Architecture Commons^™

A Review Of Current Construction Guidelines To Inform The Design Of Rammed Earth Houses In Seismically Active Zones, David Thompson, Charles Augarde, Juan Pablo Osorio

Articles

Sustainability in the materials we use for construction is a prime concern, focusing on reducing the embodied energy and carbon footprints of the materials used. The cement used in concrete products is responsible for a significant proportion of Man's CO2 emissions and its production requires substantial energy input, as do fired clay products. For this reason, products formed from unfired earthen materials are of increasing interest and the current challenges include devising means of robust design for strength and to address durability concerns. One form of earthen construction that employs an in-situ method is rammed earth, and it is a …

Using Blended Learning To Enhance The Experience Of Students In Built Environment Related Degree Programs, Philip Russell, Ruairi Hayden

Articles

Blended learning was introduced into the Construction Management programme in the School of Surveying and Construction Management at the Technological University Dublin in 2016. The module has traditionally been delivered by face-to-face teaching but online delivery has been facilitated using the Virtual Learning Environment (Blackboard) which has enabled a more blended approach to academic instruction. This innovative change to module provision has also provided an opportunity to enhance the student learning experience within the School through a more flexible teaching and learning environment. In this paper, the design, development and implementation of blended learning into a Construction Technology module is …

Embedding Life Cycle Costing In 5d Bim, Dermot Kehily, Jason Underwood,

Articles

Life Cycle Costing (LCC) is the consideration of all ‘relevant’ costs and revenues associated with the acquisition and ownership of an asset. LCC has a number of relevant applications, these include project appraisal; facilities management; procurement and tendering and as a means to evaluate sustainable construction. Although these advantages are well recognised, the process is underutilised due to a number of documented barriers to adoption. Notably these include lack of accurate historical databases; the perceived complexity and time consuming nature of the calculations; lack of a standard LCC methodology, and that clients are not requesting LCC. The research presented is …

Irish Bim Study 2017, Barry Mcauley, Alan Hore, Roger West

Articles

The Construction IT Alliance (CitA) recently published its Global BIM Study as part of its BIM Innovation Capability Programme (BICP). The study sought to identify how BIM was being currently addressed in 27 countries across the globe. The study sought to identify the presence of three key ingredients in these countries:

1. Regulatory requirement for BIM

2. Champions driving BIM

3. Noteworthy publications

The report identified a number of recurring themes that would help to shape Ireland’s BIM programme. The report concluded that Ireland should adopt a programme of partnership between industry and the Irish Government in order to affect …

Compact Facility For Testing Steady And Transient Thermal Performance Of Building Walls, Aimee Byrne, Gerard Byrne, Anthony Robinson

Articles

Energy efficiency retrofit of buildings represents a key effort in reducing EU energy demand by 20% by 2020. However, predictions tend to overestimate savings by large percentages. The shortfall in savings can be attributed to incorrect predictive techniques, comfort takeback along with other behavioural and workmanship variables. Common predictive techniques related to heat loss tend to be based on the U-value of the building envelope. This paper presents the design of a more straightforward and compact version of the traditional Hot-Box apparatus (measures U-value) which instead determines the thermal resistance of samples of building envelope. U-value includes the need to …

International Construction Measurement Standards (Icms) Explained, Charles Mitchell

Articles

In 2015 the United Nations wrote to various construction cost bodies around the world seeking some form of uniformity in the reporting of construction costs worldwide. The UN concern was the variance of reported statistics globally for similar projects even when local economic factors were taken into account.

As a result a meeting was held for interested parties in the offices of the International Monetary Fund (IMF) in Washington D.C. in May 2015. This meeting became the inaugural meeting of what, today, is known as the International Construction Measurement Standards (ICMS) Coalition. The membership of the coalition is open to …

The Statistical Relevance And Effect Of Assuming Pessimistic Default Overall Thermal Transmittance Coefficients On Dwelling Energy Performance Certification Quality In Ireland, Ciara Ahern, Brian Norton, Bernard Enright

Articles

In the EU, Energy Performance Certificates (EPCs) are issued for dwellings whenever they are constructed, sold or leased. Where requiring data would be prohibitively costly, nationally applicable default-values for the thermal transmittance coefficients of the building envelope are employed. Use of such worst case default U-values ensure that a poor dwelling does not attain a better energy rating than is merited. In the absence of empirical data in Ireland thermal-default U-values, as in many other EU member states, are determined by the type and date of construction and then prevailing building codes. Using 463,582 dwellings representing 32% of the total …

Bim Collaboration In Student Architectural Technologist Learning, Malachy Mathews

Articles

This paper is the result of a qualitative case study which investigated the influence of building information modelling (BIM) collaboration on the learning of student architectural technologists based around a studio group project. The purpose of the paper is to disseminate knowledge gained into a new learning environment facilitated by the collaborative properties of a BIM application. A qualitative case study approach has been used to undertake the examination of the learners’ experiences during the project. This approach allowed the author to map the complex interaction between the participants during the stages of the collaborative design project. The paper provides …

Building Fabric Design : Thermal Performance Standards, Joseph Little

Articles

This is the first of a series of articles using content from the new RIAI Building Fabric Design CPD which explores a range of themes of central importance to designing buildings that are highly energy efficient, genuinely compliant and perform to their design intent and specification. As the articles are short and the themes are often complex, they can be at best a short introduction to the issues raised. In this article we will look at the new minimum building fabric standards: these are far more onerous than much of the Industry understands.

