Digital Commons Network^™

A Cfd Study Of Operation Room Air Conditioning: Air Curtain Performance, Spencer Lee Boer

Masters Theses

An operation room is a critical environment when it comes to the safety of patients undergoing surgery. There are a lot of factors that go into reducing Surgical Site Infections (SSI) following a surgery. This comes in the form of cleaning standards, surgical practices, but also environment controls. The characteristics of airflow within an operation room are related to the risk of an SSI. Some of these factors are temperature, velocity, and turbulent air around an open wound which could increase the chance of bacteria or other particles entering the very vulnerable patient. As clean room standards continue to be …

Biaxial Behavior And Design Of Steel-Concrete Composite Columns, Amirfarzad Behnam

Masters Theses

Steel-concrete composite columns are efficient structural members that possess significant strength, stiffness, and ductility. Accurate methods of assessing the strength of these members are necessary to realize their benefits. Several design codes rely on the plastic stress distribution method (PSD) for computing the cross-sectional strength of composite columns subjected to axial compression and flexural bending. However, there has been limited validation of this method over the wide range of material and geometric properties and loading conditions to which it is permitted to be applied. The first part of this thesis presents a study of the behavior of short composite columns …

High-Resolution Timeseries Analysis Of Dynamic Geochemistry: A 27-Well Survey Of Contaminated Groundwater Downstream Of The Former S-3 Ponds, Oak Ridge, Tennessee, Emma Dixon

Masters Theses

Spatiotemporal variability of geochemistry of contaminated groundwater has large implications on overall water quality and ability to respond to remedial applications. Gaining knowledge of how geochemistry changes over time in an area can help establish response trends to changing external conditions like weather and level of contamination. In this study, a spatiotemporal survey was performed on 27 wells at the Y-12 Complex in Oak Ridge, Tennessee. This was completed to measure diurnal fluxes in geochemistry from seasonal changes and extreme weather conditions in three areas of historically different contamination levels from a single point contamination source. Measurements were gathered over …

Lagrangian Bedload Movement Prediction Using The Virtual Velocity Approach, Theodoros Kyriakopoulos

Masters Theses

The advances in particle tracking codes in the recent years has made possible to track the intermittent movement of a large number of sediment particles with precision and in an automated way. The present study used this technique to study the velocity of the particle while it is in motion, the length it travels once it gets mobilized until it deposits, and the time it rests once deposited until it gets mobilized again. New modeling equations were developed to predict these quantities for a wide range of flow conditions and sediment sizes. These equations were combined to predict the virtual …

Improving Stream Bank Erosion Estimates By Adjusting The Applied Shear Stress For Different Bank Characteristics, Justin Condon

Masters Theses

Stream bank erosion rates are commonly modeled using the excess shear stress equation ε_r = k_d(τ-τ_c)^a, where the exponent a is assumed to be unity. The coefficient of erodibility k_d, and the critical shear stress τ_c [Tau _c] are properties of the bank soil and the applied shear stress τ [Tau] is a function of the channel geometry and discharge. This equation appears to overstimate bank erosion likely due to effects of channel morphology and bank vegetation, among other factors. The objective of this study was to determine whether …

School Bus Routing To Allow Later School Start Times, Rana Eslamifard

Masters Theses

School districts providing busing services for students who live too far to walk to school. In many districts a fleet of school buses is used in sequence to transport high school students, then middle school students, and then elementary school students. The result is that high school classes must start much earlier in the morning than the elementary school, and buses may traverse similar routes three times each morning and afternoon. In light of recent research on the benefits of later high school start times and the need to control transportation costs, school districts are seeking efficient school bus routing …

Modeling Of Electrical Grid Systems To Evaluate Sustainable Electricity Generation In Pakistan, Muhammad Mustafa Amjad

Masters Theses

Pakistan has always had a history of severe energy shortfalls, which rose up to an alarming 33% in 2013. This situation was countered by investments in the energy sector through the China Pakistan Economic Corridor (CPEC), which were unfortunately largely based on brown fuels. Although beneficial in the short term, these investments do not bode well for the climate scenario of Pakistan, with various parts of the country already having experienced temperatures rise of 1-3°C. To ensure that the current situation doesn’t exacerbate and is tackled in a timely manner, this research aims to examine how the untapped potential of …

Numerical Performance Evaluation Of The Wooden Frame Structures With Adhesive Applied Connection Under Wind And Seismic Loading, Sharthak Bhandary

Masters Theses

The objective of the research is divided into two folds. The first objective is to study the state-of-the-art modeling method for the wooden frame construction, while the second objective is to evaluate the performance of a wooden frame structure with construction adhesives under hazardous loading conditions using the selected numerical modeling method. The numerical modeling tools were classified under academic and commercial categories based on the purpose of their development. Both academic and commercial tools were further classified based on model types of the structural systems (i.e., shear walls and three-dimensional (3D) buildings) and the applied loads (i.e., wind loading …

Quantification Of Thermal Bridging Effects In Cold-Formed Steel Wall Assemblies, Divyansh Kapoor

Masters Theses

Thermal bridging can be defined as the phenomenon where a structural element spanning the building envelope acts like a thermal pathway which collects and moves energy (heat) from the interior to the exterior of the structure. CFS construction, due to the high thermal conductivity of steel with respect to its surrounding structural components and repetitive nature of framing, is highly prone to thermal bridging. Thermal bridging significantly alters the thermal performance of wall assemblies.

