Open Access. Powered by Scholars. Published by Universities.®
- Institution
Articles 1 - 17 of 17
Full-Text Articles in Entire DC Network
Late Pleistocene Sedimentary Features And The Palaeoclimatic Background In Hongsibao Basin, Li Zhenhong, Cui Jiawei, Li Chaozhu, Jiang Boyu, Huang Ting
Late Pleistocene Sedimentary Features And The Palaeoclimatic Background In Hongsibao Basin, Li Zhenhong, Cui Jiawei, Li Chaozhu, Jiang Boyu, Huang Ting
Coal Geology & Exploration
The chuck is an important part of the coal mine tunnel drilling rig. The performance of the chuck directly affects the efficiency and quality of drilling. Aiming at the problems of the rubber cylinder hydraulic chuck. a new radial piston hydraulic chuck is studied. The objective of this paper is to devise a new radial piston hydraulic chuck instead of rubber-sleeve hydraulic chuck. Then, the motion mathematical model of radial piston hydraulic chuck was established based on the radial piston chuck clamping and loosening of system structure and working principle. At the same time, a dynamic co-simulation of chuck hydraulic …
Mathematical Modeling Of A Ball Mill In Gmz-2 Ngmk Based On The Diffusion Model, Y.B. Kadirov, S.B. Boybutayev, A.R. Samadov
Mathematical Modeling Of A Ball Mill In Gmz-2 Ngmk Based On The Diffusion Model, Y.B. Kadirov, S.B. Boybutayev, A.R. Samadov
Chemical Technology, Control and Management
In the mining and metallurgical industry, in addition to raw materials, the quantitative volume of technological operations has a significant impact on the cost of the extracted metal. As practice shows, the most energy-intensive process is crushing of rocks, which accounts for 30-50% of all production costs. In this connection, the management of this process is one of the main technical and economic factors in the chain of rock dressing. In this paper, the mathematical function of the ball mill MSHTs 75x55 is derived, on the basis of which a computer model is built in the SIMULINK subsystem of the …
Improvement Of Electromagnetic Flow Meters For Aggressive Liquids, A.O. Ataullaev, N.O. Ataullaev
Improvement Of Electromagnetic Flow Meters For Aggressive Liquids, A.O. Ataullaev, N.O. Ataullaev
Chemical Technology, Control and Management
The model developed electromagnetic flow sensors with ring channels and alternating magnetic poles alternately in a three-dimensional approximation and the results of a study of their static characteristics. It was shown that due to the formation in the pipeline system with alternating magnetic poles is substantially increased channel length of the active zone of the sensor, thereby improving sensitivity of measurement. Found that the positive effect, i.e. fuller use of the cross-sectional area of the pipeline in the area of the electrodes is especially pronounced in the flow sensor with a diameter of 150 mm pipeline. It was found that …
Simulation And Experimental Study On Dynamic Characteristics Of Radial Piston Hydraulic Chuck, Liang Chunmiao, Yao Ningping, Yao Yafeng, Li Kun, Peng Tao, Song Haitao
Simulation And Experimental Study On Dynamic Characteristics Of Radial Piston Hydraulic Chuck, Liang Chunmiao, Yao Ningping, Yao Yafeng, Li Kun, Peng Tao, Song Haitao
Coal Geology & Exploration
The chuck is an important part of the coal mine tunnel drilling rig. The performance of the chuck directly affects the efficiency and quality of drilling. Aiming at the problems of the rubber cylinder hydraulic chuck. a new radial piston hydraulic chuck is studied. The objective of this paper is to devise a new radial piston hydraulic chuck instead of rubber-sleeve hydraulic chuck. Then, the motion mathematical model of radial piston hydraulic chuck was established based on the radial piston chuck clamping and loosening of system structure and working principle. At the same time, a dynamic co-simulation of chuck hydraulic …
