Digital Commons Network^™

Dynamics Of 1d Granular Column, Luo Zuo

Dissertations

This dissertation is focused on a discrete element study of the dynamics of a one- dimensional column of inelastic spheres that it subjected to taps by prescribing a half sine wave pulse to supporting floor. Contact interactions obey the Walton-Braun soft-sphere model in which the loading (unloading) path is governing by linear springs of stiffness K1, thereby producing col lisional energy loss through a constant restitution coefficient e. Over a ‘short time scale’, computations are done to examine the floor pulse wave as it propagates through the column contact network. Comparisons of the simulated findings are made with experimental measurements …

Computational Optimization Methods For Modeling The Effect Of Muscle Forces On Bone Strength Adaptation, Catherine Siena Florio

Dissertations

An improved understanding of the mechanical influences that alter the strength of a bone can aid in the refinement of the wide array of currently available techniques to counteract the losses of bone strength that occur due to age or disuse both on Earth and in Space. To address this need, computational modeling methods to quantitatively analyze and compare the effects of mechanical factors on the strength of a targeted bone within a multibone, multimuscle system are developed and implemented in this work. Through a more detailed representation of the system in which the bone acts and the creation of …

Adsorption Of Particles On Fluid-Liquid Interfaces, Bhavin Dalal

Dissertations

Particles floating on fluid-liquid interfaces are of considerable interest because of their importance in a range of physical applications and biological processes, e.g., self-- assembly of particles at fluid-fluid interfaces resulting in novel nano structured materials, stabilization of emulsions, formation of pollen and insect egg rafts, etc. The aim of this dissertation is to explore the mechanism by which particles are adsorbed at fluid-liquid interfaces. It is shown that the inertia of a particle plays an important role in its motion in the direction normal to a fluid-liquid interface, and in determining the particles adsorption trajectory and orientation in …

Design And Automated Operation Of A Condensation-Induced Depressurization System, Fen Du

Dissertations

Typical examples of the use of the vacuum environments in industry include vacuum coating, vacuum drying, vacuum packing, vacuum casting, vacuum heat treatment, vacuum cooling for food storage and leakage detection. Most of these applications require a comparatively small volume of vacuum environment. However, there are also many applications where enormous vacuum chambers are needed. For example, a large vacuum chamber is used to simulate the conditions of space.

This study investigates the design and the automated operation of a vacuum generation system based on the idea of the condensation-induced depressurization with prefilled condensable medium in a confined, adiabatic chamber. …

Dispersion Of Particles On Liquid Surfaces, Sathishkumar Gurupatham

Dissertations

When small particles (e.g., flour, pollen, etc.) come in contact with a liquid surface, they immediately disperse. The dispersion can occur so quickly that it appears explosive, especially for small particles on the surface of mobile liquids like water. This explosive dispersion is the consequence of capillary force pulling particles into the interface causing them to accelerate to a relatively large velocity. The maximum velocity increases with decreasing particle size; for nanometer-sized particles (e.g., viruses and proteins), the velocity on an air-water interface can be as large as 47 m/s. They also oscillate at a relatively high frequency about their …

Modeling Of Non-Uniform Hydrodynamics And Catalytic Reaction In A Solids-Laden Riser, Rajeshkumar Patel

Dissertations

The riser reactors are widely used in a variety of industrial applications such as polymerization, coal combustion and petroleum refinery because of the strong mixing of gas and solids that yields high heat and mass transfer rates, and reaction rates. In a Fluid Catalytic Cracking (FCC) process, the performance of riser reactor is strongly dependent on the interaction between the fluid and catalysts, since the reaction takes place on the active surface of the catalysts. This is why, the local coupling between hydrodynamics and reaction kinetics is critical to the development of riser reaction models. The local gas-solids flow structure …

