Architecture Commons^™

Daylighting Analysis Of Neuberger Hall, Heather Larose, Rachel Sairio, Conner Scher, Hacker Architects

Research-Based Design Initiative

With the renovation of Neuberger Hall. one of the most highly used academic buildings on the PSU campus. it is crucial to balance the need for maximizing daylighting potential with the long term costs. With various design elements being considered it is necessary to understand the existing daylighting conditions to better enable us to provide effective and efficient design recommendations. Daylighting design plays a critical role in the quality of the learning and working spaces provided at Neuberger. as well as the effect on student comfort and productivity.

Neuberger Hall Portland State Univesity, Portland State University. School Of Architecture

Research-Based Design Initiative

CONCRETE’S CARBON FOOTPRINT:

90% of concrete mix emits a relatively small amount of CO2 into the atmosphere. The other 10%, cement, accounts for the vast majority of concrete’s embodied CO2. Concrete’s embodied CO2 is roughly equivalent to 9% of it’s weight Roughly 40% of the CO2 emitted from calcination will be reabsorbed through carbonation of concrete surfaces over a 100-year life cycle.

Daylight & Glare, Sergio Palleroni, David Posada, Tucker Jones, Alyssa Brook, Jennifer Moran, Chad Wallace, Bora Architects

Research-Based Design Initiative

We conducted a daylighting and glare study for Bora Architects within their Portland business office space. The project was to examine the quality of daylight, consider the effectiveness of borrowed light, and strive to discover what LEED-compliant daylight autonomy really looks like. In addition we were tasked with running computer simulations to measure excess glare and look for ways to combat its effect. We were able to explore the effects of glare with in Bora’s workspace as it currently exists and look for interventions to improve perceived lighting level contrasts. The control of glare and daylighting can be an effective …

Clt Parking Garage Tally Analysis, Ashwaq Al Khalil, Janna Ferguson, Austin Zeitz, Nicholas Papaefthimiou, Corey T. Griffin, Tucker Jones, Srg Partnership

Research-Based Design Initiative

The goal of this research project is divided into three components. First, utilize Tally to calculate the embodied energy and carbon of the CLT structural system of the Glenwood Parking Garage. Second, the embodied energy and carbon values will be compared against values found in a previous study for different structural systems in parking garages (pre-cast concrete, cellular steel, post-tensioned concrete). Finally, the subsequent dataset and process entailed in its generation will provide the basis for an evaluation of Tally as a tool for life cycle assessment as part of the design process. The assessment was completed using the established …

Knight Cancer Research Center, Alesha Evans, Zach Pate, Srg Architects, Catena, Brightworks

Research-Based Design Initiative

The Knight Cancer Research Building is a continuation of the OHSU campus located on the South Waterfront off Moody Avenue. On the course to LEED Platinum certification, KCRB is pursuing a LEED 4 pilot point that focuses on the influence early design decisions have on the longterm environmental impact of a new building project. Collaborating with team members from SRG, Brightworks Sustainability Consulting, and Catena Structural Engineers, we used Athena software to evaluate the building Life Cycle reduction impact with regard to the use of steel and concrete within the building’s structural system. As a starting point, we considered at …

Wind Analysis Of 11th & Washington Tower, Ashwaq Al Khalil, Meijia Qi, Zgf Architecture

Research-Based Design Initiative

PROJECT OVERVIEW:

This research focus on how wind impacts on 11W by ZGF architects. Located on SW 12th Ave and 11th Ave to the Washington in the SW side of the river, south of Burnside on downtown Portland, OR. The aim of the study is to find how wind can impact the balconies, 2nd level roof deck, 8th level roof deck, and 26th floor roof deck. The tests were conducted with Sketch up and Autodesk Flow Design analysis tool. In the beginning, we analyzed a cube as a baseline and studied the impact cuts in the building form had in …

Biosafety Cabinets In Laboratory Planning, Carrington Crities, Amy Peterson, Nicholas Papaefthimiou, Tucker Jones, Zgf Architects

Research-Based Design Initiative

The purpose of this research and white paper is to design architectural module layouts for practical laboratory use by integrating biosafety cabinets (BSCs) in replacement of traditional fume hood ducting systems and discuss the findings. The desired outcome of this work is to use knowledge gained from research to propose potential BSC layouts within a laboratory type building, and how BSCs can benefit laboratory design. Based on advantages and restrictions between each BSC class, BSCs are strategically placed in appropriate locations throughout the structure. The results show that implementing BSCs reduces the floor-to-floor height and allows for more flexible module …

Exploring Building Energy Use Modeling, Alyssa Brook, Kathleen Mitchell, Zgf Architecture

Research-Based Design Initiative

OBJECTIVE: The project objective was to analyze and test building energy use modeling software programs to find a quick and easy to use tool that can be implemented in the early stages of design. A list of programs was developed and narrowed down based on criteria important to architects in early design stages. Programs were tested and rated using a weighted criteria formula. Recommendations for capabilities and user interface of future energy modeling programs were made. This research is aimed at creating a methodology that makes it easier to analyze new energy modeling tools as they are developed in the …

Daylight Analysis: Analayzing Daylight Autonomy In The Early Phases Of Design On An Adaptive Reuse Project, Lauren Sanchez, Nick Vipond, Nicholas Papaefthimiou, Mike Manzi, Josh Brandt, Sarah Weber, Jacob Peel, Bora Architects

Research-Based Design Initiative

This research investigates methods for increasing the area of daylight autonomy in an adaptive reuse project with deep floorplates. The research employs DIVA simulation tool to assess daylight performance the early phases of design, quantified as Daylight Autonomy (DA), Spatial Daylight Autonomy (sDA) and Annual Sunlight Exposure (ASE). Findings from DIVA analysis reveal that light shelves decrease daylight autonomy but help to reduce glare.