2:1 The Paper Tube Project, Noel Brady

Articles

Review of applied technological solution to rapid building techniques using paper tube and analogous materials to create space enclosing geodesic systems.

Stochastic Hybrid Embodied Co2-Eq Analysis: An Application To The Irish Apartment Building Sector, Adolf Acquaye, Aidan Duffy, Biswajit Basu

Articles

Although embodiedCO2-eq analysis has seen recent developments as evident in the establishment of the ISO14040 and 14044 LCA standards, it is recognized that due to weaknesses in gathering data on product-related emissions,embodiedCO2-eq values are probabilistic. This paper presents a stochastic analysis of hybrid embodied CO2-eq in buildings to account for this weakness in traditional methods and, by way of example, applies it to an Irish construction-sector case study. Using seven apartment buildings, 70,000 results are simulated with Monte Carlo analysis and used to derive probabilistic and cumulative embodied CO2-eq intensity distributions for apartment buildings in Ireland. A Wakeby distribution with …

Thermal Bridging - Understanding Its Critical Role In Energy Efficiency, Joseph Little, Beñat Arregi

Articles

Plane element heat loss[1] and thermal bridging[2] together constitute all the conduction heat loss (measured in W/K, watts per kelvin) through the thermal envelope[3] of a building. Perversely insulating the plane elements more and more without carefully dealing with junctions can lead to a significant increase in thermal bridging heat loss. This is often more significant in poorly thought-out energy-focused retrofits than in existing or new buildings.

Top Tips For Domestic Refurbishment, Joseph Little

Articles

1) It stands to reason that insulating a wall should not affect its strength or longevity, nor should it result in a buildup of moisture (inter-stitial condensation) or mould. However the Industry is currently gripped with a desire to insulate to the highest standard (U-value) at the lowest financial cost, as quickly as possible, with little thought of these issues. An appropriate, robust solution must take the original wall, the occupant’s health, the room’s function and even the building’s location into account.

Breaking The Mould 5 : Comparative Simulation Of Internal Insulation Systems, Joseph Little

Articles

In the last edition of Construct Ireland ‘Breaking the Mould IV’ established the standard that should be used to evaluate thermal upgrades of single leaf walls, described steps to physically prepare the wall, explained some of the mechanisms that affect the likelihood of mould and gave criteria for judging the simulations outputs. The next step is to simulate a number of permutations of typical internal insulation systems using WUFI Pro under IS EN 15026.

Breaking The Mould 3, Joseph Little

Articles

This article is the third in a series looking at thermal upgrades to single-leaf walls of existing houses. The theme for this article was intended to be an analysis of various drylining options for brick and rubble-built walls of older properties. That will follow. The following events forced a change in focus.

Breaking The Mould 2 : An Analysis Of Single-Leaf Insulation Upgrades, Joseph Little

Articles

This article is the second in a series looking at thermal upgrades to single-leaf walls of existing houses. It compares a range of ways of upgrading masonry single-leaf walls, particularly the ubiquitous hollow block wall, and the impact of those decisions on moisture content, wind- and airtightness, cost and heating. Future articles will look at various drylining approaches for a range of walls including brick walls of various widths.

Breaking The Mould 1 : A Study Of Condensation In Single-Leaf Concrete Wall Upgrades, Joseph Little

Articles

This article is the first of a series looking at upgrade options and issues associated with single-leaf walls of existing houses. This article will focus on insulated drylined concrete block walls of the ubiquitous housing estate house. This will include the findings of software that dynamically models moisture movement through the wall over several years. The article following this will look at a range of options for replacing existing drylining or installing drylining where it never was before, be that for a solid block wall of a 1950s house or a solid brick wall of an 1850s house.

In Transit - Transition Movement Inspires Dramatic Carbon Cuts In House Refurb, Joseph Little

Articles

Drawing on the ‘Energy Descent Action Plan’ he developed at Kinsale, Rob Hopkins and his team launched Transition Town Totnes (in the UK) one and a half years ago. 64 recognised transition communities and 600 other groups (and counting) are now in communication with Rob’s team to launch their versions of this initiative in their communities worldwide.¹ The Transition Ireland Network is coordinated by Davie Philip of Cultivate and several transition initiatives are underway here.

Frame It - Thoughts On Education, Reducing Carbon And Vapour, Joseph Little, Robbie Cousins

Articles

Joseph Little believes timber frame can be the backbone of a new generation of low-carbon, energy-efficient housing, and be used as an intelligent response to Climate Change and fuel prices. But he tells Robbie Cousins that timber frame manufacturers, suppliers and architects need to gear-up and work more closely together if the true potential of this vision is to be realised.

Joseph Little’s chief bugbear is poor construction standards & details on site and the core of this issue is how the knowledge set of architects and builders and how standards are controlled. The seeds of this idea may have …

Baugruppe - Lessons From Freiburg On Cooperative Housing : Lessons From Freiburg On Cooperative Housing, Joseph Little

Articles

Creating Sustainable Communities in the UK and Ireland

The Genesis of Quartier Vauban

Improving Access To Housing For People With Disabilities., Myles Keaveney

Articles

No abstract provided.

Access To Buildings For People With Disabilities, Myles Keaveney

Articles

No abstract provided.