Open Access. Powered by Scholars. Published by Universities.®
- Discipline
Articles 1 - 6 of 6
Full-Text Articles in Entire DC Network
Development Of Eco-Friendly Chitosan-G-Polyacrylamide Preformed Particle Gel For Conformance Control In High-Temperature And High-Salinity Reservoirs, Reem Elaf, Ahmed Ben Ali, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai
Development Of Eco-Friendly Chitosan-G-Polyacrylamide Preformed Particle Gel For Conformance Control In High-Temperature And High-Salinity Reservoirs, Reem Elaf, Ahmed Ben Ali, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Oil and gas extraction has become challenging nowadays due to the accompanying amount of excess produced water that results in poor recoverability of hydrocarbon, besides other environmental and economic isues. A recent and efficient technology for conformance control is the injection of preformed particle gels (PPGs), which results in a more practical production process. Nevertheless, existing treatments fail in high-temperature reservoirs, are extremely sensitive to salinity, and are hazardous. The characteristics of the designed PPG, such as mechanical strength and thermal durability, is mainly depend on their crosslinking method. Polysaccharides-based gels prepared by physical crosslinking are weaker than the ones …
Experimental And Machine Learning Studies On Chitosan-Polyacrylamide Copolymers For Selective Separation Of Metal Sulfides In The Froth Flotation Process, Keitumetse Monyake, Taihao Han, Danish Ali, Lana Z. Alagha, Aditya Kumar
Experimental And Machine Learning Studies On Chitosan-Polyacrylamide Copolymers For Selective Separation Of Metal Sulfides In The Froth Flotation Process, Keitumetse Monyake, Taihao Han, Danish Ali, Lana Z. Alagha, Aditya Kumar
Mining Engineering Faculty Research & Creative Works
The froth flotation process is extensively used for the selective separation of valuable base metal sulfides from uneconomic associated minerals. However, in this complex multiphase process, various parameters need to be optimized to ensure separation selectivity and peak performance. In this study, two machine learning (ML) models, artificial neural network (ANN) and random forests (RF), were used to predict the efficiency of in-house synthesized chitosan-polyacrylamide copolymers (C-PAMs) in the depression of iron sulfide minerals (i.e., pyrite) while valuable base metal sulfides (i.e., galena and chalcopyrite) were floated using nine flotation variables as inputs to the models. The prediction performance of …
Biodegradable Preformed Particle Gel (Ppg) Made Of Natural Chitosan Material For Water Shut-Off Application, Reem Elaf, Ahmed Ben Ali, Mohammed Saad, Ibnelwaleed A. Hussein, Hassan Nimir, Baojun Bai
Biodegradable Preformed Particle Gel (Ppg) Made Of Natural Chitosan Material For Water Shut-Off Application, Reem Elaf, Ahmed Ben Ali, Mohammed Saad, Ibnelwaleed A. Hussein, Hassan Nimir, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Oil and Gas Extraction Frequently Produces Substantial Volumes of Produced Water, Leading to Several Mechanical and Environmental Issues. Several Methods Have Been Applied over Decades, Including Chemical Processes Such as In-Situ Crosslinked Polymer Gel and Preformed Particle Gel, Which Are the Most Effective Nowadays. This Study Developed a Green and Biodegradable PPG Made of PAM and Chitosan as a Blocking Agent for Water Shutoff, Which Will Contribute to Combating the Toxicity of Several Commercially Used PPGs. the Applicability of Chitosan to Act as a Crosslinker Has Been Confirmed by FTIR Spectroscopy and Observed by Scanning Electron Microscopy. Extensive Swelling Capacity …
Studies On The Enrichment Feasibility Of Rare Earth-Bearing Minerals In Mine Tailings, Jose L. Corchado-Albelo, Lana Z. Alagha
Studies On The Enrichment Feasibility Of Rare Earth-Bearing Minerals In Mine Tailings, Jose L. Corchado-Albelo, Lana Z. Alagha
Mining Engineering Faculty Research & Creative Works
This Study Aimed to Investigate the Potential of Enrichment of Rare-Earth-Bearing Minerals in Historic Mine Tailing using the Froth Flotation Process. Characterization Studies Indicated that Tailings Contained 11,000 Ppm of Rare Earth Elements (REEs). the Major Mineral in the Tailings Was Apatite at ~84%, Which Was Associated with Iron Oxides (~16%). TESCAN's Integrated Mineral Analysis (TIMA) Showed that Monazite Was the Main REE Mineral, and 69% of Monazite Was Locked in Apatite Grains. Characterization Studies Suggested that the Separation of REEs-Bearing Apatite from Iron Oxides is Possible using Froth Flotation, Wherein Apatite Was Floated and Iron Oxides Were Depressed. Zeta …
Drug-Loaded Chitosan Film Prepared Via Facile Solution Casting And Air-Drying Of Plain Water-Based Chitosan Solution For Ocular Drug Delivery, Boxuan Li, Juan Wang, Qin Gui, Hu Yang
Drug-Loaded Chitosan Film Prepared Via Facile Solution Casting And Air-Drying Of Plain Water-Based Chitosan Solution For Ocular Drug Delivery, Boxuan Li, Juan Wang, Qin Gui, Hu Yang
Chemical and Biochemical Engineering Faculty Research & Creative Works
Chitosan is a nature-based polymer with low toxicity, excellent biocompatibility and biodegradability. However, the intractable solubility of chitosan in water and most conventional solvents hampers its biomedical applications. Following the dissolution method for dissolving chitosan in plain water developed by us, chitosan was dissolved in ionic liquid followed by overnight freezing at −20 °C and subsequent solvent exchange with plain water at room temperature. In this study, we fabricated a drug-carrying chitosan film via solution casting and air-drying by using the plain water-based chitosan solution. Specifically, brimonidine tartrate (BT), an antiglaucoma drug, was dissolved in the plain-water based solution and …
Synthesis, Characterization And Selected Application Of Chitosan-Coated Magnetic Iron Oxide Nanoparticles, M. A. Radwan, Mohamed Adel Rashad, M. A. Sadek, Hany A. Elazab
Synthesis, Characterization And Selected Application Of Chitosan-Coated Magnetic Iron Oxide Nanoparticles, M. A. Radwan, Mohamed Adel Rashad, M. A. Sadek, Hany A. Elazab
Chemical and Biochemical Engineering Faculty Research & Creative Works
In this research, we report an efficient method to prepare highly active chitosan-coated magnetic iron oxide nanoparticles by implementing co-precipitation technique which is used for wastewater treatment applications. Chitosan-coated magnetic iron oxide nanoparticles were synthesized and characterized using TEM, XRD, and XPS. A comparative study has been made between chitosan powder and chitosan coated with magnetic nanoparticles with respect to the rate of adsorption of copper from aqueous solution. It was also experimentally verified that chitosan coated magnetic iron oxide nanoparticles are much more effective in adsorption of heavy metals than chitosan powder and it takes just few minutes instead …