Education Commons^™

Barriers To Use Of Cross-Laminated Timber In Maine, Shane R. O'Neill

Forest Resources Faculty Scholarship

To increase understanding of both the adoption rate and in-state manufacturing of mass timber In Maine, the 131^st Legislature and Governor Mills passed LD 881, a resolve directing a study of the barriers facing cross-laminated timber In Maine and provide recommendations to promote their use in construction. This study was developed in response to the resolve. The study engaged 108 unique participants to define available training, education, and experiences across the stakeholders throughout the building lifecycle process in the state.

From this information, the following five recommendations are proposed:

1. Understand the policies and initiatives of other states to develop …

Innovation For The Air: A Brief History Of Worldwide Aviation, Lauren Plumley

Honors Theses

The purpose of this report is to present a brief but comprehensive overview of the variety of innovations related to aviation, and to discuss their impact on scientific progress over the course of human history. Relevant discoveries from the fields of physics and aerodynamics, and the numerous technologies built based upon these discoveries, are discussed over a period ranging from ancient times to the twenty-first century. The scope of this report is an overview of the development of powered and unpowered aircraft, including lighter-than-air, heavier-than-air, and aerospace technologies. Aviation developments were generally not limited to one specific country or person, …

Enhancing Student Veterans' Self-Efficacy And Sense Of Belonging In A Targeted Learning Community: Four Years Of Qualitative Results, Anthony W. Dean, Cynthia Tomovic, Vukica Jovanovic, Kim E. Bullington

Engineering Technology Faculty Publications

Eight semesters of qualitative data, collected over four academic years, are presented from a project that resulted in the development of a student professional learning community of high-achieving, low-income engineering and engineering technology student veterans. In the context of this project, student veterans received academic, professional, and financial support that helped them to be successful in school and to prepare them for a career in the STEM workforce. As adult learners, students in this learning community were a vital part of the curriculum development which resulted in increasing the students’ interest and buy-in. Typically, adult learners have lower levels of …

Engineering Stress Culture In Project-Based Engineering Programs, Lin Chase, Catherine Sleezer, Robert Sleezer, Michelle Soledad

Integrated Engineering Department Publications

Background: This research paper examines engineering stress culture in the context of project-based learning engineering programs at the university level. Multiple authors have reported that the culture of engineering and engineering education can be stressful and exclusive. A study conducted by Jensen and Cross [9] found that measures of inclusion such as "Department Caring" and "Department Pride" were negatively correlated with stress, anxiety, and depression. We used the approach developed by Jensen and Cross to examine stress culture in the context of three project-based learning engineering programs.

Purpose: Our goal was to establish a baseline of measures of mental health …

What Do Undergraduate Engineering Students At The Onset Of Emergency Hybrid Learning During Covid-19 Say About Peer Mentorship?, Darcie Christensen, Idalis Villanueva

Integrated Engineering Department Publications

This complete research paper addresses the perceptions of undergraduate engineering students during the onset of the worldwide pandemic (COVID-19) in an engineering college at a western institution of the United States. Specifically, these students were asked about their perceived needs around peer mentorship amidst pivoting between hybrid and in-person learning at the onset of COVID-19.

Mentorship is defined as the interaction between two individuals whose goal is to help one another in psychosocial matters, support personal and professional growth, and provide career guidance. Generally, there are two main types of mentorships recognized: traditional and peer. Traditional mentorship involves a mentor …

Byoe: Making Connections Between Fluid Mechanics And Abstract Painting, Thomas Shepard, Charles Mossey, Jacob Swanson, Colin Huntington, Mary Murphy

Integrated Engineering Department Publications

This bring your own experiment (BYOE) paper details two iterations of a hands-on painting project that has been well-received by fluid mechanics students. In the conception of this project the authors have explored many of the relevant parameters for different painting techniques: drip painting, pendulum painting spray painting, and acrylic pours – one subset of which is spinning pours. These methods were explored both in terms of relevant fluid mechanic phenomenon as well as with hands-on experimentation, reviewing instructional videos and talking with artists. These efforts led to creation of short instructional videos that students can watch before undertaking their …

"But I'M Not An Engineer"...Collaboration Between A Librarian And An Upper Division Project-Based Engineering Program, Heidi J. Southworth, Rebecca Bates, Robert Sleezer

Library Services Publications

Since 2013, a librarian at Minnesota State University, Mankato has collaborated with faculty and students in an upper division project-based engineering program. While having several years of experience in university libraries plus advanced degrees in history, the librarian had a limited background in science, engineering, and technology, and lacked a formal engineering degree. At first glance, this match may appear to be a recipe for failure. Indeed, in those first few years, the librarian’s angst about the missing engineering degree caused many sleepless nights of worry and concern. However, there came a time when the words “but I am not …

