Education Commons^™

Barriers To Use Of Cross-Laminated Timber In Maine, Shane R. O'Neill

Forest Resources Faculty Scholarship

To increase understanding of both the adoption rate and in-state manufacturing of mass timber In Maine, the 131^st Legislature and Governor Mills passed LD 881, a resolve directing a study of the barriers facing cross-laminated timber In Maine and provide recommendations to promote their use in construction. This study was developed in response to the resolve. The study engaged 108 unique participants to define available training, education, and experiences across the stakeholders throughout the building lifecycle process in the state.

From this information, the following five recommendations are proposed:

1. Understand the policies and initiatives of other states to develop …

An Introductory Course In Electrical Circuits And Coding For Deaf And Deafblind Middle School Students, Becca Leininger, Christina Yang, Makayla Quinn, Jeffrey Jalkio, Rahaf Bahajry, Mellissa Ingabire, Annmarie Thomas

Journal of Science Education for Students with Disabilities

in is the first Deaf charter school in the United States, opening in 1993. The school serves students in the Twin Cities and Western Wisconsin from ages 2 to 21 who are primarily Deaf, DeafBlind and Hard of Hearing students, often being visual and/or tactile learners. All students who attend have Individualized Education Plans (IEPs) and fall under the special education category, defined by the Minnesota Department of Education as students who “have a disability and need specialized instruction” (Minnesota Department of Education, n.d.). At , students are instructed in American Sign Language (ASL) and English is primarily taught through …

Infographic: Girls’ Interest In Engineering, Dominique Russell

Teacher infographics

It's well-known that women are underrepresented in participation in STEM education and the STEM workforce. The 2021 Youth in STEM study surveyed participants about their awareness and perception of STEM subjects and careers. As this infographic shows, the findings reveal age is important for girls when it comes to interest in studying engineering.

Imagination To Innovation: Design Thinking For Young Learners, Lindsey Herlehy, Cassandra Armstrong

Publications & Research

Design thinking is the intersection of engineering design and social-emotional learning. Today’s learners must be empathetic problem solvers capable of defining problems and designing appropriate solutions to meet the needs of the user. In this session, participants will experience design thinking through literature-based scenarios appropriate for early learners. They will analyze and compare their own models to those of others and compose a lesson that will engage students in the design thinking process.

Cookie-Jar Alarms: An Analysis Of First-Grade Students’ Gendered Conceptions Of Engineers Following A Programming Design Task, April Mitchell, Kimberly H. Lott, Colby Tofel-Grehl

Teacher Education and Leadership Faculty Publications

Women remain underrepresented in engineering and broadening participation has recently become the focus of education reform efforts. Increased emphasis on K-12 engineering education calls for the design of learning environments and curricula that increase interest and conceptual understanding of engineering work, beginning in the early years of childhood. We seek to understand what works, for whom, in what contexts, how it works, and how engineering curricula can be improved to promote social justice. Here, we evaluate the impact of a curricular intervention designed to promote equity in elementary engineering education. The integrated STEM curriculum unit engages first-grade students in programming …

Spring 2022 Saturday Seminars Agenda, Shubha Tewari

Science and Engineering Saturday Seminars

No abstract provided.

Elementary Preservice Teachers Self-Efficacy And Confidence Teaching Engineering, Andrea Perrin

Theses and Dissertations--Science, Technology, Engineering, and Mathematics (STEM) Education

Engineering has become a popular topic within science standards in recent years. However, many teachers do not have experience teaching or doing engineering. With the possibility of engineering becoming a major part of the science curriculum, it is important that teachers are prepared and well equipped to teach and instruct engineering activities, lessons, and support. This quantitative study studied elementary preservice teachers’ self-efficacy and confidence with teaching engineering in the classroom after experiencing and teaching engineering activities. Overall, the implementation of the engineering activities had both positive and negative impacts on preservice teachers’ perceptions of themselves and teaching engineering in …

