Digital Commons Network^™

A New Generation Of Dense-Graded Asphalt Mixtures With Superior Performance Against Stripping And Moisture Damage, Mostafa Elseifi, Zahid Hossain, Md. T.A Sarkar, Hossam Abohamer, Mohammad Oyan

Data

The presence of moisture beneath the pavement surface is a matter of great concerns as it is responsible for significant distresses such as asphalt concrete (AC) stripping, fatigue cracking, rutting, and poor durability of asphalt mixes. The objective of this study was to evaluate and recommend an asphalt mixture design that would provide superior performance against AC stripping and cracking. To achieve this objective, a laboratory test factorial was developed to evaluate the use of nanomaterials, emerging anti-stripping agents, warm-mix asphalt technologies, and adhesion promotors. In the experimental program, the modified Lottman test (AASHTO T 283) and the Indirect Tensile …

A New Generation Of Dense-Graded Asphalt Mixtures With Superior Performance Against Stripping And Moisture Damage, Mostafa Elseifi, Zahid Hossain, Md. T.A. Sarkar, Hossam Abohamer, Mohammad Oyan

Publications

The presence of moisture beneath the pavement surface is a matter of great concerns as it is responsible for significant distresses such as asphalt concrete (AC) stripping, fatigue cracking, rutting, and poor durability of asphalt mixes. The objective of this study was to evaluate and recommend an asphalt mixture design that would provide superior performance against AC stripping and cracking. To achieve this objective, a laboratory test factorial was developed to evaluate the use of nanomaterials, emerging anti-stripping agents, warm-mix asphalt technologies, and adhesion promotors. In the experimental program, the modified Lottman test (AASHTO T 283) and the Indirect Tensile …

Anaerobic Toluene Biodegradation Potential At A Superfund Site Where Toluene Biosynthesis Was Observed, George Carson

LSU Master's Theses

At a Superfund site near Baton Rouge, LA, the subsurface injection of molasses has been used to stimulate anerobic reductive dechlorination of halogenated organic compounds (e.g., 1,2-dichloroethane and vinyl chloride) present in the groundwater. Following some molasses injections, temporary accumulation of toluene and p-cresol was observed in the groundwater. Accumulation of these aromatic hydrocarbons, which were not detected in the molasses, has been attributed to anaerobic biotransformation of the amino acids phenylalanine and tyrosine. Experiments reported here were conducted in support of an effort to determine if toluene biodegrading bacteria were present in the area where anaerobic toluene accumulation was …

Development Of Ultra-High Performance Engineered Geopolymer Composites (Uhp-Egcs), Hassan Noorvand, Miladin Radovic, Marwa Hassan, Svetlana Sukhishvili, Gabriel Arce, Ruwa Abufarsakh, Adriana A. Alvarado, Oscar Huang, Sang Zhen

Data

This study investigated the possibility of developing novel UHP-EGC materials for the repair and new construction of transportation infrastructure in Region 6 by utilizing locally available resources. To this end, the geopolymers (GPs) in this study were synthesized by activating metakaolin (MK) with potassium silicate and sodium silicate solutions. The solutions were manufactured in the laboratory by dissolving silica fume and potassium hydroxide (KOH) or sodium hydroxide (NaOH) in deionized water. MK-based GP binders, mortars, and fiber-reinforced composites were manufactured and evaluated to determine their density, compressive strength, tensile properties, and slant shear bond strength to Portland cement concrete (PCC). …

Development Of Ultra-High Performance Engineered Geopolymer Composites (Uhp-Egcs), Hassan Noorvand, Miladin Radovic, Marwa Hassan, Svetlana Sukhishvili, Gabriel Arce, Ruwa Abufarsakh, Adriana A. Alvarado, Oscar Huang, Sang Zhen

