Digital Commons Network^™

3-In-1 Medical Lancet, Jonathan J. Panella, Gage Vogtlin, Marissa Koski, Benjamin Neyland

Mechanical Engineering

First responders need a quick, sterile, and convenient way to sample blood for glucose testing because glucose levels are a vital metric in assessing time-critical emergency situations. The blood sampling process consists of pre-sterilizing the sample site on the skin with an alcohol pad, pricking the skin with a lancet, and lastly, after sampling, putting a bandage over the prick site. The scope of this project is to design a device which integrates and streamlines the use of the three sub-processes (sterilization, lancing, and bandaging) while upholding the necessary requirements of a single-use medical device and considering other factors which …

Characterizing Direction Specific Ganglion Cell Receptor Activation Using A Perturbation Based Decomposition Method, Camila Paola Monchini Moline

Master's Theses

Characterizing postsynaptic current signals in the retina by neuroreceptor activation frequency is important for studying the mechanism of action behind phototransduction of varied visual stimuli. A better understanding could in turn lead to the creation of methods for early detection and prevention of debilitating optical neuropathies, such as glaucoma, age-related macular degeneration, and retinitis pigmentosa. More recent in-vitro and in-vivo studies have aimed to differentiate the effects of various neurotransmitters, such as acetylcholine, GABA, and glutamate, on receiving and processing different types of visual stimuli from the retina into the visual cortex.

The focus of this work will be to …

A Design Build Company’S Pain Points For Field Staff Working Outside Of A Company’S Home Area, Mason Barber

Construction Management

Design-Build is the project-delivery system of the future but is not without pain points. The Design-Build system is an efficient form of project delivery that has a strong focus on relationships and can begin the construction phase while the design phase is still active. This study aims to identify and analyze the additional challenges or pain points that arise when Design-Build construction is taking place in an unfamiliar location and distant from the company office. The pain points are identified with field staff feedback through the form of survey responses. This study uses The Neenan Company as an example because …

Exploring The Relationships Between Gpa, Gender, Internship Participation, And Familial Influence In Salary And Salary Growth Of Construction Management Alumni, Kyra Leigh Glaus

Construction Management

College students seek to make themselves desirable to employers upon graduation, and employers use subjective and objective information to determine the best applicants. This study aims to survey the factors of college GPA, gender, internship experience, and familial influence and independently explore their relationship to career success as measured by starting salary and salary growth. A convenience sample was collected from construction management graduates from California Polytechnic State University, San Luis Obispo. The data for this sample found higher starting salaries for respondents who reported having higher GPAs, being female, having completed more internships, and who had an immediate family …

City Of Guadalupe Cultural Arts & Education Center Veterans Memorial Wall, Alejandra Arroyo Perez

Construction Management

As a student in Construction Management, the importance of firsthand experience in the construction industry should not be taken lightly. The responsibility of every construction manager is to learn how to take a project from concept to reality. The primary five elements of construction management entail project programming, design development, material specifications, estimating, and scheduling. This paper documents the construction management process related to a Veterans Memorial Wall. Through coordination with the project stakeholders (i.e. property owners, engineer consultants, material fabricators, and vendors) a fully immersive construction management experience is gained. One of the stakeholder requirements was to establish a …

W22 Landing Gear And Door Uplocks Final Design Review (Fdr), Jason Szeto, Garrett Donovan, Christopher Edward, Kevin Lee

Mechanical Engineering

This Final Design Review report outlines the senior project sponsored by General Atomics Aeronautical Systems, Inc., to design an unmanned aerial vehicle landing gear uplock and door locks. The main goal of the project is to create a proof-of-concept uplock that does not operate on hydraulic power, has minimal moving parts, and can support the weight, vertical acceleration and aerodynamic loads on the landing gear or doors. The document covers the background research, design specifications, design selection process, justifications, manufacturing, and verification of the functional prototype.

Coilreef™ Wave Energy Dissipation Project, Cole Ramsdale, Josh Sparrow, Kyle Archibald, Fernando Romero

Mechanical Engineering

Within this Final Design Review (FDR) report, the COILReef™ Senior Project concludes with all updates reflecting results after testing. The COILReef™ is a device ideated by Cal Poly Professor Roger Benham. It aims to provide a removeable, low-cost solution to dissipating ocean wave energy, thereby reducing coastal erosion in sensitive areas. Current permanent solutions cost millions of dollars, take years to construct, and sometimes produce undesirable and unintended effects. The work presented in this document provides the foundational research, testing, and steps taken by the team to evaluate the feasibility of the COILReef™ design as a viable solution to reducing …

