Architecture Commons^™

Numerical And Semi-Analytical Estimation Of Convective Heat Transfer Coefficient For Buildings In An Urban-Like Setting, Anwar Demsis Awol

Electronic Thesis and Dissertation Repository

Urban building arrangements such as packing density, orientation and size are known to influence the microclimate surrounding each building. Studies on the impact of urban microclimatic changes on convective heat transfer coefficient (CHTC) from a stock of buildings, however, have been rare in surveyed literature. The present study focuses on numerical and analytical investigation of CHTC from building-like models with homogeneous set of equal and unequal planar and frontal densities. Consequently, the study discusses the CHTC response in relation to broader changes in the urban surface form. Part of the process involves the development of a simplified one-dimensional semi-analytical CHTC …

Mandela Splash Pad Pre-Construction Plan, Levi Sandbulte

Theses/Capstones/Creative Projects

In the construction industry, it is the responsibility of the general contractor to take the architect’s ideas and turn it into a real building. Many times this requires ample communication and several drafts. This efficient execution of this process is vital to the completion of a successful project. In this project, I practice this communication process. The challenge presented by the owner is to build an affordable splash pad, and without impacting the construction schedule of the Early Childhood Development Center (ECDC) that is being built on the same property at the same time. This proposal gives the owner a …

The Need For A Real Estate Development Capstone Course, Will Robert Kieckhefer

Construction Management

Cal Poly has extremely well-known programs in Construction Management, Business, Engineering, and Architecture. All of these programs have contributed multiple leaders to the building industry every year yet have neglected to integrate the different disciplines that overlap within the industry. The research the author has collected to support the need for a real estate development capstone course included in-person interviews, online research, personal experience, and team surveys. The research concluded the need for a real estate development capstone course that would integrate students from the school of Business, Architecture, and Construction Management. In order to build a successful project, all …

Suitability Assessment For Integrated Urban Development In Makkah City Of Saudi Arabia, Mislat Alotaibi

Graduate Theses and Dissertations

Makkah – the third most populated city in Saudi Arabia with a population of 1,684,408 according to the 2010 demographic survey conducted by the Saudi General Authority for Statistics – is experiencing urban sprawl, which can be defined as an unplanned urban expansion that might degrade the environment and diminish the aesthetic view. This is a persisting problem in Makkah driven by multitude of processes involving the random expansion in its undeveloped land and the removal of its historic mountains surrounding Al-Masjid Al-Haram (the Holy Mosque) in an attempt to push the city limit of urban capacity within its administrative …

Interdisciplinary Studio Pavilion [Isp] 2019, Alex Beaubien

Construction Management

The Interdisciplinary Studio Pavilion 2019 was designed for students within architecture, architectural engineering, and construction management to be placed into eight interdisciplinary teams and design a pavilion that reflected the narrative for the Wine History Project of San Luis Obispo (the “WHP). Its curricula emphasized aesthetics; fabrication methods and techniques; ease of assembly, reassembly and transportability; and function. Deliverables for each team's structure focused on these curricula that required numerous design refinements and construction feasibility studies. This required each team member to contribute their respective knowledge about architecture, structural engineering, and construction to create a pavilion that fulfilled WHP’s goals. …

Interdisciplinary Studio Pavilion [Isp] 2019, Gannon Van Sickle

Construction Management

An Interdisciplinary studio involves different knowledge disciplines who work together to achieve a common goal. This project engages this idea with three different majors. Our objective was to create a Pavilion to display wine history artifacts from the central coast. The project teams consist of architecture, construction management, and structural engineering majors. Each group was tasked with designing a portable pavilion that would achieve the desired objectives of the clients. At the end of the quarter the client will choose which project to be built. The roles of the different disciplines overlap, creating a project viewed at from many perspectives. …

Interdisciplinary Studio Pavilion [Isp] 2019, Albert J. Gutierrez

Construction Management

Historically Cal Poly’s motto has been ‘Learn by Doing’ and the College of Architecture and Environmental Design (CAED) is one of the leading examples of this. Many students gain valuable hands-on and real-world experience through collaborative projects and assignments. Through this learn by doing philosophy and collaborative learning approach Cal Poly construction management, architecture and architectural engineering students worked together in 8 separate studio teams to design and construct a portable pavilion for the Wine History Project of San Luis Obispo County. Acting as a client they requested that we design a portable pavilion space that will be used to …

Prototyping Elliptically Profiled Inverted Pendulum Walls In Cross-Laminated Timber (Clt) For Passive Self-Centering And Seismic Resiliency, Marco Lo Ricco

