Architecture Commons^™

Dispute Resolution Under The Principal Irish Forms Of Building Contract, Tony Cunningham

Other Resources

The construction industry is known to be litigious (Latham, 1994). This is hardly surprising given the industry’s fragmented nature in which project teams comprising an extensive network of employers, designers and constructors are brought together to deliver once-off projects, following which, the organisation is almost always disbanded. The short term objectives of the various groupings are often competing and occasionally incompatible. For example, many employers will wish to minimise costs in developing a project, designers may resist pressures on budgets in order to safeguard their ‘brand’, and the commercial imperative of maximising profit will drive contractors towards charging what the …

Risk Allocation Under The Principal ‘Traditional’ Irish Forms Of Building Contract, Tony Cunningham

Other Resources

Construction projects are risky ventures. Risks are inevitable and cannot be entirely eliminated but they can be transferred through appropriate wording in the clauses of a contract. Construction contracts allocate particular risks between the parties in order to identify who bears the cost if a particular risk comes to pass.

This study examines how contractual risks are allocated to the contracting parties under the Royal Institute of Architects in Ireland Form, 2012 version, where quantities form part of the contract, commonly known as ‘the Yellow Form’, and the Public Works Contract PW CF1 Form v 1.10, 2014 where the design …

Cost Control During The Pre-Contract Stage Of A Building Project – An Introduction, Tony Cunningham

Other Resources

Cost overruns are commonplace on construction projects.

One of the most important tasks carried out by quantity surveyors (QS) involves providing advice to clients and design team colleagues to enable the design to be finalised within the approved budget. This financial management process is referred to as cost control. Cost control seeks to deliver a high degree of cost certainty during the various stages of the building project in order that the project can be completed within budget. Successful projects are those which are delivered to the required quality standards, on time, and within budget. Effective cost management therefore is …

A Fiscal Model Program Theory Proposal For Training Reentry Citizen Ex-Convicts To Remodel Abandoned Houses, James A. Hanson

Department of Educational Administration: Dissertations, Theses, and Student Research

The purpose of this study was to develop and examine a fiscal program theory model and proposal for training reentry citizen ex-convicts to remodel abandoned houses. A sustainable program theory model describes ways that training and employing these citizens to remodel abandoned houses may be expected to have benefits to a community. The recently released ex-convicts will learn a construction trade, earn a sustainable wage, and the once-abandoned houses will be returned to the city tax rolls. Vocational education and workforce training are key to this program. The literature indicates that national jobless rates for recently released inmates is well …

The Question Of Slim | A Critical Look At Manhattan's Recent Trend Towards Slenderness, Raymond Sova

Architecture Senior Theses

Manhattan’s real estate market since the turn of the 20th century to present day can be characterized as an extreme optimization of the economical elements of architecture. Most of the buildings in Manhattan’s diverse and complex skyline share a tenacious desire to maximize the profitability and feasibility of a site while minimizing overall building expenditure. This concept is defined in Koolhaas’s ‘Delirious New York,’ as the relationship between “the Needle” and “the Globe.” Seemingly immeasurable wealth and investment have given rise to a new sub-typology of super-tall strikingly skinny (Slim) residential skyscrapers that may very well result in the demise …

Hacking The Urban Village | Architecture As Board Game, Xuyun Liu

Architecture Senior Theses

This thesis proposes the board game as a new research methodology and platform for the study of southern China's urban villages.

Hacking the Urban Village examines the urban villages that have, in recent decades, become a common but informal settlement type in China as a result of China's unprecedented period of urbanization.

This research forms the contextual core of a board game where game settings present the current urban conditions and players may explore alternative forms of urbanism. The board game offers players the opportunity to investigate both he formal conditions of the urban village life along with it attendant …

Tender Documentation For Construction Projects - An Overview, Tony Cunningham

Other Resources

The tender documents form the basis of the contractor’s offer to construct the works. The tender documents are the means by which the employer’s design and/or works requirements are communicated to the tendering contractors. These inform the contractor of the scope and detail of the project, the conditions under which the work will be executed, and they identify the rights and obligations of the various participants under the proposed contract. The tender documents enable contractors to price the works requirements and submit an offer (bid) which, if accepted by the employer becomes a binding contract. Some of the tender documents …

"Defining Job Titles And Career Paths In Bim", Malachy Mathews

Conference papers

Ireland is undergoing a digital transformation. Some industries particularly in the areas of travel and retail have been radically transformed. However many industries are facing their biggest challenge in their existence already weakened by the economic crisis and constrained by their legacy business, it will be difficult for them to adapt and embrace the new rules dictated by digital change. Irelands design and construction industry is on the cusp of a digital transformation with early adopters now deriving some benefits from a move to a building information modeling (BIM) process. Digital transformation cannot happen unless there are personnel with the …

Appointing Main Contractors For Construction Work In The Republic Of Ireland. – An Overview., Tony Cunningham

