Digital Commons Network^™

Performance Of Four Near Zero Energy Homes: Lessons Learned, Florida Solar Energy Center, Carlos Colon

FSEC Energy Research Center®

While the idea of a zero or near zero energy home is well understood, the actual performance of the structure can be different than expected. High performance homes necessitate increasingly complex envelope, HVAC, water heating, and appliance systems, and successful designs rely on proper function and feedback from those systems to achieve low-energy goals. This paper presents measured data on four near zero energy homes located in Florida that are a part of the U.S. DOE Building America program. The monitored data are compared to both a benchmark model and the prototype computer simulations. By examining the submetered energy data, …

Florida Weatherization Training - Quarterly Report (October 2010-December 2010), Florida Solar Energy Center, Neil Moyer

FSEC Energy Research Center®

The weatherization training for the State of Florida Dept of Community Affairs continues at the Florida Solar Energy Center's Training Facility. Progress for the sixth three months of the contract included a five day classroom training on October 18-22 (17 students) and in-field evaluations (16 students).

Tangerine Avenue Retrofitting Project, Ni-Bin Chang, Martin Wanielista

BMP Trains Research and Publications

No abstract provided.

Building America Industrialized Housing Partnership Case Studies - 2010, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

This document is a compilation of 14 separate case studies of home builders who have adopted Building America principles of high performance as standard construction. This work was compiled by the Building America Industrialized Housing Partnership (www.baihp.org ) for the U.S. Department of Energy to serve as a model for other housing providers. BAIHP is led by the Florida Solar Energy Center of the University of Central Florida.

Florida Weatherization Training - Quarterly Report (July 2010 - September 2010), Florida Solar Energy Center, Neil Moyer

FSEC Energy Research Center®

The weatherization training for the State of Florida Dept of Community Affairs continues at the Florida Solar Energy Center's Training Facility. Progress for the fifth three months of the contract included minor course refinement of presentation materials and handouts as the result of the June 2010 updates to the P & G . Four 1-day IR classes were completed (45 students).

Opportunities For Energy Conservation And Improved Comfort From Wind Washing Retrofits In Two-Story Homes - Part I, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

Wind washing is a general term referring to diminished thermal control caused by air movement over or through a thermal barrier. The primary focus of this paper is towards a specific type of wind washing where wind can push attic air into the floor cavity between first and second stories of the home through ineffective (or missing) air barriers separating attic space from the floor cavity. A second type of wind washing studied in this project involved insulation batts on knee walls where space between the batts and the wall board allowed air movement against the gypsum wall board. During …

Opportunities For Energy Conservation And Improved Comfort From Wind Washing Retrofits In Two-Story Homes - Part Ii, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

Wind washing is a general term referring to diminished thermal control caused by air movement partially or completely bypassing the thermal barrier. The primary focus of this paper relates to a specific type of wind washing where wind can push attic air into the floor cavity between first and second stories of the home through ineffective (or missing) air barriers separating attic space from the floor cavity. A second type of wind washing studied in this project involves insulation batts on knee walls where space between the batts and the wall board allow air movement against the gypsum wall board. …

Affiliate Steps Toward Building Energy Star Homes, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

To certify a home as an Energy Star, a builder works with a RESNET certified home energy rater to evaluate the home with respect to criteria required by the Energy Star program. The following steps will help Habitat affiliates navigate the path toward building Energy Star homes.

Pilot Evaluation Of Energy Savings And Persistence From Residential Energy Demand Feedback Devices In A Hot Climate, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

According to past studies, providing instantaneous feedback on household electrical demand has shown the promise to typically reduce energy consumption by 5-10%. This paper briefly reviews past research and describes a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida. Although not a statistical sample (the participants were self-selected and interested in reducing energy use), the study showed an average 7% reduction in energy use from feedback homes in the second year of monitoring after controlling for weather-related influences. However, a follow-up evaluation done three years later found little …

Exploring Cost-Effective, High Performance Residential Retrofits Foraffordable Housing In The Hot Humid Climate, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

In 2009, a Department of Energy Building America team led by the Florida Solar Energy Center began working with partners to find cost-effective paths for improving the energy performance of existing homes in the hot humid climate. A test-in energy audit and energy use modeling of the partner's proposed renovation package was performed for 41 affordable and middle income foreclosed homes in Florida and Alabama. HERS1 Indices ranged from 92 to 184 with modeled energy savings ranging from 3% to 50% (average of 26%). Analyses and recommendations were discussed with partners to encourage more efficient retrofits, highlight health and safety …

