Digital Commons Network^™

Control Of Pneumatically Actuated Drones, Benjamin Scott Jackson

Graduate College Dissertations and Theses

Aerial autonomous vehicles have played a crucial role in assisting humans with safety-critical operations on Earth. Applications include natural disaster response, environment surveillance, and infrastructure inspection. As humans hope to return to the Moon, as per NASA's latest initiatives, autonomous vehicles could serve as a key component in keeping humans out of harm's way. However, many celestial objects lack an atmosphere, making propeller-powered drones inadequate. To address this problem, this thesis presents an optimal control methodology to demonstrate how systems actuated using cold gas thrusters may play the role of drones in space. In place of cold gas thrusters, this …

Development Of Guidance, Navigation, And Control Systems For Multi-Spacecraft Assembly In Proximity Operations, Mohammed Ayman Atallah

Theses

This thesis presents the development of Guidance, Navigation, and Control (GNC) algorithms for multi-spacecraft assembly in proximity operations. A 3-DOF mathematical model of spacecraft relative translational motion is derived using the Euler-Lagrange method. Additionally, a 6-DOF mathematical model of spacecraft relative translational and rotational motion is derived using the twistor method, with consideration for the kinematic coupling effect. A new Linear Time-Invariant (LTI) model is developed based on the twistor model, which is utilized in the design of the GNC systems. Both LTI Model Predictive Control (MPC) and Linear Time-Varying (LTV) MPC algorithms are employed to develop Guidance and Control …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Acausal Modeling Of Wind Turbines With Validation And Control Studies, Kazi Ishtiak Mohsin

Graduate Thesis and Dissertation 2023-2024

This thesis involves the modeling, validation, and control studies of a Control-Oriented, Reconfigurable, and Acausal Floating Turbine Simulator (CRAFTS), that is currently under development. CRAFTS uses Modelica®, an object-oriented, declarative, multi-domain modeling language for physical system modeling in the Dymola environment. The CRAFTS simulator facilitates rapid dynamic simulation of wind turbines with various model variants and enables control co-design.

A major emphasis of this thesis is in the validation of the CRAFTS simulator for a 15-MW land-based wind turbine through several test cases. These test cases were collaboratively developed in conjunction with other participating research entities. CRAFTS has undergone rigorous …

Soft Robotic Arms For Fall Mitigation: Design, Control And Evaluation, Param Malhotra

All Theses

Most fall mitigation devices present a heavy system that avoid injuries to the user by preventing the impact of a fall. They are dependent on the user capability or on the probability that the user falls in the assumed manner the system was designed for. Often that is not the case, hence this project initiates a novel concept of using soft robotic arms to prevent falls from happening in the first place itself and save the user from any injuries. This thesis describes the prototype and development of a soft continuum robotic backpack system. The system can validate its use …

Estimation Of Joint Moments During Turning Maneuvers In Alpine Skiing Using A Three Dimensional Musculoskeletal Skier Model And A Forward Dynamics Optimization Framework, Dieter Heinrich, Antonie J. Van Den Bogert, Werner Nachbauer

Mechanical Engineering Faculty Publications

In alpine skiing, estimation of the joint moments acting onto the skier is essential to quantify the loading of the skier during turning maneuvers. In the present study, a novel forward dynamics optimization framework is presented to estimate the joint moments acting onto the skier incorporating a three dimensional musculoskeletal model (53 kinematic degrees of freedom, 94 muscles). Kinematic data of a professional skier performing a turning maneuver were captured and used as input data to the optimization framework. In the optimization framework, the musculoskeletal model of the skier was applied to track the experimental data of a skier and …

Modeling And Control Of A Planar Bounding Quadrupedal Robot, Patrick John Ward

Master's Theses

Legged robots have the potential to be a valuable technology that provides agile and adaptive locomotion over complex terrain. To realize legged locomotion's full abilities a control design must consider the nonlinear piecewise dynamics of the systems. This paper aims to develop a controller for the planar bounding of a quadrupedal robot.

