Architecture Commons^™

Tron 2.0 - The Experience, Alecsandro G. Vitale, Alexander W. Billings, Jordan Delfino, William Beechinor, Kelly Rorden

Architectural Engineering

The goal of this senior project was to come up with a structural-engineering-related schematic design for a roller coaster to be installed in Disneyland called TRON 2.0: The Experience. This involved looking at both design processes that we had already learned through our curriculum as well as researching concepts that were previously foreign to us, namely the dynamic application of loads and the effects of fatigue stresses.

A story was established based on the source material: the TRON movies produced by Walt Disney Studios. Thematic elements from the story were used as the basis for design implications that would become …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Technological University Dublin since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" and …

Umass Amherst Green Building Guidelines 2013, Ludmilla Pavlova-Gillham, Ted Mendoza, Ezra Small, Patricia O'Flaherty, Nariman Mostafavi, Mohamed Farzinmoghadam, Somayeh Tabatabaee Pozveh

Ludmilla D Pavlova

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Green Building Guidelines provide a framework for approaching new construction and major renovation projects at UMass Amherst that are undergoing LEED certification by focusing the conversation on green building aspects that are most important to the campus. They are intended to be the beginning of a dynamic conversation between designers, environmental consultants and constructors, university stakeholders, and users of new high performance buildings.

Umass Amherst Building Measurement, Verification, Coordination And Template Plan, Nariman Mostafavi, Ted Mendoza, Jeffrey G. Quackenbush, Sandy J. Beauregard, Jason J. Burbank, Mohamad Farzinmoghadam, Ludmilla Pavlova-Gillham, Kylie A. Landrey, Patricia O'Flaherty

Ludmilla D Pavlova

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Building Measurement, Verification, Coordination and Template Plan was begun in 2013 and finalized in 2015 as a resource to project teams that undertake the measurement and verification of building systems during the first year of occupancy of a new building and renovation project, particularly projects undergoing LEED certification.

Umass Amherst Energy Modeling Guidelines, Nariman Mostafavi, Ted Mendoza, Jeffrey G. Quackenbush, Sandy J. Beauregard, Jason J. Burbank, Mohamad Farzinmoghadam, Ludmilla Pavlova-Gillham, Kylie A. Landrey

Ludmilla D Pavlova

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The Campus energy Modeling Guidelines were developed in 2015 as a resource on how to: i) generate energy models for campus buildings; ii) provide quality assurance review of current energy models; and iii) share UMass Amherst energy modeling input parameters with project design teams for them to establish a baseline building energy profile.

University Of Massachusetts Amherst 2012-2021 Capital Improvement Projects, Douglas Vigneau, Juanita Holler, John Mathews, Ludmilla Pavlova-Gillham, Ezra Small

Ludmilla D Pavlova

In 2013 the University of Massachusetts, on behalf of the University of Massachusetts Building Authority and Massachusetts Division of Capital Asset Management and Maintenance (DCAMM), submitted an Expanded Environmental Notification Form for the University's 2012 - 2021 Capital Improvement Plan to the Executive Office of Energy and Environmental Affairs (EOEEA) Massachusetts Environmental Policy Act Office (MEPA). Taken individually, the majority of the Projects, comprising of 13 building/space, 7 site/landscape, and 5 facility/ utility scale improvement projects, do not require MEPA review as most of the Project sites are confined to infill areas on campus that are currently or have been …

Quantification And Subjective Perception Of Varying Reflection Densities In Measured Room Impulsed Responses, Hyun Hong, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This project focuses on quantifying and testing the subjective perception of reflection densities, or the number of reflections per second, from different room impulse responses. The widely used room acoustic metric, reverberation time, is linked to the perceived reverberation in a room. Two different rooms having the same reverberation time, though, can have different reflection densities in their room impulse responses, and this difference in reflection density may affect how listeners perceive spatial impression in rooms. To investigate how sensitive humans are to a change of reflection density, this paper first reviews assorted parameters for quantifying reflection density from measured …

Room Acoustic Effects On Speech Comprehension Of English-As-Second-Language Talkers And Listeners Versus Native-English-Speaking Talkers And Listeners, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Approximately 21% of the children in the United States school system speak a language other than English at home, but are being taught in English at school. English is additionally being used more and more often as a common language in international settings, even though participants at these international events again are not native English speakers. How do adverse room acoustic environments, including higher background noise levels and longer reverberation times, impact English-as-a-Second-Language (ESL) talkers and listeners versus native English-speaking talkers and listeners? This presentation focuses on two recent studies at the University of Nebraska that investigate how assorted room …

Team Solar Sip, Patrick Fillingham, Wesley Goodson, Kenneth Li

Mechanical Engineering

No abstract provided.

