Digital Commons Network^™

The Effect Of Silicon Content On Impact Toughness Of T91 Grade Steels, Ajit K. Roy, Pankaj Kumar, Debajyoti Maitra

Mechanical Engineering Faculty Research

The impact resistance of silicon (Si)-containing modified 9Cr-1Mo steels has been investigated within a temperature regime of -40 to 440°C using the Charpy method. The results indicate that the energies absorbed in fracturing the tested specimens were substantially lower at temperatures of -40, 25, and 75°C compared to those at elevated temperatures. Lower impact energies and higher ductile-to-brittle-transition-temperatures (DBTTs) were observed with the steels containing 1.5 and 1.9 wt.% Si. The steels containing higher Si levels exhibited both ductile and brittle failures at elevated temperatures. However, at lower temperatures, brittle failures characterized by cleavage and intergranular cracking were observed for …

Role Of Forward Model In Surface-Wave Studies To Delineate A Buried High-Velocity Layer, Xiaohui Jin, Barbara Luke, Carlos Calderon-Macias

Civil and Environmental Engineering and Construction Faculty Research

Procedures are tested and compared for processing Rayleigh surface wave data to obtain one-dimensional shear wave velocity profiles for a hypothetical site that contains a buried high-velocity layer (HVL). The main purpose of such an investigation would be to discriminate and characterize the HVL. When target dispersion curves are derived from synthetic time histories, for the most part, the HVL is better identified when profiles are inverted using only the fundamental mode of Rayleigh wave propagation, rather than a more compatible but more complex forward model. The outcomes imply that in practice, a simple forward model might be more successful …

Corrosion Research On Rock Bolts And Steel Sets For Sub-Surface Reinforcement Of The Yucca Mountain Repository, Dhanesh Chandra, Jaak J.K. Daemen

Publications (YM)

Underground nuclear waste storage repositories generally use steels and super alloys for various structural members and storage containers. These materials are susceptible to corrosion due to seepage of water. We studied rock bolt materials for reinforcing tunnels and containment materials for storing nuclear waste materials. In general, the design of underground support materials for tunnels are mainly based on mechanical behavior of the materials, but not much was known about the interaction of the seepage YM waters with the structural members under various conditions in the tunnels. The sources of water in the Yucca Mountain (YM) repository are due to …

An H-Adaptive Finite-Element Technique For Constructing 3d Wind Fields, Darrell Pepper, Xiuling Wang

Mechanical Engineering Faculty Research

An h-adaptive, mass-consistent finite-element model (FEM) has been developed for constructing 3D wind fields over irregular terrain utilizing sparse meteorological tower data. The element size in the computational domain is dynamically controlled by an a posteriori error estimator based on the L2 norm. In the h-adaptive FEM algorithm, large element sizes are typically associated with smooth flow regions and small errors; small element sizes are attributed to fast-changing flow regions and large errors. The adaptive procedure employed in this model uses mesh refinement–unrefinement to satisfy error criteria. Results are presented for wind fields using sparse data obtained from two regions …

Scheduling Architectures For Diffserv Networks With Input Queuing Switches, Mei Yang, Henry Selvaraj, Enyue Lu, Jianping Wang, S. Q. Zheng, Yingtao Jiang

Electrical & Computer Engineering Faculty Research

ue to its simplicity and scalability, the differentiated services (DiffServ) model is expected to be widely deployed across wired and wireless networks. Though supporting DiffServ scheduling algorithms for output-queuing (OQ) switches have been widely studied, there are few DiffServ scheduling algorithms for input-queuing (IQ) switches in the literaure. In this paper, we propose two algorithms for scheduling DiffServ DiffServ networks with IQ switches: the dynamic DiffServ scheduling (DDS) algorithm and the hierarchical DiffServ scheduling (HDS) algorithm. The basic idea of DDS and HDS is to schedule EF and AF traffic According to Their minimum service rates with the reserved bandwidth …

Free Regions Of Sensor Nodes, Laxmi P. Gewali, Navin Rongatana, Henry Selvaraj, Jan B. Pedersen

Electrical & Computer Engineering Faculty Research

We introduce the notion of free region of a node in a sensor network. Intuitively, a free region of a node is the connected set of points R in its neighborhood such that the connectivity of the network remains the same when the node is moved to any point in R. We characterize several properties of free regions and develop an efficient algorithm for computing them. We capture free region in terms of related notions called in-free region and out-free region. We present an O(n2) algorithm for constructing the free region of a node, where n is the number of …

