Architecture Commons^™

Effect Of A Geothermal Heat Pump System On Cooling Residential Buildings In A Hot, Dry Climate, Rania Rushdy Moussa, Ayman H. Mahmoud

Architectural Engineering

ABSTRACT In the last century, electricity demand has doubled due to urban expansion, which has contributed to the formation of more urban heat islands (UHI) and the appearance of environmental hazards such as the global climate change phenomenon. Since residential buildings are considered the main electricity consumer sector in Egypt, they consume up to 42% of total energy consumption, which contributes to increasing temperatures and constitutes UHI in cities. In this context, the research aims to examine the effectiveness of using the closed vertical loop geothermal system (GSHPCV) for cooling residential buildings in a hot, dry climate, such as Cairo, …

The Neighborhood As An Energy-Generating Community The Case Of El-Banafseg Residential Neighborhood, East Cairo, Mona Helmy, Amany Micheal

Architectural Engineering

No abstract provided.

Overcoming The Limitations Of The Green Pyramid Rating System In The Egyptian Construction Industry: A Critical Analysis, Ahmed Osama Daoud, Ayman Ahmed Ezzat Othman, Obas John Ebohon, Ali Bayyati

Architectural Engineering

Despite the tangible contributions of the construction industry to social development and economic growth, it is known for its natural resources overconsumption and solid waste (SW) generation both of which have major negative impacts on the natural environment. In the particular case of materials waste, the construction industry worldwide accounts for about 50% of global annual generated SW. In addition, construction materials may contribute up to 50% of the total project cost. Accordingly, the negative implications of the construction industry have compelled many nations to develop green building rating systems in order to preserve the environment, promote the economic efficiency …

Early Supplier Involvement Framework For Reducing Construction Waste During The Design Process, Ayman Ahmed Ezzat Othman, Yomna Abdelghany El-Saeidy

Architectural Engineering

Purpose – The purpose of this paper is to develop a framework to facilitate early supplier involvement (ESI) as an approach for reducing construction waste (CW) generated during the design process. Design/methodology/approach – A research methodology consists of literature review, case studies and survey questionnaire was designed to achieve the abovementioned aim. First, the literature review was used to investigate CW, CW generated during the design process, the design process and ESI. Second, two construction projects were analysed to investigate the role of ESI towards reducing CW generated during the design waste. Third, a survey questionnaire was carried out with …

Achieving Sustainability Through Reducing Risks During Architecture Design Process: A Lean Management Perspective, Sherouk Abdelrehim, Ayman Ahmed Ezzat Othman

Architectural Engineering

The construction industry, as one of the largest industries in the world, plays a critical role in achieving national and international social and economic sustainable development goals. Socially, it is concerned with delivering long-term projects that turn client and end-user requirements into designs that specify technical aspects, functional specific requirements, and standards of quality. Economically, the construction industry contributes to a country's gross domestic product (GDP) by creating jobs and providing the country's infrastructure. the construction industry's nature is more vulnerable than other industries. This is believed to be due to the complex and dynamic nature of construction projects, as …

Causes Influencing Construction Waste Generation During The Design Process: An Analytical Study, Aya Saad, Ayman Ahmed Ezzat Othman

Architectural Engineering

Despite the social and economic contributions of the construction industry towards achieving sustainable development objectives, it has an adverse effect on the environment such as the generation of waste, water, and energy consumption. Construction waste (CW) is the loss of materials that are produced during or after the construction process and has no remaining value. Several countries promote waste elimination plans at early stages to reduce CW at its source. The Egyptian government is expanding its investments in new mega projects and infrastructure facilities like new administrative capital, bridges, roads, energy projects which resulted in increasing the rate and amount …

Quantifying Materials Waste In The Egyptian Construction Industry: A Critical Analysis Of Rates And Factors, Ayman Ahmed Ezzat Othman, Ahmed Osama Daoud Dr., Obas John Ebohon, Ali Bayyati

Architectural Engineering

Construction and demolition waste (CDW) is a critical challenge facing the construction industry. It leads to deterioration of the triple bottom line of sustainability. Unfortunately, the CDW management research in Egypt lacks studies investigating (1) the variations in CDW generation (CDWG) among different types of construction projects, and (2) the factors affecting CDW reduction (CDWR). Based on a benchmarking approach, this research (1) quantifies CDW in terms of generation rates and costs among different construction project types in Egypt, and (2) investigates the relationship between CDWG and different adopted CDWR factors. Using structured interviews, a comparative case study was conducted …

A Framework For Achieving Sustainability By Overcoming The Challenges Of The Construction Supply Chain During The Design Process, Ayman Ahmed Ezzat Othman, Nooran Alnassar

