Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- Evaporative Cooling (3)
- Low Energy Cooling (3)
- Chilled Beams (2)
- Chilled Ceilings (2)
- Cooling Towers (2)
-
- Free Cooling (2)
- Rheology (2)
- 3D full-field displacement (1)
- ASCE-LFRD pre-standard for FRP structures (1)
- Aggregate distribution (1)
- Bridge girders (1)
- Building beams (1)
- CFRP (1)
- COP (1)
- Calcium aluminate cement (1)
- Calcium sulfoaluminate cement (1)
- Carbon fiber reinforced polymer sheets (1)
- Chemical admixture (1)
- Chilled Ceiling Panels (1)
- Displacement Ventilation (1)
- Eco-efficient cement (1)
- Energy Efficiency (1)
- Energy Performance of Buildings (1)
- Failure modes (1)
- Filler effect (1)
- Flexural strength (1)
- Fly ash (1)
- Gamma-ray CT (1)
- Hydration (1)
- Hydration kinetics (1)
- Publication Year
- Publication
-
- Civil, Architectural and Environmental Engineering Faculty Research & Creative Works (11)
- Articles (3)
- Civil & Environmental Engineering Faculty Publications (2)
- Chemical and Biochemical Engineering Faculty Research & Creative Works (1)
- Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works (1)
Articles 1 - 18 of 18
Full-Text Articles in Architecture
Advancing Simultaneous Extraction And Sequential Single-Particle Icp-Ms Analysis For Metallic Nanoparticle Mixtures In Plant Tissues, Lei Xu, Xingmao Ma, John Yang, Joel G. Burken, Paul Ki-Souk Nam, Honglan Shi, Hu Yang
Advancing Simultaneous Extraction And Sequential Single-Particle Icp-Ms Analysis For Metallic Nanoparticle Mixtures In Plant Tissues, Lei Xu, Xingmao Ma, John Yang, Joel G. Burken, Paul Ki-Souk Nam, Honglan Shi, Hu Yang
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Engineered Nanoparticles (ENPs) Have Been Increasingly Used in Agricultural Operations, leading to an Urgent Need for Robust Methods to Analyze Co-Occurring ENPs in Plant Tissues. in Response, This Study Advanced the Simultaneous Extraction of Coexisting Silver, Cerium Oxide, and Copper Oxide ENPs in Lettuce Shoots and Roots using Macerozyme R-10 and Analyzed Them by Single-Particle Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Additionally, the Standard Stock Suspensions of the ENPs Were Stabilized with Citrate, and the Long-Term Stability (Up to 5 Months) Was Examined for the First Time. the Method Performance Results Displayed Satisfactory Accuracies and Precisions and Achieved Low Particle Concentration …
Effect Of Class C And Class F Fly Ash On Early-Age And Mature-Age Properties Of Calcium Sulfoaluminate Cement Paste, Sukanta K. Mondal, Carrie Clinton, Hongyan Ma, Aditya Kumar, Monday Uchenna Okoronkwo
Effect Of Class C And Class F Fly Ash On Early-Age And Mature-Age Properties Of Calcium Sulfoaluminate Cement Paste, Sukanta K. Mondal, Carrie Clinton, Hongyan Ma, Aditya Kumar, Monday Uchenna Okoronkwo
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
To Promote the Sustainable Development of Eco-Efficient Calcium Sulfoaluminate (CSA) Cements through the Partial Replacement of the CSA Clinker with Supplementary Cementitious Waste Products, the Effects of Coal Fly Ashes on the Early-Age and Mature-Age Properties of a Calcium Sulfoaluminate (CSA)-Based Cement Paste Were Investigated. the Impacts of Both Class C and Class F Fly Ashes on the Rheological Properties, Hydration Kinetics, and Compressive Strength Development of CSA Cement Paste Were Studied. Rheology-Based Workability Parameters, Representing the Rate of Loss of Flowability, the Rate of Hardening, and the Placement Limit, Were Characterized for the Pastes Prepared with Fixed Water-To-Cement (W/c) …
Point Density For Soil Specimen Volume Measurements In Image-Based Methods During Triaxial Testing, Sara Fayek, Xiong Zhang, Javad Galinmoghadam, Jeffrey D. Cawlfield
Point Density For Soil Specimen Volume Measurements In Image-Based Methods During Triaxial Testing, Sara Fayek, Xiong Zhang, Javad Galinmoghadam, Jeffrey D. Cawlfield