Evaluation Of Bias Issues Within Regression-Based Inverse Modeling Methods Against Climate And Building Characteristics Using Synthetic Data, Florida Solar Energy Center, Jamie Cummings

FSEC Energy Research Center®

Typically, a model of the energy use of a building is created using the building's characteristics and climate information for its location. However, models of existing homes can be created using monitored energy and climactic data in a process called inverse modeling. Such a technique has potential for those seeking to evaluate the savings a home before and after a retrofit (Meier, Busch, & Conner, 1988).Several programs use an inverse modeling technique to model a home's energy use based on total home energy use, heating and cooling energy use, and indoor/outdoor temperature data from a home (Kissock, Haberl, & Claridge, …

Side-By-Side Testing Of Water Heating Systems Results From 2009-2010 Testing, Florida Solar Energy Center, Carlos Colon

FSEC Energy Research Center®

The Hot Water System (HWS) Laboratory test facility at the Florida Solar Energy Center (FSEC) in Cocoa, FL was used for testing seven differing types of residential water heating systems. The HWS building provides unconditioned housing (similar to a garage in Florida) for one reference electric 50-gallon heater, three solar thermal electric assisted systems, one electric tankless system, one reference 40-gallon natural gas (NG) and tankless gas system. The performance of all seven systems has been compared in a side-by-side test configuration over a full year period. Simultaneous hot water draws take place for all hot water heating systems on …

Field Monitoring And Hourly Simulation Of Energy And Demand Savings From Use Of The Telkonet Ss5000 System Hotel Ac Occupancy Control, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

Air conditioning and heating control systems were installed in a 56-room hotel in central Florida. Thermostat setpoints in half of the rooms were adjusted when the room was detected to be unoccupied. Heating and cooling energy use was monitored for a period of 9.5 months. Energy and demand savings were analyzed.

Solar Water Heating Performance: Use Of Energy Factors, Florida Solar Energy Center, Carol Emrich

FSEC Energy Research Center®

The goal of increasing solar energy installations is widely accepted by all. The Florida Solar Energy Center (FSEC) concluded that the goal of increasing solar hot water system installations in Florida could be greatly enhanced by concentrating its efforts on new construction through simplification of the residential building energy code. Since implementation in 1980, the Florida Energy Efficiency Code for Building Construction has required a calculation procedure that assigns multipliers to residential water heating systems. The multiplier for every water heating system type except solar is based on the system's rated efficiency at standard conditions and is a one- or …

Poppleton Creek Wet Detention Pond, Stormwater Academy

BMP Trains Research and Publications

No abstract provided.

Building America Industrialized Housing Partnership (Baihp Ii), Annual Report - Budget Period 4 (Bp4), January 01, 2009 - December 31, 2009, Florida Solar Energy Center, Robert Abernethy

FSEC Energy Research Center®

This annual report summarizes the work conducted by the Building America Industrialized Housing Partnership (BAIHP - www.baihp.org) during the fourth budget period (BP4) of our contract, January 1, 2009 to December 31, 2009. Progress from the three previous budget periods is included for context.

BAIHP is led by the Florida Solar Energy Center (FSEC) of the University of Central Florida. With over 50 Industry Partners including factory and site builders, work was performed in four task areas:

• Task 1: System Evaluations
• Task 2: Prototype House Evaluations
• Task 3: Community Scale Evaluations
• Task 4: Post- Phase 3 Activities.

In Task 1, …

Baffle Box Effectiveness Monitoring Report, Stormwater Academy

BMP Trains Research and Publications

No abstract provided.

