Education Commons^™

Integrative Experiences Through Modeling And Simulation Of Mechatronic Systems, Mileta Tomovic, Cynthia Tomovic, Vukica M. Jovanovic, Cheng Y. Lin, Nan Yao, Petros J. Katsioloudis

Engineering Technology Faculty Publications

Learning is integrative lifelong process which requires continuous refreshing of old material and learning new material. This principle holds also for student experiences during their undergraduate studies. Students learn new material throughout their studies, and they may or may not have opportunity to use the material in different context and at different levels. As a result some of the acquired knowledge may be forgotten by the time student graduates or it may not be placed in the context of the overall program outcomes, thus material presented may not seem to have relevance to student's career. An effective method to address …

Developing A Faculty Learning Community To Support Writing Across Different Stem Disciplines, Vukica M. Jovanovic, Denise Tombolato-Terzic, Daniel P. Richards, Pilar Pazos, Megan Mckittrick, Julia Romberger, Otilia Popescu

Engineering Technology Faculty Publications

Writing to learn is one of the very important pedagogical strategies in a variety of disciplines. This concept is not specifically addressed in the majority of engineering courses. Hence, university initiatives such as the Quality Enhancement Plan (QEP), emerging out of accreditation and institutional assessments, are focusing on infusing scholarship from other disciplines (in this case English) for the purpose of student learning improvement. Engineering and Science programs do include various courses in English Composition as the part of the curriculum; however, writing is not embedded in all discipline-specific courses at the upper-division level. The program outlined here focuses on …

Learning Module On Electric Motors Modeling, Control, And Testing (Lm-Emmct), Ana Djuric, Vukica M. Jovanovic, Ece Yaprak, Wen Chen

Engineering Technology Faculty Publications

The objective of this paper is to develop and integrate a learning module on Electric Motors Modeling, Control and Testing (EMMCT) into the Electrical Engineering Technology (EET) and Mechanical Engineering Technology (MET) programs. Preparing future engineers to work in highly automated production requires proper education and training in mechatronics theory and applications. Although Engineering Technology programs at various universities offer various courses related to the controls, electrical motors, and automation, they are not including the same methods when it comes to the selection of appropriate electrical motor for a specific application in mechatronic system. MET student do have exposure to …

Examining The Potential Of Massive Open Online Courses (Moocs) At Historically Black Colleges And Universities (Hbcus), Andrés Castro Samayoa, Thai-Huy Nguyen, Marybeth Gasman, Felicia Commodore, Ufuoma Abiola

Educational Foundations & Leadership Faculty Publications

This article reviews the extant literature on distance learning technologies and historically Black colleges and universities (HBCUs). In the context of increased attention to massive open online courses (MOOCs), this article argues that HBCUs’ challenges with respect to their technological infrastructure suggests that they may be better suited to serve as advocates for bridging the persistent digital divide in the nation rather than adopters of MOOCs as a new instructional platform. The authors offer some suggestions for further research to ensure that HBCUS leaders can address larger systemic issues affecting the quality of education on their campuses.

Using Computer-Aided Design Software And 3d Printers To Improve Spatial Visualization, Petros Katsioloudis, Millie Jones

STEMPS Faculty Publications

Many articles have been published on the use of 3D printing technology. From prefabricated homes and outdoor structures to human organs, 3D printing technology has found a niche in many fields, but especially education. The education of technology and engineering students has come a long way from traditional instruction using hand drawings. Although drawings may still be a part of a students learning, computer technology has been embraced in this field for several years. With the introduction of AutoCAD technical drawing programs and now 3D printing, learners can use 3D printed models to develop their spatial abilities in technology and …

Strategies For Effective Online Course Development, Carol L. Considine, Michael W. Seek, Jon Lester

Engineering Technology Faculty Publications

Old Dominion University's Civil Engineering Technology (CET) program has a successful history of distance education, with more than half of the student population comprised of distance learners. Distance learning delivery has traditionally been via satellite and videostreaming with students having the choice of asynchronous or synchronous options. The university is in the process of updating their distance learning technologies and has encouraged programs to migrate to an online modality of distance learning. Developing and delivering online courses requires different competencies and facilitation skills than video streamed synchronous delivery or face to face instruction. A course delivered online changes the teaching …

Dissemination Of Microprocessor Courses Through Classroom And Interactive Cyber-Enabled Technologies, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Thomas B. Stout, Richard L. Jones

Engineering Technology Faculty Publications

The project is in the middle stages of the implementation. There seems to be a positive attitude of learning and using of the training system and curriculum package by all project staffs. Microchip, Inc. and microEngineering Labs, Inc. have donated supplies to support the hardware and software development for this project. The next objectives are team training, recruitment of interested trainees/teachers to participate in training for summers 2014, and assess the effectiveness of the implementations with teachers and students. Photo 2 is the project logo that describes all the concepts of this project.