An Algorithm For Identifying Novel Targets Of Transcription Factor Families: Application To Hypoxia-Inducible Factor 1 Targets, Yue Jiang, Bojan Cukic, Donald A. Adjeroh, Heath D. Skinner, Jie Lin, Qingxi J. Shen, Bing-Hua Jiang

Electrical & Computer Engineering Faculty Research

Efficient and effective analysis of the growing genomic databases requires the development of adequate computational tools. We introduce a fast method based on the suffix tree data structure for predicting novel targets of hypoxia-inducible factor 1 (HIF-1) from huge genome databases. The suffix tree data structure has two powerful applications here: one is to extract unknown patterns from multiple strings/sequences in linear time; the other is to search multiple strings/sequences using multiple patterns in linear time. Using 15 known HIF-1 target gene sequences as a training set, we extracted 105 common patterns that all occur in the 15 training genes …

Model For Alumina Nanopore-Based Optical Filter, Nathan Lehman, Rama Venkat, Robert A. Schill

Electrical & Computer Engineering Faculty Research

Alumina nanopore structures find applications in magnetic sensors, optical filters, and various biological devices. In this work, we present a ray-optics model for the optical filter. We present a detailed simulation and a simplified analytical expression for the reflectance as a function of the alumina parameters such as pore diameter, pore density, alumina thickness, and a function of the wavelength and angle of incidence of the illuminating plane electromagnetic wave. The reflectance vs wavelength in the range of 400–800nm obtained from the simulation and the analytical expression are compared with that of the experiments for thin and thick alumina. All …

Damage Characterization Of Beam-Column Joints Reinforced With Gfrp Under Reversed Cyclic Loading, Aly M. Said

Civil and Environmental Engineering and Construction Faculty Research

The use of fiber reinforced polymer (FRP) reinforcement in concrete structures has been on the rise due to its advantages over conventional steel reinforcement such as corrosion. Reinforcing steel corrosion has been the primary cause of deterioration of reinforced concrete (RC) structures, resulting in tremendous annual repair costs. One application of FRP reinforcement to be further explored is its use in RC frames. Nonetheless, due to FRP's inherently elastic behavior, FRP-reinforced (FRP-RC) members exhibit low ductility and energy dissipation as well as different damage mechanisms. Furthermore, current design standards for FRP-RC structures do not address seismic design in which the …

Research On The Transport And Deposition Of Nanoparticles In A Rotating Curved Pipe, Jianzhong Lin, Peifeng Lin, Huajun Chen

Mechanical Engineering Faculty Research

A finite-volume code and the SIMPLE scheme are used to study the transport and deposition of nanoparticles in a rotating curved pipe for different angular velocities, Dean numbers, and Schmidt numbers. The results show that when the Schmidt number is small, the nanoparticle distributions are mostly determined by the axial velocity. When the Schmidt number is many orders of magnitude larger than 1, the secondary flow will dominate the nanoparticle distribution. When the pipe corotates, the distribution of nanoparticle mass fraction is similar to that for the stationary case. There is a “hot spot” deposition region near the outside edge …

Yttrium And Hydrogen Superstructure And Correlation Of Lattice Expansion And Proton Conductivity In The Bazr0.9y0.1o2.95 Proton Conductor, A. Braun, A. Ovalle, V. Pomjakushin, A. Cervellino, S. Erat, Wayne C. Stolte, T. Graule

Chemistry and Biochemistry Faculty Research

Bragg reflections in Y-resonant x-ray diffractograms of BaZr_0.9Y_0.1O_2.95 (BZY10) reveal that Y is organized in a superstructure. Comparison with neutron diffraction superstructure reflections in protonated/deuterated BZY10 suggests that both superstructures are linked, and that protons move in the landscape imposed by the Y. The thermal lattice expansion decreases abruptly for protonated BZY10 at T≥648±20 K, coinciding with the onset of lateral proton diffusion and suggesting a correlation of structural changes and proton conductivity. The chemical shift in the Y L₁-shell x-ray absorption spectra reveals a reduction from Y³⁺ toward Y²⁺ upon …