Architectural Engineering

This paper aims to develop a framework to achieve sustainability by overcoming the challenges of the construction supply chain (CCSC) during the design process. To achieve this, two approaches, namely theoretical and practical, were used to accomplish four objectives. For the theoretical approach, based on literature review and case studies, the objective used was to identify, classify and validate the challenges that the construction supply chain (CSC) encounter. For the practical approach, a survey questionnaire was employed to quantify the CCSC and investigate the perception of architectural design firms (ADFs) in Egypt towards achieving sustainability by overcoming the CCSC during …

Analyzing The Structural Properties Of Fire Clay Bricks After Adding Cigarette Filters, Karim Galal Abdullatif, Marianne N. Guirguis, Rania Rushdy Moussa

Architectural Engineering

Cigarette filters are one of the most littered objects in the world that damage the environment. Incorporation in construction bricks offers the prospect of limiting damage and solves the recyclability problem for a typical non-biodegradable waste. This paper aims to explore that prospect, by adding cigarette filters in the production of two samples of fired clay bricks with the cigarette filters comprising 5% and 10% of the volume. The mixing and molding processes were done manually which had an effect on the bricks when tested, The results of testing were corresponding with those of previous studies (outside Egypt), however, only …

Installing Piezoelectric Tiles In Children Outdoor Playing Areas To Create Clean & Healthy Environment; Case Study Of El-Shams Sporting Club, Cairo_Egypt, Rania Rushdy Moussa

Architectural Engineering

The pollution rate has increased during the last decades, the increasing percentage of CO2 and methane causes environmental problems such as changing in climate and rising of new diseases that jeopardize the public health. Creating a clean and healthy environment is an essential goal to protect the planet and human race. The environmental changes became a great issue all over the world especially in the developing countries such as Egypt, lately the electricity generation process and the heavy usage of fossil fuel increased the numbers of children infected by asthma and lung problems due to the air pollution. In order …

Achieving Sustainability Through Reducing Construction Waste During The Design Process: A Value Management Perspective, Ayman Ahmed Ezzat Othman, Sherouk Mohamed Abdelrahim

Architectural Engineering

Purpose:

The purpose of this paper is to investigate the role of Value Management towards achieving sustainability through reducing the construction waste during the design process.

Design/methodology/approach

To achieve the abovementioned aim, a research methodology consisting literature review and survey questionnaire is designed to achieve the following objectives: first, building a comprehensive understanding of the research topic through reviewing literature related to the nature of the construction industry, waste in construction, sustainability, the design phase and Value Management; second, presenting and analysing two case studies to validate the role of Value Management towards reducing waste in construction projects; third, conducting …

An Investigation Into Solid Waste Problem In The Egyptian Construction Industry: A Mini-Review, Ahmed Osama Daoud, Ayman Ahmed Ezzat Othman, Herbert Robinson, Ali Bayyati

Architectural Engineering

Solid waste management (SWM) is one of the most critical global challenges nowadays. It has a severe negative effect on the triple bottom line of sustainability. Construction and demolition waste (CDW) contributes about 50% of the total global annual generated SW. In the particular case of the Middle East and North Africa (MENA) region including Egypt, the SW problem has become a major challenge, and the need to find sustainable solutions is overwhelming. However, the region faces several challenges that hinder the development of an effective and efficient SWM system. This has resulted in the predominance of unsustainable SWM practices …

Energy-Scape Web-Based Application Is An Effective Tool To Overcome The Basic Knowledge Of Architects Toward Renewable Energy Properties, Rania Rushdy Moussa, Khaled M. Dewidar

Architectural Engineering

In last few years, research on renewables were shifted from integrating renewable energy (RE) with buildings into integrating renewable energy (RE) within urban environment due to the large occupies of urban areas in comparing to the building foot print. Urban areas such as urban landscape areas have a great potential in generating huge amount of energy that could satisfy the needs of urban neighbor-hoods. The presented research identify the properties of a new elements called Energy-scape elements (ESE) that integrates RE devices with urban landscape elements. This research focuses on analyzing the efficiency of web-based application called “Energy-scape software” (ESS) …

A Framework To Activate The Health And Safety Regulations In The Egyptian Construction Industry, Mostafa Adel Elsebaei, Ayman Ahmed Ezzat Othman, Omar Elnawawy, Mohammed Badawy

Architectural Engineering

Purpose

The construction industry is considered one of the most dangerous industries especially in developing countries such as Egypt. Although safety in Egypt is regulated by mainly four pivotal legislations, namely, Law No. 12 (2003) and Ministerial Decrees No. 211, 126 and 134, construction accident records in Egypt are high. Accordingly, this paper aims to develop a framework to activate the health and safety regulations in the Egyptian construction industry.