Constitutive Modeling Of Glassy Memory Polymers, Mahesh Khanolkar

Dissertations

The aim of this research is to develop constitutive models for non-linear materials. Here, issues related for developing constitutive model for glassy shape memory polymers are addressed in detail. Shape memory polymers are novel material that can be easily formed into complex shapes, retaining memory of their original shape even after undergoing large deformations. The temporary shape is stable and return to the original shape is triggered by a suitable mechanism such heating the polymer above a transition temperature. Glassy shape memory polymers are called glassy because the temporary shape is fixed by the formation of a glassy solid, while …

Transport Mechanisms And Modeling Of Riser Reactor, Dawei Wang

Dissertations

Riser reactors are extensively employed in various industrial applications. In a riser reactor, the hydrodynamics is closely interacted with kinetic reactions. Common models for the performance prediction of riser reactors overlook this vital coupling effect, which not only miss the important reaction characteristics in the dense-phase transport regime of riser reactors but also misinterpret the kinetic properties via ad hoc adjustments. It is noted that the modeling of hydrodynamics in riser flows has major flaws in its predictability of phase transport in both dense-phase and accelerating regimes where most reactions occur. In addition, with the spray feeding of reactants at …

Optimal Synthesis Of Planar Adjustable Mechanisms, Chong Peng

Dissertations

Adjustable mechanisms provide degrees of flexibility while retaining desirable features of one degree of freedom close-loop mechanisms, such as simplicity, stability, and high speed capabilities. By adjusting linkage parameters, additional phases of motions can be achieved using the same hardware. However, an adjustment to the mechanism adds only one or two additional design positions and divides desired positions into "phases", each of which contains only a few positions usually insufficient for industrial applications.

In order to extend the design position limitation of adjustable mechanisms, an optimal synthesis method based on link length structural error is developed and applied to kinematic …

Motion Coordination And Control In The Development Of A Gait Rehabilitation System, Yazan Ahmad Manna

Dissertations

While most take their ability to walk for granted, some are unable to walk due to any number of pathologies, such as traumatic brain injury (TBI), spinal cord injury (SCI), and Parkinson's disease. Decreased activity has been shown to be associated with rapidly deconditioning. Rehabilitation techniques that afford patients the ability to begin reconditioning through walking sooner may ultimately enhance their return to a better quality of life. To assist the functional recovery of such patients, an appropriate afferent input to the spinal cord will help in the therapy of the patient. Manual training is labor intensive, costly, and ergonomically …

Electrohydrodynamic Manipulation Of Multiphase Fluids, Sai C. Nudurupati

Dissertations

In microfluidic devices, the fluid can be manipulated either as continuous streams or droplets. The latter is particularly attractive as individual droplets can not only move but also split and fuse, thus offer a greater flexibility in applications such as a laboratory-on- a-chip. In this thesis, a technique is developed that uses an externally applied electric field for manipulating and removing particles trapped on the surface of a drop. The drop is assumed to be immersed in another liquid with which it is immiscible, and the electric field is generated by placing electrodes on the sides of the microdevice. Both …

Heterogeneous Flow Structure And Gas-Solid Transport Of Riser, Jun You

Dissertations

This study aims to understand physical mechanisms of gas-solid transport and riser flow, investigate heterogeneous flow structures of gas-solid transport and their formation mechanism of the in riser flows, both in axial and radial directions. It provides sound interpretation for the experimental observation and valuable suggestion to riser reactor design. Chemical reaction is also coupled with flow hydrodynamics to board the industrial applications. This study mainly focuses on mathematical modeling approach based upon physical mechanism, and endeavor to validate model prediction against available experimental data.