Theses and Dissertations

Cross-laminated timber (CLT) buildings garnered international attention, nearly a decade ago, for elevating wood construction to new heights on fully panelized assemblies of floors and walls. While highly regarded as a sustainable building material, use of CLT as a structural wall system depends on seismically resilient strategies like controlled rocking. This project prototyped elliptically profiled CLT panels and slotted-pin steel connections, at full-scale, to produce rolling and slip-friction inverted pendulum wall systems of one-story height and inspired by seismic isolation concepts. Digital fabrication realized elliptical profiles along the load-bearing edges of six 5-ply CLT panels and various customized slot shapes …

Is Transportation Planning Effective? A Critical Review Of Long-Range Regional Transportation Planning In The United States, Razieh Nadafianshahamabadi

Civil Engineering ETDs

The Federal-Aid Highway Act requires urban areas with a population greater than 50,000 to create Metropolitan Planning Organizations (MPOs) to ensure that funding for transportation projects and programs are based on a continuing, cooperative, and comprehensive planning process. A major responsibility of each MPO is the creation of a long-range transportation plan (LRTP) that addresses the transportation needs of a metropolitan region over the next twenty years or more. While long-range regional transportation planning goals have grown to include a wide range of concerns and technical methods for evaluating planning scenarios have advanced substantially over the past 50 years, there …

Northeastern Species In Hybrid Cross Laminated Timber, Hamid Kaboli

Doctoral Dissertations

Known in the building industry throughout the world, Cross Laminated Timber (CLT) is a massive timber building material with outstanding structural, fire, and seismic properties. CLT is a cost-competitive, sustainable construction material is a good candidate as a substitute material for concrete, masonry, and steel, in mid-rise and high-rise buildings. CLT is perpendicular layers of dimensional lumbers usually laminated together and forming a massive structural panel. This dissertation explores the viability of utilizing Massachusetts grown Eastern Hemlock and Eastern White Pine in CLT panels as pure or in conjunction with other high-value wood products. 59% of Massachusetts’ lands are covered …

Inception Through Inspection: Quality Control In The Simspon Strong Tie Materials Demonstration Lab, Allyson G. Forster

Construction Management

The purpose of this senior project is to create a quality control program in the Simpson Strong Tie (SST) Materials Demonstration Lab using BIM 360. The goal of this program is to help streamline the building process of the six-foot by eight-foot tiny home in Residential Construction Management. The SST laboratory activities have been developed in the true spirit of “learn by doing” and serve as a way for Construction Management (CM) students to interact with the building process directly. Students in the CM department are taught that quality begins at the inception of a job and should be monitored …

Investigation Of Grout - A Comparison Of Standard Grout Mix To Self-Consolidating Grout Mix, Rachel Garcia Chandler

Architectural Engineering

Masonry is a major structural material for low rise buildings, however the design of masonry buildings is rarely taught as a formal course at most universities. As part of the educational experience and to become familiar with the specifications and testing procedures for grouted masonry, a student run experiment on varying the water to cement ratio of masonry grout was conducted. The purpose is to report on the effects of changing the water-to-cement (W/C) ratios in a standard grout mix. The typical W/C ratio is approximately 0.80:1.00. In order to show the effects of increasing water in a grout mix, …

Reduce, Reuse, Reengineer, Neil Ryan Robertson, Anthony James Beers

Architectural Engineering

Our senior project is a research exploration of renewable energy. We recognized there is a major need in the world for the advancement of green power sources. For our project, we wanted to go beyond what we have learned in our Cal Poly architectural engineering classes and to use some of our own creativity to investigate the possibilities of renewable energy from a structural perspective. The guiding question we asked ourselves was, “as architectural engineering students, how could we shift our world to use more renewable energy?” To start our journey off, was the original inspiration from the work of …

Pedestrian Bridge In Tanzania, Maja Sagaser, Karina Rosales

Architectural Engineering

This senior project originated to address the need of the community of Same, Tanzania. There is a deep and wide ravine which floods, making the path many adults and children take to the Majevu Primary School increasingly difficult and dangerous. This report encapsulates all of the steps taken to complete an approved final design for a footbridge to be constructed over this ravine. It includes the project overview, the architectural and structural design process, as well as the important considerations. There are also structural drawings that include plans, elevations, and details.

Steel Test Set-Up For Non-Ductile Concrete Shear Walls, Colin S. Ridgley

Architectural Engineering

The purpose of this project was to provide a robust test set-up for the thesis work being conducted by graduate students, Jerry Luong & Rory de Sevilla. Their research aims to evaluate the feasibility of using fiber-reinforced polymer wraps and splay anchors to retrofit non-ductile concrete shear walls through a series of tests on reinforced concrete walls.

