Architecture Commons^™

Mechanical Connection For Concrete Structures, George Morcous, Raed Tawadrous

Durham School of Architectural Engineering and Construction: Faculty Publications

A system and method for connecting precast concrete structures includes anchoring a sleeve within a pocket formed in one of the concrete structures , and placing the concrete structures in contact with one another such that the pocket is diposed around a protruding end of a shear connector embedded in the other concrete structure . A bridge is inserted around the protruding end of the shear connector and a fastener is installed onto the protruding end of the shear connector to engage the bridge and urge the bridge in abutting relation with a lip of the sleeve . The pocket …

Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …

Centres Of Excellence And Roadmaps For Digital Transition: Lessons For Ireland’S Construction Industry, Barry Mcauley, Alan Hore, Roger West

Conference papers

Like most sectors in today’s working world, construction businesses are challenged to work in an increasingly digitised world with sophisticated demands from intelligent clients. So much has been written about the inefficiencies of the construction industry, its fragmentation, lack of collaboration, low margins, adversarial pricing, poor productivity, financial fragility, lack of research and development, poor industry image and relatively weak use of digital solutions. The Irish government recognises the importance of digital innovation to address many of the challenges the construction industry faces. With recent high profile reports of escalating spend on signature public sector projects and weak productivity performance …

Bim In Ireland 2019: A Study Of Bim Maturity And Diffusion In Ireland, Barry Mcauley, Alan Hore, Roger West

Conference papers

In 2017, the BIM Innovation Capability Programme team applied five macro BIM maturity conceptual models to capture the capability of the Irish construction industry and assess its BIM maturity. The results found that while Ireland is mature for modelling processes, it is less developed with regards to collaboration processes and policies. Ireland also ranked poorly when it came to regulatory frameworks, measurements and benchmarks compared to a number of countries which also applied the same conceptual models. At the time, the findings highlighted that Ireland’s diffusion dynamic was middle out, meaning that larger organisations or industry associations were pushing the …

An Investigation Into Current Procurement Strategies That Promote Collaboration Through Early Contractor Involvement With Regards To Their Suitability For Irish Public Work Projects, Barry Mcauley, Frederic Lefebvre

Conference papers

Previous research has established that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. While Lean Construction, Building Information Modelling (BIM), and Integrated Project Delivery (IPD) can all be viewed as separate processes which add independent value to a project, they are more effective when used in partnership with each other. In order to ensure the high levels of collaboration expected for these processes to work in unison, the early involvement of the Contractor is paramount. Early contractor involvement within the design process can ensure a more focused integrated project team, improvement of both constructability and cost certainty, as …

From Roadmap To Implementation: Lessons For Ireland’S Digital Construction Programme, Barry Mcauley, Alan Hore, Roger West

Conference papers

As part of their Future of Construction initiative in 2018 the World Economic Forum published an action plan to accelerate Building Information Modelling adoption. The WEF report highlighted actions that companies, industry organisations and governments are advised to implement to accelerate BIM adoption and better capitalise on delivering better project outcomes. According the authors of the report BIM is seen as the centrepiece of the construction industry’s digital transformation, however they acknowledged that BIM adoption globally remain slow. Anecdotal experience would suggest that BIM usage in Ireland is also very low and that a similar initiative or an adaptation of …

Quantification Of Heat Flows Through Building Entrance Doors On A Winter Day, Daeho Kang

Publications and Research

The current methods for the prediction of the heat flow through building entrance doors have been used for years while involved with a certain degree of uncertainty. This paper describes an experimental method that accurately quantified such heat flow. The experiment monitored local environmental parameters in a college building on a cold winter day. The results of the experiment demonstrated that the experimental method is viable to accurately estimate the heat flow throughout the entrance doors and the presence of a vestibule moderated heat losses from the conditioned area. The results will be used for validating the existing methods.

Competence Of A Spray Passive Down-Draft Evaporative Cooling (Pdec) System For Space Cooling, Daeho Kang, Richard K. Strand

Publications and Research

A spray PDEC system has been relatively less considered than other passive cooling strategies as one of the viable low-energy solutions in the cooling of buildings while having a great potential in energy savings. This study is intended to evaluate the capability of a spray PDEC system for space cooling. It comprises four simulation scenarios to see the system response and influence of indoor thermal environment when a spray PDEC system is adopted as a primary cooling system in two different climates. The simulation results show that a spray PDEC system causes a substantial variation in the indoor thermal environment …