Development Of The Optimal Design Of A Cyclone Apparatus With A Fluidized Bed For The Process Of Metals Pneumatic Separation In The Composition Of Industrial Waste, N. R. Yusupbekov, B. I. Yunusov, Sh. M. Gulyamov, I. I. Yunusov, F. A. Kasimov
Development Of The Optimal Design Of A Cyclone Apparatus With A Fluidized Bed For The Process Of Metals Pneumatic Separation In The Composition Of Industrial Waste, N. R. Yusupbekov, B. I. Yunusov, Sh. M. Gulyamov, I. I. Yunusov, F. A. Kasimov
Technical science and innovation
Recycling of techno genic waste accumulated in recent years in Uzbekistan is currently a pressing problem. In this regard, this paper examines the issue of studying the process of enrichment of man-made waste in a cyclone with a fluidized bed. To conduct the experiment on experimental advanced devices with extended zones five types of samples of techno genic waste with the limits of 0.072÷0.078mm, 0.064÷0.070mm, 0.057÷0.063mm, 0.046÷0.055mm and 0.041÷0.044mm have been prepared. Nomograms have been obtained using mathematical models to determine particle size limits, which ensure good separation. Experiments have been carried out on the separation of techno genic waste …
Increasing Calibration Accuracy Of The Humidity Control Measuring Device Of Bulk Materials, E. Uljaev, Sh.N. Narzullaev, S.M. Erkinov
Increasing Calibration Accuracy Of The Humidity Control Measuring Device Of Bulk Materials, E. Uljaev, Sh.N. Narzullaev, S.M. Erkinov
Technical science and innovation
For increasing accuracy of a measuring device, before carrying out measurement, implementation of graduation, which consists of the establishment of correlation dependence between indications of the measuring device and humidity of specific material, is required. For the creation of calibration dependence of the developed measuring device as the measured 10 test samples of ammonium nitrate (nitrogen) with humidity from 0% to 2.5%, with different intervals are selected. For determination of the humidity content of ammonium nitrate, it is measured the dependence of the frequency on the humidity content of the sample. For each test, several values of frequencies of the …
Modeling And Simulation Of Urination Assist System Driven By Ultrasonic-Vaporized Steam, Li Xiao, Huaizhou Zhou, Zhichao Shi, Ting Guan, Yuansong Xiao
Modeling And Simulation Of Urination Assist System Driven By Ultrasonic-Vaporized Steam, Li Xiao, Huaizhou Zhou, Zhichao Shi, Ting Guan, Yuansong Xiao
Journal of System Simulation
Abstract: Aiming at the problem of assisting the neurogenic bladder micturating, a novel urination assist system driven by ultrasonic-vaporized steam was proposed. The mathematical model of the multi-field coupling relation between the external ultrasonic controlling parameters and the urine flow rate of urinary bladder was built using ultrasonics, thermodynamics and fluid mechanics theories. The simulation analysis of the influence of the controlling parameters on the urine flow rate performance of the system was conducted. The results show that the urine flow rate are mainly affected by the ultrasonic sound intensity, frequency, radiation area and time, as well as the system …
Structural – Parametric Analysis And Synthesis Of Glass Furnace Condition Observer, Utkir Uktam O‘G‘Li Kholmanov
Structural – Parametric Analysis And Synthesis Of Glass Furnace Condition Observer, Utkir Uktam O‘G‘Li Kholmanov
Chemical Technology, Control and Management
A modified Kalman filter of the glass cooking process is synthesized, taking into account perturbations in the form of a sequence of colored noises. The possibility of expanding this filter by noise filters to improve functioning in the presence of low-frequency disturbances is studied and a corresponding estimation scheme with additional noise filters is proposed. The results of the simulation allow us to assume that low-frequency disturbances in the glass furnace act at the input and affect the state of the control object.