Hence, the objective of this research project was to quantify the magnitude of energy loss through cold-formed steel (CFS) stud wall assemblies at a component level …

Vehicle Performance Analysis Of An Autonomous Electric Shuttle Modified For Wheelchair Accessibility, Johan Fanas Rojas

Masters Theses

Autonomous vehicles (AV) have the potential to vastly improve independent, safe, and cost-effective mobility options for individuals with disabilities. However, accessibility considerations are often overlooked in the early stages of design, resulting in AVs that are inaccessible to people with disabilities. The needs of wheeled mobility device users can cause significant vehicle design changes due to requirements for stepless ingress/egress and increased space for onboard circulation and securement. Vehicles serving people with disabilities typically require costly aftermarket modifications for accessibility, which may have unforeseen impacts on vehicle performance and safety, particularly in the case of automated vehicles. In this research, …

3d Printing Reinforced Concrete Structures, Bryce Tyler Tafolla

Masters Theses

"This study aims to investigate a 3D printing method to directly incorporate continuous reinforcement into concrete structures. The ability to design and produce complex structures with optimized topographical configuration can be used to reduce potential material waste while maintaining the required structural strength. Furthermore, the ability to actively incorporate reinforcement into printed members substantially reduces potential labor requirements and eliminates the need to set up formwork.

The study began its initial approach with a manual extrusion process containing reinforcement to observe the necessary constraints required to achieve a printing system with this functionality. The second stage of development was designing …

Optical Fiber Based Integrity Test Of Civil Engineering Materials: Numerical Analysis, Ruoyu Zhong

Masters Theses

“Major advancement in Civil Engineering cannot be accomplished without the help of sensors. Among different types of sensors, fiber-optic sensor is known for its light weight, high accuracy, resolution, immunity to electromagnetic interference, and resistance to harsh environment. This research mainly focuses on fiber-optic sensor application on concrete structures as temperature sensor. Thermal Integrity Profiling (TIP) is a non-destructive integrity testing method which makes use of the hydration heat from the concrete curing process to detect defects within a drilled shaft. Any defect of concrete could result in a temperature anomaly in a drilled shaft. The accuracy of the current …

Development Of Amine-Functionalized Mesoporous Alumina For Radioiodine Removal From Water, Mansour Mohammed Alsalbokh

Masters Theses

“Radioactive materials have spread due to careless disposal and nuclear disasters. Some radionuclides can exist in an aqueous media, like radioactive iodine. As a result, in this work amine-functionalized mesoporous alumina was developed to adsorb radioactive iodine from the liquid phase. Bismuth was incorporated, using a wet impregnation method, to test it as a possible silver replacement. Amine grafting was used to functionalize the surface of the mesoporous alumina. All materials prepared in this work were characterized by N₂ physisorption, FTIR and TGA to determine the textural properties, surface functionality, and amine loading. The synthesized materials were tested for …

Soil-Water-Energy Nexus Of Green Roofs, Katherine Ann Bartels

Masters Theses

"As the urban landscape continues to sprawl into previously undeveloped land to accommodate population growth, the need to design cities that effectively manage urban stormwater is imperative for a sustainable future. Green roofs use rain-harvesting techniques to reduce urban stormwater discharge while simultaneously providing traditional roof services as well as several ecosystem services. However, green roof media design varies greatly among commercial applications, and little guidance is available to engineers when selecting the media for prospective green roofs. Efforts to maximize stormwater retention and enhance urban heat island mitigation capabilities of green roofs while concurrently reducing nutrient loading were examined …

Experimental Evaluation Of A Honeycomb Structure In Open Channel Flows, Kyle David Hix

Masters Theses

“Designing and controlling open channel flows presents many challenges. One such challenge is energy dissipation. This challenge is currently addressed by several means, including the use of honeycomb structures. Energy dissipation by honeycomb structures has been studied for pressurized conduit flows; however, their ability to dissipate energy in free-surface flows remains largely unexamined. This work introduces a comprehensive experimental study designed to estimate the energy dissipation through a honeycomb structure in a free-surface flow.

This work examined the energy dissipation for a range of flows, pipe lengths, and pipe diameters in two flumes. PVC pipes ranging from 6 inches to …

Feasibility Study On Novel Fire-Resistant Coating Materials, Anyou Zhu

Masters Theses

“Over the past decades, wildfires in the United States have caused severe damage and property losses. The California Camp Fire in November 2018 caused 85 civilian fatalities and destroyed 18,793 structures. There is a need to enhance the fire resistance of structures and buildings. The primary purpose of this study was to develop innovative surface-bonded fire-resistant material that can be used as a wall coating with three primary features: (a) workability for application, (b) enough adhesion to the surface of the structure, (c) fire-resistant. This research developed mix designs of innovative fire-resistant coating materials including high-performance cement mortar (HPCM), geopolymer …