Architecture Commons^™

Integrated Assessment Of Shallow-Aquifer Vulnerability To Multiple Contaminants And Drinking-Water Exposure Pathways In Holliston, Massachusetts, Birgit Claus Henn, Yelena Ogneva-Himmelberger, Allegra Denehy, Marcie Randall, Nichole Cordon, Bilin Basu, Brian Caccavale, Stefanie Covino, Ravi Hanumantha, Kevin Longo, Ariel Maiorano, Spring Pillsbury, Gabrielle Rigutto, Kelsey Shields, Marianne Sarkis, Timothy Downs

Sustainability and Social Justice

Half of U.S. drinking water comes from aquifers, and very shallow ones (table) are especially vulnerable to anthropogenic contamination. We present the case of Holliston, a Boston, Massachusetts suburb that draws its drinking water from very shallow aquifers, and where metals and solvents have been reported in groundwater. Community concerns focus on water discolored by naturally occurring manganese (Mn), despite reports stating regulatory aesthetic compliance. Epidemiologic studies suggest Mn is a potentially toxic element (PTE) for children exposed by the drinking-water pathway at levels near the regulatory aesthetic level. We designed an integrated, community-based project: five sites were profiled for …

Garden Building Design Project, Gena Farley, Vanessa Villanueva, Jayanne Asuncion

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Staysha Delgado, Lillian Sam, Ryan Teixeira, Courtney Vierra

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Joseph Cliscagne, Joseph Prescott, Tamara Turton, Saima Uz-Zaman

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Case Study: Mitigating Schedule Impacts From Oshpd Regulations On Medical Equipment, Peter K. Lee

Construction Management

The vast majority of healthcare construction projects in the state of California work with OSHPD—Office of Statewide Health Planning and Development—to meet California’s Hospital Seismic Safety Law. While meeting the state’s Hospital Seismic Safety Law is important and even critical, working with OSHPD’s stringent regulations does imply additional concerns to be addressed by the project team. One concern regards the approval of bigger medical equipment and its impact on the overall construction schedule. This paper examines the factors that contribute to delays in the construction schedule, responsible parties for the delay, and responsibilities of each involved party. Based on an …

Ireland’S Bim Macro Adoption Study: Establishing Ireland’S Bim Maturity, Barry Mcauley, Alan Hore, Roger West, Mohamad Kassem, Shiyao Kuang

Conference papers

Since 2016 the BIM Innovation Capability Programme (BICP) has captured the capability of the Irish Construction Industry’s and the Higher Education Institutes’ (HEIs) response to the increased requirement for BIM on Irish construction and engineering projects. One of the primary responsibilities of the BICP research team is to collate data to assist the National BIM Council of Ireland in the formulation of a National BIM Roadmap. To assist the Council with this task the BICP research team applied five macro BIM maturity conceptual models to assess Ireland’s BIM maturity. The results from the models were further utilised to develop a …

Stewardship Of International Bim Programmes: Lessons For Ireland, Barry Mcauley, Alan Hore, Roger West, Shiyao Kuang

Conference papers

The support by central government of national Building Information Modelling (BIM) programmes is common throughout the developed world today. To further understand how the different international governments have supported their BIM programmes the BIM Innovation Capability Programme (BICP) research team in Ireland recently completed a comprehensive Global BIM Study to help inform the National BIM Council (NBC) of Ireland in developing a Roadmap to Digital Transition for Ireland’s Construction Sector. This paper details the findings of a more concentrated investigation on a selection of jurisdictions on how particular international BIM programmes are orgainsed, managed and the level of governmental support …

What Lessons Can Be Learned From The Delivery Of The First Building On The Grangegorman Campus Using Building Information Management (Bim)?, Pat O'Sullivan, Avril Behan

Conference papers

There is an acceptance that BIM, via data management, can be integrated with FM to reduce costs during the Operations and Maintenance stage of a project. However, what has not been documented is the ‘on the ground’ reality which can be reviewed as a lessons learnt exercise to improve the implementation of BIM FM for future projects. This case study sets out to explore the realities of a client’s adoption of BIM based upon the actual experience of the Greenway Hub. Rather than relying on anecdotal evidence the research was based upon the real practices and experiences of the Dublin …

Establishing The Key Pillars Of Innovation Required To Execute A Successful Bim Strategy Within A Construction Sme In Ireland, Barry Mcauley, Patrick Carroll

Conference papers

The recent resurgence of the Irish Construction Industry comes at a time of global transition towards an information revolution, with technology now playing a vital role within our post-recessionary society. BIM is now seen as a core technology at the forefront of this transformational change which can present Construction SMEs with opportunities to new financial ventures. If any SME organisation is to be successful with BIM adoption then innovation must be the starting point. The aim of this paper is to establish the enabling factors required for innovating a BIM strategy within a SME Construction Organisation. The methodology involved a …

Bs News November/December

Building Services Engineering

No abstract provided.