Feasibility Of A Fiber Reinforced Polymer Retrofit For Non-Ductile Concrete Walls, Rory S. De Sevilla, Jerry Hue Truong Luong, Anahid A. Behrouzi, Peter T. Laursen, Mike J. Deigert

Architectural Engineering

A significant number of pre-1980’s non-ductile reinforced concrete (RC) structures in California have been identified as deficient, many of which utilize RC shear wall systems to resist earthquake lateral forces. These non-ductile wall systems are typically lightly reinforced and lack adequate boundary element detailing. Engineers suspect these walls to susceptible to brittle, compression-controlled failure modes due to damage from concrete crushing and bar buckling. As a result, one approach designers are taking is to seek fiber reinforced polymer (FRP) retrofit solutions that improve the compression capacity of high-stressed wall end zone regions based on effectiveness of these approaches with columns. …

Workforce Development Through Online Experiential Learning For Stem Education, Arefeh Mohammadi, Kevin Grosskopf, John Killingsworth

Durham School of Architectural Engineering and Construction: Faculty Publications

The U.S. workforce is increasingly comprised of older adults, women, and minorities who lack basic skills and are unable to acquire these skills through traditional educational and training programs. New approaches are needed to provide effective training to the adult learner and flexible support for nontraditional students who must balance work-life demands with limited educational opportunities. Contextualized teaching and learning (CTL) is a form of experiential learning that blends both basic skills and occupational training together in environments that allow students to relate subject matter to real-world situations. Virtual CTL environments can be created to better engage students, provide immediate …

Development Of A Framework To Support The Effective Adoption Of Bim In The Public Sector: Lessons For Ireland, Shiyao Kuang, Alan Hore, Barry Mcauley, Roger West

Conference papers

Building Information Modelling (BIM) has been formally adopted by many countries with the promise of creating greater economic, social and sustainability benefits. Several authors and institutions have presented alternative BIM policies and tactics which have been adopted by developed countries. However, there is evidence to indicate that BIM adoption theories are not well established and, in particular, the linkage between BIM public sector adoption strategy outcomes and their contribution to achieving Government policy objectives are underdeveloped. This paper will present the outcome of the first phase of a systematic literature review of published studies (including journal papers and noteworthy international …

Diversity, Inclusion And The Exceed Teaching Workshop, Allen C. Estes

Architectural Engineering

The American Society of Civil Engineers (ASCE) Excellence in Civil Engineering Education (ExCEEd) Teaching Workshops are currently in their 20th year of existence and have been highly successful. There is a growing body of literature on creating a multi-cultural classroom that celebrates diversity, accounts for the global differences and experiences of students, and deliberately fosters inclusivity. This paper examines the content of the existing culturally inclusive literature and quantifies how much is already present in the current ETW curriculum. It then suggests how much more could be included if a deliberate effort is made to include diversity and inclusivity into …

E-Learning Tools To Facilitate Instruction Of A Large Enrollment Structural Engineering Course, Maelle Van Thienen, James Boon Piang Lim, Anahid A. Behrouzi, Pablo Garcia, Wyatt Banker-Hix

Architectural Engineering

A significant challenge in teaching large civil engineering courses is engaging and providing feedback to students in a meaningful and timely manner. This paper presents a solution that uses e-learning tool Xorro-Q in the successful instruction of a Structures II course of 250+ second year students since 2016 at a research-intensive university in New Zealand.

During the course, Xorro-Q has been utilized as an online practice-based learning tool where students can repeat questions without penalty and automatically receive detailed instructor-developed feedback (diagrams, text, or link to website/video) in response to specific incorrect answers. Additionally, Xorro-Q permits a variety of questions …

Exposing Undergraduates To Design, Fabrication, And Large-Scale Experimentation In A Structural Steel Design Course, Jenna Williams, Mark William Wright, Michael James Deigert, Anahid A. Behrouzi

Architectural Engineering

During Fall 2017, Spring and Fall 2018 quarters, various hands-on design, fabrication, and large-scale experimental projects were incorporated into a 10-week undergraduate structural steel design course offered in the Department of Architectural Engineering at California Polytechnic State University – San Luis Obispo. Through these projects students investigated one or two unique steel lateral force resisting systems (LFRS) consisting of either: special moment frame (SMF), special concentric braced frame (SCBF), and/or buckling restrained braced frame (BRBF). Students completed design calculations per the American Institute of Steel Construction steel building and seismic codes, visualized their final design using AutoCAD software, constructed and …

Interactive Physical Experiments In An Advanced Undergraduate Structural Dynamics Course, Charles D. Facciolo, Anahid A. Behrouzi