Automated Mini-Tubular Ceramic Production, Hunter Brooks, Daniel Freeman, Leo Taranta-Slack

Mechanical Engineering

Researchers at Lawrence Livermore National Laboratory need a way to increase the rate of manufacturing of mini-tubular ceramics to be used in testing particulate air filters. This document outlines our process from researching and writing an initial scope of work all the way to fabricating and testing a final prototype. This journey takes us through the background research, ideation process and selection of a final design. We also detail the desired engineering specifications and our concept selection process. We dedicate a significant portion of this report to discussion of our final design. We delve into how it was manufactured as …

Break The Ice Challenge, Peter Karkos, Alex Lewis, Eva Kouyate, Vy Han

Mechanical Engineering

The report documents and justifies team LEGION’s senior design project, from research and ideation to prototype manufacturing and testing. It begins by providing some background on the project and outlining the mission scenario given by NASA. This is followed by related literature on excavation of icy regolith on the moon, water transportation, lunar environment, and space law. Next, research is performed into existing products, such as patents and various designs from previous related NASA competitions.

After providing the relevant background information, focused objectives are outlined, with a problem statement, boundary sketch, and engineering specifications. The wants & needs of NASA …

Gaf Fiberglass Mat Slitter Blade Sharpener, Mark D. Breaux, Bradley M. Smith, Esteban Carrillo, Carlos Espinoza

Mechanical Engineering

This document contains an overview for the offline slitter blade sharpening system created for GAF to sharpen their current cutting tools in a timely and safe manner without hindering the timeline and production of their assembly line. This design was developed by four undergraduate students at from Cal Poly, San Luis Obispo. This document first investigates background information of any patents, current sharpening device, sharpening safety standards, or literature review that may be useful in a sharpening mechanism device. This document also contains our design concept prototype, which consists of three main features, the use of a top guard for …

Gaylord Produce Removal Machine, Marcus Takashi Hirose Lee, Jacob Michael Perlman, Carissa Abigail Kamm, Mark Misao Loera

Mechanical Engineering

This Final Design Review Report outlines the senior design project that began Winter Quarter of 2021 at California Polytechnic State University. Our team consists of three mechanical engineers and a general engineer, working together to design, build, and test a product for Alameda County Food Bank. The goal of the final product is to relieve volunteers and employees of tedious manual labor and increase efficiency during the removal of produce from large Gaylord containers. This document describes background research, the objectives of the project, chosen concept design, analysis and initial prototyping of said concept, the final design, and verification prototype …

Produce Sorting Aid, Annica Navarro, Jessie Boucher, Natalie Roberts, Teng Lee

Mechanical Engineering

This Final Design Review (FDR) document intends to define the details of the Produce Sorting Aid senior project–selected by four mechanical engineering students, working under the team name Team W24. The Alameda County Community Foodbank (ACCFB) sorts bulk produce into bags or boxes for distribution to people in need of food. However, the current process is not ergonomic, time efficient, or safe for the volunteers at the ACCFB. The scope of the senior project is to design a mechanism that is ergonomic, time efficient, and safe for the volunteers to lift heavy produce and distribute the produce into bags ready …

Mug For Veterans With Tremors, Eliot Daniel Briefer, Nicholas Michael Greco, Lucas Paul Martos-Repath, Tiernan Lif Kehoe

Mechanical Engineering

This Final Design Review Report outlines the senior design project completed by a team of mechanical engineering students attending California Polytechnic State University, San Luis Obispo for the McGuire Veterans Affairs Medical Center in Richmond, VA. The scope of the project was to design, build, and test a device for veterans with tremors that would allow them to enjoy their favorite drinks comfortably and easily, without worrying about spills. The final product must be lightweight, aesthetic, capable of handling various tremor types, and can be operated in multiple planes to allow the veterans full control over the device. This document …

Compact In-Rack Dielectric Immersion Cooling System, Salvador Landeros Jr, Joshua M. Hannaman, Marshall D. Reid

Mechanical Engineering

The Compact Dielectric Cooling team consisting of Josh Hannaman, Marshall Reid, and Salvador Landeros worked with Aria Technologies to create a thermal management system for data centers that can easily implement liquid cooling into current infrastructure for high density computing servers. The project was to design, build, and test a compact immersion cooling system for a senior project at California Polytechnic State University – San Luis Obispo. Immersion cooling is a liquid-cooling process that involves the immersion of electrical IT equipment and the removal of heat from the hot IT components using dielectric liquid. The goal was to build a …