Mathematical Model Of Maneuvering Motion And Virtual Simulation For Ultra Large Twin-Propeller Twin-Rudder Ship, Guo Chen, Yan Lifei, Haiqing Shen
Mathematical Model Of Maneuvering Motion And Virtual Simulation For Ultra Large Twin-Propeller Twin-Rudder Ship, Guo Chen, Yan Lifei, Haiqing Shen
Journal of System Simulation
Abstract: A three-degree freedom mathematical model of maneuvering motion for an ultra-large type container ship with twin-propeller twin-rudder is established, with turning circle test and zig-zig test simulation results to verify it. By abstracting the ship maneuvering process, the three-dimensional model of ship, helm, propeller and rudder are modeled according to virtual reality technology, and then the ship posture and the dynamic process of ship maneuvering are displayed by the virtual scene and the responsive three-dimensional model. A virtual simulation system for the maneuvering of ultra large twin-propeller twin-rudder ship is established by the MFC framework and the …
Simulation Analysis Of Virtual Platform Of Close-Coupling Multiple Robots Combined Lifting System, Su Cheng, Yanlin Wang, Jitao Liu, Zhigang Zhao
Simulation Analysis Of Virtual Platform Of Close-Coupling Multiple Robots Combined Lifting System, Su Cheng, Yanlin Wang, Jitao Liu, Zhigang Zhao
Journal of System Simulation
Abstract: A framework of virtual simulation platform of close-coupling multiple robots combined lifting system was constructed. The model of the multiple robots system was established based on UG. The mathematical model of the mobile robot and the static equilibrium equation of the operated object was established. A collaborative control simulation system was set up based on ADAMS and MATLAB closed loop. In close-coupling multiple robots combined lifting system, according to two different trajectory planning, calculating draw of the mathematical model and the co-simulation model output curves were compared and analyzed to verify the correctness of the mathematical model of the …
Autonomous Flight Control And Simulation Study Of Independent Developed Soft-Wing Uav, Juntong Qi, Jinda Liu, Shang Hong, Liying Yang, Mei Sen, Jianda Han
Autonomous Flight Control And Simulation Study Of Independent Developed Soft-Wing Uav, Juntong Qi, Jinda Liu, Shang Hong, Liying Yang, Mei Sen, Jianda Han
Journal of System Simulation
Abstract: Soft-wing UAV is composed of ram air parafoil hanging powered vehicle with ropes. The special structure of soft-wing UAV makes it possess apparent mass, flexible structure and relative motions, which are the difficulties of modeling and controlling of soft-wing UAV. Autonomous flight controller design method based on mathematical model can low-costly and high-efficiently achieve control algorithms for UAV. Based on the physical parameters of the self-designed soft-wing UAV, a 6 DOF mathematical model was built. A flight controller and visual simulation system was designed. By using the trajectory points simulation, the numerical and visual simulation was synchronously realized which …
Research On Magnetic Device Model Of Nonlinear Inductance Combined With Transformer And Inductor, Hongzhu Li, Jiayue Sun, Qingjie Qi, Wang Qiao
Research On Magnetic Device Model Of Nonlinear Inductance Combined With Transformer And Inductor, Hongzhu Li, Jiayue Sun, Qingjie Qi, Wang Qiao
Journal of System Simulation
Abstract: A modeling method of magnetic device combining transformer and inductance was put forward. The modeling method reflects characteristics of magnetic and electric circuit simultaneously, and reflects parasitic parameters with capacitance. And the physical concepts of parameters are clear in the model. The interface model reflecting magnetic and electric circuit was established through ideal transformer based on electromagnetic theory, and nonlinear inductance simulation model reflecting hysteresis effect through derivation was obtained. The hysteresis loop of inductance actual simulation and that from magnetic core manual agreed well, proving the correctness and effectiveness. By modeling method in the proposed magnetic device, coupling …
Mathematical Modeling Of Thermal Processes Of Traction Asynchronous Engines For Diagnosis And Control Of Their Technical Condition, Nilufar Rabbanaqulovna Avezova, Javharbek Sulton Ugli Fayzullayev
Mathematical Modeling Of Thermal Processes Of Traction Asynchronous Engines For Diagnosis And Control Of Their Technical Condition, Nilufar Rabbanaqulovna Avezova, Javharbek Sulton Ugli Fayzullayev