Delivery Of Hands-On Technical Courses Through Real-Time Distance Learning, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Feng Jao

Engineering Technology Faculty Publications

It is generally believed that it is too challenging to deliver technical laboratory courses using distance learning technologies. The focus of this research was to develop strategies that may be used to address these challenges. A research team composed of faculty from several universities and community colleges explored what might be needed to make these types of technical laboratory course instruction possible using distance learning technologies. The team explored delivering a microcontroller embedded systems design course through audio-visual distance learning technologies. The team's research and development activities are discussed. These include focuses on the technical training equipment that had to …

Strategy Use Of Russian Pre-Service Tefl University Students: Using A Strategy Inventory For Program Effectiveness Evaluation, Alla Zareva, Anna Fomina

English Faculty Publications

The focus of the present study is on identifying categories of learning strategies that are mostly used by Russian university students in an English Linguistics Program with a TEFL concentration. The more specific goal of the study is to offer a model of evaluation of the effectiveness of TEFL-oriented programs in terms of the language learning strategies their students use and recognize as pedagogically applicable to their EFL environment. To this end, two groups of students were compared on their self-reported frequency of strategy use -- 1st year students (n = 23), who had just entered the program, and 4th …

Impact Of Project Based Learning In Introduction To Engineering/Technology Class, Alok K. Verma

Engineering Technology Faculty Publications

Project based learning (PBL) has a proven record as a teaching tool. Concepts that are often hard to grasp are made easy by the use of project based activities. The constructivism learning theory suggests that people learn better by actively participating in the process of learning. The Introduction to Engineering and Engineering Technology class has been modified to include project based learning kits to engage freshmen early on in the program. The goal is to demonstrate students the link between the scientific principles and their engineering applications. The course is team taught by faculty from various engineering and technology disciplines …

Simulation And Visualization Enhanced Engineering Education- Development And Implementation Of Virtual Experiments In A Laboratory Course, Sushil K. Chaturvedi, Kaustubh A. Dharwadkar

Mechanical & Aerospace Engineering Faculty Publications

This paper presents results from a National Science Foundation grant titled "Simulation and Visualization Enhanced Engineering Education", funded by the EEC division. Although the scope of the project is quite broad, embracing a wide range of courses in three engineering disciplines, the present work describes the results obtained from application of simulation and visualization for development and implementation of web-based virtual engineering laboratories. The present work leverages the advancement in hardware and software technologies to map physical experiments into web-based virtual experiments that can be used to enrich student's laboratory experience. Four physical experiments in the thermo-fluids laboratory course have …

Introducing Hands-On Simulation Activities In Introduction To Engineering & Engineering Technology Class To Keep Students Engaged, Alok Verma

Engineering Technology Faculty Publications

Low enrollment and high attrition rates have often plagued Engineering and Engineering Technology programs. Part of this problem can be attributed to the lack of engaging hands-on activities during the first year of instruction. Most engineering and technology programs require students to take natural science, math and some general education courses during the first two years with minimal technical content. To maintain student's interest in the technical career path, it is important that students establish a link between the theoretical knowledge and its application to solve real life problems early in their learning experience. Simulation based activities have a proven …

Cultural Competence And Curricula In Physical Therapist Professional Education, Beth Ernst Jamali

Theses and Dissertations in Urban Services - Urban Education

The purpose of this research was to examine the methods and degree to which content related to cultural competence is incorporated into current entry-level physical therapist education. Face-to-face interviews were performed with 10 program directors from various physical therapist education programs across the country to obtain in-depth information regarding cultural competence in the physical therapy curricula. A questionnaire was sent to all of the 193 accredited physical therapist education programs in the United States as a second means to collect information regarding the methods and extent to which cultural competence is included in the physical therapy curricula. Data were collected …

Privatization Initiatives: A Source For Engineering Economy Case Studies, Paul Kauffmann, Tarek Abdel-Salam, Keith Williamson, Carol L. Considine

Engineering Technology Faculty Publications

A case study method which reviews the basic structure of the circular A-76 privatization decision model is discussed. It highlights the possibilities for development of case studies that can challenge student teams to apply engineering economy tools while developing skills in a range of circular areas that are important to undergraduate engineering education and career success in engineering practice. Beyond building quantitative and qualitative business analysis skills, engineering economy cases can enhance student skills in other topical areas such as technical presentations, and report writing. The privatization initiatives and related decision models can also enhance human relations oriented skills in …