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Discrete Measurement Targets Were Frequently Utilized in Image-Based Methods on the Specimen's Surface to Monitor the Soil Specimen during Triaxial Testing. However, the Required Density of Measurement Targets that Should Be Used in Triaxial Testing to Achieve Highly Accurate Volume Measurement Has Not Been Investigated. to overcome This Limitation, This Paper Presents a Parametric Study to Determine the Optimum Target/point Densities to Be Utilized on the Triaxial Soil Specimen Surface to Achieve the Desired Level of Volume Measurement Accuracy in Image-Based Methods. LiDAR Scanning Was Applied to Establish the "Ground Truth" Volume of the Specimen. the Effects of Deformation and …
Measurement Of Volumetric Deformation, Strain Localization, And Shear Band Characterization During Triaxial Testing Using A Photogrammetry-Based Method, Sara Fayek, Xiong Zhang, Xiaolong Xia, Qingqing Fu, Jeffrey D. Cawlfield
Measurement Of Volumetric Deformation, Strain Localization, And Shear Band Characterization During Triaxial Testing Using A Photogrammetry-Based Method, Sara Fayek, Xiong Zhang, Xiaolong Xia, Qingqing Fu, Jeffrey D. Cawlfield
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Triaxial Testing Has Been Routinely Used as a Standard Laboratory Test that Allows Correct Determination of Soil Characteristics. Previously the Volumetric Strain of the Triaxial Specimen Was Considered to Be Uniformly Distributed Along with the Specimen during the Isotropic and Deviatoric Loading. Although This Assumption Might Hold True under Isotropic Loading, the Effects of Restrained Ends and Disturbance during the Procedures of Specimen Installation and Testing Can Cause Nonuniform Strains throughout the Whole Specimen. This Paper Investigates the Effects of Specimen Preparation and Misalignment on the Strain Uniformity Along with the Soil Specimen during Triaxial Testing. a Series of Consolidated …
Quantifying The Workability Of Calcium Sulfoaluminate Cement Paste Using Time-Dependent Rheology, Sukanta K. Mondal, Adam Welz, Carrie Clinton, Kamal Khayat, Aditya Kumar, Monday Uchenna Okoronkwo
Quantifying The Workability Of Calcium Sulfoaluminate Cement Paste Using Time-Dependent Rheology, Sukanta K. Mondal, Adam Welz, Carrie Clinton, Kamal Khayat, Aditya Kumar, Monday Uchenna Okoronkwo
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Poor workability is a common feature of calcium sulfoaluminate (CSA) cement paste. Multiple chemical admixtures, such as set retarders and dispersants, are frequently employed to improve the workability and delay the setting of CSA cement paste. A quantitative assessment of the compatibility, efficiency, and the effects of the admixtures on cement paste workability is critical for the design of an appropriate paste formulation and admixture proportioning. Very limited studies are available on the quantitative rheology-based method for evaluating the workability of calcium sulfoaluminate cement pastes. This study presents a novel and robust time-dependent rheological method for quantifying the workability of …
Hydration Of High-Alumina Calcium Aluminate Cements With Carbonate And Sulfate Additives, Jonathan Lapeyre, Sai Akshay Ponduru, Monday Uchenna Okoronkwo, Hongyan Ma, Aditya Kumar
Hydration Of High-Alumina Calcium Aluminate Cements With Carbonate And Sulfate Additives, Jonathan Lapeyre, Sai Akshay Ponduru, Monday Uchenna Okoronkwo, Hongyan Ma, Aditya Kumar
Chemical and Biochemical Engineering Faculty Research & Creative Works
This study investigated the influence of limestone (LS) and calcium sulfate (C$) mineral additives on the hydration kinetics of high-α-Al2O3 calcium aluminate cement (CAC) utilizing experimental techniques and thermodynamic simulations. Increasing the replacement level of limestone or calcium sulfate increased the cumulative heat of the hydration reaction. The limestone exhibited limited acceleratory effects to the CAC hydration kinetics due to the coarseness of the powder. The coarse particle size distribution limited any heterogenous nucleation that would have occurred with a finer particle size as well as the intrinsic insolubility kinetically limits the formation of monocarboaluminate phases. Conversely, …
Feasibility Study Of Implementing Gamma-Ray Computed Tomography On Measuring Aggregate Distribution And Radiation Shielding Properties Of Concrete Samples, Omar Farid, Nima Farzadnia, Kamal Khayat, Muthanna H. Al-Dahhan