First of all, most important physical mechanisms including inter-particle collision force, gas/solid interfacial force and …

Electro Hydrodynamic Manipulation Of The Process Of Self-Assembly Of Particles At Fluid-Fluid Interfaces, Muhammad Mansoor Janjua

Dissertations

This dissertation is divided into two parts, first deals with the numerical study of motion of dielectric particles subjected to nonuniform electric fields and second deals with the process of self-assembly of particles at fluid-fluid interfaces and subjected to uniform electric field normal to the interface. In the numerical study, the particles are moved using a direct simulation scheme (DNS) in which the fundamental equations of motion of fluid and solid particles are solved without the use of models. The motion of particles is tracked using a distributed Lagrange multiplier method (DLM) and the electric force acting on the particles …

Experiment And Modeling : Ignition Of Aluminum Particles With A Co2 Laser, Salil Mohan

Dissertations

Aluminum is a promising ingredient for high energy density compositions used in propulsion systems, explosives, and pyrotechnics. Aluminum powder fuel additives enable one to achieve higher combustion enthalpies and reaction temperatures. Therefore, to develop aluminum based novel and customized high density energetic materials, understanding of ignition and combustion kinetics of aluminum powders is required. In most practical systems, metal ignition and combustion occur in environments with rapidly changing temperatures and gas compositions. The kinetics of exothermic reactions in related energetic materials is commonly characterized by thermal analysis, where the heating rates are very low, on the order of 1 -50 …

Kinematic Synthesis Of Planar Four Bar And Geared Five Bar Mechanisms With Structural Constraints, Yahia Mohammad Al-Smadi

Dissertations

In motion generation, the objective is to calculate the mechanism parameters required to achieve or approximate a set of prescribed rigid-body positions. This doctoral dissertation study is aimed to integrate the classical kinematic analysis of a planar four-bar and geared five-bar motion generation with three structural design constraints. These constraints consider driving link static torque, deflection of the crank and buckling of the follower for a given rigid-body load or constant external load.

This kineto-elastostatic analysis is based on the following assumptions to be considered during the analysis; the crank and the follower are elastic members and the coupler is …

Multi-Functional, Self-Sensing And Automated Real-Time Non-Contact Liquid Dispensing System, Qiong Shen

Dissertations

Liquid dispensing in the order of pico-liter has become more and more important in biology, electronics and micro-electronic-mechanical-system (MEMS) during the past two decades due to the rapid progress of researches on the deoxyribonucleic acid (DNA) microarray, compact and low-cost direct write technology (DWT), organic semiconductors and nano-particles.

The existing approaches, commercialized or experimental, to liquid dispensing in minute amounts have one common shortcoming: open loop control, i.e., they have no direct control on the quality of dispensed liquid. In contrast, the SmartPin has intrinsic self-sensing capability to not only control the process of liquid dispensing, but also the results …

Density Relaxation Of Granular Matter Through Monte Carlo And Granular Dynamics Simulations, Oleksandr M. Dybenko

Dissertations

Granular materials are the principal ingredients of the industrial complex involved with the handling and processing of bulk solids including pharmaceuticals, chemicals, agricultural and mining materials. Despite the enormous importance of these materials in society, their behavior is not well-understood; in fact, there is no known model available that is capable of predicting the wide range of phenomenon that have been observed. One of the most important of these is known as density relaxation. Here, a granular material undergoes an increase in solids fraction as a result of the application of discrete taps or continuous vibrations.

In this dissertation, the …

Micro, Meso And Macro Materials Processing Using High-Speed Liquid Projectiles, Veljko Samardzic

Dissertations

The objective of this research is developmentof aknowledge base of materials processing by the impact of high-speed liquid projectiles. The work involved experimental study of generation and applications of high-speed liquid projectiles. The projectiles were generated by the launchers, which used gunpowder as an energy source. The experiments were carried out at the low (O.35g of the powder), middle (1.2g) and high (10g to 70g) levels of energy consumptions and at several different launchers modification.

Experimental investigation of effect of gun powder mass on energy of projectile was conducted for ductile and brittle targets. An array of experimental …

Direct Simulations Of Cells Motions And Deformations In Flow, Quan Jin

Dissertations

Direct numerical simulations (DNS) are used to study the motions and deformations of blood cells, especially leukocytes, in pressure driven flows in parallel plate channels with both smooth and uneven walls under adhesion force between the leukocytes and the channel wall.