"But I'M Not An Engineer"...Collaboration Between A Librarian And An Upper Division Project-Based Engineering Program, Heidi J. Southworth, Rebecca Bates, Robert Sleezer

Library Services Publications

Since 2013, a librarian at Minnesota State University, Mankato has collaborated with faculty and students in an upper division project-based engineering program. While having several years of experience in university libraries plus advanced degrees in history, the librarian had a limited background in science, engineering, and technology, and lacked a formal engineering degree. At first glance, this match may appear to be a recipe for failure. Indeed, in those first few years, the librarian’s angst about the missing engineering degree caused many sleepless nights of worry and concern. However, there came a time when the words “but I am not …

Climate Justice In Engineering Education, Tyler J. Morgan, Donna Riley, Caroline M. Camfield

Discovery Undergraduate Interdisciplinary Research Internship

The goal of this research is to design a learning module for Purdue first-year engineering (FYE) students to learn climate fundamentals, and the role of engineers in responding to climate justice challenges. There is a lack of climate material within these classes currently, leading to a lack of climate conscious engineers in the future. The project entailed reviewing and synthesizing a wide variety of previous research on climate change education in engineering, including key learning objectives and their assessment. Because one of the key foci of the first-year engineering sequence relates to data analysis and management, we focused our work …

Society Dilemma Of Computer Technology Management In Today's World, Iwasan D. Kejawa Ed.D

School of Computing: Faculty Publications

Abstract - Is it true that some of the inhabitants of the world’s today are still hesitant in using computers? Research has shown that today many people are still against the use of computers. Computer technology management can be said to be obliterated by security problems. Research shows that some people in society feel reluctant or afraid to use computers because of errors and exposure of their privacy and their sophistication, which sometimes are caused by computer hackers and malfunction of the computers. The dilemma of not utilizing computer technology at all or, to its utmost, by certain people in …

Designing And Implementing A Novel Graduate Program To Develop Transdisciplinary Leaders In Urban Sustainability, Megan M. Wallen, Ingrid Guerra-Lopez, Louay Meroueh, Rayman Mohamed, Andrea Sankar, Pradeep Sopory, Ryan Watkins, Donna R. Kashian

Biological Sciences Faculty Research Publications

Urban settings, where >50% of the world's population resides, are increasingly faced with environmental challenges that threaten their sustainability. Aging infrastructure, water and air pollution, and increasing recognition of environmental injustices highlight the need for professionals to employ complex scientific reasoning across disciplines where they can effectively address the multifaceted issues of urban sustainability. Here we present an innovative model for preparing the next generation of public, private, and academic leaders to address complex problems in urban sustainability. Specifically, we outline the design and implementation of an integrated, adaptable graduate training program, with the goals of science leadership, curriculum relevancy, …

Scope Process: Fostering Students' Design Outcome Effectiveness, Andrew J. Hughes, Cameron D. Denson

Educational Leadership & Technology Faculty Publications

The purpose of this article is to help Technology and Engineering Educators scaffold engineering design and problem-solving experiences so that students taking technology and engineering courses will develop an improved ability to design. Technology and Engineering Education seems to increasingly focus on problem-solving, design, and engineering. Technology and Engineering Education is not the only discipline with this focus. The fact that both Science and Technology and Engineering Education are similarly focused on the teaching and learning of engineering begs the question of what separates technology and engineering educators from science educators in the teaching of engineering? Lewis (2004) cautioned that …

Building A Functional Cardiograph Over Four Semesters, Part 3: Estimating Heart Rate And Respiration Rate In The Time And Frequency Domains Using Matlab, Gail Baura, Francisca Fils-Aime, Vincent Chiun-Fan Chen, Leanne Kallemeyn

Engineering Science Faculty Publications

At Loyola University Chicago (LUC), all engineering courses are taught using a mandatory minimal lecture style, where the majority of course meeting time is devoted to group activities. Each activity may take place during that course meeting only, over the entire semester, or over multiple semesters. Curricular contextual threads take place over multiple semesters. One such contextual thread is the cardiograph project, whereby students build a functional cardiograph that estimates heart rate (HR) and respiration rate (RR) over four semesters (first, third, fifth, and sixth semesters). In Part III, students acquire their own electrocardiogram (ECG) using a custom motherboard, with …

Stem Education In The Early Childhood Classroom, Julia Biagiotti

Honors Program Theses and Projects

This qualitative study focuses on the type of STEM education students are getting at the early childhood level (PK-2). Based on gaps found in literature, an interview protocol was created and six participants with various careers in the field of STEM education were interviewed. The research was concentrated on trying to determine what components of STEM education make it successful in the early childhood classroom. All of the interview responses were analyzed and coded and determined the results found below. A few integral parts of a successful STEM education seem to be curiosity, asking questions and a hands-on component, but …