Effective daylight design is critical in adapting a historic building with deep floorplates for office use. Activity-appropriate levels of daylight transmission can offset electrical lighting loads, provide comfortable conditions for occupants, and connect building occupants with …

Source To Site: Unitarian Universalist Fellowship Of Central Oregon Material Analysis, Portland State University. School Of Architecture

Research-Based Design Initiative

The object of this research was to conduct a material analysis of the Unitarian Universalist Fellowship of Central Oregon Church in Bend, Oregon designed by Hacker Architects (Portland, Oregon). This research produced an infographic narrative depicting the place of origin of the raw form of the primary building materials used in the church: wood, steel, stone, and concrete. An investigation of the project specifications and the material submittals developed the basis for this graphic narrative. The providers, contacted by the research students, gave insight into the initial sourcing location of the raw form of the material. This research examined a …

Barriers To Mass Timber Adoption Mid To High-Rise Buildings, Bianca Viggiano, Chad Wallace, Corey T. Griffin

Research-Based Design Initiative

Advancements in technology and manufacturing have provided the means to construct tal l wood buildings that are safe and cost effective while gaining the aesthetic and environmental benefits associated with mass timber. The objective of this research is to identify perceived barriers of the integration of mass timber as a desirable bui lding material for architects and structural engineers. Building on a previous study, surveys wi ll be distributed to professionals in the building science field to detect information gaps pertain ing to wood as a viable alternative to concrete in mid to high - rise applications.

Pcc Rock Creek Post Occupancy Evaluations, Ossie Pleasant, Ryan Ngo, Opsis Architecture

Research-Based Design Initiative

The objective of this research is to determine whether the new additions to Building 5 and Building 7 of Portland Community College at Rock Creek Campus fulfill the requirements for the LEED IEQ 7.2: Thermal Comfort-Verification credit for LEEDv2009.

Occupants of the new additions will take an anonymous survey regarding their thermal comfort and other aspects of the new additions via SurveyMonkey.

If the survey results indicate that more than 20% of occupants are dissatisfied with thermal comfort in the building, a plan for corrective action must be developed to fulfill the requirements of the credit. The results from SurveyMonkey …

Daylighting Analysis: Yost Grube Hall, L. Patterson, C. Hardman

Research-Based Design Initiative

The goal of this research is to produce a daylight and energy analysis of the Yost Grube Hall Ankeny ‘Net Zero’ Multi-Family Housing project.The examination of current daylight levels provides information on what is gained or lost in regards to daylighting and net-zero goals. A focus on the progression of the surrounding neighbourhood development will guide the different daylight studies. This combined with the other strategies employed by YGH in their design efforts forms a narrative about the realities of ‘Net-Zero’ architecture and the various routes to success.

Unitized Wall Systems, Ossie Pleasant, Lauren Sanchez, Nick Vipond, Sergio Palleroni, David Posada, Tucker Jones, Zgf Architects

Research-Based Design Initiative

ZGF is working on multiple large towers with short timelines that would benefit from quicker construction, which led us to unitized wall panels from a series of manufacturers. What often makes the construction process difficult is that there are independent organizations with differing priorities that must work together toward a common goal. By decreasing the number of trades, and minimizing construction time, a prefab system might allow earlier occupancy to regain building costs. With direction from discussions with the ZGF team, our efforts were initially focused on the comparison of three specific unitized wall systems: Island Exteriors, Sotawall and Enclos. …

Extending The Season For The New White Salmon Pool, Chris Jones, Matt Stockstill, Yost Grube Hall Architecture

Research-Based Design Initiative

The city of White Salmon will be home to a new outdoor, public pool in the coming years in hope that the community's identity and participation can continue to grow. While the design in nearly complete, a new challenge has been set to investigate ways in which this new aquatic facility can host an extended season via a temporary enclosing structure. During the past few months, the White Salmon team has been investigating various options for enclosing systems and researching how, if at all, an extended season is possible using Sefaira simulation software and energy performance data.

Goldilocks Device Design, Mitchell Davis, John Williamson, Srg Architects

Research-Based Design Initiative

As the use of sustainability techniques in architecture increase more and more firms in the world have started to dive into the possibilities of how to create passive and net zero buildings, but in this exploration or techniques such as materials, solar shading, passive cooling there has been little thought into testing how well these techniques are actually working to improve the habitat and livability for the humans using these spaces. Although many buildings use meters to test the performance of a building for post occupancy there is little in the means of testing the human factor in these buildings …