The bounding of the quadruped robot is characterized by a simplified hybrid model that consists of two subsystems for stance and flight phases and the switching laws between the two states. An additional model, the Multibody model, with fewer simplifications, is used concurrently to best approximate real-world behavior. …

Design And Control Of Next-Generation Uavs For Effectively Interacting With Environments, Caiwu Ding

Dissertations

In this dissertation, the design and control of a novel multirotor for aerial manipulation is studied, with the aim of endowing the aerial vehicle with more degrees of freedom of motion and stability when interacting with the environments. Firstly, it presents an energy-efficient adaptive robust tracking control method for a class of fully actuated, thrust vectoring unmanned aerial vehicles (UAVs) with parametric uncertainties including unknown moment of inertia, mass and center of mass, which would occur in aerial maneuvering and manipulation. The effectiveness of this method is demonstrated through simulation. Secondly, a humanoid robot arm is adopted to serve as …

Development Of Modeling And Simulation Platform For Path-Planning And Control Of Autonomous Underwater Vehicles In Three-Dimensional Spaces, Sai Krishna Abhiram Kondapalli

Mechanical & Aerospace Engineering Theses & Dissertations

Autonomous underwater vehicles (AUVs) operating in deep sea and littoral environments have diverse applications including marine biology exploration, ocean environment monitoring, search for plane crash sites, inspection of ship-hulls and pipelines, underwater oil rig maintenance, border patrol, etc. Achieving autonomy in underwater vehicles relies on a tight integration between modules of sensing, navigation, decision-making, path-planning, trajectory tracking, and low-level control. This system integration task benefits from testing the related algorithms and techniques in a simulated environment before implementation in a physical test bed. This thesis reports on the development of a modeling and simulation platform that supports the design and …

Formation Control With Collision Avoidance For Fixed-Wing Unmanned Air Vehicles With Speed Constraints, Christopher Heintz

Theses and Dissertations--Mechanical Engineering

Advances in the miniaturization of powerful electronic components and motors, the democratization of global navigation satellite systems (GNSS), and improvements in the performance, safety, and cost in lithium batteries has led to the proliferation of small and relatively inexpensive unmanned aerial vehicles (UAVs). Many of these UAVs are of the multi-rotor design, however, fixed-wing designs are often more efficient than rotary-wing aircraft, leading to a reduction in the power required for a UAV of a given mass to stay airborne. Autonomous cooperation between multiple UAVs would enable them to complete objectives that would be difficult or impossible for a single …

Intelligent Therapeutic Robot: Design, Development, And Control, Asif Al Zubayer Swapnil

Theses and Dissertations

This research contributes to developing an Intelligent Therapeutic Robot (iTbot) designed to provide therapy to patients with upper limb impairment due to stroke, injury, and other trauma. This robot aims to implement robotic rehabilitation based on principles of motor rehabilitation and Neuroplasticity. The iTbot, as developed in this research, can provide end-effector type rehabilitation exercises in various configurations, including motion in the vertical and horizontal plane. It can provide passive, active, and active-assisted rehabilitation therapies to patients with limited upper limb mobility.

The iTbot has been designed with simplicity in mind with a minimum viability approach. With a minimum amount …

Telescope Parallel Actuator Mount: Control And Testing, Samuel S. Artho-Bentz

Master's Theses

This thesis approaches the task of designing a control system for the Parallel Actuator Mount developed by Dr. John Ridgely and Mr. Garrett Gudgel. It aims to create a base framework that directly controls the telescope and can be expanded to accept external command. It incorporates lower priced components and develops more easily approachable software with great functionality. An open-loop method for velocity control is established. Developing repeatable tests is a major focus. Testing finds the control methods developed result in velocity error of less than 5% and position error of less than 1.5% despite several mechanical issues and inaccuracies. …