Publications

This study investigated the possibility of developing novel UHP-EGC materials for the repair and new construction of transportation infrastructure in Region 6 by utilizing locally available resources. To this end, the geopolymers (GPs) in this study were synthesized by activating metakaolin (MK) with potassium silicate and sodium silicate solutions. The solutions were manufactured in the laboratory by dissolving silica fume and potassium hydroxide (KOH) or sodium hydroxide (NaOH) in deionized water. MK-based GP binders, mortars, and fiber-reinforced composites were manufactured and evaluated to determine their density, compressive strength, tensile properties, and slant shear bond strength to Portland cement concrete (PCC). …

Comparative Analysis Of 3d Printed Bridge Construction In Louisiana, Amirhosein Jafari, Ali Kazemian, Sarah Ataei

Publications

A construction 3D printing system could result in automated infrastructure development at reduced cost and time, significantly boosting overall productivity. Although there has been a growing interest in using construction 3D printing for projects such as house construction, implementing this innovative technology for infrastructure development, particularly bridge construction, has not been investigated as extensively. This study aims to compare the environmental impact of precast and 3D concrete printing (3DCP) techniques with a pedestrian bridge case study, located in Louisiana, where the bridge elements were 3D printed off-site and then transported and assembled on the bridge site. A detailed cradle-to-site life …

Numerical Investigation Of Heat Generation And Accumulation Contributing To Elevated Temperature In Msw Landfills, Alborz Fathinezhad

LSU Doctoral Dissertations

Landfills are complex geostructures which contains organic and inorganic municipal, and in some cases industrial, wastes and are expected to remain operational for long times. Due to the complex nature of physical, chemical, biological, and thermal reactions that carry on within the depths of a landfill, unexpected incidents such as elevated temperatures could become inevitable. While uncommon to happen, elevated temperatures cause health and environmental issues such as odors, rapid settlements, slope instabilities. In addition, elevated temperatures can negatively impact engineered components in composite bottom liners, cover systems, leachate collection, and gas extraction and recovery systems.

Air intrusion into municipal …

Toward A Safer Transportation System For Senior Road Users, Saba Doulabi

LSU Doctoral Dissertations

Senior pedestrians and drivers (65 years and older) are among the most vulnerable road users. As the population of seniors rise, concerns regarding older adults' traffic safety are growing. The advantages of using autonomous vehicles, innovative vehicle technologies, and active transportation are becoming more widely recognized to improve seniors' mobility and safety. This behooves researchers to further investigate senior road users’ safety challenges and countermeasures. This study contributes to the literature by achieving two main goals. First, to explore contributing factors affecting the safety of older pedestrians and drivers in the current transportation system. Second, to examine seniors’ perceptions, preferences, …

Low-Cost Sustainable Engineered Geopolymer Composites (Egcs) For Repair And New Construction Of Transportation Infrastructure, Hassan Noorvand, Marwa Hassan, Miladin Radovic, Svetlana Sukhishvili, Gabriel Arce, Ruwa Abufarsakh, Adriana A. Alvarado, Oscar Huang, Sang Zhen

Data

This study evaluated the use of cost-effective alternative materials in the formulation of novel low-cost Engineered Geopolymer Composite (EGC) materials for repair and new construction of transportation infrastructure in Region 6. Previous studies and reports have shown that EGCs have excellent mechanical properties, which makes them an eco-friendly and more sustainable alternative to Engineered Cementitious Composites (ECCs). However, the mass adoption of these emerging composites is expected to be hindered by their cost, which is mainly driven by the use of PVA reinforcing fibers, silica fume (SF), and manufactured microsilica sand (MS). To address this key shortcoming, novel low-cost EGC …

Development Of Robotics & Automation Roadmap For Road Construction/Maintenance Projects, Ashrant Aryal, Chao Wang, Chintan Vijay Vora, Sueed A. Willoughby

Data

Over the past few decades, there have been no significant improvements in the construction industry's productivity. Outside the construction industry, robots have proven to be beneficial in improving productivity, safety, and quality. There is a growing interest in adopting robots in the construction industry to address these issues. As robots get introduced to the project sites, human-robot interaction becomes an important consideration for wide-scale adoption. The success of deploying robots in the construction industry depends on how well humans collaborate with the robots. This project focused on investigating the perception of various construction industry stakeholders in adopting robots in their …