Leukocytes are represented by two composite fluid models. The first model is the compound-drop model in which the cytoplasm and the nucleus are modeled as fluids, and the second one is the drop-rigid-particle model in which the cytoplasm is modeled as a fluid and the nucleus as a rigid particle. The adhesion force is computed using two adhesion force …

Synthesis And Analysis Of Reactive Nanocomposites Prepared By Arrested Reactive Milling, Swati M. Umbrajkar

Dissertations

Different types of reactive nanocomposites have been synthesized by Arrested Reactive Milling (ARM). The technical approach was to increase the interface area available for heterogeneous reaction between solid fuel and oxidizer components. Using aluminum as the main fuel and different metal oxides as oxidizers, highly energetic reactive nanocomposites with different degrees of structural refinement were synthesized. Specifically, stoichiometric Al-MoO₃, Al-CuO, and Al-NaNO₃ material systems were studied in detail.

The correlation of heterogeneous exothermic reactions occurring in the nanocomposite powders upon their heating at low rates and ignition events observed for the same powders heated rapidly was of …

Nanoparticle Formation And Coating Using Supercritical Fluids, Abhijit Aniruddha Gokhale

Dissertations

Jet breakup phenomenon and nanoparticle formation

The focus of this dissertation is to study the SAS process to manufacture nanoparticles with minimum agglomeration, controlled size and size distribution. Solution jet breakup and solvent evaporation into supercritical fluid (SC CO₂) is studied using high speed charged coupled device (CCD) camera facilitated with double shot particle image veloimetry (PIV) laser and a high pressure view cell. Particles formation using SAS is studied. Polyvinylpyrrolidone (PVP) particles are formed using micron size capillary nozzles and combination of thermodynamically good and poor solvents in order to achieve nano-sized particles with reduced agglomeration and …

Flow Characteristics And Phase Interactions Of Evaporating Sprays In Gas-Solid Suspensions, Muhammad Mushahid Rafique Qureshi

Dissertations

Evaporating spray jets have a wide range of applications in many industrial processes such as fluidized catalytic cracking of crude oil in petroleum refinery, coal gasification, fluidized coking to make synthetic crude oil, and condensed mode gas polymerization. The rapid evaporation of spray jets significantly affects the gas-solids mixing, solids concentration, gas/solids temperature and gas/solids velocity acceleration. The complex interactions mechanism of phase change, three phase interaction, heat and mass transfer of gas, solids and evaporating droplets dominate the process efficiency and product quality. In such three-phase flows, the phase transport characteristics are influenced by both droplet-gas interaction and droplet-solid …

Investigation Of Formation And Applications Of High-Speed Liquid Projectiles, Oleg Petrenko

Dissertations

The work comprises experimental and numerical studies of generation and application of high-speed liquid projectiles. Numerical models were created for a projectile formation by two kinds of launchers, water extruder and water cannon. In the water extruder the kinetic energy of a fast moving piston is transferred to the water load and extrudes the load at a high speed. By contrast in the water cannon the water load itself accumulates the kinetic energy from the expanding combustion gasses. Then, in the course of water motion through the converging nozzle the energy is redistributed between head and tail of the projectile. …

Constitutive Modeling Of The Thermo-Mechanics Associated With Crystallizable Shape Memory Polymers, Gautam Barot

Dissertations

This research addresses issues central to material modeling and process simulations. Here, issues related for developing constitutive model for crystallizable shape memory polymers are addressed in details. Shape memory polymers are novel material that can be easily formed into complex shapes, retaining memory of their original shape even after undergoing large deformations. The temporary shape is stable and return to the original shape is triggered by a suitable mechanism such heating the polymer above a transition temperature. Crystallizable shape memory polymers are called crystallizable because the temporary shape is fixed by a crystalline phase, while return to the original shape …

Effect Of Polymorphic Phase Transformations Within An Alumina Layer On The Ignition Of Aluminum Particles, Mikhaylo Aleksiyovych Trunov

Dissertations

Experimental measurements of aluminum ignition temperature and models used to describe aluminum ignition are reviewed. It is shown that the current models cannot describe ignition of aluminum powders of different sizes and ignited under various experimental conditions. The properties of and phase changes occurring in the alumina scale existing on the surface of aluminum particles at different temperatures are systematically studied. The mechanism of aluminum oxidation is quantified and a new simplified ignition model is developed.