Modeling Person-To-Person Contaminant Transport In Enclosed Environments, Chun Chen

Open Access Dissertations

It is essential to predict person-to-person contaminant transport in enclosed environments to improve air distribution design and reduce the infection risk from airborne infectious diseases. This study aims to improve and accelerate the simulation of person-to-person contaminant transport in enclosed environments. ^ This investigation first conducted experimental measurements of person-to-person contaminant transport in an office mockup and the first-class cabin of a functional MD-82 aircraft. The experimental data of steady-state airflow, temperature, and gas contaminant concentration fields obtained in the office were used to validate the steady-state computational fluid dynamics (CFD) models. In the aircraft cabin, the transient particle concentrations …

Net Zero Residential Design For Solar Calpoly, Bryce Reiko Willis

Master's Theses

The Department of Energy (DOE) confirmed Team Solar Cal Poly from California Polytechnic State University, San Luis Obispo, as a competitor in the 2015 Solar Decathlon in February 2014. The Solar Decathlon is a biennial collegiate competition to construct a net-zero home and operate it for a week of “normal use”. Solar Cal Poly needed assistance with passive and active HVAC systems for the design, and thermal load models. The competition will take place in Irvine, CA [33.67⁰, 117.82⁰ W] from September 27 – October 3, 2015. After the completion, a potential final location for the house will be Santa …

Sensible Air To Air Heat Recovery Strategies In A Passive House, Santiago Martin Rodriguez-Anderson

Dissertations and Theses

Due to rising energy costs and concerns about global climate change, high performance buildings are more in demand than ever before. With roughly 20% of the total energy consumption in the United States being devoted to residential use, this sector represents a significant opportunity for future savings. There are many guidelines and standards for reducing building energy consumption. One of the most stringent is the Passive House Standard. The standard requires that that air infiltration is less than or equal to 0.6 air changes per hour at a 50 Pascal pressure difference (ACH 50), annual heating energy is less than …

Umass Amherst Energy Modeling Guidelines, Nariman Mostafavi, Ted Mendoza, Jeffrey G. Quackenbush, Sandy J. Beauregard, Jason J. Burbank, Mohamad Farzinmoghadam, Ludmilla Pavlova-Gillham, Kylie A. Landrey

Campus Planning Reports and Plans

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The Campus energy Modeling Guidelines were developed in 2015 as a resource on how to: i) generate energy models for campus buildings; ii) provide quality assurance review of current energy models; and iii) share UMass Amherst energy modeling input parameters with project design teams for them to establish a baseline building energy profile.

Umass Amherst Building Measurement, Verification, Coordination And Template Plan, Nariman Mostafavi, Ted Mendoza, Jeffrey G. Quackenbush, Sandy J. Beauregard, Jason J. Burbank, Mohamad Farzinmoghadam, Ludmilla Pavlova-Gillham, Kylie A. Landrey, Patricia O'Flaherty

Campus Planning Reports and Plans

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Building Measurement, Verification, Coordination and Template Plan was begun in 2013 and finalized in 2015 as a resource to project teams that undertake the measurement and verification of building systems during the first year of occupancy of a new building and renovation project, particularly projects undergoing LEED certification.

Vibration Of Steel-Framed Floors Supporting Sensitive Equipment In Hospitals, Research Facilities, And Manufacturing Facilities, Di Liu

Theses and Dissertations--Civil Engineering

Floors have traditionally been designed only for strength and deflection serviceability. As technological advances have been made in medical, scientific and micro-electronics manufacturing, many types of equipment have become sensitive to vibration of the supporting floor. Thus, vibration serviceability has become a routinely evaluated limit state for floors supporting sensitive equipment. Equipment vibration tolerance limits are sometimes expressed as waveform peak acceleration, and are more often expressed as narrowband spectral acceleration, or one-third octave spectral velocity.

Current floor vibration prediction methods, such as those found in the American Institute of Steel Construction Design Guide 11, Floor Vibrations Due to Human …