Optimized Tip Cooling Using Am Process, Alberto H. Gamez, Lourdes Sarmiento Martinez, Andrew Van Bogelen

Mechanical Engineering

This Final Design Review (FDR) reports on the senior design project undertaken by our team of mechanical engineering seniors at California Polytechnic State University, San Luis Obispo. This project seeks to use the additive manufacturing process to improve the existing design of a Taurus 60 gas turbine injector tip. The current injector tip is owned by Solar Turbines, a designer and manufacturer of gas turbines for electric generation, propulsion, as well as natural resource transportation. The challenge at hand is to design a new injector tip that will be reliable for at least 60,000 hours and provide ease of replacement, …

Analyzing The Gender Gap In Field Positions On Commercial Construction Projects, Adriana L. Frazier

Construction Management

The percentage of women working in the construction industry is on the rise. However, most women working in the construction industry often fill administrative roles, office positions, and project management roles rather than field positions such as tradeswomen, foremen, or superintendents. According to the United States Bureau of Labor Statistics, as of 2020, women constitute 10.9 percent of the entire construction industry. Specifically, 86.7 percent of those women are in office positions with only 3.5 percent of women in trade positions. Those numbers signify that the construction industry is not benefitting from women in field positions. That is due to …

Bathroom Remodel For Son Care Foundation, Inc., Tae Hun Kwak

Construction Management

The purpose of this paper is to provide insight into the process of remodeling a 42 SF bathroom for Son Care Foundation, Inc. The initial scope included the removal of an existing fiberglass bathtub, plumbing work, drywall installation, mudding, drywall texturing, new flooring, a new toilet, and a new sink. During construction, the owner requested that I add paint, an ADA-compliant sink, a new lighting fixture, a new vinyl baseboard, a new mirror, a new cabinet, new door trim, and new door hardware as part of my scope. I used what I learned in class to solve problems during the …

Development Of A Topics Course For Construction Law, Julia C. Hoever

Construction Management

The Cal Poly Construction Management program is designed to prepare students heading into the construction industry for daily management tasks. With construction comes many legal aspects integrated into a project’s operations. Though the curriculum includes a contract law course, a gap exists with a minimal number of classes that address the array of legal matters the construction industry must be versed in. Working with faculty member, Thomas Kommer, J.D., there is a need for a course that expands on these varying legal topics. In order to determine the specific topics that would impactfully benefit and educate Cal Poly Construction Management …

Analysis Of Self-Consolidating Concrete In Architectural Shear Wall Applications: Case Study, Peter Finocchio

Construction Management

Architectural concrete surfaces have always been a point of focus for concrete contractors, architects, and owners, especially when consolidation poses risks due to a high density of reinforcement. Contractors have begun using self-consolidating concrete (SCC) in exposed vertical applications to combat the risk of poor consolidation. This paper investigates the characteristics of SCC and evaluates a case study of a recent project that was completed on the Central Coast of California. The study examines the cost variance between using SCC mix and a standard mix in architectural shear walls. The analysis is done by evaluating a multi-story Type 1A structure …

Campus Improvement Cm460 Manual To Improve Project Based Success, John C. Palmer

Construction Management

This Senior project research will critically assess the process for campus improvement on the Cal Poly Campus. The purpose of this research is providing a final deliverable that is a usable document for future students with the intention of creating a campus improvement project. The project includes the necessary resources such as campus facility contacts, permitting process explanation, the documentation process for preconstruction, funding opportunities and the expected delays to create a realistic plan. The document is created as a manual for Construction Management undergraduates in hopes of encouraging future students to create a project-based campus-improvement plan that is more …

Effects Of Cal Poly Construction Management Software Curriculum On Graduate Employment Choices, Andrew Holland

Construction Management

As technology continues to advance at an accelerated pace, the construction industry struggles to keep up with these rapid changes. Understanding and adopting new technologies, specifically software, are key to the future of the construction industry. Studies have shown that the slow adoption of software in the industry has more to do with a lack of training than the limitations of the software. New hires out of universities with experience and training in these software are the linchpin to adapting this industry to new technology. The Construction Management Department at Cal Poly is renowned for putting out new hires with …

Caed Support Shop Concrete Slab, Nathan Horst, Steven Zheng

Construction Management

This senior project paper will explore the history, background, process, and challenges encountered while constructing a dream project for the Cal Poly CAED Support Shop during the Summer of 2021. From the initial site survey, through the design and permitting process and the physical construction, this project truly encapsulated the “learn-by-doing” philosophy. The project was successful in constructing a final product that enables ADA wheelchair access, creates more useable project work area, as well as addresses drainage issues and provides underground electrical conduits for future electrical upgrades.

