Digital Commons Network^™

Experimental Testing Of A 3d-Printed Metamaterial Slow Wave Structure For High Power Microwave Generation, Antonio B. De Alleluia

Electrical and Computer Engineering ETDs

A metamaterial (MTM) high power microwave (HPM) vacuum electron device (VED) was developed using 3D printing technology. The specific geometric pattern of the source can produce both negative permittivity and permeability to interact with a relativistic electron beam. The electron beam is generated using a pulsed electron accelerator with a maximum energy of 700 keV and lasting approximately 16 ns. The design of this novel VED consists of a circular waveguide loaded with complementary split-ring resonators in a linear periodic arrangement in which the relativistic beam travels guided by a magnetic field. The electrons interact with the MTM producing electromagnetic …

Nonlinear Characterizing Of A New Titanium Nitride On Aluminum Oxide Metalens, Michael A. Cumming

Theses and Dissertations

A sample metalens generated from Titanium Nitride deposited onto Aluminum Oxide was designed to focus at 10 microns with a beam centered at 800nm, and when analyzed with high intensity illumination was found to have a focal length of 9.650 ±.003µm at an intensity of 16.93[MW/cm² ]. Analyzing this change by comparing it to a Fresnel Lens’ physics shows that for this lens, the effective nonlinear index of refraction is certainly greater than the nonlinear index of just Titanium Nitride itself, at −1.6239 × 10⁻¹⁵[m²/W] compared to the materials −1.3 × 10⁻¹⁵[m^{2 …}

Characterization Of Argon And Ar/Cl2 Plasmas Used For The Processing Of Niobium Superconducting Radio-Frequency Cavities, Jeremy J. Peshl

Physics Theses & Dissertations

The plasma processing of superconducting radio-frequency (SRF) cavities has shown significant promise as a complementary or possible replacement for the current wet etch processes. Empirical relationships between the user-controlled external parameters and the effectiveness of Reactive Ion Etching (RIE) for the removal of surface layers of bulk niobium have been previously established. However, a lack of a physical description of the etching discharge, particularly as the external parameters are varied, limits the development of this technology. A full understanding of how these external parameters affect both the amount of material removed and the physical properties of the plasma would aid …

Pulse Power Effects On Transient Plasma Ignition For Combustion, David Wayne Alderman Ii

Electrical & Computer Engineering Theses & Dissertations

Transient plasma ignition (TPI) uses highly non-equilibrium plasmas, driven by less than 100 nanosecond, high-voltage pulses, to initiate combustion. The effects of pulse repetition frequency (PRF) and ultrashort nanosecond rise times on TPI are investigated in this work using lean, stoichiometric, and rich air-fuel mixtures at atmospheric pressure. Experimental data show the transient plasmas driven by ultrashort rise time, high voltage pulses at high PRF’s enhance the combustion of lean or stoichiometric air-methane mixtures in a static chamber. In particular, increasing PRF enhances the combustion performance by means of reduced delay times independent of the equivalence ratio of the air-fuel …

Numerical Simulation Of Unstable Laser Resonators With A High Gain Medium, Robert L. Lloyd

Theses and Dissertations

This research focused on the numeric simulation of unstable laser resonators with high gain media. In order to accomplish the research, the modes and eigenvalues for various bare cavity resonator were computed followed by modes of a resonator in the presence of gain. Using a Fourier Split Step Method in a Fox and Li iteration scheme, different laser outputs for various laser cavities with gain were computed. Various parameters defining positive branch confocal unstable resonators were chosen corresponding to four studies. The four studies focused on modifying laser cavity Fresnel number, gain medium parameters, gain cell position, and gain cell …

On The Pulsed Laser Ablation Of Metals And Semiconductors, Todd A. Van Woerkom

Theses and Dissertations

This dissertation covers pulsed laser ablation of Al, Si, Ti, Ge, and InSb, with pulse durations from tens of picosecond to hundreds of microseconds, fluences from ones of J/cm² to over 10,000 J/cm², and in ambient air and vacuum. A set of non-dimensional scaling factors was created to interpret the data relative to the laser and material parameters, and it was found that pulse durations shorter than a critical timescale formed craters much larger than the thermal diffusion length, and longer pulse durations created holes much shallower than the thermal diffusion length. Low transverse order Gaussian beams …

Increasing The Functionality Of Additive Manufacturing Through Atmospheric Microplasma And Nanotechnology, Alexander Jon Ulrich

Doctoral Dissertations

Additive Manufacturing (AM) has been changing the manufacturing landscape for the last 20 years. As the interest and demand for both polymer and metal-based 3D printing has grown, the materials and machines used have increased in capabilities. Despite the growth and advancement, there are still a large number of improvements that can be made to add functionality to 3D printers. Metal AM, a subcategory of 3D printing, has garnered much attention among industrial applications with large companies such as General Electric trying to implement the technology to increase innovative designs for motors. Some of the limitations on AM have to …

Polarization Properties Of Airy And Ince-Gaussian Laser Beams, Sean Michael Nomoto

Graduate Theses and Dissertations

The description of polarization states of laser light as linear, circular polarization within the paraxial scalar wave approximation is adequate for most applications. However, this description falls short when considering laser light as an electromagnetic wave satisfying Maxwell's equations. An electric field with a constant unit vector for direction of the field and a space dependent complex scalar amplitude in the paraxial wave approximation does not satisfy Maxwell equations which, in general, requires all three Cartesian components of electric and magnetic fields associated for a nonzero laser beam to be nonzero.