Towards Real-Time Reinforcement Learning Control Of A Wave Energy Converter, Enrico Anderlini, Salman Husain, Gordon Parker, Mohammad Abusara, Giles Thomas

Michigan Tech Publications

The levellised cost of energy of wave energy converters (WECs) is not competitive with fossil fuel-powered stations yet. To improve the feasibility of wave energy, it is necessary to develop effective control strategies that maximise energy absorption in mild sea states, whilst limiting motions in high waves. Due to their model-based nature, state-of-the-art control schemes struggle to deal with model uncertainties, adapt to changes in the system dynamics with time, and provide real-time centralised control for large arrays of WECs. Here, an alternative solution is introduced to address these challenges, applying deep reinforcement learning (DRL) to the control of WECs …

Target Control Of Networked Systems, Isaac S. Klickstein

Mechanical Engineering ETDs

The control of complex networks is an emerging field yet it has already garnered interest from across the scientific disciplines, from robotics to sociology. It has quickly been noticed that many of the classical techniques from controls engineering, while applicable, are not as illuminating as they were for single systems of relatively small dimension. Instead, properties borrowed from graph theory provide equivalent but more practical conditions to guarantee controllability, reachability, observability, and other typical properties of interest to the controls engineer when dealing with large networked systems. This manuscript covers three topics investigated in detail by the author: (i) the …

Minimizing Control Circuits Using Logic Elements, R.T. Gaziyeva, A.M. Nigmatov, E.O. Ozodov

Irrigation and Melioration

In this article considered information about contact and non-contact automation. In most cases, contact automation is used in many pumping stations. These phenomena are a power surge or voltage drop. And also the use of contact automation occupies a large place and inconvenience in operation. Non- contactless automation solves these problems. Pumping stations are usually designed with the calculation of their operation without permanent duty personnel. At large stations, a small staff is provided, which primarily carries out control functions. Set the automatic operation of pumping units. Often, automatic selection of switched-on units is carried out, reserve is withdrawn, station …

Brian Valdez - Dynamics And Control Of A 3-Dof Manipulator With Deep Learning Feedback, Brian Orlando Valdez

Open Access Theses & Dissertations

With the ever-increasing demands in the space domain and accessibility to low-cost small satellite platforms for educational and scientific projects, efforts are being made in various technology capacities including robotics and artificial intelligence in microgravity. The MIRO Center for Space Exploration and Technology Research (cSETR) prepares the development of their second nanosatellite to launch to space and it is with that opportunity that a 3-DOF robotic arm is in development to be one of the payloads in the nanosatellite. Analyses, hardware implementation, and testing demonstrate a potential positive outcome from including the payload in the nanosatellite and a deep learning …

Optimal Mission Planning Of Autonomous Mobile Agents For Applications In Microgrids, Sensor Networks, And Military Reconnaissance, Casey D. Majhor

Dissertations, Master's Theses and Master's Reports

As technology advances, the use of collaborative autonomous mobile systems for various applications will become evermore prevalent. One interesting application of these multi-agent systems is for autonomous mobile microgrids. These systems will play an increasingly important role in applications such as military special operations for mobile ad-hoc power infrastructures and for intelligence, surveillance, and reconnaissance missions. In performing these operations with these autonomous energy assets, there is a crucial need to optimize their functionality according to their specific application and mission. Challenges arise in determining mission characteristics such as how each resource should operate, when, where, and for how long. …

Physical Controllers Vs. Hand-And-Gesture Tracking: Evaluation Of Control Schemes For Vr Audio Mixing, Justin Bennington

Audio Engineering Theses

Alternative control schemes for affecting the characteristics of audio signals have been designed and evaluated within the audio research community. The medium of virtual reality (VR) presents a unique method of sound source visualization using a headset which displays a virtual environment to the user, allowing users to directly control sound sources with minimal intermediary interference with a variety of different controllers. In order to provide insight into the design and evaluation of VR systems for audio mixing, the differences in subject preference between physical controllers and hand-and-gesture detection controls were investigated. A VR audio mixing interface was iteratively developed …