[Revised] Updated Miscellaneous Electricity Loads And Appliance Energy Usage Profiles For Use In Home Energy Ratings, The Building America Benchmark And Related Calculations, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

This report addresses the ever increasing percentage of whole house energy use that is attributable to miscellaneous electricity loads (MELs) and major appliances. It builds on earlier U.S. Department of Energy (DOE) reports on the same subject and incorporates the 2005 Residential Energy Consumption Survey (RECS) public use data set to determine how major appliance use is related to the number of bedrooms in existing homes. These data, coupled with existing and proposed DOE appliance testing and labeling standards, are then used to determine a set of baseline lighting and appliance energy end use values for use in the HERS …

Fabrication Of Integrated Optofluidic Circuits In Chalcogenide Glass Using Femtosecond Laser Direct Writing, Troy P. Anderson

Electronic Theses and Dissertations

Femtosecond laser direct writing (FLDW) is a versatile process that uses focused femtosecond pulses to modify the physical structure of a material, which can result in a shift of optical properties such as the linear and nonlinear refractive index. If the photon energy of the femtosecond pulses lies below the material bandgap, nonlinear absorption rather than linear absorption becomes the dominant mechanism of energy transfer to the material. In this manner, a focused femtosecond pulse train can be used to fabricate functional features such as optical waveguides, diffractive optical elements, or micro-fluidic elements within the volume of a transparent medium. …

Particle Separation Through Taylor-Couette Flow And Dielectrophoretic Trapping, Christopher Paul Bock

Electronic Theses and Dissertations

As the world population approaches seven billion, a greater strain is put on the resources necessary to sustain life. One of the most basic and essential resources is water and while two thirds of the earth is covered by water, the majority is either salt water (oceans and seas) or it is too contaminated to drink. The purpose of this project is to develop a portable device capable of testing whether a specific source of water (i.e. lake, river, well…) is potable. There are numerous filtration techniques that can remove contaminants and make even the dirtiest water clean enough for …

Synthesis, Structure, And Catalytic Properties Of Size-Selected Platinum Nanoparticles, Simon Armando Covone

Electronic Theses and Dissertations

The use of heterogeneous catalysis is well established in chemical synthesis, energy, and environmental engineering applications. Supported Pt nanoparticles have been widely reported to act as catalysts in a vast number of chemical reactions. In this report, the performance of Pt/ZrO2 nanocatalyst for the decomposition of methanol, ethanol, 2-propanol, and 2-butanol is investigated. The potential of each alcohol for the production of H2 and other relevant products in the presence of a catalyst is studied. All the alcohols studied show some decomposition activity below 200°C which increased with increasing temperature. In all cases, high selectivity towards H2 formation is observed. …

Structural Health Monitoring Of A Stadium For Evaluating Human Comfort And Structural Performance, Hasan Sazak

Electronic Theses and Dissertations

Light and rapid constructions as well as considerations such as improved line of sight and increased capacity for modern stadium structures make them vulnerable for vibration serviceability problems. These problems are also observed at convention centers, large shopping malls, concert halls and ballrooms. Especially when the individuals in a crowd are involved in some sort of coordinated motion, this type of loading creates the most potential for high levels of vibration. In order to understand the causes of vibration, vibration levels, service and safety levels, Structural Health Monitoring (SHM) can be implemented to track and evaluate performance of a structure …

The Relevance Of Time-To-Digital Converters To Small Platform Direction Finding Systems, Paul Jeffrey Nelson

Electronic Theses and Dissertations

This thesis explores a Time-Difference-of-Arrival (TDOA) approach to radio direction finding, utilizing picosecond-resolution Time-to-Digital Converters (TDCs). By measuring the relative time of arrival of a pulsed RF signal impinging on an antenna array, direction of arrival (DOA) can be ascertained. This technology enables versatile DOA calculation on platforms only several meters in length, and offers various size, weight, power, and cost advantages when compared to present DF technologies. A short baseline S-band TDOA DF system utilizing TDCs is designed, fabricated, and tested in a laboratory environment. This research suggests that such a DF system based on TDCs provides sufficient accuracy …

Characterization Of Aluminum Doped Zinc Oxide Thin Films For Photovoltaic Applications, Bojanna P. Shantheyanda

Electronic Theses and Dissertations

Growing demand for clean source of energy in the recent years has increased the manufacture of solar cells for converting sun energy directly into electricity. Research has been carried out around the world to make a cheaper and more efficient solar cell technology by employing new architectural designs and developing new materials to serve as light absorbers and charge carriers. Aluminum doped Zinc Oxide thin film, a Transparent conductive Oxides (TCO) is used as a window material in the solar cell these days. Its increased stability in the reduced ambient, less expensive and more abundance make it popular among the …