The Bridge Newsletter Winter 2017, Missouri University Of Science And Technology

The Bridge Newsletter

-Hands-on experience in concrete materials research and construction practices
-Making ACML progress
-Taos bridge project

Understanding Sanitation Preferences: An Exploratory Study In The Sirohi District Of Rajasthan, Karen Mac

Independent Study Project (ISP) Collection

Of all the countries in the world, India has the highest number of people practicing open defecation, causing adverse health outcomes from the unconfined spread of faecal matter. The Government of India is ambitiously aiming to end this practice through the construction of 12 million toilets by 2019, but historically, many toilets across India have gone unused. This study focused on understanding: (1) the reasons why people continue to openly defecate despite having toilets and (2) the requirements of a toilet that rural households would be willing to use. Along with 36 observations of household toilets, semi-structured group (n=8) and …

Measuring Rheological Properties Of Cement Pastes: Most Common Techniques, Procedures And Challenges, Dimitri Feys, Rolands Cepuritis, Stefan Jacobsen, Karel Lesage, Egor Secrieru, Ammar Yahia

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Science of Rheology is Increasingly Used to Describe the Properties of Fresh Cement Paste. Compared to Standard Workability Tests, Rheological Properties Allow for More Fundamental Investigation, More Precise Phenomenological Description of Flow Properties and Serve as Input for Numerical Simulations. Standard Commercially Available Rheometers Are Typically Used to Perform Those Measurements. However, the Results of the Measurement Depend on the Geometry, Testing Procedure and a Number of Potential Artefacts. This Technical Letter Describes the Most Common Techniques and Procedures Used to Assess the Rheological Properties of Cement Paste, as Well as Challenges during Measurements and Actions to Counter These …

Design And Planned Obsolescence. Theories And Approaches For Designing Enabling Technologies, Matteo Zallio, Damon Berry

Articles

We are currently living in a decade where smart objects and Internet of Things (IoT)-based devices are becoming part of daily life in different contexts. This research seeks to investigate and verify, by using a formal literature review methodology, the most visible aspects of technological development, within the Industry 4.0 and IoT scenario, in relation to the theories of the so called “Planned Obsolescence”.

This study covers a defined number of works on Design theories and practices on how to face the issue of built-in obsolescence of devices in the era of the Connected Devices. The majority of the works …

Bs News September/October

Building Services Engineering

No abstract provided.

Bim+Blockchain: A Solution To The Trust Problem In Collaboration?, Malachy Mathews, Dan Robles, Brian Bowe

Conference papers

This paper provides an overview of historic and current organizational limitations emerging in the Architecture, Engineering, Construction, Building Owner / Operations (AECOO) Industry. It then provides an overview of new technologies that attempt to mitigate these limitations. However, these technologies, taken together, appear to be converging and creating entirely new organizational structures in the AEC industries. This may be characterized by the emergence of what is called the Network Effect and it’s related calculus. This paper culminates with an introduction to Blockchain Technology (BT) and it’s integration with the emergence of groundbreaking technologies such as Internet of Things (IoT), Artificial …

Impacts Of Rail Transit Investments On Demographics And Land Use: 1990-2010, Aubrey Trinidad

All Theses

This paper studies the changes in land use and population characteristics around station areas following the building of rail transit stations in 14 major cities in the United States from 1990 to 2010. It answers the question: how have investments in US rail transit made since the 1990s affected land use and demographics? It also looks at the specific effects of investments on population density, race, and ethnicity, means of transportation, median housing value, median household income, vehicle access share, occupations, and land use represented by the share of multifamily versus single-family housing. Using block group level US census data …

Bim Innovation Capability Programme Of Ireland, Barry Mcauley, Alan Hore, Roger West

Conference papers

The Irish Government has requested that Enterprise Ireland, an organisation responsible for the development and growth of Irish enterprises in world markets to actively promote the use of BIM in Ireland. This promotion has taken the form of an opportunity for Enterprise Ireland clients to apply for a grant under their BIM Enable and BIM Implementation schemes and also through their funding of the BIM Innovation Capability Programme (BICP) of Ireland. The BICP is a two-year project (2016-2018) which seeks to capture the capability of the Irish Construction Industry and the Higher Education Institutes to respond to the increased requirement …

Bs News July/August

Building Services Engineering

No abstract provided.