Oxidation Modeling By Means Of Molecular Dynamics, Chaiyod Soontrapa

UNLV Theses, Dissertations, Professional Papers, and Capstones

Oxidation modeling is normally engineered to study systems at macroscopic scales, mostly in analytical forms based on diffusion theories. The associated time scale is usually in months, days, or minutes, and the length scale is in the order of microns. In this dissertation, oxidation modeling is performed at atomistic scale with the time and length scales in picoseconds and angstroms, respectively, using molecular dynamics. Molecular dynamics simulations generate trajectories of each atom or particle in a system according to the laws of physics. Studying oxidations under the atomistic point of view can offer new insights on atomic behaviors and influencing …

Parametric Study Of Efficiency Measures For Home Energy Conservation In Las Vegas, Nevada, Todd M. France

UNLV Theses, Dissertations, Professional Papers, and Capstones

Pulte Homes, a production home builder and community developer partnering with the U.S. Department of Energy's Building America program, has collaborated with the Center for Energy Research at the University of Nevada, Las Vegas and NV Energy, the local electric utility, on an energy conservation project in the Las Vegas Valley.

This study entails four model homes at a new development in the Summerlin community of Las Vegas, Nevada, named Villa Trieste. The home models, ranging in floor plan area from 1,487 to 1,777 square feet, have been constructed under the Environments for Living program and are LEED (Leadership in …

Criticality Studies Of Actinides Within Fissures, Trevor Wilcox

UNLV Theses, Dissertations, Professional Papers, and Capstones

The storage of nuclear waste in underground storage facilities presents numerous engineering challenges and risks. Experimental verification of engineered underground storage is impractical or prohibitively expensive, leaving scientists with few options. A 1995 report by Bowman and Venneri of the Los Alamos National Laboratory generated considerable controversy by hypothesizing that wastes composed of fissionable plutonium leached from underground storage containers could pose a nuclear criticality hazard. They proposed cases where plutonium collected in underground fractures could lead to sustained nuclear fission. In overmoderated cases, they argued that the resulting release of energy from fission could result in steam explosions, or …

Analysis Of A Caliche Stiffened Pile Foundation, Richard C. Stone Jr.

UNLV Theses, Dissertations, Professional Papers, and Capstones

Cemented carbonate deposits (known locally as "caliche") in Las Vegas have been used to support shallow and deep foundations with relatively high bearing pressures compared to soil. Most high rise structures in Las Vegas are founded on either a large mat or a long pile foundation. Recently, a new foundation type consisting of a short pile system bonded to shallow cemented layers was utilized for a large high rise building in Las Vegas and settlements during construction were recorded. The bonding of caliche layers together with short piles forms a caliche stiffened pile (CSP) foundation. The CSP foundation is unique …

On-Board Three-Dimensional Object Tracking: Software And Hardware Solutions, Ajay Kumar Mandava

UNLV Theses, Dissertations, Professional Papers, and Capstones

We describe a real time system for recognition and tracking 3D objects such as UAVs, airplanes, fighters with the optical sensor. Given a 2D image, the system has to perform background subtraction, recognize relative rotation, scale and translation of the object to sustain a prescribed topology of the fleet. In the thesis a comparative study of different algorithms and performance evaluation is carried out based on time and accuracy constraints. For background subtraction task we evaluate frame differencing, approximate median filter, mixture of Gaussians and propose classification based on neural network methods. For object detection we analyze the performance of …

Hierarchical Routing In Manets Using Simple Clustering, Adam Carnine

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis presents both a review of current MANET routing protocols and a new MANET routing algorithm. The routing protocols reviewed include representative samples from the three primary forms of routing found in MANETS: proactive routing, reactive routing and hybrid routing. Secure algorithms are given special treatment in the review. In addition several protocol enhancements are discussed.

The proposed routing protocol is designed to support networks of a medium size, containing over 200 nodes but less than 3,000 nodes. The design is intentionally simple to allow ease of implementation in comparison with other MANET protocols that provide similar functionality.