Comparison Of Lqr And Lqr-Mrac For Linear Tractor-Trailer Model, Kevin Richard Gasik

Master's Theses

The United States trucking industry is immense. Employing over three million drivers and traveling to every city in the country. Semi-Trucks travel millions of miles each week and encompass roads that civilians travel on. These vehicles should be safe and allow efficient travel for all. Autonomous vehicles have been discussed in controls for many decades. Now fleets of autonomous vehicles are beginning their integration into society. The ability to create an autonomous system requires domain and system specific knowledge. Approaches to implement a fully autonomous vehicle have been developed using different techniques in control systems such as Kalman Filters, Neural …

Modeling Of Thermal Dynamics In Chevrolet Volt Gen Ii Hybrid Electric Vehicle For Integrated Powertrain And Hvac Optimal Operation Through Connectivity, Nehal Doshi

Dissertations, Master's Theses and Master's Reports

Integrated thermal energy management across system level components in electric vehicles (EVs) and hybrid electric vehicles (HEVs) is currently an under explored space. The proliferation of connected vehicles and accompanying infrastructure in recent years provides additional motivation to explore opportunities in optimizing thermal energy management in EVs and HEVs with the help of this newly available connected vehicle data. This thesis aims to examine and analyze the potential to mitigate vehicle energy consumption and extend usable driving range through optimal control strategies which exploit physical system dynamics via controls integration of vehicle subsystems.

In this study, data-driven and physics-based models …

System Dynamics And Control, Benjamin Liaw

Open Educational Resources

Model development with applications to mechanical engineering systems. First and higher order system responses. Laplace transform, transfer functions and block diagrams. Frequency response and vibration. Introduction to feedback control. Concepts of PID control, tuning and compensation. Routh-Hurwitz stability. Control analysis and design using various graphical methods such as root locus, Bode diagram, Nyquist plot and Nichols chart. Hands-on experiments include dynamics and controls of mechanical, servo motor, fluid level/flow, pneumatic and temperature processing systems and vibration of various degree-of-freedom systems.

Visual Servoing For Multirotor Precision Landing In Varying Light Conditions, Jesse Wynn, Tim Mclain

Faculty Publications

The problem of performing a precision landing of an autonomous multirotor UAV in various lighting conditions is studied. A vision-based approach is proposed and consists of varying degree-of-freedom image-based visual servoing (VDOF-IBVS), and a specialized landing marker. The proposed approach is validated through extensive flight testing outdoors in both lighted and dark conditions, and is done using a standard off-the-shelf autopilot system.

Performance Control Of A Spray Passive Down-Draft Evaporative Cooling System, Daeho Kang, Richard K. Strand

Publications and Research

A spray passive down-draft evaporative cooling system has been regarded as a low-energy cooling system that leads significant energy savings in the cooling of buildings. While the energy saving capability of the system has been proven, the ability to control a comfortable indoor environment is still inadequate due to strong climatic dependency. This study seeks viable solutions to advance the control competence of the system by mitigating critical problems of the system to be a reliable cooling application in the cooling of buildings. It proposes potential control strategies for the system and alternative operations. It develops a control algorithm for …

Ball Oscillating Bouncer, Eric Blok, Daniel Altemese, Ryan Nowacki, Maram Qurban

Williams Honors College, Honors Research Projects

The purpose of this report is to document the need, objectives, marketing and engineering requirements, as well as validate the design of an autonomous control device capable of continuously bouncing a table tennis ball on a paddle. This includes the design of a self correcting system using lightweight materials, and as few sensors and components as possible to achieve a compact, portable design. To accomplish this, the system is designed to react to a ball falling from as short a distance as 10 centimeters above the paddle, meaning all sensor processing, control processing, and motor drives should be able to …