Lessons Learned And Best Practices For Using An Analytic Strategy Approach For The Creation Of Virtual Laboratories For Distance Learning In Engineering Technology, Anthony W. Dean, Carol L. Considine, Gary R. Crossman

Engineering Technology Faculty Publications

This paper describes the use of an Analytic Strategy Approach used in the development of a Virtual Automation and Controls Lab in the Mechanical Engineering Technology Program of the Engineering Technology Department at Old Dominion University. This paper looks at the three phases, as applied to the development of a virtual lab using an analytic strategy design:

(1) Formulation of the quantitative and qualitative approach to assist in decision process,

(2) Quantitative and qualitative analysis of the decision alternatives - within the decision context,

(3) Interpretation of the analysis results and implications for decision.

Project-Based Freshmen Engineering Courses In Civil Engineering Technology, Vernon W. Lewis Jr., Carol L. Considine

Engineering Technology Faculty Publications

Old Dominion University (ODU) has developed two fundamental courses for freshmen engineering students. The first course introduces the fundamentals of the practice of engineering including innovation, creativity, design and manufacturing, commercialization, teaming skills, environmental impact, and ethics. The second course is an exploration of engineering and engineering technology disciplines with an emphasis on projects. The purpose of these courses is to engage the students in the application of engineering early in their course of study with the hope that their interest will be reinforced and the likelihood of their being retained as students will increase. The courses are divided into …

An Integration Of Pc Hardware & Software In Teaching Engineering Technology Courses, Steve Hsiung, Richard Jones

Engineering Technology Faculty Publications

As technology advances, the price of a PC drops dramatically. This trend has resulted in PCs that are complex, powerful, and very affordable. Today's PC is a popular and essential tool in teaching software programming course(s) in C, C++, Visual Basic, or Java, running commercial software supporting courses in circuit simulation/design or circuit board layout, and acting as a workstation to gain access to the Internet or LAN networks. In most Engineering Technology curricula there is a limited amount of linkage between those PC applications. The actual effort to merge the hard-gained knowledge of hardware & software concepts together through …

Performing Interactively A Thermo-Fluids Laboratory Experiment In The Virtual Domain, Sushil K. Chaturvedi, Ali O. Akan, Tarek M. Abdel-Salam, A. Priyadershini

Mechanical & Aerospace Engineering Faculty Publications

This paper deals with the development of an experiment in the virtual domain for the undergraduate thermo-fluids laboratory in the mechanical engineering program. A physical experiment titled "Venturimeter as a Flow Measuring Device" is replicated as a computer-based experiment as part of the ongoing effort at Old Dominion University to develop web-based laboratories that would provide students hands-on experience in the virtual domain. A web-based module is developed that allows experimentation and data taking in a virtual setting much like in the physical experiment. This module incorporating the virtual venturimeter has been used by students to take data for several …

Active Learning In Distance Education, Carol Considine, Tony Dean

Engineering Technology Faculty Publications

Although there are many strategies for incorporating active learning exercises into the traditional classroom, incorporating active learning exercises in a distance education delivery format is more challenging. Active learning has been shown to enhance student performance and attitudes when used in conjunction with a traditional lecture format.¹ In order for students to be actively involved they must read, write, discuss, problem solve and engage higher-order thinking tasks such as analysis, synthesis, and evaluation.² The implementation of active learning exercises in distance education classes may help establish student rapport and enhance the feeling of community among the students in …

A Matlab-Based Upper Division Systems Analysis Course For Engineering Technology, William D. Stanley, Paul L. Kauffmann, Gary R. Crossman

Engineering Technology Faculty Publications

The Department of Engineering Technology at Old Dominion University offers TAC of ABET accredited baccalaureate programs in Civil Engineering Technology, Electrical Engineering Technology, and Mechanical Engineering Technology. All students are required to take traditional courses in algebra and trigonometry, as well as differential and integral calculus, at the freshman and sophomore levels. While these courses provided the necessary basic mathematical skills, it was difficult to justify the traditional upper-division mathematics courses such as differential equations, vector analysis, etc., as appropriate for the special needs of engineering technology students.