Supporting Students With An Autism Spectrum Disorder In Engineering: K-12 And Beyond, Jennifer L. Kouo, Alexis Hahn, Sarah Morton, Jay Gregorio

Journal of Science Education for Students with Disabilities

Individuals with disabilities, including individuals with an autism spectrum disorder (ASD), are underrepresented in science, technology, engineering, and mathematics (STEM) fields. With the importance of STEM skills in future employment and other disciplines, effective instructional strategies must be identified to enhance early and sustained access to STEM for students with ASD. However, the literature identifying effective STEM-specific supports and practices for this population of students is sparse and regarding engineering, there are no empirical studies that focus on teaching engineering skills to students with ASD. Therefore, the article aims to provide an overview of the available literature on the perspectives …

Build Your Own Body Mod: Empowerment Through Prototyping And Design, Anaiss Arreola, Katherine R. Ganim

Journal of Science Education for Students with Disabilities

When you don’t have a hand, what could you have instead? This article introduces the impact of inviting youth with disabilities to learn tools and technology to design their own solutions and advocate for their own future. This approach to programming is rooted in a mindset of designing WITH, not FOR. Not only are design outcomes improved when users are incorporated into the process, but this approach has been shown to improve confidence in creating one’s own solutions. These programs include hands-on “design-your-own-body-mod” workshops, as well as a budding inclusive design consultancy led by youth with disabilities. Through this programming, …

Scope Process: Fostering Students' Design Outcome Effectiveness, Andrew J. Hughes, Cameron D. Denson

Educational Leadership & Technology Faculty Publications

The purpose of this article is to help Technology and Engineering Educators scaffold engineering design and problem-solving experiences so that students taking technology and engineering courses will develop an improved ability to design. Technology and Engineering Education seems to increasingly focus on problem-solving, design, and engineering. Technology and Engineering Education is not the only discipline with this focus. The fact that both Science and Technology and Engineering Education are similarly focused on the teaching and learning of engineering begs the question of what separates technology and engineering educators from science educators in the teaching of engineering? Lewis (2004) cautioned that …

Infographic: Teacher Attitudes Towards Stem, Dominique Russell

Teacher infographics

Teachers can have a key influence on the career choices of young people, so knowing their attitudes towards STEM can help us understand how students are being influenced in the school environment. Here, we share results of a survey capturing teacher attitudes towards STEM.

Growing Capacity In Gifted And Talented Education Through Science, Technology, Engineering, Arts, And Mathematics (Steam), Sheron Mark, Chin-Wen Jean Lee, Peter A. Azmani

Kentucky Teacher Education Journal: The Journal of the Teacher Education Division of the Kentucky Council for Exceptional Children

A graduate-level gifted and talented education (GTE) course for in-service teachers was revised aiming to prepare teachers to integrate science, technology, engineering, arts, and mathematics (STEAM) education into existing curricula to create challenging learning experiences for students identified as gifted and talented. Two university-based teacher educators in science education and GTE, respectively, engaged in action research in order to develop and refine a semester-long STEAM project in the GTE course to accomplish this goal. In all, two elementary, one Music, and one World History teacher participated. Case study analysis explored the teachers’ approaches to developing STEAM-based lessons to expand their …

An Investigation Of The Effects Of Self-Efficacy On Stem Implementation, Caroline Buechel

Curriculum and Instruction Undergraduate Honors Theses

In order to equip students with the 21^st Century skills necessary for today’s society, STEM education must be properly implemented in school curricula (Lamb, Akmal, & Petrie, 2015). To do so, it is important for teachers to possess both proficient knowledge of the subject matter and confidence towards the implementation of STEM. A person’s beliefs about their ability is known as their self-efficacy (Bandura 1997). Related to education, Bandura notes that this self-efficacy affects a teacher’s views on their ability to handle tasks, obligations, and challenges related to a challenge (1997). Additionally, numerous studies indicate that this self-efficacy in …