Feasibility Study Of Implementing Gamma-Ray Computed Tomography On Measuring Aggregate Distribution And Radiation Shielding Properties Of Concrete Samples, Omar Farid, Nima Farzadnia, Kamal Khayat, Muthanna H. Al-Dahhan
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Aggregate segregation is one of the key defects that impair the performance of concrete at fresh and hardened stages. This study aims to assess the feasibility of using an advanced technique to identify/scan/determine the aggregate segregation of concrete elements and determine radiation shielding properties of the concrete. The gamma-ray computed tomography (γ-CT) technique was employed to study aggregate distribution/dispersion in self-consolidating concrete (SCC). Accordingly, two SCC mixtures with moderate segregation (MS) and high segregation (HS) levels were cast and compared with highly stable SCC with no segregation (NS). The γ-CT scans were located on three different levels of concrete specimens …
Examining The Effect Of A Chitosan Biopolymer On Alkali-Activated Inorganic Material For Aqueous Pb(Ii) And Zn(Ii) Sorption, Sukanta K. Mondal, Chenglin Wu, Felix C. Nwadire, Ali A. Rownaghi, Aditya Kumar, Yusuf Adewuyi, Monday Uchenna Okoronkwo
Examining The Effect Of A Chitosan Biopolymer On Alkali-Activated Inorganic Material For Aqueous Pb(Ii) And Zn(Ii) Sorption, Sukanta K. Mondal, Chenglin Wu, Felix C. Nwadire, Ali A. Rownaghi, Aditya Kumar, Yusuf Adewuyi, Monday Uchenna Okoronkwo
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Biopolymers and alkali-activated materials have attracted a great deal of attention as adsorbents for the removal of heavy metal contaminants from aqueous solutions. Both materials are sustainable and feature unique properties, but biopolymers are relatively more expensive or difficult to prepare and exhibit low mechanical and surface properties, a narrow pH range, and thermal stability. In this study, hybrid adsorbents were prepared from both types of material, by alkali activation of low-cost fly ash precursors accompanied by incorporation of 0-2%mass chitosan biopolymer. Two types of alkaline activating solutions, NaOH and Na2SiO3, were employed to generate two sets of hybrid adsorbents …
Strengthening Prestressed Concrete Bridge Girders And Building Beams With Carbon Fiber Reinforced Polymer Sheets, Herish A. Hussein, Zia Razzaq
Strengthening Prestressed Concrete Bridge Girders And Building Beams With Carbon Fiber Reinforced Polymer Sheets, Herish A. Hussein, Zia Razzaq
Civil & Environmental Engineering Faculty Publications
The effect of Carbon Fiber Reinforced Polymer (CFRP) retrofitting and concrete type on the flexural strength of prestressed concrete I-section girders used in bridges and beams in buildings is investigated. Non-linear moment-curvature relationships are predicted using an iterative algorithm for both non-retrofitted and CFRP-retrofitted prestressed concrete girder and beam cross-sections with various concrete types. Two different CFRP-retrofitting schemes are analyzed for comparing their effectiveness. It is found that although non-retrofitted beam section exhibits greater ductility, the use of CFRP retrofitting in both tension and compression regions simultaneously results in a significant increase in flexural strength. It is also found that …
Failure Modes For I-Section Gfrp Beams, Mamadou Konate, Zia Razzaq
Failure Modes For I-Section Gfrp Beams, Mamadou Konate, Zia Razzaq
Civil & Environmental Engineering Faculty Publications
This paper presents calculations for the failure modes for I-section Glass Fiber Reinforced Polymer (GFRP) beams with single mid-span web brace. Theoretical predictions are made using ASCE-LFRD Pre-Standard for FRP structures. For the member length considered, it is found that for small and medium I-sections the failure mode is governed by lateral-torsional buckling and for bigger I-sections the failure mode is governed by material rupture. The outcome of the predicted lateral-torsional buckling mode is compared with that observed experimentally.