Architectural Engineering

This paper describes a number of physical models and hands-on lab activities incorporated in an advanced undergraduate structural dynamics lecture and laboratory course pairing offered within the Architectural Engineering department at California Polytechnic State University – San Luis Obispo. These course modifications were designed and implemented in the Winter 2018 quarter to enable students to:

-Collect acceleration data during free or forced vibration tests using a smartphone accelerometer application to generate data plots in Matlab; -Conduct free vibration tests on various single-degree of freedom (SDOF) systems to investigate effects of varying mass, stiffness/height, material type, and damping type (pendulum or …

Analysis Of The System Response Of A Spray Passive Downdraft Evaporative Cooling System, Daeho Kang, Richard K. Strand

Publications and Research

A spray Passive Downdraft Evaporative Cooling (PDEC) system achieves great savings for space cooling and improves indoor environmental quality by supplying a large amount of fresh outdoor air. As previous studies heavily focused on the energy saving capability of a spray PDEC system due to lack of methods for a detailed analysis, the influence of cool humid supply air from a spray PDEC system in a space in buildings has not been comprehensively studied. This study is intended to evaluate the competence of a spray PDEC system as a primary cooling system in typical spaces in a primary school building …

Incentivising Multidisciplinary Teams With New Methods Of Procurement Using Bim + Blockchain​, Alan O'Reilly, Malachy Mathews

Conference papers

This paper researches a potential method of incentivising AEC industry professionals to design to better than NZEB standards. Analysing the potential of a purposefully designed local microgrid storing excess energy generated by solar technologies embedded within the building envelope; the microgrid excess output is measured and recorded using a (Post Occupancy) “Blockchain” application and measured against the data provided at design stage on a (Predictive) “Blockchain” database. This paper researches how energy output predictions at design stage, by multidisciplinary teams, may be enhanced by BIM + Blockchain Technology. The paper researches the potential of a digital twin (predictive versus post …

Idea, Form, Reality – The Implications Of Natural Ventilation Strategies On Public Buildings In Temperate Maritime Climates, Michael P.G. Haslam

Masters

Natural ventilation is one of the prime form givers in environmentally responsive architecture – in its detail and its architecturally charged form of stacks and voids. It facilitates our understanding of a response to natural systems – not just in how it responds visually to warm and cool air but also in the adaptive approach to thermal comfort. The purpose of this research is to investigate the impacts and implications of natural ventilation strategies for different typologies of public and commercial buildings. This is with the aim of attempting to define a vocabulary of ventilation techniques and details that are …

Automated Generation Of Daily Evacuation Paths In 4d Bim, Kyungki Kim, Yong-Cheol Lee

Durham School of Architectural Engineering and Construction: Faculty Publications

Spatial movements of workers and equipment should be carefully planned according to project plans. In particular, it is crucial for workers’ safety to prepare emergency evacuation paths according to changing construction site configurations and construction progress. However, creating evacuation paths for all crews for each day can be an extremely labor-intensive task if it is done manually. Consequently, in most construction projects, evacuation plans are not provided to managers and crews throughout the entire construction. Even state-of-the-art technologies do not suggest ways to generate evacuation paths according to changing progresses presented in 4-Dimensional Building Information Model (4D BIM). This research …

Explorations Of Acoustic Trends In Data Logged In K-12 Classrooms, Kieren Smith

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

The classroom environment influences the ability of children to learn. To ascertain the effect of indoor environment parameters on student achievement, a large-scale project was launched, collecting time-logged data from 220 k-12 classrooms in the eastern Nebraska region for six days each. Data were collected from a variety of disciplines, including acoustics, lighting, indoor air quality, and thermal comfort. This thesis focuses on the acoustic parameters, looking first at how overall classroom values--including average sound levels and room reverberation time--influence student achievement. Using structural equation modeling, the average sound level during times with speech present was discovered to have a …

Measuring Element (31) External Walls Completion. An Introductory Demonstration, Tony Cunningham

Other Resources

This demonstration is addressed to Irish students taking measurement or quantities modules at first year or entry level of quantity surveying related programmes.