Students’ With Blindness And Visual Impairments Level Of Engagement In Science And Engineering Practices, Tiffany A. Wild, Natalie Shaheen, Danene K. Fast, Julia Averill, Karen Koehler, Kathleen Farrand

Journal of Science Education for Students with Disabilities

There is a lack of research on science-process skills and abilities of students with blindness and visual impairments to apply those skills (Jones, Forrester, Robertson, Gardner, & Taylor, 2012). This study aims to provide additional information on how students with blindness and visual impairment are engaged in science and engineering practices in order for teachers to gain a better understanding of how students with visual impairments can learn engineering practices. The Student Inquiry Review (Hilson & Wild, 2015) that examines the scientific and engineering practices as defined in the Framework for K-12 Science Education: Practices, Crosscutting Concepts and Core Ideas …

Enabling And Threatening Factors Affecting Persistence. A Qualitative And Quantitative Study On Rural First-Generation Stem Students’ And Stem Faculty's Perspectives., Travis A. Miller

Graduate Theses, Dissertations, and Problem Reports

This study focuses on the factors that enable and threaten rural first-generation STEM students’ persistence. Limited empirical studies are available that focus on rural first-generation STEM majors’ persistence. Quantitative analysis was conducted using Kruskal Wallis H and Mann-Whitney U tests to determine any significant differences with the survey results. Content and thematic analysis was conducted on the student and faculty interviews to determine themes of enabling and threatening factors affecting persistence.

Enabling factors affecting persistence were found to be: Drive or Motivation, Experiences and skills, and Support. These were both faculty and student interview themes whereas a …

Principles Of Engineering, Edu 4480, Course Outline, Euisuk Sung

Open Educational Resources

This course is a laboratory-based capstone course providing resources about engineering and engineering design methodology to enable the student teacher to study the relationship among mathematics, science and engineering. Focus is on the integration of the content of these disciplines into the secondary school technology curriculum and to stimulate student interest in pursuing engineering and technology careers.

Nres/Bsen 468/868: Wetlands, Tiffany L. Messer

UNL Faculty Course Portfolios

Wetlands (468/868) is a multidisciplinary 4 hr fourth year/graduate level course that includes two 90 min lectures and a weekly 3 hr laboratory. The course is crosslisted in the School of Natural Resources and Biological Systems Engineering Department. The course is typically comprised of 20-30 students with approximately 30% engineering students and 70% natural resources students in the majors of biological systems engineering, water science, fisheries and wildlife, and environmental restoration science. Majority of the students that participate in this course intend to have careers in consulting, government, and/or the nonprofit conservation sectors. Each of these sectors require knowledge of …

Course Portfolio For Assessing Student Learning Surrounding Biological Examples In Bsen244: Thermodynamics Of Biological Systems, Forrest M. Kievit

UNL Faculty Course Portfolios

Thermodynamics is a course required in many engineering disciplines as it covers concepts utilized in many upper level engineering courses. In the Biological Systems Engineering Department at the University of Nebraska – Lincoln, this course, in a way, acts as a gateway to the major since this will be one of the first classes where the students must apply and hone their problem-solving skills. This course was developed to allow students in the department to have access to a thermodynamics course that relates to their major area of interest – biological systems. However, many concepts in thermodynamics do not have …

Institutional Barriers To Black And Latino Male Collegians’ Success In Engineering And Related Stem Fields, Leroy Long Iii, Trevion S. Henderson, Michael Steven Williams Dr,

Publications

Diverse people and perspectives are needed to spur innovation and tackle societal problems. A wealth of untapped intellectual and economic potential exists among historically underrepresented racial/ethnic groups – including Blacks and Latinos – who have not had equitable access to engineering and related STEM fields. For Blacks and Latinos who are accepted into engineering and related STEM fields, they face a number of barriers to their success which lead to low retention and graduation rates. In historically male-dominated fields such as engineering and related STEM disciplines, Black and Latino men have remained underrepresented at the student and faculty ranks. To …