Rebar-Free 3d Printing Of Transportation Infrastructure, Ali Kazemian, Marwa Hassan, Hassan Noorvand, Gabriel Arce, Hassan Ahmed, Ilerioluwa Giwa

Data

This study investigates the fresh and hardened-state properties of printing mixtures including different dosages of steel fibers, especially at higher dosages which have not been investigated before. This study also considers the effects of other parameters such as sand-to-powder ratio and the limestone content on the properties of steel fiber reinforced printing materials, to reduce the Portland cement content which has a high carbon footprint. The obtained experimental results revealed that high-performance materials incorporating up to 2.5% steel fibers (by volume) can be successfully 3D printed. The mechanical properties of the reinforced mixtures improved significantly at high fiber dosages (2% …

Rebar-Free 3d Printing Of Transportation Infrastructure, Ali Kazemian, Marwa Hassan, Hassan Noorvand, Gabriel Arce, Hassan Ahmed, Ilerioluwa Giwa

Publications

This study investigates the fresh and hardened-state properties of printing mixtures including different dosages of steel fibers, especially at higher dosages which have not been investigated before. This study also considers the effects of other parameters such as sand-to-powder ratio and the limestone content on the properties of steel fiber reinforced printing materials, to reduce the Portland cement content which has a high carbon footprint. The obtained experimental results revealed that high-performance materials incorporating up to 2.5% steel fibers (by volume) can be successfully 3D printed. The mechanical properties of the reinforced mixtures improved significantly at high fiber dosages (2% …

Development Of Robotics & Automation Roadmap For Road Construction/Maintenance Projects, Ashrant Aryal, Chao Wang, Chintan Vijay Vora, Sueed A. Willoughby

Publications

Over the past few decades, there have been no significant improvements in the construction industry's productivity. Outside the construction industry, robots have proven to be beneficial in improving productivity, safety, and quality. There is a growing interest in adopting robots in the construction industry to address these issues. As robots get introduced to the project sites, human-robot interaction becomes an important consideration for wide-scale adoption. The success of deploying robots in the construction industry depends on how well humans collaborate with the robots. This project focused on investigating the perception of various construction industry stakeholders in adopting robots in their …

Low-Cost Sustainable Engineered Geopolymer Composites (Egcs) For Repair And New Construction Of Transportation Infrastructure, Hassan Noorvand, Marwa Hassan, Miladin Radovic, Svetlana Sukhishvili, Gabriel Arce, Ruwa Abufarsakh, Adriana A. Alvarado, Oscar Huang, Sang Zhen

Publications

This study evaluated the use of cost-effective alternative materials in the formulation of novel low-cost Engineered Geopolymer Composite (EGC) materials for repair and new construction of transportation infrastructure in Region 6. Previous studies and reports have shown that EGCs have excellent mechanical properties, which makes them an eco-friendly and more sustainable alternative to Engineered Cementitious Composites (ECCs). However, the mass adoption of these emerging composites is expected to be hindered by their cost, which is mainly driven by the use of PVA reinforcing fibers, silica fume (SF), and manufactured microsilica sand (MS). To address this key shortcoming, novel low-cost EGC …

Permeable Curbs For Storm Water Pollution, Aldo Hernandez, Drew Johnson, Marcio Giacomoni

Data

One of the problems that increased urbanization poses is storm water pollution. Several control measures exist that are used to treat and reduce pollution in our waterways, one of those being permeable concretes; but these have not been widely adopted. The goal of this project was to develop a permeable curb apparatus that could be used in retrofitting conventional streets. The permeable curb is comprised of a permeable concrete mix with a perforated pipe running through its center, this allows for water to filter through the porous concrete and continue downstream through the perforated pipe which would eventually lead to …

Coupled Situational Awareness System To Improve Transportation Infrastructure Performance During Extreme Events, Hatim Sharif, Samer Dessouky, Md Jobair Bin Alam, Raghava Kommalapati, Hongbo Du Ph.D