Other Resources

This study examines the various options available for a client to appoint a contractor. The study investigates open tendering, selective tendering, prequalification, two stage selective tendering, competitive dialogue, negotiation and serial tendering. In most building contracts the contractor is selected on the basis of competitive tendering. The price which the contractor quotes for the job is heavily influenced by both the amount and intensity of the competition. Even in the case of negotiated tenders there is implicit competition, as the employer can break off negotiations. If there is no competition the contractor can, in effect, ‘name his price’. This study …

Composing Descriptions For Bills Of Quantities In Accordance With Arm 4 – Worked Examples, Tony Cunningham

Other Resources

Two basic skills are at the heart of the measurement process: quantification and description. Descriptions answer the question, what is it? This paper examines the process of composing descriptions for bills of quantities measured in accordance with the ARM4 (Agreed Rules of Measurement). This process involves ‘translating’ design information contained in models, drawings and specifications into bill descriptions in order to enable tendering contractors to accurately price the work. The quantity surveyor’s task is to effectively communicate the cost significant information so that the estimator can visualise what is being described.

Descriptions contained in bills of quantities measured in accordance …

Measuring Building Perimeters And Centrelines - Worked Examples, Tony Cunningham

Other Resources

Quantity surveyors are expected to be able to measure the perimeters of buildings as part of their routine practice. Building perimeter measurements are very useful in finding out the overall lengths of foundations, external walls, external wall finishes and associated items. One of the earliest difficulties faced by quantity surveying and construction management students, is mastering the technique of calculating perimeters of awkwardly shaped building plans. The student is typically required to calculate a perimeter and adjust this to derive the centrelines of various elements in the associated construction details. In this paper, the author aims to explain these processes, …

Ogden College Of Science & Engineering Newsletter (Fall 2015), Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Bim; Postgraduate Multidisciplinary Collaborative Education, Malachy Mathews

Conference papers

BIM Technologies and Process are steadily increasing in the design and construction industry. The amount of undergraduate courses delivering BIM based applied and theory courses is also on the rise. These students will be entering a job market where their skillsets in digital modelling and collaborative practice will be in demand. However, existing AEC (architectural, engineering, construction) professionals are recognising the changes happening in the industry. Each domain is influenced and challenged by BIM. The traditional process and workflows will change as BIM adoption grows. Tobin [1] states the long-term impact of any innovation is often not understood when it …

A Cost-Effective Integral Bridge System With Precast Concrete I-Girders For Seismic Application, Justin R. Vander Werff, Rick Snyder, Sri Sritharan, Jay Holombo

Faculty Work Comprehensive List

To promote accelerated bridge construction in seismic regions, a large-scale experimental investigation was conducted to examine the seismic sufficiency of precast concrete I-girders in integral bridge super-structures. Such structures are not frequently used in high seismic regions due to lack of design guides and overly conservative design approaches. A half-scale,17.8 m (58.5 ft) long test unit modeling a portion of a prototype bridge incorporating a concrete column, ten I-shaped precast concrete girders, and an inverted-tee concrete cap beam was used to experimentally verify that precast concrete members employing accelerated construction techniques can be used in integral super-structures and provide excellent …

Ogden College Of Science & Engineering Newsletter (Summer 2015), Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Assessing Gait And Postural Stability Of Construction Workers Using Wearable Wireless Sensor Networks, Houtan Jebelli

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Falling accidents are a leading cause of fatal and nonfatal injuries in the construction industry. This fact demonstrates the need for a comprehensive fall-risk analysis that incorporates the effects of construction workers’ physiological characteristics. In this context, the objective of the thesis is to investigate and validate the usefulness of the gait- and postural-stability metrics in assessing construction workers’ fall risks. Diverse metrics that assess the capability to keep the body balanced and maintain coordination of body segments during locomotion (gait stability) and stationary postures (postural stability) have been introduced and used in clinical applications. However, their usefulness in the …

Ogden College Of Science & Engineering Newsletter (Spring 2015), Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Umass Amherst Campus Master Plan Sustainability Chapter, Ludmilla Pavlova-Gillham, Nariman Mostafavi, Mohamad Farzinmoghadam, Kylie A. Landrey, Somayeh Tabatabaee Pozveh, Ezra Small, Ted Mendoza, Jason J. Burbank, Robert Ryan, Dennis Swinford, Niels La Cour, Alexander Stepanov

Campus Planning Master Plans

The UMass Amherst Campus Master Plan Sustainability Chapter articulates the manner in which the Campus Master Plan 2012 principles translate into specific recommendations for campus systems development in support of future smart growth. It summarizes the current physical campus-scale planning projects that Facilities & Campus Services have completed during and after the Master Plan process, and incorporates other operational and educational initiatives that have engaged our campus community as we plan for sustainability.