Model Predictive Power Management Of A Hybrid Electric Propulsion System For Aircraft, Tyler J. Wall

Masters Theses

This work presents the switched optimal power flow control for an aircraft with a hybrid electric propulsion system. The propulsion system is a switched system that operates in either of two modes: (i) battery discharging and electric motor propelling and (ii) battery charging and electric motor generating. The aircraft model and components that form the hybrid propulsion system are modeled as either an algebraic power source/sink or as a dynamic model with appropriate power and state interconnections. With the system model defined, a model predictive control power management strategy is set fourth which minimizes a performance index that includes altitude …

Cyber-Physical System Characterization And Co-Regulation Of A Quadrotor Uas, Seth E. Doebbeling

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

An Unmanned Aircraft System (UAS) is a Cyber-Physical System (CPS) in which a host of real-time computational tasks contending for shared resources must be cooperatively managed to obtain mission objectives. Traditionally, control of the UAS is designed assuming a fixed, high sampling rate in order to maintain reliable performance and margins of stability. But emerging methods challenge this design by dynamically allocating resources to computational tasks, thereby affecting control and mission performance. To apply these emerging strategies, a characterization and understanding of the effects of timing on control and trajectory following performance is required. Going beyond traditional control evaluation techniques, …

Prototype Vehicles Laboratory Steering Apparatus, Zachary W. Sharpell, Jorge Lopez, Colby R. Genasci

Mechanical Engineering

The Cal Poly Prototype Vehicles Team (PROVE) is designing a solar powered vehicle to break an international land speed record. The space within the driver’s cockpit allotted for the steering mechanism was too small for a conventional steering wheel. This report describes the process that was followed to design, manufacture, and test a compact and lightweight steering apparatus for the PROVE solar vehicle. A lateral lever steering system, the final design selected for PROVE’s solar car, was designed to withstand the maximum expected loads applied by the driver during the three-minute run of the competition. The lateral lever steering apparatus …

Applications Of Relative Motion Models Using Curvilinear Coordinate Frames, Alex C. Perez

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A new angles-only initial relative orbit determination (IROD) algorithm is derived using three line-of-sight observations. This algorithm accomplishes this by taking a Singular Value Decomposition of a 6x6 matrix to arrive at an approximate initial relative orbit determination solution. This involves the approximate solution of 6 polynomial equations in 6 unknowns. An iterative improvement algorithm is also derived that provides the exact solution, to numerical precision, of the 6 polynomial equations in 6 unknowns. The initial relative orbit algorithm is also expanded for more than three line-of-sight observations with an iterative improvement algorithm for more than three line-of-sight observations. The …

Investigation Of Extremum Seeking Control For Adaptive Exercise Machines, Brahm T. Powell

ETD Archive

Many muscle rehabilitation regimens are non-adaptive and recommended subjectively by physicians. While there are advantages to having the feedback of a qualified physician, utilizing real-time muscle performance feedback could be beneficial. An extremum seeking control design is proposed to fulfill the need for an automated, load-varying exercise machine that can optimize muscle performance.

Several steps are outlined to contribute to the realization of this goal. First, the extremum seeking control scheme is discussed. Second, the Hill muscle model will be described. Theoretical muscle effort extrema will be derived for selected optimization cases, namely maximizing average squared power by varying load …

Electromagnetic Signal Feedback Control For Proximity Detection Systems, Adam K. Smith

Dissertations, Master's Theses and Master's Reports

Coal is the most abundant fossil fuel in the United States and remains an essential source of energy. While more than half of coal production comes from surface mining, nearly twice as many workers are employed by underground operations.

One of the key pieces of equipment used in underground coal mining is the continuous mining machine. These large and powerful machines are operated in confined spaces by remote control. Since 1984, 40 mine workers in the U. S. have been killed when struck or pinned by a continuous mining machine. It is estimated that a majority of these accidents could …