Four key constraints governed the design of the test set-up. First, the wall can be cyclically, laterally loaded to develop data for comparison with theoretical analysis methods. Second, the wall can be axially loaded to simulate interaction effects and prevent a sliding failure …

Parents For Joy, Atascadero All-Inclusive Playground, Harrison R. Tucker

Construction Management

Parents for Joy is an organization that was created in 2014 by a group of parents and families living around the Atascadero community who have children with special needs. The group raised over one million dollars to build a playground that enhances the safety of both children and adults with special needs, regardless of what needs they possess. Nick Volluci and Harrison Tucker, the author, were chosen to assist on this project in order to provide a high quality and methodical product that catered to the special requirements set forth by the owners, Parents for Joy and the City of …

Incorporation Of A Leed Green Associate Exam Prep Course Into The Construction Management Tech. Elective Selection, Jason Gendron

Construction Management

Since the development of LEED began in 1993, the construction industry has gradually been incorporating these certificates into every aspect of the field, predominantly the Commercial sector. With LEED becoming a major element impacting nearly every project, it is crucial for individuals to fully understand what LEED encompasses. As greater numbers of professionals in the industry have begun to strive for their LEED Accreditations, it has become apparent that it is far easier to prepare for these exams while in college when individuals have more time to do so rather than during employment. This project is an evaluation of the …

Framing Exterior Partitions For The Great Northern Services Housing Project, Patrick Pierre Shami

Construction Management

In the wake of a fire in Weed, CA that destroyed 150 homes, Great Northern Services (GNS), a nonprofit organization, reached out to Cal-Poly San Luis Obispo about a service-learning opportunity. This opportunity involved designing a single-family home and prefabricating the exterior partitions in San Luis Obispo. In Fall 2017, interdisciplinary teams of students delivered design proposals in the Integrated Project Delivery studio. The selected design was then finalized into a permitted set of drawings, and planning for the prefabrication began. The extent of the prefabrication was limited to the framing and sheathing of the exterior walls. The length of …

Sidewalks To Nowhere: A Tool To Prioritize Pedestrian Improvements, Ho Yan Lai

Master's Theses

Walkability as a concept that captures the ability to walk from one place to another has multiple dimensions. Between traversability to being a proxy for better urban places, there are also numerous measurements of walkability that attempts to quantify certain or all aspects of walkability. It is, however, unclear, through a review of available literature, how these measurements of walkability relate to each other statistically. This methodology focuses on generating a framework for analysts to evaluate and prioritize pedestrian infrastructure. WalkScore™ (WS), HCM Pedestrian Level of Service (PLOS), Average Nodal Degree (AND), and Intersection Density are the four metrics selected …

Prefabrication Of Exterior Partitions For Great Northern Services, John Christofer Claudio Espino

Construction Management

In the wake of a fire in Weed, CA that destroyed 150 homes, a non-profit organization called Great Northern Services (GNS) reached out to Cal-Poly San Luis Obispo about a service-learning opportunity that involved designing a single-family home and pre fabricating the exterior partitions in San Luis Obispo. In Fall 2017, interdisciplinary teams of students delivered design proposals in the Integrated Project Delivery studio. The selected design was then finalized into a permitted set of drawings and planning for the prefabrication began. The extent of the prefabrication was limited to the framing and sheathing of the exterior walls. The length …

Journeyman International - Rubagabaga Evc And Ace - Rwanda, Africa, Jake M. Stom

Construction Management

Rubagabaga EVC and ACE, or Empowering Villages Center and Agricultural Center of Excellence, is an interdisciplinary project based senior project completed by California Polytechnic State University, San Luis Obispo students. College of Architecture and Environmental Design students Jake Stom, Mackenzie Diaz, Julia De Hart, and Jenna Williams completed the design and preconstruction services with the help of non-profit humanitarian organization, Journeyman International. The deliverable aims to serve the client, Empowering Villages, by providing the complete design of a community center and agricultural training facility near Kaseke Village in Rwanda. The goal is to provide the local community with development efforts …

Journeyman International: Peace Academy Of The Sciences And The Arts, Alyssa L. Mathias

Construction Management

For years, K-12 education has been taught through separate, individual subjects such as Math, English, Art, and Science. Primary education has remained stagnant while our society is constantly evolving with technological advances and innovation. The Peace Academy of the Sciences and Arts in San Luis Obispo, California are a group of visionaries and educators challenging traditional learning styles. They are striving to offer an education that focuses on holistic learning and integrating all subjects into big ideas to create competent, compassionate leaders for the future. My senior project is a collaboration between Journeyman International, the Peace Academy, a student in …