Hybrid: The Future Of Construction Meetings In The Digital Age, Nicholas G. Orozco

Construction Management

Over the last few years, many construction companies have had to upheave traditional methods of construction meetings to adapt to rapidly changing COVID-19 safety and regulation protocols. For many, this has meant taking common in-person meetings (OAC, pre-construction, and design) and shifting them virtual. As companies continue to move forward in a post-pandemic climate, the question of whether they will continue with virtual meetings or revert to in-person meetings still lingers in the air. To get a better read on the future of construction meetings post-pandemic, a survey was sent to determine what most people prefer. A total of 21 …

Sustainability In Commercial Office Buildings, Jack Cullen

Construction Management

Sustainability in the construction of commercial structures has been expanding through the recent years, largely in part due to the increasing ambitions to maintain a green and healthy planet. Regulations for including sustainable features in new or renovated commercial buildings have been growing throughout the country. In fact, many prospective buyers and lessees are even adding sustainable features to the list of what they look for in a potential place to buy or rent. This report will explore whether or not a building’s sustainable aspects appeal to buyers and lessees of commercial buildings, and if these sustainable aspects contribute to …

Granulated Blast Furnace Slag And Its Effects On Concrete Mixes, Adam Jacobson

Construction Management

This paper explores what place slag, or granulated blast furnace slag has in our changing environment and evaluates how it compares to Portland cement. The purpose of this research is to discern how slag will be applicable in the future of construction and find what place it will have in concrete mixes. Slag is a Supplementary Cementitious Material (SCM) that is being utilized in more and more concrete applications due to its desirable properties and low environmental impact. Slag also reduces the amount of CO2 released that is produced in manufacturing and placing concrete. In this research, compressive strength of …

The Benefits Of Utilizing Qr Codes On Construction Jobsites To Conduct Punch, Jack Richard Stryker

Construction Management

The punch process of construction is an important task that a construction project team is faced with before a project reaches final completion. A punch list documents and tracks items that need to be corrected, repaired, or are incomplete. If not closely managed, open punch items can drag out the completion of a project, and is often seen as a tedious task for project engineers. The industry has not seen much change as to how this process is conducted until recent advancements in construction software. This paper will take a deeper look into the benefits seen from utilizing Procore’s location-based …

Summer Construction Bootcamp Building Activities, Ashley Leeann Isla

Construction Management

This paper outlines the trade-specific building activities that will take place at Cal Poly’s Summer Construction Bootcamp in Summer, 2022. The four construction trades that will be highlighted at the camp are concrete, carpentry, sheet metal, and plumbing. During each day, campers will build a small project that aligns with each highlighted construction trade. During the concrete day, campers will create stepping stones and perform a cylinder break test; during carpentry, campers will compete in a wall framing exercise; for sheet metal, campers will construct sheet metal roses; and for plumbing, they will make copper pipe “CPs.” This paper describes …

The Causes Of Electrical Labor Shortages Within Central California, Madeline S. Brogno

Construction Management

Labor shortages within various trades in the construction industry have become a prominent issue throughout the world for decades. The negative effects due to lack of manpower affect construction personnel ranging from general contractors to manufacturers who are finding themselves struggling as many subcontractors are having to turn down work, which in turn affects general contractors timelines in projects- extending durations, and increasing costs. There has been general research done that has provided some insight, suggesting the root cause be attributed to the baby-boomer generation retiring, or a general lack of interest in the industry. This research paper on labor …

Paso Robles Police Department Shooting Range Electrical Installation, Shelby I. Prosch

Construction Management

The Paso Police Department has a shooting range for police officers to practice and master using firearms. A shooting range is a crucial part of police officer training to ensure public safety and correct and accurate usage of safety weapons. The construction for the shooting range began in the spring of 2021 by Cal Poly students where they laid the foundation. I became involved to further the progress of the shooting range by installing an electrical system. For that phase to begin, I completed a pre-construction package that details the materials and steps for installation. The package includes a scope …

Protecting The Caed Shop Equipment Yard, Chloe K. Stevens

Construction Management

Anytime a construction project is considered, there is a lengthy process that happens before breaking ground. It is important to consider the environment around the project, the intended purpose and use of the space, and the materials, time, and budget needed to develop it. If you do not take these things into consideration correctly, it will negatively impact the functionality and the efficiency of both the use and the construction process. This project consists of creating a pre-construction plan for building out a weather protective and space efficient enclosure at the College of Architectural and Environmental Design Shop Yard. The …