Characterizing Students’ Engineering Design Strategies Using Energy3d, Jasmine Singh, Viranga Perera, Alejandra Magana, Brittany Newell

Discovery Undergraduate Interdisciplinary Research Internship

The goals of this study are to characterize design actions that students performed when solving a design challenge, and to create a machine learning model to help future students make better engineering design choices. We analyze data from an introductory engineering course where students used Energy3D, an open source computer-aided design software, to design a zero-energy home (i.e. a home that consumes no net energy over a period of a year). Student design actions within the software were recorded into text files. Using a sample of over 300 students, we first identify patterns in the data to assess how students …

The Influence Of Policy Implementation In The Midwest: How A Sstem Program Broadens Participation And Enhances Engineering Identity For Community College Students, Sarah L. Rodriguez, Maria L. Espino, Brian D. Le, Kelly J. Cunniham

Faculty Publications

This qualitative research study describes how a Midwest community college’s implementation of an Scholarships in Science, Technology, Engineering, and Mathematics (SSTEM) program influences engineering identity development for its students with financial need. Using a phenomenological approach, the study finds that the program enables community college students to have greater financial freedom and an ability to focus on engineering identity. In addition, the SSTEM program enhances student connections with STEM faculty, program staff, and peers. The study highlights the need for creating spaces for engineering identity development, developing connections between faculty, staff, and students, and enhancing transfer connections through different experiences. …

Engineering Technology Programs Outreach To K-12, Alok Verma

Engineering Technology Faculty Publications

The Engineering Technology (ET) degree emphasizes hands-on application and implementation. Graduates holding this degree play a valuable role in economically growing the US and keeping it internationally competitive. However, “engineering and engineering technology, are widely misunderstood… the public sector (employers, students, high-school counselors, politicians and the general public) needs to be educated as to the particular value of each,” according to Engineering.com [1]. The National Academy of Engineering states, “Unlike the much better-known field of engineering, engineering technology is unfamiliar to most Americans and goes unmentioned in most policy discussions about the US technical workforce. This is even though workers …

Covid-19_Umaine News_Umaine Students Get Immersive Experience In Engineering Education, University Of Maine Division Of Marketing And Communications

Division of Marketing & Communications

Screenshot of UMaine News press release regarding Asli Sezen-Barrie, associate professor of curriculum, assessment and instruction in the University of Maine College of Education and Human Development redesigning her class on Teaching Science in the Secondary School to provide more opportunities for preservice teachers at UMaine to learn about engineering concepts and meet with engineers.

The Effects Of Computer And Information Technology On Education, Iwasan D. Kejawa Ed.D

School of Computing: Faculty Publications

In the society of ours, is it true really that computers and information technology have contributed immensely to the way we learn? After observing and reading various educational paraphernalia and scanning the environment research has shown that the educational systems have greatly been impacted by computers and information technology. With the growth of technology, the ways we learn have been improved tremendously. Innovative technologies have contributed to the innovation of learning in the education arena and outside. The traditional ways of conveying instructions to learners have been augmented with the use of computers information technologies. The educational system of our …

Covid-19_Umaine News_Virtual Groundbreaking For Ferland Engineering Education And Design Center, University Of Maine Division Of Marketing And Communications

Division of Marketing & Communications

Screenshot of Maine News release regarding the virtual groundbreaking for the University of Maine's Ferland Engineering Education and Design Center.

College Of Engineering_Pandemic Related Projects, Courses And Materials, University Of Maine College Of Engineering

College of Engineering

Report from the University of Maine College of Engineering chairs/faculty and center directors detailing projects directly relevant to COVID-19 and course materials/strategies/assignments/approaches to create infrastructures of support for students in the face of COVID-19.

Exploring The Impact Of Brexit On Uk’S Engineering Education Sector From The Perspective Of European Students And Staff, I. Direito, B. Williams, Shannon Chance

Conference papers

The UK higher education attracts a far higher number of international academics from all over the world, who teach and do research, than any other country in Europe, being only surpassed by Switzerland [1]. Moreover, because engineering itself is considered a global field, this sub-field of higher education also relies on international mobility more than most academic disciplines in the UK The impact of the United Kingdom European Union membership referendum of June 2016, commonly referenced as the Brexit referendum, is still unfolding and under continuing analysis. However, it is widely anticipated that it will disrupt European student and staff …

Inclusion & Marginalization: How Perceptions Of Design Thinking Pedagogy Influence Computer, Electrical, And Software Engineering Identity, Sarah L. Rodriguez, Erin E. Doran, Rachel E. Friedensen, Elizabeth Martínez-Podolsky, Paul S. Hengesteg