Chemical Technology, Control and Management
Mathematical models of thermal processes of traction asynchronous motors are developed. A traction asynchronous motor is considered as a thermal system consisting of three bodies (stator winding, stator magnetic core and rotor), which take into account the heat exchange not only between the corresponding bodies, but also the heat exchange between each body and the environment. It is shown that the steady excess of the stator winding temperature of a traction asynchronous motor depends on the multiplicity of the stator winding current, the coefficient of electrical energy loss, and also on the temperature coefficient of the resistance of the winding …
Study Of The Influence Of An Alternating Magnetic Field On The Operation Of A Current Converter On The Magnetomodulation Effect, Abdurauf Malikovich Safarov, Sarvarbek Khamrayevich Jumaboyev
Study Of The Influence Of An Alternating Magnetic Field On The Operation Of A Current Converter On The Magnetomodulation Effect, Abdurauf Malikovich Safarov, Sarvarbek Khamrayevich Jumaboyev
Journal of Tashkent Institute of Railway Engineers
The paper proposes a design of a device for converting current to voltage with advanced functionality, designed to detect the asymmetry of three-phase currents in both DC and Made AC circuits. theoretical investigations and mathematical model of static characteristics of the Converter from changes in the magnetization curve of the magnetic material under the interaction of two fields generated by modulating current flowing in the modulation coil and an alternating magnetic field with a strength and created during the flow of DC buses DC field strength and shown that the nonlinearity of the dependence really is a principal factor responsible …
Modeling And Simulation For Inter-Harmonics Of Double Pwm Ac Speed Control System For Port Bridge Crane, Wenhuan Yang, Dirui Yang, Ronggao Li
Modeling And Simulation For Inter-Harmonics Of Double Pwm Ac Speed Control System For Port Bridge Crane, Wenhuan Yang, Dirui Yang, Ronggao Li
Journal of System Simulation
Abstract: When the total capacity of double PWM reversible speed control system in distribution network accounts for a larger proportion of power grid capacity, the power quality pollution, or even voltage flicker is generated by interharmonics of double PWM system. Therefore the stable operation of the power grid is affected. Based on the studies on bridge crane system in Shanghai Deep water Port area, a mathematical model of multi-quadrant double PWM reversible speed control system was established. In accordance with the operating characteristics of motor, the inter-harmonic currents, injected into grid were simulated at different speeds respectively in the power …
About Computer Simulation Of The Structure Of Cellular Concrete With A Tasked Heat Conductivity, Anvar Ishanovich Adilkhodjayev, S.S. Shaumarov, E.V. Shchipacheva
About Computer Simulation Of The Structure Of Cellular Concrete With A Tasked Heat Conductivity, Anvar Ishanovich Adilkhodjayev, S.S. Shaumarov, E.V. Shchipacheva
Journal of Tashkent Institute of Railway Engineers
This article presents the developed mathematical model of the structure of cellular concrete and its computer implementation in the form of a computational software package that allows you to determine pore sizes and characteristics of inter-pore walls, corresponding to the required thermal conductivity of the material. The stages of computer simulation of the macrostructure of cellular concrete are also given.
Three-Way Thermal Model Of Asynchronous Traction Engines For Diagnostics Of Their Technical Condition, Zhavkharbek Sulton Ugli Fayzullaev
Three-Way Thermal Model Of Asynchronous Traction Engines For Diagnostics Of Their Technical Condition, Zhavkharbek Sulton Ugli Fayzullaev
Journal of Tashkent Institute of Railway Engineers
Mathematical models of the thermal processes of traction induction motors are developed. An induction motor is considered as a thermal system consisting of three bodies (stator winding, stator magnetic circuit and rotor), in which heat transfer is taken into account not only between the respective bodies, but also heat transfer between each body and the environment. It is shown that the steady-state excess of the stator winding temperature of a traction induction motor depends on the multiplicity of the stator winding current, the coefficient of electrical energy loss, and also on the temperature coefficient of resistance of the material of …