To address this issue, the Department has undertaken the development of a …

Meeting The Digital Literacy Needs Of Growing Workforce, Abha Gupta, Hassan Ndahi

Teaching & Learning Faculty Publications

Assessment of computer literacy needs from the perspective of potential workforce development is an important part of an educational program involving adult learners. About 22 percent of adults currently entering the labor market possess the technology skills that are required for 60% of new jobs. This paper describes the training provided to tutors and trainers of adult learning centers in Hampton Roads Virginia. Results showed that the trainees, prior to the training, had limited access to computer technology and needed training in incorporating computer technology in the curriculum. After the training, trainees have shown increased levels of comfort with various …

Engineering Management- The Minor Of Choice, William Peterson, Paul Kauffmann, Charles Keating, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

The minor in engineering management provides several real benefits to undergraduate engineering and engineering technology students, not the least of which can be a substantially larger starting salary. The other benefits it offers students are in the skill sets developed (project management, engineering economics, organization behavior / principles of management, and either statistical concepts or decision techniques), the preparation to start an engineering management graduate degree, and the bridging of the competency gaps identified in several national surveys. This paper addresses the benefits of the minor to engineering management programs.

An Instrument For Assessing Knowledge Gain In A First Course In Circuit Theory, Vishnu K. Lakdawala, Stephen A. Zahorian, Oscar R. González, Amit Kumar H., James Leathrum

Electrical & Computer Engineering Faculty Publications

Although there has been considerable research on the development and use of assessment instruments to measure the effectiveness of various pedagogical approaches to teaching introductory physics classes (Hestenes et al. 1, Hestenes et al 2, Hake 3, Saul et al. 4) and other science courses (for example, see Vosniadou 5), there is relatively little similar work that has been done to develop assessment instruments for the first circuit theory course that is taught in electrical and computer engineering. Given the large numbers of students nationwide who take such a course, the challenge this course presents to beginning engineering students, and …

Prototype Development For A Leak-Preventive Toilet Flush System- An Met Senior Design (Capstone) Project, Cheng Y. Lin

Engineering Technology Faculty Publications

A senior design (Capstone) project for three mechanical engineering technology students at Old Dominion University is described. A prototype design is presented to perform the functional test of a leak-preventive toilet system. There are two major leaks in the toilet water tank. In the first case, leaking occurs when the seal in the water tank becomes aged. The leak is very easy to detect visually, since the outside of the tank and the floor becomes wet. In the second case, leak occurs when the flapper valve can't complete shut off the water, due to corrosion or damage of the rubber …

Global Engineering In An Interconnected World: An Upper Division General Education Cluster At Old Dominion University, Sushil Chaturvedi, Gary Crossman, William Swart, Joseph Betit

Mechanical & Aerospace Engineering Faculty Publications

The “Global Engineering in an Interconnected World” cluster of courses fosters among students an awareness and understanding of global technology, quality assurance standards, and differences in cultural, communication, and business practices and their impact on a global work environment. This cluster will prepare the growing numbers of students who will accept employment with global firms or find themselves part of a merger or strategic alliance involving multinational corporations. This newly approved cluster of five courses described in the paper has been approved by the University for satisfying University upper-division general education requirements. As a consequence, students choosing this route to …

Selection Of Curricular Topics Using Extensions Of Quality Function Deployment, Paul Kauffmann, Abel Fernandez, Charles Keating, Derya Jacobs, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

Decision science can be an effective tool for enhancing organizational participation during strategic and complex decision making. This involvement develops a group consensus for relating organizational goals and the methods to achieve them. This paper describes an application of Quality Function Deployment (QFD) to define curricular topics that meet program objectives. Based on the ability of QFD to establish relationships, the model identifies the most important topics and quantifies their impact on meeting program goals. The model was developed to support restructuring of a Masters of Engineering Management degree program. The model supported decisions in selecting and prioritizing the required …

A Study Of Secondary Mathematics: Reports Impacting Curriculum, Philip B. Nelson

OTS Master's Level Projects & Papers

The research goals of this study include: 1. What influence did societal pressures of the time have toward the reports recommended curriculum? 2. What influences did technological developments of the time have toward the reports recommended curriculum? 3. What were or are unique (if any) mechanisms of the time that initiated the perceived need for reform in mathematics education? 4. What influence did changing college entrance requirements of the time have towards the reports recommended curriculum? 5. What curricula was recommended to ensure student study achieved the desired performance in mathematics?

Assessment Methods For Virtual Laboratories In Civil Engineering Technology, Carol L. Considine, Vernon W. Lewis Jr.

Engineering Technology Faculty Publications

Old Dominion University has developed an extensive distance learning system that includes 40 remote sites. A majority of the sites are located at community colleges. There are 30 sites in Virginia, three sites in North Carolina, one site in Washington State and one site in Arizona. In addition, there are four sites at Higher Education Centers in Virginia and one site at a local industrial facility. The Civil Engineering Technology curriculum requires three laboratory courses, which are a challenge in the distance learning environment because of the lack of laboratory equipment and computers at the broadcast sites. The three courses …