Advanced Concrete Course For Cal Poly Construction Management Department, Dante N. Feliciano

Construction Management

This senior project provides a solution to the Construction Management Department at Cal Poly, San Luis Obispo whose curriculum lacks an individual Concrete course. With Concrete being one of the most used building material worldwide, this course will help immensely. The goal of this project is to fill the gap with an Advanced Concrete Course that is prepared and ready to be introduced to future students. The course has an emphasis on outside research learning – where the student gets to become the instructor. Carefully thought out and executed lecture materials are included in the course. Lecture slides give background …

Haiti Transitional Home: Solar Panel System Design, Kasey Riese Hetzel

Construction Management

Haiti is located in a region with optimal access to the sun’s rays, but not enough resources to make use of them. While the country is known for its limited access to electricity and unreliable power quality, it has the potential to become a renewable energy powerhouse. Providing a safe place for families to reunite under one roof, that runs solely on solar power is the ultimate goal of this project. Not only designing the most efficient system, but finding which products are available in country, and which products would be more cost effective to ship internationally was the intent …

Ciob Global Student Challenge – Evaluation Of Virtual And International Competitions Aimed At The Construction Management Curriculum, Nicklaus Bryce Wilcots

Construction Management

Each year the Chartered Institute of Building hosts a six-week virtual competition called the Global Student Challenge. Three Cal Poly Construction Management students and myself competed in this competition. This challenge was an international competition that gave students the ability to manage their own construction company. This competition is the gateway to enhancing higher-level education through academic competitions. Students competitions, such as the ASC competitions, have been shown to improve academic success as Cal Poly’s Learn by Doing methodology is utilized. However, the largest flaw with academic competitions is the negative impact on classes outside of construction management. The purpose …

Revision Of The Archicad Manual For Cm 115, Emma Wagner

Construction Management

Each CM 115: Fundamentals of Construction Management section contains a quarter long project, the goal of which is to familiarize the students with a modeling software. More so, the goal of the project is to introduce them to a set of construction documents- how to get started, what is included, what they need to pay attention to as a construction manager, and most importantly, to implement what they learn from their written coursework completed during class. This manual was written to help students complete this assignment to the best of their ability, producing a piece of work that shows they …

Financial Feasibility Of Leed Certified Buildings For Developers And Investors, Erik P. Henriksen

Construction Management

This is a case study on a small to mid-size private equity firm that deals with real estate development as well as investment to find out the financial feasibility of LEED certified buildings in today’s building climate. Interviews with two investment analysts at this firm who are versed in LEED certification about how it is looked at in their company as well as the broader industry will give insights into the feasibility of developing or investing in environmentally friendly buildings. This impacts the real estate and construction industries due to the fact that developers and investors are often times a …

Documentation Of Concrete Slabs Prior To Pours, Peter D. Riley

Construction Management

Concrete slabs in multi-level commercial building projects contain many components that become no longer visible once concrete has been poured. As building designs advance and continue to locate components in concrete, it is important to document what these slabs contain in order to verify accurate craftsmanship and allow for improved future construction workflows and building modernizations. This paper explores current industry needs for proficient documentation as well as practices to achieve this. A case study was conducted, testing four devices that analyzed feasibility factors for realistic implementation by a contractor such as cost, interoperability, and level of skill required for …

Detection Of Sand Boils From Images Using Machine Learning Approaches, Aditi S. Kuchi

University of New Orleans Theses and Dissertations

Levees provide protection for vast amounts of commercial and residential properties. However, these structures degrade over time, due to the impact of severe weather, sand boils, subsidence of land, seepage, etc. In this research, we focus on detecting sand boils. Sand boils occur when water under pressure wells up to the surface through a bed of sand. These make levees especially vulnerable. Object detection is a good approach to confirm the presence of sand boils from satellite or drone imagery, which can be utilized to assist in the automated levee monitoring methodology. Since sand boils have distinct features, applying object …

Geo-Spatial Mapping As A Catalyst For Creative And Engaged Design In Engineering Education, Jessie Zarazaga

Multidisciplinary Studies Theses and Dissertations

Exploiting the technology of geo-spatial mapping student designers can develop deep understandings of the rich and layered data of a spatial context, a situational understanding essential to responsible civic design. However the actions inherent in the construction of spatial data armatures can simultaneously be harnessed as creative strategies, in which mapping processes become the context for generative spatial play. The ambition of this study is to propose efficient pedagogic structures to help prepare civil and environmental student engineers to be not only strong participants, but leaders, in the design of the built environment. The interpretation of site data, mapped as …