Making Connections: Evaluation Of A Professional Development Program For Teachers Focused On Stem Integration, Judy Lambert, Carmen Cioc, Sorin Cioc, Dawn Sandt

Journal of STEM Teacher Education

This article reports on a 2-year evaluation of a STEM integration professional development (PD) program for 40 math, science, and special education teachers in Grades 5–9 from a large Midwestern public school district. The National Research Council’s framework for integrated STEM education (Honey, Pearson, & Schweingruber, 2014) was used to explain the goals, outcomes, nature and scope, and implementation of the program. Teachers were measured on their growth in STEM content knowledge, technology integration, teaching confidence, pedagogical beliefs, and impact of PD. Increases resulted in all these areas with statistically significant improvements in most of them, particularly in Year 2. …

Forms Of Science Capital Mobilized In Adolescents’ Engineering Projects, Amy Wilson-Lopez, Christina M. Sias, Allen Smithee, Indhira María Hasbún

Teacher Education and Leadership Faculty Publications

The purpose of this multiple case study was to identify the forms of science capital that six groups of adolescents mobilized toward the realization of their self-selected engineering projects during after-school meetings. Research participants were high school students who self-identified as Hispanic, Latina, or Latino; who had received English as a Second Language (ESL) services; and whose parents or guardians had immigrated to the United States and held working class jobs. The research team used categories from Bourdieusian theories of capital to identify the forms of science capital mobilized by the participants. Data sources included transcripts from monthly interviews and …

Driven By Beliefs: Understanding Challenges Physical Science Teachers Face When Integrating Engineering And Physics, Emily A. Dare, Joshua A. Ellis, Gillian H. Roehrig

Joshua A. Ellis

It is difficult to ignore the increased use of technological innovations in today’s world, which has led to various calls for the integration of engineering into K-12 science standards. The need to understand how engineering is currently being brought to science classrooms is apparent and necessary in order to address these calls for integration. This multiphase, mixed-methods study investigated the classroom practices and beliefs of high school physical science teachers following an intensive professional development on physics and engineering integration. Classroom observations showed that teachers new to incorporating engineering into their physical science classrooms often struggled to maintain focus on …

Implementing Elementary School Next Generation Science Standards, Kathy Kennedy

Walden Dissertations and Doctoral Studies

Implementation of the Next Generation Science Standards requires developing elementary teacher content and pedagogical content knowledge of science and engineering concepts. Teacher preparation for this undertaking appears inadequate with little known about how in-service Mid-Atlantic urban elementary science teachers approach this task. The purpose of this basic qualitative interview study was to explore the research questions related to perceived learning needs of 8 elementary science teachers and 5 of their administrators serving as instructional leaders. Strategies needed for professional growth to support learning and barriers that hamper it at both building and district levels were included. These questions were considered …

An Analysis Of Secondary Integrated Stem Lesson Plans: Common Characteristics, Learning Expectations And The Impact From The Teacher's Definition Of I-Stem, Jacob Hayward

Graduate Theses and Dissertations

This qualitative study investigated teachers’ understanding of their definition of I-STEM (Integrated STEM education), how those understandings manifested into lessons and associated lesson artifacts, how they assessed students in such lessons, and what factors or rationales supported their ability to conduct or not conduct I-STEM lessons. A survey was sent to the members of four professional organizations representing I-STEM disciplines to solicit their participation in this project. Ten teachers ranging from grades 9-12 participated in this study. Of those who responded, six teachers identified with National Science Teachers Association (NSTA), three teachers selected International Technology and Engineering Education Association (ITEEA), …

An Analysis Of Support For Elementary Engineering Education Offered In The Science Teacher Journal Science And Children, Tawnicia Meservy Stocking