Physical Impact Of Waterjet-Based Sediment Remediation On Benthic Organisms, Grace Harper, Andrew Curtis Elmore, Christopher Redell, Gavin Risley, Joel Gerard Burken
Physical Impact Of Waterjet-Based Sediment Remediation On Benthic Organisms, Grace Harper, Andrew Curtis Elmore, Christopher Redell, Gavin Risley, Joel Gerard Burken
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Adding Activated Carbon to Sediments Has Been Shown to Be an Effective Means of Reducing the Bioavailability of Certain Contaminants. the Current State of the Practice is to Mechanically Mix Activated Carbon to a Target Concentration of 3 Percent at Depths of Approximately 30 Cm using a Rotovator or Similar Construction Equipment. Waterjets Have Been Used to Cut Hard Material using a Mixture of Water and an Abrasive. If Activated Carbon is Substituted for the Abrasive, Waterjets Have the Potential to Use Surface Injection as a Replacement for Mechanical Mixing during Sediment Remediation. a Perceived Benefit of Waterjet-Based Sediment Remediation …
Development Of A Waterjet System For Direct Delivery Of Granular Iron And Activated Carbon To Remediate Contaminated Aqueous Sediments, Gavin H.R. Risley, Andrew Curtis Elmore, Joel Gerard Burken, Grzegorz (Greg) Galecki
Development Of A Waterjet System For Direct Delivery Of Granular Iron And Activated Carbon To Remediate Contaminated Aqueous Sediments, Gavin H.R. Risley, Andrew Curtis Elmore, Joel Gerard Burken, Grzegorz (Greg) Galecki
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
While the Techniques and Technologies Associated with Contaminated Sediment Remediation Are Relatively Mature, There Are Several Issues Associated with These Practices that Make Them Unattractive. the Inability of Currently Used Mechanical Mixing Implements to Place Amendments in Aqueous Environments and their Intrusive Behavior toward Benthic Communities Are Just Two Examples of a Necessity for an Improved Delivery Method. Waterjets May Be a Viable Option for Placement of Particulate Remediation Amendments, Such as Activated Carbon and Granular Iron, at Depth. a Custom Waterjet Nozzle and Injection System Has Been Fabricated by the Authors to Examine This Delivery Concept. the Developed Injection …
Thermal Effectiveness Characteristics Of Low Approach Indirect Evaporative Cooling Systems In Buildings, Ben Costelloe, Donal Finn
Thermal Effectiveness Characteristics Of Low Approach Indirect Evaporative Cooling Systems In Buildings, Ben Costelloe, Donal Finn
Articles
Meteorological enthalpy analysis of temperate and maritime climates above latitude 45°N suggests that the water-side evaporative cooling technique has considerable unrealised potential with contemporary “high temperature” building cooling systems—such as chilled ceilings and displacement ventilation. As low approach conditions are the key to exploiting the cooling potential of the ambient air, thermal performance at such conditions needs to be investigated. To address the research issues, an industrial scale test rig, based on a low approach open cooling tower and plate heat exchanger and designed to maximise evaporative cooling potential, has been constructed. The thermal effectiveness of such systems (as a …
Experimental Energy Performance Of Open Cooling Towers Used Under Low And Variable Approach Conditions For Indirect Evaporative Cooling Of Buildings, Ben Costelloe, Donal Finn
Experimental Energy Performance Of Open Cooling Towers Used Under Low And Variable Approach Conditions For Indirect Evaporative Cooling Of Buildings, Ben Costelloe, Donal Finn
Articles