The Prevalence Of Six Sigma Trends In The Construction Industry In Pakistan, Muhammad M. Hassan

Masters Theses & Specialist Projects

Economic development in any country or area depends heavily on the performance of the construction industry. This is because the subsequent development of infrastructure increases economic activity, living standards, direct foreign investments, and business opportunities. The construction industry in Pakistan also plays a significant role in its economic activity, and the government’s focus towards increasing infrastructure development provides the construction industry with growth prospects. It is observed that quality management practices in the Pakistan construction industry are highly inadequate to enhance quality. The construction industry there is highly challenged with inadequate delays in projects and project quality. The need for …

Implementing Subspace Identification On Shake Table Model, Zoe T. Cooperband

Architectural Engineering

Stochastic Subspace Identification is a field of applied mathematics that takes collected experimental time-history data and gives out information about the system that produced the data. SSI is typically used in control analysis but here we apply the methods to the modal analysis of structures. This senior project didn’t involve theory - instead much of the work was in research behind how Subspace Identification works, implementing the algorithm in MATLAB, and applying the program to shake table data to validate the program. In other words, building the framework to make SSI a usable tool and practical learning experience for other …

Shrinkage Cracking In Concrete Tilt-Up Construction, Stewart Hooks, Jack Robinson

Architectural Engineering

The purpose of this project is to investigate a particular, undesirable cracking pattern in concrete tilt-up panels that, until now, did not have a known definite cause. The cause of this cracking pattern is hypothesized to be due to shrinkage restraint of the concrete panels. The cracking under investigation occurs at the bottom corners of the Tilt-Up panels, suggesting that the base of the panel is restrained from shrinkage. This project models various components of Tilt-Up Construction that have potential for restraining the panels from shrinking. This project consists of the following main components.

The first aspect of this project …

Implementing Net Zero Energy Into The Construction Innovations Center, Marlo Arleen Castro

Construction Management

As the environmental status of our planet declines, it is becoming more and more important for the construction industry to adapt. Leadership in Energy and Environmental Design (LEED) is becoming an unspoken requirement for all new and tenant improvement construction, and now, with the goal of Net Zero Energy (NZE) for all new commercial buildings by 2030, NZE is becoming the way of the future. As of late, California Polytechnic State University in San Luis Obispo (Cal Poly) has made grand efforts to retrofit several of the older buildings on its campus in order to achieve LEED certification. One of …

Modular House Revival, Kevin Chiang, Spencer Dilley, Sarah Dowthwaite, Trevor Houghton, Ryan Lefebvre, Michele Leung, Cameron Lober, Chris Martinez, Katie Mayer

Architectural Engineering

The Modular House, located in Poly Canyon, has seen extensive damage since the last caretaker left nearly ten years ago. To prevent further damage and improve the safety and appeal of the structure, we are proposing a renovation of the existing building that removes the existing cladding and partitions. By the end of Spring Quarter 2017, the Modular House will have a guardrail system replacing the wood paneling on the walls and a new steel composite deck to replace the current flooring system. The structural steel framing system will remain as is.

Bs News May/June

Building Services Engineering

No abstract provided.

Irish Bim Study 2017, Barry Mcauley, Alan Hore, Roger West

Articles

The Construction IT Alliance (CitA) recently published its Global BIM Study as part of its BIM Innovation Capability Programme (BICP). The study sought to identify how BIM was being currently addressed in 27 countries across the globe. The study sought to identify the presence of three key ingredients in these countries:

1. Regulatory requirement for BIM

2. Champions driving BIM

3. Noteworthy publications

The report identified a number of recurring themes that would help to shape Ireland’s BIM programme. The report concluded that Ireland should adopt a programme of partnership between industry and the Irish Government in order to affect …

Bs News March/April

Building Services Engineering

No abstract provided.

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …

The Bridge Newsletter Spring 2017, Missouri University Of Science And Technology

The Bridge Newsletter

-Bayless retires
-Lifesaving flood relief
-Asphalt expert joins S&T
-First Prakash Lecture

2017 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.