Physical observation of passing a linearly polarized laser through …

Optical Response Analysis Of Thz Photoconductive Antenna Using Comsol Multiphysics, Jose Isaac Santos Batista

Electrical Engineering Undergraduate Honors Theses

A THz photoconductive antenna consists of antenna pads laid over a photoconductive substrate. These types of antennas are excited through the application of an optical pump (laser), which generates carriers inside the semiconductor. The acceleration and recombination of these carriers produce photocurrent that excites the antenna and generates THz pulse. This thesis focuses on analyzing the optical response of a photoconductive antenna, which consist of the interaction of the incident electric field of a laser pump with the radiating device. It develops the amplitude modulation process of a plane wave of light into a laser pump. It also takes into …

Optical Enhancement In Periodic Plasmonic Gratings For Sers And Metal-Semiconductor-Metal Photodetectors (Msm-Pds) Applications, Ahmad Aziz Darweesh

Graduate Theses and Dissertations

This dissertation is aimed to numerically study the effect of plasmonic grating electrodes on the efficiency of metal-semiconductor-metal photodetectors (MSM PDs) and the sensitivity of Surface Enhanced Raman Spectroscopy (SERS). This research can benefit many areas of nanoscience and optics, including plasmonic applications, such as, super lenses, nano-scale optical circuits, optical filters, surface plasmon enhanced photo-detectors solar cells, imaging sensors, charge-coupled devices (CCD), and optical-fiber communication systems. Several parameters, wire widths and thickness, gap space, taper angle, and the incident wavelength and angle, were investigated. The goal of this research is to utilize the plasmonic phenomenon by using plasmonic gratings …

Development Of A Model For 11C Production Via The 14N(P,Α) Reaction Using A Ge Pettrace Cyclotron, Amy C. Hall

Theses and Dissertations

The GE PETtrace 800 Series cyclotron at the Missouri University Research Reactor (MURR) facility is used extensively for medical and research radioisotope production. However, no model exists of its radioisotope production performance, and the energy, full intensity, and spatial profile of the cyclotron proton beam has never been measured. To improve production planning for research and medical isotopes, a MCNP6 model of the isotope production process was developed to maximize efficiency in target design and better understand irradiation conditions. Since the cyclotron beam energy and profile has a significant impact on the types of reactions that take place and the …

The Non-Mechanical Beam Steering Of Light In Reflective Inverse Diffusion, Eric K. Nagamine

Theses and Dissertations

Wavefront shaping is a technique that uses spatial light modulators to conjugate the phase of light incident on a rough surface, such that the light will refocus after reflection. This refocusing effect is called reflective inverse diffusion. There currently are two different approaches used to achieve reflective inverse diffusion: iterative methods and matrix methods. Iterative methods find one phase mask which allows for reflected light to be focused at a single, specific position, with results that are immediately available and continuously improving. Matrix methods calculate the complex matrix which describes the rough surface and allows for reflected light to be …

Global Ionosonde And Gps Radio Occultation Sporadic-E Intensity And Height Comparison, Joshua Y. Gooch

Theses and Dissertations

A global, multi-year comparison of low and mid-latitude COSMIC GPS radio occultation (RO) sporadic-E (E_s) plasma frequency and altitude and Digisonde blanketing frequency (fbEs) and altitude within 150 km and 30 minutes of each other. RO methods used to estimate the intensity of the E_s layer include the scintillation index S4, total electron content (TEC) with both a constant and variable E_s cloud thickness, and an Abel transform. The S4 and TEC with varying thickness techniques both under-represent the fbEs values while the TEC with constant thickness and Abel transform better estimate Digisonde fbEs values. …

Empirical Studies Related To Open Questions Regarding Geomagnetic Storms, Bruce Patrick Tepke

Graduate Theses, Dissertations, and Problem Reports

Earth’s magnetosphere is subject to disturbances, as evidenced by variations of the geomagnetic field in space and on the ground. It is generally understood that most such disturbances are controlled by variations in the solar wind, with interplanetary magnetic field orientations directed southward opposite to Earth’s dipole magnetic axis being most conducive to energy transfers into the magnetosphere, thus resulting in more disturbed intervals. However, the exact functional form for solar wind driving of the magnetosphere has been widely studied, with proposed functional forms varying from the simple half-wave electric rectifier to expressions with a much more complicated dependence upon …

Evaluation Of X-Ray Spectroscopic Techniques For Determining Temperature And Density In Plasmas, Theodore Scott Lane

Graduate Theses, Dissertations, and Problem Reports

Temperature and density measurements of plasmas are important for understanding various phenomena. For example, equations of state, most scaling arguments for Inertial Confinement Fusion and laboratory astrophysics all rely upon accurate knowledge of temperature and density. Spectroscopy is a non-invasive technique to measure these quantities. In this work we establish a new spectroscopic technique by using it to determine temperature. We also compare and contrast the capability of two codes, PrismSPECT and ATOMIC, to infer electron density from experimentally acquired spectra via Stark broadening.

We compare and contrast the capability of isoelectronic line ratios and inter-stage line ratios in an …

Characterization Of A Green Electric Solid Propellant For Electric Propulsion, Matthew Scott Glascock

Doctoral Dissertations

"Electric solid propellants are advanced solid chemical rocket propellants that can be controlled (ignited, throttled and extinguished) through the application and removal of an electric current. These propellants are also being considered for use in ablative pulsed plasma thruster and multimode systems. In this work, the behavior and performance of a novel green electric solid propellant operating in an electrothermal ablation-fed pulsed plasma thruster was investigated. Using an inverted pendulum micro-Newton thrust stand, the impulse bit and specific impulse of the device using the electric solid propellant were measured for short-duration and long-duration runs to end-of-life, at energy levels of …