The success of chilled ceilings and displacement ventilation systems as a means of sensible cooling in buildings has prompted a review of evaporative cooling technology as an effective means of generating the required cooling water. When such cooling water is generated at low approach conditions (2–5 K), at the higher temperatures required in these systems (14–18°C), very high levels of availability result. In many north western European locations the levels of availability are such that the prospect of supplanting rather than simply supplementing the refrigeration system, for sensible cooling purposes, arises. The viability of the technique, however, largely depends on …
Indirect Evaporative Cooling Potential In Air-Water Systems In Temperate Climates, Ben Costelloe, Donal Finn
Indirect Evaporative Cooling Potential In Air-Water Systems In Temperate Climates, Ben Costelloe, Donal Finn
Articles
Recent developments have prompted a review of evaporative cooling technology as an effective means of cooling modern deep plan buildings. Prominent among these developments is the success of high temperature sensible cooling systems, particularly, chilled ceilings, which require a supply of cooling water at 14–18 °C. Crucial to the success of evaporative cooling technology, as a significant means of cooling in modern applications, is the ability to generate cooling water, in an indirect circuit, at a temperature which closely approaches the ambient adiabatic saturation temperature (AST) or wet bulb temperature (WBT). Recent experimental research has demonstrated that it is technically …
Assessment Of Environmental Implications Of Abandoned Oil And Gas Wells, Donald L. Warner, Cary L. Mcconnell
Assessment Of Environmental Implications Of Abandoned Oil And Gas Wells, Donald L. Warner, Cary L. Mcconnell
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
A detailed study was made of the potential for abandoned oil and gas wells in the Lower Tuscaloosa sand of Mississippi and Louisiana to act as conduits for movement of saline water from the Lower Tuscaloosa into underground sources of drinking water (USDW's). Finite-difference numerical modeling determined the extent that water might be forced from the Lower Tuscaloosa sand into a USDW as a result of injection into the Lower Tuscaloosa. Within the range of conditions modeled, water from the Lower Tuscaloosa never traveled into a USDW. On the basis of the modeling, we concluded that it is unlikely that …
Geotechnical Evaluation Of The Support Of Coal Pillars In Underground Coal Mines., John D. Rockaway, Richard W. Stephenson
Geotechnical Evaluation Of The Support Of Coal Pillars In Underground Coal Mines., John D. Rockaway, Richard W. Stephenson
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
The Study Described Was Accomplished through an Investigation of Both the Intact and Insitu Geotechnical Properties of the Sub coal Strata and through the Installation of Floor Movement Monitoring Instrumentation. the Method of Bearing Capacity Analysis Developed by A. S. Vesic Was Used to Define Pillar Stability. This Method Includes Provisions for Taking into Consideration a Two-Layer System Such as Assumed for Mine Conditions Where a Weak Underclay overlies Firmer Strata.
Sufficiency Conditions For Constrained Optima, Ju-Chang Huang, Robert M. Wellek
Sufficiency Conditions For Constrained Optima, Ju-Chang Huang, Robert M. Wellek
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Sufficiency conditions for constrained optimization problems were derived by the use of constrained second total derivatives. The results are in a simpler form than the Schechter and Beveridge relation. The sufficiency conditions of Phipps were corrected. © 1971, American Chemical Society. All rights reserved.