Faculty Publications

Engineering identity plays a vital role in the persistence of engineering students, yet limited research exists on how particular pedagogical approaches influence engineering identity at the college level. This qualitative case study explored how undergraduate student perceptions of design thinking pedagogy influence computer, electrical, and software engineering identity. The study found that design thinking pedagogy reinforces the recognition of an engineering identity, particularly for those from historically marginalized groups (i.e., women, people of color). Intentional implementation, including organization and framing of design thinking pedagogy, was an essential foundation for fostering student interest in the course and connecting to their role …

Early Engineering Experience (E3) Initiative, Danielle Nicole Carter, Rafael E. Landaeta

Engineering Management & Systems Engineering Faculty Publications

This Work in Progress paper details an initiative designed to broaden exposure and attract increased interest in the study of engineering of a minority-serving institution (MSI) with a plurality of races represented. The University's student population where this initiative is being implemented consists of 26.2% African American and 6% that identify with two or more races. In contrast, the College of Engineering in this University is 20% African American; the freshmen class makes up 6.3% of this figure. By USDOE standards, this characterization is indicative of a predominantly white institution (PWI). According to the Bureau of Labor Statics, underrepresented minorities …

Exploring The Relationship Between Teamwork Skills And Team Members' Centrality, Francisco Cima, Pilar Pazos, Ana Maria Canto

Engineering Management & Systems Engineering Faculty Publications

The present paper describes an exploratory study of small teams working on a four-month project as part of a graduate engineering program. The research had two primary goals. The first was to utilize the log files from shared repositories used for team collaboration to describe the network structure of the teams. The second was to determine whether the network centrality of any individual team member is associated with their teamwork skills and attitudes towards the collaboration platform. The relationship between teamwork skills, attitudes towards the collaboration technology, and the centrality index was explored using Pearson correlations. A total of 35 …

Engineering Students’ Perceptions Of Belongingness In Civil Engineering, Lisa Benson, Candice Bolding, Jennifer Harper Ogle, Catherine Mcgough Spence, Joseph Murphy, Rachel Lanning

Integrated Engineering Department Publications

Prior research shows that engineering students with low feelings of belongingness tend to switch to non-technical majors. With the understanding that aspects of student motivation, identity, and personality, as well as their academic performance, affect their sense of community in engineering, this study seeks to assess these student attributes over time. The context for this study is a single civil engineering program that is undergoing both curricular and cultural changes as part of an NSF-funded project. The data and findings presented here are part of a larger study of how student attitudes and beliefs change during their experiences in a …

Law School News: Roger Williams University Announces 11th President 02-13-2019, Ed Fitzpatrick

Life of the Law School (1993- )

No abstract provided.

Exploring Engineering Club, Samantha Corey, Stephen Yaghmour

Honors Expanded Learning Clubs

Exploring Engineering Club provides an introduction to a variety of engineering problems and piques the students’ interest in engineering by accompanying the information with hands-on problem solving activities mainly related to structural engineering. The activities will often be done in teams which will teach good teamwork skills, as well as problem solving and critical thinking.

Scaffolding Project-Based Learning In An Engineering And Education Partnership Using Open-Access Technology, Pilar Pazos, Stacie I. Ringleb, Jennifer Kidd, Rachel Jones

Engineering Management & Systems Engineering Faculty Publications

This paper describes the use of a freely-accessible open-source platform based on Google Apps for Education that combines Google Sites, Google Docs, Google Drive, Google Hangouts and script language in a custom-based interface that supports collaborative service-learning projects for teams of Engineering and Education students. The approach discussed in this paper was successful in promoting collaboration among students from two different disciplines working remotely. The analysis suggests that balanced participation in the team, presence of shared goals and clear roles that emphasized individual and collective responsibilities were key to a successful interdisciplinary project experience. While many students still reported struggling …

Instilling An Entrepreneurial Mindset In A New Generation Of First-Year Engineering Students Through A Graphics Course Project, Lulu Sun, Leroy Long Iii

Publications

Each year, an increasing number of engineering start-up companies emerge in the U.S. and around the world. Innovation and entrepreneurship have never been so pronounced, especially in science, technology, engineering, and mathematics (STEM) fields. How can we train engineering students to be more entrepreneurially-minded so they are well-equipped to become global innovators? Engineering educators can use entrepreneurially-minded learning activities to help students develop an entrepreneurial mindset, which is a set of beliefs, attitudes, and behaviors. At a mid-sized Southeastern private institution, we used an open-ended team project and an end-of-semester poster competition within a freshman-level engineering graphics course to encourage …