The CMP Chapter is organized in three major sections: i) sustainability overview; ii) campus master plan systems; iii) current initiatives; and iv) next steps. The first section …

Syllabus: Public Space Design Plus: Integrating Sustainable Design Through Exploration And Research, Carolina Aragon

Sustainability Education Resources

This studio focuses on the integration of sustainable technologies into the design of a public space on campus. We will explore this integration at various scales: the human scale, the site scale, and the campus scale ––while covering subjects like materiality, people’s behavior, and innovative sustainable solutions for landscape applications. The work of the studio will be a combination of creative exploration and research supporting this exploration. The methodology will include experiential learning ––learning by doing, research through direct observation, and research using library resources. Through research and use of library databases, students will gain a broader perspective of the …

Syllabus: Solar Energy Systems And Building Design, Ho-Sung Kim

Sustainability Education Resources

This course introduces the fundamental concepts of solar building design and energy systems. Through project based study and possible field visits, students will explore the theory, technologies, applications, and benefits of solar design of buildings and discover how to utilize solar energy systems for residential and commercial buildings. Students will be required to research and document technology and complete a semester case study project in which they will examine various energy conservation aspects and economics underlying solar energy systems.

Ogden College Of Science & Engineering Newsletter (Winter 2015), Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Higher Hourly Cost Compensation For Heavy Equipment Used In Demolition Activity, Mark Shaurette

School of Construction Managment Technology Faculty Publications

Demolition activity is increasingly dependent on heavy equipment as the primary means of dismantlement. This mechanized wrecking process qualifies as a severe working condition for the heavy equipment employed. Demolition practitioners note that the severe conditions encountered increase the operating cost of the equipment employed. There are occasions when unexpected project conditions or disaster response necessitate negotiated compensation for demolition services. In these negotiations, hourly cost references are utilized by contracting agencies to benchmark hourly billings. Supervising engineers recommend using the hourly values quoted in national cost references for standard construction services because no specific guidance for cost adjustment is …

Ua3/1/5/3 President's Office-Cherry Campus Building Campaign, Wku Archives

WKU Archives Collection Inventories

Records created by the President's Office during the Henry Cherry administration regarding the construction of WKU. This series is not completely processed.

Ua11/3 Public Affairs Building & Construction File, Wku Archives

WKU Archives Collection Inventories

Records regarding campus buildings and construction projects used for writing press releases. Includes construction information sheets, press releases and clippings from newspapers around the state.

Ua3/8/1 President's Office-Meredith Correspondence / Subject File, Wku Archives

WKU Archives Collection Inventories

Correspondence and subject files created by the President's Office during Thomas Meredith's tenure as president of WKU.

Ventilation Rates And Airflow Pathways In Patient Rooms: A Case Study Of Bioaerosol Containment And Removal, Ehsan S. Mousavi, Kevin R. Grosskopf

Durham School of Architectural Engineering and Construction: Faculty Publications

Most studies on the transmission of infectious airborne disease have focused on patient room air changes per hour (ACH) and how ACH provides pathogen dilution and removal. The logical but mostly unproven premise is that greater air change rates reduce the concentration of infectious particles and thus, the probability of airborne disease transmission. Recently, a growing body of research suggests pathways between pathogenic source (patient) and control (exhaust) may be the dominant environmental factor. While increases in airborne disease transmission have been associated with ventilation rates below 2 ACH, comparatively less data are available to quantify the benefits of higher …

Air Change Rate Vs Airflow Pathway: Bioaerosol Containment And Removal In Patient Rooms, Kevin R. Grosskopf

Durham School of Architectural Engineering and Construction: Faculty Publications

Recent studies have shown that higher air change rates may have the unintended consequence of creating turbulent airflows that entrain high concentrations of infectious particles within the breathing zone, and possibly, breakdown pressure relationships necessary to contain the spread of infectious particles to other clinical spaces.

Use Of Fiber-Reinforced Cements In Masonry Construction And Structural Rehabilitation, Ece Erdogmus

Durham School of Architectural Engineering and Construction: Faculty Publications

The use of fiber reinforcement in traditional concrete mixes has been extensively studied and has been slowly finding its regular use in practice. In contrast, opportunities for the use of fibers in masonry applications and structural rehabilitation projects (masonry and concrete structures) have not been as deeply investigated, where the base matrix may be a weaker cementitious mixture. This paper will summarize the findings of the author’s research over the past 10 years in these particular applications of fiber reinforced cements (FRC). For masonry, considering both mortar and mortar-unit bond characteristics, a 0.5% volume fraction of micro fibers in type …

A Review Of Approaches For Sensing, Understanding, And Improving Occupancy-Related Energy-Use Behaviors In Commercial Buildings, Hamed Nabizadeh Rafsanjani, Changbum R. Ahn, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Buildings currently account for 30–40 percent of total global energy consumption. In particular, commercial buildings are responsible for about 12 percent of global energy use and 21 percent of the United States’ energy use, and the energy demand of this sector continues to grow faster than other sectors. This increasing rate therefore raises a critical concern about improving the energy performance of commercial buildings. Recently, researchers have investigated ways in which understanding and improving occupants’ energy-consuming behaviors could function as a cost-effective approach to decreasing commercial buildings’ energy demands. The objective of this paper is to present a detailed, up-to-date …

Adaptive Predictive Functional Controller, Fadi Alsaleem, Arvind Rao

Durham School of Architectural Engineering and Construction: Faculty Publications

A controller device and a method for controlling a system that utilizes an adaptive mechanism to self-learn the system char acteristics and incorporates this adaptive self-learning ability to predict a control parameter correctly to provide precise control of a system component.