The worked example has been carried out using traditional handwritten quantity surveying processes on traditional dimension paper. It is acknowledged that, in actual practice, this would be carried out using measurement software or on-screen measurement technology. The traditional handwritten approach, however, has been retained in order to enable novice students to develop the necessary measurement skills and build confidence through direct contact with drawings and written taking off processes. In addition the presentation illustrates how the work …

Post-Earthquake Assessment And Numerical Modeling Of Freestanding Heritage Structures, M. Khalid Saifullah, Christine E. Wittich

Department of Civil and Environmental Engineering: Faculty Publications

Historic and heritage structures are particularly vulnerable to earthquakes, where damage or collapse can not only lead to loss of a structure but also the loss of irreplaceable heritage. Many heritage structures can be classified as freestanding (detached) structures, including unreinforced masonry walls, classical multi-drum columns, and statue-pedestal systems. However, the seismic response of freestanding structures (sliding, rocking, rock-slide, overturning) is poorly predicted by existing methods due to geometric non-linearities as well as sensitivity to interface conditions and modeling parameters. Previous studies have focused on analytical modeling of simplified systems and/or experimentation under controlled laboratory conditions. In contrast, this paper …

Ua1c2/17 Cravens Graduate Center & Library Photos, Wku Archives

WKU Archives Collection Inventories

Images of the Cravens Graduate Center & Library.

Ua1c2/2 Academic Complex Photos, Wku Archives

WKU Archives Collection Inventories

Images of the Academic Complex.

Ua1c2/23 East Hall Photos, Wku Archives

WKU Archives Collection Inventories

Images of the East Hall.

Ua1c2/27 Environmental Sciences & Technology Building Photos, Wku Archives

WKU Archives Collection Inventories

Images of the Environmental Sciences & Technology building.

Efficient Excitation Of Micro/Nano Resonators And Their Higher Order Modes, N. Jaber, M. A. A. Hafiz, S. N. R. Kazmi, M. H. Hasan, F. Alsaleem, S. Ilyas, M. I. Younis

Durham School of Architectural Engineering and Construction: Faculty Publications

We demonstrate a simple and flexible technique to efficiently activate micro/nano-electromechanical systems (MEMS/NEMS) resonators at their fundamental and higher order vibration modes. The method is based on the utilization of the amplified voltage across an inductor, L, of an LC tank resonant circuit to actuate the MEMS/NEMS resonator. By matching the electrical and mechanical resonances, significant amplitude amplification is reported across the resonators terminals. We show experimentally amplitude amplification up to twelve times, which is demonstrated to efficiently excite several vibration modes of a microplate MEMS resonator and the fundamental mode of a NEMS resonator.

Voltage And Deflection Amplification Via Double Resonance Excitation In A Cantilever Microstructure, Mohammad H. Hasan, Fadi Alsaleem, Abdallah Ramini

Durham School of Architectural Engineering and Construction: Faculty Publications

Cantilever electrostatically-actuated resonators show great promise in sensing and actuating applications. However, the electrostatic actuation suffers from high-voltage actuation requirements and high noise low-amplitude signal-outputs which limit its applications. Here, we introduce a mixed-frequency signal for a cantilever-based resonator that triggers its mechanical and electrical resonances simultaneously, to overcome these limitations. A single linear RLC circuit cannot completely capture the response of the resonator under double resonance excitation. Therefore, we develop a coupled mechanical and electrical mathematical linearized model at different operation frequencies and validate this model experimentally. The double-resonance excitation results in a 21 times amplification of the voltage …

Experiencing Extreme Height For The First Time: The Influence Of Height, Self-Judgment Of Fear And A Moving Structural Beam On The Heart Rate And Postural Sway During The Quiet Stance, Mahmoud Habibnezhad, Jay Puckett, M. S. Fardhosseini, Houtan Jebelli, Terry Stentz, L. A. Pratama

Durham School of Architectural Engineering and Construction: Faculty Publications

Falling from elevated surfaces is the main cause of death and injury at construction sites. Based on the Bureau of Labor Statistics (BLS) reports, an average of nearly three workers per day suffer fatal injuries from falling. Studies show that postural instability is the foremost cause of this disproportional falling rate. To study what affects the postural stability of construction workers, we conducted a series of experiments in the virtual reality (VR). Twelve healthy adults—all students at the University of Nebraska-Lincoln—were recruited for this study. During each trial, participants’ heart rates and postural sways were measured as the dependent factors. …

Skip This Chore: Cleaning Your Air Conditioner Condenser Probably Won't Make It Work Better, David Yuill

Durham School of Architectural Engineering and Construction: Faculty Publications

I asked my neighbor who hoses off his air conditioner condenser every spring why he does it. “Because my dad always told me I had to,” he said.

Conventional wisdom like what my neighbor’s dad imparted may always seem right. But through my HVAC scholarship – the study of heating, ventilation and air-conditioning systems – I’ve learned that this particular presumption is probably wrong.