Theses and Dissertations

Teachers use professional journals such as Science and Children for ideas to incorporate into their own teaching. As such the purpose of this study was to investigate the support offered for integrating engineering education into science instruction. The research methodology for this was a qualitative content analysis inferring categories based on the information presented. Twenty-three issues of the journal were read, spanning two and a half volume years. The categories that emerged were mentioning, implementing, and integrating. Deeper examples of integration were found to match the mapping and infusion strategies presented by the National Academy of Engineering and National Research …

An Examination Of Accessible Hands-On Science Learning Experiences, Self-Confidence In One’S Capacity To Function In The Sciences, And Motivation And Interest In Scientific Studies And Careers., Mick D. Isaacson, Cary Supalo, Michelle Michaels, Alan Roth

Journal of Science Education for Students with Disabilities

This study examined the potential relationship of accessible hands-on science learning experiences to the development of positive beliefs concerning one’s capacity to function in the sciences and motivation to consider science as a college major and career. Findings from Likert survey items given before and after engaging in accessible hands-on science laboratories show that students who were blind or had low vision (BLV) were more likely to agree with the following items after engaging in accessible science experiences: 1) I plan on enrolling as a science major in college; 2) My educational experiences, so far, have given me the …

Professional Development For The Integration Of Engineering In High School Stem Classrooms, Jonathan E. Singer, Julia M. Ross, Yvette Jackson-Lee

Journal of Pre-College Engineering Education Research (J-PEER)

Science, Technology, Engineering, and Mathematics (STEM) education in the U.S. is in transition. The recently published A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas as well as the Next Generation Science Standards are responsive to this call and clearly articulate a vision that includes engineering practices as key components. This shift presents significant challenges to school districts owing to a stark lack of research-based engineering-focused instructional materials and corresponding teacher professional development. The purpose of this study was to investigate the impact of a professional development program on high school STEM teachers’ ability to enact design-based …

Ambiguity In Speaking Chemistry And Other Stem Content: Educational Implications, Mick D. Isaacson, Michelle Michaels

Journal of Science Education for Students with Disabilities

Ambiguity in speech is a possible barrier to the acquisition of knowledge for students who have print disabilities (such as blindness, visual impairments, and some specific learning disabilities) and rely on auditory input for learning. Chemistry appears to have considerable potential for being spoken ambiguously and may be a barrier to accessing knowledge and to learning. Educators in chemistry may be unaware of, or have limited awareness of, potential ambiguity in speaking chemistry and may speak chemistry ambiguously to their students. One purpose of this paper is to increase awareness of potential ambiguity in speaking chemistry and other STEM fields …

Engineering A Dynamic Science Learning Environment For K-12 Teachers, Patricia Hardré, Mark Nanny, Hazem Refai, Chen Ling, Janis Slater

Dr. Chen Ling

The present study follows a cohort of 17 K-12 teachers through a six-week resident learning experience in science and engineering, and on into the planning and implementation of applications for their classrooms. This Research Experiences for Teachers (RET) program was examined using the strategic approach of design-based research, with its fluid, adaptive management of the complexity of authentic learning "in situ" and its attentive documentation of expected and unexpected events, in process and products, to capture the richness of teachers' and mentors' experiences. Research on effective teacher professional development, adult learning, situated cognition, and learning transfer were utilized to inform …

Driven By Beliefs: Understanding Challenges Physical Science Teachers Face When Integrating Engineering And Physics, Emily A. Dare, Joshua A. Ellis, Gillian H. Roehrig

Journal of Pre-College Engineering Education Research (J-PEER)

It is difficult to ignore the increased use of technological innovations in today’s world, which has led to various calls for the integration of engineering into K-12 science standards. The need to understand how engineering is currently being brought to science classrooms is apparent and necessary in order to address these calls for integration. This multiphase, mixed-methods study investigated the classroom practices and beliefs of high school physical science teachers following an intensive professional development on physics and engineering integration.

Classroom observations showed that teachers new to incorporating engineering into their physical science classrooms often struggled to maintain focus on …