Open Access. Powered by Scholars. Published by Universities.®
Articles 31 - 46 of 46
Full-Text Articles in Entire DC Network
Ddasaccident677, Hd-Aid
Ddasaccident677, Hd-Aid
Global CWD Repository
According to the preliminary investigation the incident happened due to individual mistake while the deminer trying to recover an invisible mine and to prevent like incident in the future all invisible Mines would be investigated using the metal detector.
Ddasaccident622, Hd-Aid
Ddasaccident622, Hd-Aid
Global CWD Repository
According to the preliminary investigation the incident is caused due an individual mistake that the deminer according to the SOP have to use first off all the Light RAKE to investigate the signal), then if there is a need to use the heavy RAKE he have to approach it 15 cm from the side and 15 cm from the front with a 15 cm depth (which was not followed properly) and instead of that he hack the mine from the centre of the signal.
Ddasaccident608, Hd-Aid
Ddasaccident608, Hd-Aid
Global CWD Repository
According to the preliminary investigation the incident is caused due to a pressure applied to the mine from the heavy RAKE (the excavation tool) used by the deminer and the deminer didn’t expect to find a mine in that spot with that depth and may like accident could be avoided by using the metal detector to locate the non visible mine before using the standard RAKE drill.
Ddasaccident602, Hd-Aid
Ddasaccident602, Hd-Aid
Global CWD Repository
While the deminer trying to recover an AP M14 mine using the heavy RAKE he applied a pressure in the pressure plate of a non visible M14 which in turn activated that mine in a depth of about 5-7 cm
Ddasaccident647, Hd-Aid
Ddasaccident647, Hd-Aid
Global CWD Repository
According to the preliminary investigation the incident is caused due to a pressure applied to the mine from the heavy RAKE (the excavation tool) used by the deminer and the deminer didn’t expect to find a mine in that spot with that depth and may like accident could be avoided by using the metal detector to locate the non visible mine before using the standard RAKE drill.
Ddasaccident617, Hd-Aid
Ddasaccident617, Hd-Aid
Global CWD Repository
According to the preliminary investigation the incident is caused due to a pressure applied to the mine from the heavy RAKE (the excavation tool) used by the deminer and the deminer didn’t expect to find a mine in that spot with that depth and may like accident could be avoided by using the metal detector to locate the non visible mine before using the standard RAKE drill.
Ddasaccident637, Hd-Aid
Ddasaccident637, Hd-Aid
Global CWD Repository
The incident involved [the Victim] detonating an anti-personnel mine whilst excavating a contact. The investigation report is to be submitted by 18 December 2008. In the event that the completed report is not able to be submitted on the date indicated an interim report outlining progress with the investigation and the reason for the delay is to be submitted on that date and further interim reports provided every (two) days until the completed investigation report is submitted.
Ddasaccident662, Hd-Aid
Ddasaccident662, Hd-Aid
Global CWD Repository
While I was checking on deminers I saw the deminer [Name removed] working on his group on 12 o’clock mine I asked him what’s the problem? He said he was looking for a missing mine and he can’t find it, I went to help him and when I dig twice using the heavy rake a mine was blasted in my face, I sat on the ground and the deminer, team leader and the team section came and took me to the medic team on the ambulance stretcher out of the field.
Ddasaccident584, Hd-Aid
Ddasaccident584, Hd-Aid
Global CWD Repository
The deminer was working within the Site Preparation Stage to identify the centre of the mine line and an IOE was already identified and recovered the expected mines about 15m to our side from the mine centre line which already quality up to the assigned depth (15cm) and all the mines recovered from the site were a surface mines and when the deminer trying to bring out some stones he stepped on un expected mine in the site with the heel.
Ddasaccident579, Hd-Aid
Ddasaccident579, Hd-Aid
Global CWD Repository
The deminer was doing clearance around an accident site where an AP mine blew off the tire of a car on the 23rd November. The soil in the area is hard and there are lots of metal pieces in the ground. The mine was detonated by the deminer during excavation most likely due to incorrect procedures. The blast went through a gap between the visor and the vest and caused injuries to the deminers face. Also the thumb on his right hand received injuries. The leather gloves the deminer was wearing saved him from worse injuries.
Ddasaccident311, Hd-Aid
Ddasaccident311, Hd-Aid
Global CWD Repository
The victim was conducting a “full-excavation” drill wearing a protective vest (RBR), a full-face visor with headband, and gloves. He was using a gardening tool/hand trowel and as he worked, he activated an M14 mine with the trowel.
Ddasaccident159, Hd-Aid
Ddasaccident159, Hd-Aid
Global CWD Repository
At the time of the accident, Victim No.1 was excavating a detector reading. Victim No.2 was the detector man and had paused on his return to the safe area because he felt unwell and so had not left the vicinity when the mine initiated. Victim No.1 was excavating with a "trowel" [a locally made excavating tool] (after prodding) when (at 10:40) he initiated a mine. He had been a deminer for 13 months.
Ddasaccident161, Hd-Aid
Ddasaccident161, Hd-Aid
Global CWD Repository
The victim said that he did not find anything at the first marker, and then failed to find anything at the second marker with his prodder. He called his partner to check with the detector again and the reading was confirmed. He then started excavating with his "trowel" when the mine exploded. He estimated that the mine was buried to a depth of 4cm, but did not see it prior to the explosion.
Ddasaccident081, Hd-Aid
Ddasaccident081, Hd-Aid
Global CWD Repository
The victim prodded onto a mine at 07:55. There was a 45cm gap between the accident site and the "recognised face of clearance", indicating that the victim was prodding ahead of his end of lane marker. It was difficult to determine whether the victim had prodded the ground up to the site of the explosion
Ddasaccident192, Hd-Aid
Ddasaccident192, Hd-Aid
Global CWD Repository
The investigators concluded that SOPs were not broken and the Section Commander fell because the stick broke. The report noted that he was wearing his safety spectacles, and that they probably saved his eyes.
Ddasaccident193, Hd-Aid
Ddasaccident193, Hd-Aid
Global CWD Repository
The weather at the time of the accident was "sunny, clear, slight breeze and 85ºF". The victim was walking along the Safe Lane carrying a radio and notebook and thinking when he walked into a small tree. Two small trees (5cm stem thickness) blocked about 1/3 of the Safe Lane at the place. He stumbled sideways and was not able to hold the tree for support. He placed his foot "10-15"cm outside the Safe Lane and detonated a mine at 12:45. The Safe Lane marking tape survived the blast.