Thermogravimetry was used to study the oxidation of aluminum powders of various particle sizes and surface morphologies in oxygen at temperatures up to 1500°C. …

Synthesis And Characterization Of Mechanically Alloyed Aluminum-Based Compounds As High Energy Density Materials, Xiaoying Zhu

Dissertations

A new type of metastable reactive powders for potential use as high energy density materials in propellants, explosives, and pyrotechnics was developed. These powders are intended to replace aluminum typically added to energetic formulations to increase reaction enthalpy and temperature. The new materials are metastable aluminum-based alloys, which enable achievement of substantially reduced ignition temperatures and accelerated bulk burn rates compared to aluminum. Titanium and lithium were used as alloying components. The materials properties and characteristics leading to their enhanced combustion performance were investigated. The powders were prepared using mechanical alloying and characterized using X-Ray Diffraction (XRD), Scanning Electron Microscopy …

Dynamic Simulations Of Particle Suspensions Subjected To An External Electric-Field, Xianjin Jiang

Dissertations

A numerical method is performed to study the suspension of polarizable particles in nonconductive solvents subjected to external electric fields. Such particles experience both hydrodynamic and electrostatic interactions. The hydrodynamic force acting on the particles is determined using the Stokesian dynamics method under the assumption that the Reynolds number is much smaller than 1, while the electrostatic force is determined by differentiating the electrostatic energy of the suspension, which is computed from the induced particle dipoles. In addition, the multiple image method is used to compensate for the electrostatic force when two particles are close to each other. Because the …

Modeling, Design, And Fabrication Of Pulsed Fluidic Micro-Actuators, Max Roman

Dissertations

The forced vibration of a thin flexible plate or membrane in a sealed cavity with a small opening can cause fluid to be pumped into and out-of the cavity. At particular frequencies and amplitudes of vibration, a streaming of vortex rings can occur near the orifice. These vortex rings move under their own self-induced momentum. Downstream of the opening the rings ultimately break up and can form a fully developed jet. This work is dedicated to the analysis, design, and fabrication of electrostatic micro fluidic actuators, which use the pulsing mechanism described above to generate a fluid flow. Particle Image …

The Effects Of Aging On Cardiac Mechanics, Samuel C. Lieber

Dissertations

It is well established that the aging heart exhibits left ventricular (LV) diastolic dysfunction and changes in mechanical properties, which have been attributed to alterations in the extracellular matrix (ECM). The investigators tested the hypothesis that the mechanical properties of cardiac myocytes significantly change with aging thereby contributing to the LV diastolic dysfunction. Cellular mechanical properties were determined by indenting cells with an atomic force microscope (AFM). The indentation results were interpreted by modeling the AFM probe as a blunted cone and determining an apparent elastic modulus (B) with classical infinitesimal strain theory (CIST). A commercially available finite element software …

Robust Techniques And Applications In Fuzzy Clustering, Amit Banerjee

Dissertations

This dissertation addresses issues central to frizzy classification. The issue of sensitivity to noise and outliers of least squares minimization based clustering techniques, such as Fuzzy c-Means (FCM) and its variants is addressed. In this work, two novel and robust clustering schemes are presented and analyzed in detail. They approach the problem of robustness from different perspectives. The first scheme scales down the FCM memberships of data points based on the distance of the points from the cluster centers. Scaling done on outliers reduces their membership in true clusters. This scheme, known as the Mega-clustering, defines a conceptual mega-cluster which …