Design/methodology/approach

To achieve this aim, a research methodology consisting of a literature review and a survey questionnaire was developed to accomplish three objectives. First, a literature review was used to …

A Framework For Implementing Integrated Project Delivery In Architecture Design Firms In Egypt, Ayman Ahmed Ezzat Othman, Lamis Yasser Wagih Youssef

Architectural Engineering

Purpose

This paper aims to develop a framework for implementing the integrated project delivery (IPD) approach during the design process in architecture design firms (ADFs) in Egypt.

Design/methodology/approach

A research methodology consists of literature review, case studies and survey questionnaire was designed to achieve the abovementioned aim. First, literature review was used to identify and categorise the challenges of implementing IPD during the design process. Second, four case studies were analysed to investigate the values delivered to the client or missed due to the use of IPD or traditional procurement approaches, respectively. Finally, a survey questionnaire was carried out with …

Elements Of Safety Management System In The Construction Industry And Measuring Safety Performance – A Brief, Mostafa Elsebaei, Omar Elnawawy, Ayman Ahmed Ezzat Othman, Mohamed Badawy

Architectural Engineering

Construction industry is considered to be one of the most hazardous industries in the world. The reason could be attributed to its hazardous nature as it is an accident-prone industry. Thus, a need for better understanding of safety management system is essential for improving safety performance in this sector. This paper discusses briefly the elements of safety management by presenting different systems (such as Oregon OSHA Occupational Health and Safety Administration, and OTAR Overseas Territories Aviation Circle) and elaborating their elements. It also discusses two types of measuring safety performance the first is the lagging indicators and the second is …

The Effect Of Piezo-Bumps On Energy Generation And Reduction Of The Global Carbon Emissions, Rania Rushdy Moussa

Architectural Engineering

Nowadays, renewable energy sources are taking high place in research agenda. In the last centuries, human activities are overloading the environment and the atmosphere with pollutant and carbon emissions which affect negatively the climate and produce global problems such as ozone depletion and global warming. Electricity could be considered as the most contributor part in these climate problems, the production of electricity overloads the environment by carbon emissions. Moreover, the production of domestic oil and natural gas are decreasing every day and relying on these type of Energy sources is no longer an option. Developing and implementing renewable energy approach …

Investigation On Utilizing Garbage As A Resource For A Sustainable Neighbourhood: Case Study Of A Neighbourhood In New Cairo, Egypt, Marianne N. Guirguis, Rania Rushdy Moussa

Architectural Engineering

Waste management comprises the actions required for managing waste material produced from human activities from its source of origin to its final removal. Usually, it collects resources from all forms of matter such as gaseous, liquid, solid, and radioactive. This action is made to avoid the negative effects of wastes on the environment and human wellbeing. The effect of accumulating waste may be highly severe for numerous communities in developing countries such as Egypt. Egyptian neighbourhoods suffer from effects of accumulating local wastes and garbage. Public health and the visual image of the neighbourhoods, in addition to the different social, …

Piezoelectric Tiles Is A Sustainable Approach For Designing Interior Spaces And Creating Self- Sustain Projects., Madonna M. Solban, Rania Rushdy Moussa

Architectural Engineering

These days, the third worlds countries such as Egypt are facing a hug challenge toward energy production. Energy crisis is the most critical issue facing these developing countries. In the recent couple of years Egypt has experienced a serious shortage in the power supply which affect negatively the industry sector as well as the residential sector due to the shortage of natural gas production and fossil fuel which prevented the government from providing the basic needs of Energy to the community. Moreover, it affects negatively the developing of this country and building a new mega projects. Renewable energy sources can …

Managing Risks Associated With The Jbcc(Principal Building Agreement) From Thesouth African Contractor’S Perspective, Ayman Ahmed Ezzat Othman, Nishani Harinarain

Architectural Engineering

Construction is a complex and risky business. It is a time-consuming process involving a multitude of organisations with different objectives and skills. In addition, increasing client expectations coupled with the technological development of materials and equipment made the construction industry subject to more risks than any other industry. Contracts are essential tools for organising the relationship between involved parties and managing associated risk. For years the South African construction industry had a very poor reputation in managing construction risks. In order to improve the image of the South African construction industry and to assist contractors to develop their proper risk …

Incorporating Value And Risk Management Principles In Developing Low-Income Housing Projects, Ayman Ahmed Ezzat Othman

Architectural Engineering

The construction industry is concerned with satisfying its customers’ needs through delivering projects that achieve their objectives and meet their expectations on time, within budget and as specified. Despite the several housing programmes constructed by government authorities, there is a real housing problem for the poor. This problem is attributed to a number of reasons. Amongst them, the inability of the low-incomers to cover the cost of supplied houses and the lack of the constructed projects to achieve users’ satisfaction. This highlighted the need to develop innovative and creative solutions that can deliver housing projects that achieve the satisfaction of …