Architecture Commons^™

Cold-Formed Steel Strength Predictions For Combined Bending And Torsion, Yu Xia, Robert S. Glauz, Benjamin W. Schafer, Michael Seek, Hannah B. Blum

Engineering Technology Faculty Publications

Locally slender cross-section members, such as cold-formed steel Cee and Zee sections, are susceptible to significant twisting and high warping torsion stresses. Torsion considerations are complicated by whether it is derived as a first-order effect from loading or a second-order effect from instability. The current design for combined bending and torsion interaction has some limitations, including only considering the first yield in torsion and ignoring the cross-section slenderness in torsion. Previous work has derived a simple uniform equation to predict the bimoment capacity and two bimoment strength curves for local and distortional buckling under torsion only. This work is extended …

Strengthening Urban Resilience: Understanding The Interdependencies Of Outer Space And Strategic Planning For Sustainable Smart Environments, Ulpia-Elena Botezatu, Olga Bucovetchi, Adrian V. Gheorghe, Radu D. Stanciu

Engineering Management & Systems Engineering Faculty Publications

The conventional approach to urban planning has predominantly focused on horizontal dimensions, disregarding the potential risks originating from outer space. This paper aims to initiate a discourse on the vertical dimension of cities, which is influenced by outer space, as an essential element of strategic urban planning. Through an examination of a highly disruptive incident in outer space involving a collision between the Iridium 33 and Cosmos 2251 satellites, this article elucidates the intricate interdependencies between urban areas and outer space infrastructure and services. Leveraging the principles of critical infrastructure protection, which bridge the urban and outer space domains, and …

A Review Of Current Construction Guidelines To Inform The Design Of Rammed Earth Houses In Seismically Active Zones, David Thompson, Charles Augarde, Juan Pablo Osorio

Articles

Sustainability in the materials we use for construction is a prime concern, focusing on reducing the embodied energy and carbon footprints of the materials used. The cement used in concrete products is responsible for a significant proportion of Man's CO2 emissions and its production requires substantial energy input, as do fired clay products. For this reason, products formed from unfired earthen materials are of increasing interest and the current challenges include devising means of robust design for strength and to address durability concerns. One form of earthen construction that employs an in-situ method is rammed earth, and it is a …

Law School News: National Housing Advocate Named To Lead Rwu's New Real Estate Initiatives 02/08/2022, Roger Williams University School Of Law

Life of the Law School (1993- )

No abstract provided.

Ten Questions Concerning Well-Being In The Built Environment, Sergio Altomonte, Joseph Allen, Philomena M. Bluyssen, Gail Brager, Lisa Heschong, Angela Loder, Stefano Schiavon, Jennifer A. Veitch, Lily M. Wang, Pawel Wargocki

Durham School of Architectural Engineering and Construction: Faculty Publications

Well-being in the built environment is a topic that features frequently in building standards and certification schemes, in scholarly articles and in the general press. However, despite this surge in attention, there are still many questions on how to effectively design, measure, and nurture well-being in the built environment. Bringing together experts from academia and the building industry, this paper aims to demonstrate that the promotion of well-being requires a departure from conventional agendas. The ten questions and answers have been arranged to offer a range of perspectives on the principles and strategies that can better sustain the consideration of …

Achieving Sustainability Through Reducing Construction Waste During The Design Process: A Value Management Perspective, Ayman Ahmed Ezzat Othman, Sherouk Mohamed Abdelrahim

Architectural Engineering

Purpose:

The purpose of this paper is to investigate the role of Value Management towards achieving sustainability through reducing the construction waste during the design process.

Design/methodology/approach

To achieve the abovementioned aim, a research methodology consisting literature review and survey questionnaire is designed to achieve the following objectives: first, building a comprehensive understanding of the research topic through reviewing literature related to the nature of the construction industry, waste in construction, sustainability, the design phase and Value Management; second, presenting and analysing two case studies to validate the role of Value Management towards reducing waste in construction projects; third, conducting …

Sustainable Architecture Design: Environmental And Economic Benefits, Michael Babcock

Senior Honors Theses

This thesis examines the movement of environmentalism, and its impact on architecture and construction. During an interview with a professional architect, a basis for research of sustainable design was devised, when he explained that “good” architecture attempts to holistically integrate the external and built environment. Presently, the main measurement for sustainability is energy efficiency. Therefore, architects constantly implement new technology in an attempt to unify both the external and built environment in an energy efficient manner. Furthermore, this thesis provides an environmental and financial cost analysis of implementing sustainable design and build. Research shows that the life cycle and up-front …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Syllabus: Solar Energy Systems And Building Design, Ho-Sung Kim

Sustainability Education Resources

This course introduces the fundamental concepts of solar building design and energy systems. Through project based study and possible field visits, students will explore the theory, technologies, applications, and benefits of solar design of buildings and discover how to utilize solar energy systems for residential and commercial buildings. Students will be required to research and document technology and complete a semester case study project in which they will examine various energy conservation aspects and economics underlying solar energy systems.

Umass Amherst Green Building Guidelines 2013, Ludmilla Pavlova-Gillham, Ted Mendoza, Ezra Small, Patricia O'Flaherty, Nariman Mostafavi, Mohamed Farzinmoghadam, Somayeh Tabatabaee Pozveh

Campus Planning Reports and Plans

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Green Building Guidelines provide a framework for approaching new construction and major renovation projects at UMass Amherst that are undergoing LEED certification by focusing the conversation on green building aspects that are most important to the campus. They are intended to be the beginning of a dynamic conversation between designers, environmental consultants and constructors, university stakeholders, and users of new high performance buildings.

Variability Analysis Of Undrained Shear Strength For Reliability-Based Design, Site Onyejekwe, Xin Kang, Louis Ge, Richard Wesley Stephenson

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Description of the Spatial Variation of Compositional and Mechanical Soil Parameters is Often Paramount in Site Characterization of Geotechnical Design and Analysis. the Values of the Parameters Themselves Largely Depend on In-Situ State Factors Which Are Related to Spatial Locations. Also, for Large-Scale Engineering Projects Such as Earth Dams or Highways, It is Generally Expected that Heterogeneous Site Characteristics Will Be Revealed by Investigations at Spatially Distant Locations. Currently, Most Reliability-Based Design Methods Are based on the Second-Moment Statistics (Mean and Variance). However, They Are Unable to Adequately Describe the Spatial Variation of Soil Properties. in This Paper, Spatial Correlation …

Design Collaboration As A Tool For Developing Diversity In The Work Place, Rees E. E. Shad

Publications and Research

Without a doubt the modern workplace is one made up of numerous working professionals graced with an array of varied abilities who work in tandem to meet a common goal. In this article the author recounts his personal journey to embracing the collaborative process and how he has honed and developed the skill set into an important element of design curriculum in order to prepare students for this fundamental market paradigm.