Individual Copper Nanowire Decorated By Gold Nanoparticles For Surface Enhanced Raman Scattering, Roshan Guttikonda

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this Thesis, I discuss the theory, implementation and applications of Surface enhanced Raman scattering (SERS). Surface enhanced Raman scattering has been used to detect 4 mercaptopyridine molecules. On a Silicon wafer, Gold nanoparticles are deposited onto Copper nanowires. Hotspots occur at the small gap (less than 10nm) between the nanowire and nanoparticle. The interaction of the electromagnetic field of the incident laser and the surface plasmon resonances of the metal nanoparticles at the hot spots enhances the Raman scattering signal of the adsorbed pyridine molecule (10 -3 M ). The dependence of SERS signal on the polarization angle of …

Soil Moisture And Water Stage Estimation Using Precipitation Radar, Sumit Puri

UNLV Theses, Dissertations, Professional Papers, and Capstones

In south-western United States, soil moisture data is important for drought studies in the region which is experiencing a drought for many years, whereas in South Florida, water stage data is required by hydrologists to monitor the hydrological flow in wetlands. Soil moisture data and water stage data are not sufficiently available due to sparse monitoring stations. Installation of dense measuring stations over an extended area is costly and labor intensive. Therefore, there is a need to develop an alternative method of measuring soil moisture and water stage. Microwave remote sensing has proven to be a useful tool in the …

Spectroscopic Investigation Of Palladium-Copper Bimetallic Systems For Pem Fuel Cell Catalysts, Timo Hofmann

UNLV Theses, Dissertations, Professional Papers, and Capstones

One of the main barriers to commercialization of polymer electrolyte membrane fuel cells systems is cost, which is largely due to the need of platinum (Pt)-containing catalysts. In this thesis we investigate bimetallic systems consisting of a base metal (copper) and a noble metal (palladium) that, as an alloy on the nanoscale, mimic the electronic properties that make Pt desirable as a catalyst.

We present a detailed investigation of the electronic structure of carbon-supported Pd/Cu nanoparticle catalysts, model bilayer thin film systems, alloys, and various metal reference samples. We have investigated the valence band structure of the catalysts using a …

Effect Of Mechanical Vibrations On Light Emitting Diode Luminaires, Jayalakshmi Paladugu

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this work, a LED and two types of Compact fluorescent lamps were investigated for the intensity variation due to mechanical vibrations in the range of 0 to 30 HZ. In general, subjecting the lamps to 24-hour vibration affects the total intensity percentage variations of peak intensities after vibrations is in the range of -25 to +15% compared to those of no vibrations for the light emitting diode luminaires. For the case of compact fluorescent lamps (Nuvue) the variations are in range from +10 to +35%, whereas for the Compact fluorescent lamps (Ecosmart) the intensity peaks range from -10 to …

Empirically Derived Formulas To Predict Indoor Maximum, Average, And Minimum Temperatures In Roofpond Buildings Using Minimum Climatic Information, Ibrahim Kivarkis Kako

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis introduces an empirically developed formula to predict the comfort conditions and thermal performance of a Skytherm(TM) Southwest Roofpond placed over a light-weight un-insulated structure built at the School of Architecture at the University of Nevada, Las Vegas.

The predictive formula introduced in this study may be used in different parts of the world (particularly developing nations where insulation and air-conditioning are rarely used) to predict the performance of a Skytherm(TM) Southwest Roofpond using minimal climate data.

The data collected in the experimental setup at the Natural Energies Advanced Technologies Laboratory included outside and inside temperatures of various surfaces …

Optimization Of Channel Geometry In A Proton Exchange Membrane (Pem) Fuel Cell, Jephanya Kasukurthi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Bipolar plates are the important components of the PEM fuel cell. The flow distribution inside the bipolar plate should be uniform. Non-uniform flow distribution inside the bipolar leads to poor performance of the fuel cell and wastage of expensive catalyst. A single channel PEM fuel cell is taken and electrochemical analysis is carried out on it. The results are compared with the available published experimental data obtained by other research group, and they are found to be in good agreement. A baseline design of the bipolar plate is taken and numerical analysis is carried out. The results show that the …

Update To Ansi/Ans-6.4.3-1991 For Low-Z And Compound Materials And Review Of Particle Transport Theory, Luis Durani

UNLV Theses, Dissertations, Professional Papers, and Capstones

The ANSI/ANS-6.4.3-1991 Gamma-Ray Attenuation Coefficients and Buildup Factors for Engineering Materials Standard (herein known as ANS Standard), contains derived gamma-ray attenuation coefficients and buildup factors for selected engineering materials and elements for use in shielding calculations (ANSI/ANS-6.1.1, 1991). The current status of the ANS Standard is withdrawn due to the lack of any updates since its last publication. Since the last update of the ANS standard, more accurate codes for particle transport and cross sectional data have become available. As a result, this study was carried out to update gamma-ray buildup factors for iron and water as a function of …

