, Timothy Whitney, Tyler Leben, Kelton Karboviak, Zach Maguire, Christoffer Korvald, Scott Kerlin

Jeremy Straub

As part of CSCI 297, students created work breakdown structures for different areas of the OpenOrbiter project’s software groups. In CSCI 207, they learned about all aspects of project management via experiential learning. They acted as project management ‘consultants’ to the OpenOrbiter software teams. To facilitate the creation of the work breakdown structures, they interviewed team leads, attended team meetings and discussed current progress and needs with members of the teams. In some cases, they collected additional information from reference sources and/or spoke with other teams which would be the ‘customer’ of a particular area of the software system. These …

A Proposed Learner-Centered Mechatronics Engineering Instructional Program, Patrick N. Currier, Richard Goff, Janis Terpenny

Patrick N. Currier

This paper examines the need and requirements for a mechatronics degree program. The results of a survey of the few existing programs in this field are provided. Then, using a case study example for Virginia Tech, a proposed mechatronics curriculum based on a learner-centered paradigm is described. The curriculum combines existing courses in mechanical, electrical, and computer engineering with new, hands-on courses to provide students with a chance to practice and explore the subject matter in ways consistent with the demands of both industry and accreditation. This program, if implemented, could provide a university with a unique offering to attract …

A Curriculum-Integrated Small Spacecraft Program For Interdisciplinary Education, Jeremy Straub, Anders Nervold, Josh Berk

Jeremy Straub

Space generates inspiration, aspiration, and passion in many students, traits that are often lacking in the traditional college classroom. By utilizing a meaningful space project with a tangible product, which serves a valuable purpose in the curriculum, instructors can generate passion in their students with regards to the topics being explored. Additionally, it can fuel interest in aerospace science and commerce, guiding more students towards valuable STEM degrees and job opportunities, which can lead to future growth and fresh blood in the aging aerospace employee pool.

OpenOrbiter is a student-run research project at the University of North Dakota that can …

The Road To A Space Solar Power Cubesat In North Dakota, Corey Bergsrud, Jeremy Straub, Sima Noghanian

Jeremy Straub

Presents current work at the University of North Dakota related to the long-term development of a Solar Power Satellite (SPS).

Using Plankton Imaging Technology And Computer Science For Biological Oceanographic Advancement And Education, Adam T. Greer

Adam T. Greer

Oceanography is an inherently interdisciplinary subject that combines observations of physics, biology, chemistry, and their interactions. While most physical and chemical measurements can be made on small scales (cm to m) through the use of sensors (temperature, salinity, pH, etc.), traditional tools to understand the biology of the ocean have only allowed for coarse sampling resolution (i.e., plankton nets sample large portions of the water column). New imaging technology enables the biological component of the ocean to be sampled on the same scale as the physical and chemical, allowing scientists to finally address the interactions among different oceanographic processes. Image …

The Openorbiter Program: Intrepreneurship, Entrepreneurship And Innovation, Jeremy Straub

Jeremy Straub

The University of North Dakota’s OpenOrbiter program is providing an interdisciplinary learning experience for students from numerous STEM and non-STEM fields. OpenOrbiter allows student participants to experience not just the engineering and other technical aspects of the space program, it also involves students from diverse, non-STEM fields (including communications, entrepreneurship, management, visual arts, public policy and English). Traditional STEM fields such as mathematics, physics, electrical engineering, mechanical engineering, computer science and technology are also well represented. Students from specially programs at the University of North Dakota including atmospheric sciences, Earth System Sciences and Policy, aviation, Space Studies and Air Traffic …