Correlation Between Preparation Parameters And Properties Of Molybdenum Back Contact Layer For Cigs Thin Film Solar Cells, Eigo Takahashi

Electronic Theses and Dissertations

Molybdenum (Mo) thin film back contact layers for thin film CuIn(1-x)GaxSe2 (CIGS) solar cells were deposited onto soda lime glass substrates using a direct current (DC) planar magnetron sputtering deposition technique. Requirements for the Mo thin film as a back contact layer for CIGS solar cells are various. Sheet resistance, contact resistance to the CIGS absorber, optical reflectance, surface morphology, and adhesion to the glass substrate are the most important properties that the Mo thin film back contact layer must satisfy. Experiments were carried out under various combinations of sputtering power and working gas pressure, for it is well known …

Experimental Studies Of The Heat Transfer Characteristics Of Silica Nanoparticle Water-Based Dispersion In Pool Boiling Using Nichrome Flat Ribbons And Wires, Diane Marie Vazquez

Electronic Theses and Dissertations

This work deals with a study of enhanced critical heat flux (CHF) and burnout heat flux (BHF) in pool boiling of water with suspended silica nanoparticles using ribbon-type and wire heaters. Previously our group and other researchers have reported three-digit percentage increase in critical heat flux in silica nanofluids. This study investigates the effect of various heater surface dimensions and cross-sectional shapes on pool boiling heat transfer characteristics of water and water-based nanofluids. CHF and BHF were analyzed for circular and rectangular cross-section nichrome wires and ribbons of increasing sizes in the range of 0.32mm to 2.38mm width, approaching a …

Mechanical Properties Of Carbon Nanotube/Metal Composites, Ying Sun

Electronic Theses and Dissertations

Carbon nanotubes (CNTs) have captured a great deal of attention worldwide since their discovery in 1991. CNTs are considered to be the stiffest and strongest material due to their perfect atomic arrangement and intrinsic strong in-plane sp 2—sp 2 covalent bonds between carbon atoms. In addition to mechanical properties, CNTs have also shown exceptional chemical, electrical and thermal properties. All these aspects make CNTs promising candidates in the development of novel multi-functional nanocomposites. Utilizing CNTs as fillers to develop advanced nanocomposites still remains a challenge, due to the lack of fundamental understanding of both material processing at the nanometer scale …

Analysis And Optimization Of A Solar Thermal Collector With Integrated Storage, Monica Bonadies

Electronic Theses and Dissertations

Solar energy, a topic popular in the United States during the oil embargo of the 1970’s, has become a relevant topic once more with the current focus on reducing greenhouse emissions. Solar thermal energy in particular has become popular as it uses existing steam turbine technology to produce electricity, with the benefit of using solar energy to produce steam rather than coal or nuclear heat sources. Solar thermal can also be used at lower temperatures to heat water for pools or for residential use. While this energy source has its benefits, it has the problem of being opportunistic – the …

Experimental And Theoretical Approaches To Characterization Of Electronic Nonlinearities In Direct-Gap Semiconductors, Claudiu Cirloganu

Electronic Theses and Dissertations

The general goal of this dissertation is to provide a comprehensive description of the limitations of established theories on bound electronic nonlinearities in direct-gap semiconductors by performing various experiments on wide and narrow bandgap semiconductors along with developing theoretical models. Nondegenerate two-photon absorption (2PA) is studied in several semiconductors showing orders of magnitude enhancement over the degenerate counterpart. In addition, three-photon absorption (3PA) is studied in ZnSe and other semiconductors and a new theory using a Kane 4-band model is developed which fits new data well. Finally, the narrow gap semiconductor InSb is studied with regard to multiphoton absorption, free-carrier …

A Decision Support System Methodology For The Selection Of Rapid Prototyping Technologies For Investment-Cast Gas Turbine Parts, Angela Gallagher

Electronic Theses and Dissertations

In the power generation sector, more specifically, the gas turbine industry, competition has forced the lead time-to-market for product advancements to be more important than ever. For design engineers, this means that product design iterations and final product development must be completed within both critical time windows and budgetary constraints. Therefore, two areas that have received significant attention in the research and in practice are: (1) rapid prototyping technology development, and (2) rapid prototyping technology selection. Rapid prototyping technology selection is the focus of this research. In practice, selecting the rapid prototyping method that is acceptable for a specific design …