Two-Tank Indirect Thermal Storage Designs For Solar Parabolic Trough Power Plants, Joseph E. Kopp

UNLV Theses, Dissertations, Professional Papers, and Capstones

The performance of a solar thermal parabolic trough plant with thermal storage is dependent upon the arrangement of the heat exchangers that ultimately transfer energy from the sun into steam. The steam is utilized in a traditional Rankine cycle power plant. The most commercially accepted thermal storage design is an indirect two-tank molten salt storage system where molten salt interacts with the solar field heat transfer fluid (HTF) through a heat exchanger. The molten salt remains in a closed loop with the HTF and the HTF is the heat source for steam generation. An alternate indirect two tank molten salt …

Fracture Toughness, Crack-Growth-Rate And Creep Studies Of Alloy 276, Joydepp Pal

UNLV Theses, Dissertations, Professional Papers, and Capstones

Austenitic nickel-base Alloy 276 had been proposed to be a candidate structural material within the purview of the nuclear hydrogen initiative program. A mechanistic understanding of high temperature tensile deformation of this alloy has already been presented in an earlier investigation. The current investigation has been focused on the evaluation of crack-growth behavior, fracture toughness, stress-corrosion-cracking and creep deformation of this alloy as functions of different metallurgical and mechanical variables. The results of crack-growth study under cyclic loading indicate that this alloy exhibited greater cracking tendency with increasing temperature at a constant load ratio (R). However, the effect of temperature …

Study Of Corrosion Of Materials In The Sulfur-Iodine Hydrogen Production Cycle, Thao Trung Ho

UNLV Theses, Dissertations, Professional Papers, and Capstones

Hydrogen is of great interest since the availability of traditional fossil fuels is in decline. Strictly speaking, hydrogen is not a primary source of energy but is an energy carrier, since energy typically must be used from another source (electricity, natural gas, coal, etc.) to produce it. Of hydrogen production techniques, the Sulfur-Iodine thermochemical water splitting process (S-I cycle), which was proposed by General Atomics (GA), is promising with its simplicity and high efficiency. Most of the chemicals are recycled except water. However, the S-I cycle operates in a harsh, corrosive environment in the presence of a mixture of iodine …

Studying The Impacts Of Primary Incidents On Freeways To Identify Secondary Incidents, Rohit Reddy Saddi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Freeway incidents are associated with different impacts such as traffic congestion, delays, fuel consumption, secondary incidents etc. Secondary incidents are caused due to primary incidents and require the same personnel who are already engaged. This thesis studies various impacts caused by primary incident in space and time occurring on the freeways and these results are applied to identify secondary incidents. Three types of impacts are identified and proposed in this study. Dynamic nature of queue length in the direction of accident is studied. Dynamic nature of congestion in the opposite direction of the freeway till the accident is cleared is …

Substituent Effect On The Electronic And Assembling Properties Of Asymmetric Phenazine Derivatives, Bin Cao

UNLV Theses, Dissertations, Professional Papers, and Capstones

Currently, one-dimensional (1-D) nanostructures have drawn much interest because of their potential applications for nanoscale optoelectronic devices. Self-assembly (SA) based on π-conjugated systems through various intermolecular interactions has been widely used to produce 1-D nanostructure. Morphology of the assembled structures can be modified by incorporating substituents, which provide additional secondary interactions. Meanwhile, those substituents also influence the electronic properties of the molecules. Previous studies have made little effort to systematically study subsistent effects on both electronic and SA properties.

The primary objective of this research is to generate controllable 1-D structures through SA, and to provide a fundamental understanding of …

Novel Techniques In Iris Recognition, David Walker

UNLV Theses, Dissertations, Professional Papers, and Capstones

Using Daugman's algorithm and comparable alternatives, we find that we are able to identify an iris with as little as less than half of the iris information available, and an equal error rate comparable with that of popular biometrics like the fingerprint and face recognition biometrics. Different experiments were done based on percentage of iris shown, the resolution of the iris, and the position of the iris covered to determine if partial iris recognition is a viable biometric. It was found after over 500,000 different iris comparisons amongst five different experiments that regardless of the model used and the resolution, …