Data

The dense road networks and numerous low water crossings throughout Texas may be contributing to the higher recurrence rates of floods that pose a danger to vehicles. A timely issue that should be addressed by researchers is the compounding of disaster. Flooding can be combined with other life-threatening occurrences such as power loss and interruptions of health and emergency services. During these events, rescue requests from the stranded communities overwhelm the emergency response facilities; impassable roadways and the paucity of reliable information on the affected areas and their accessibility hamper emergency response operations, causing several detours and delays that put …

Permeable Curbs For Storm Water Pollution, Aldo Hernandez, Drew Johnson, Marcio Giacomoni

Publications

One of the problems that increased urbanization poses is storm water pollution. Several control measures exist that are used to treat and reduce pollution in our waterways, one of those being permeable concretes; but these have not been widely adopted. The goal of this project was to develop a permeable curb apparatus that could be used in retrofitting conventional streets. The permeable curb is comprised of a permeable concrete mix with a perforated pipe running through its center, this allows for water to filter through the porous concrete and continue downstream through the perforated pipe which would eventually lead to …

Coupled Situational Awareness System To Improve Transportation Infrastructure Performance During Extreme Events, Hatim Sharif, Samer Dessouky, Md Jobair Bin Alam, Raghava Kommalapati, Hongbo Du Ph.D

Publications

The dense road networks and numerous low water crossings throughout Texas may be contributing to the higher recurrence rates of floods that pose a danger to vehicles. A timely issue that should be addressed by researchers is the compounding of disaster. Flooding can be combined with other life-threatening occurrences such as power loss and interruptions of health and emergency services. During these events, rescue requests from the stranded communities overwhelm the emergency response facilities; impassable roadways and the paucity of reliable information on the affected areas and their accessibility hamper emergency response operations, causing several detours and delays that put …

Examining Drivers’ Behaviors To Connected And Automated Vehicles, Hany Hassan, Taniya Sultana

Data

It is envisioned that Connected and Automated Vehicles (CAVs) are the future of transportation as they can assist in minimizing some inefficiencies with the current transport systems. However, it is not clear how drivers of conventional vehicles would interact with CAVs in a mixed traffic environment containing both CAVs and human driven vehicles (HDVs). Thus, this study aims to investigate drivers’ behaviors towards CAVs through driving simulation experiment and national survey study. Two on-ramp and two off-ramp driving simulation scenarios were designed where drivers were asked to merge with two-lane highway in presence of HDVs and CAVs truck platoon in …

Examining Drivers’ Behaviors To Connected And Automated Vehicles, Hany Hassan, Taniya Sultana

Publications

It is envisioned that Connected and Automated Vehicles (CAVs) are the future of transportation as they can assist in minimizing some inefficiencies with the current transport systems. However, it is not clear how drivers of conventional vehicles would interact with CAVs in a mixed traffic environment containing both CAVs and human driven vehicles (HDVs). Thus, this study aims to investigate drivers’ behaviors towards CAVs through driving simulation experiment and national survey study. Two on-ramp and two off-ramp driving simulation scenarios were designed where drivers were asked to merge with two-lane highway in presence of HDVs and CAVs truck platoon in …

Using 2d Hec-Ras Modeling With Vertical Feature Extraction To Inform Ecological Design In The Lower Atchafalaya River Basin, Louisiana, Colin Anderson

LSU Master's Theses

A 2D HEC-RAS model was created to demonstrate applications of hydraulic modeling for informing ecological design. This was done by comparing the hydrologic conditions of a baseline year (2010) to that of the environmental flow prescription from Kozak et al. (2016). The inundation results are relevant to hydraulic connectivity and cypress regeneration.

The hydraulic model was created by assimilating numerous data sources, refining the model with vertical feature (VF) extraction, and calibrating/validating the model. Several topo-bathymetric sources were combined to create the digital elevation model (DEM). Most importantly, this included bathymetry of the backswamp. Polylines of significant VFs in the …

Incorporating Geopolymer Binders To Fully Utilize Recycled Concrete Aggregates, Matthew Upshaw

LSU Doctoral Dissertations

This study aims to develop a geopolymer concrete binder that will yield desirable strength and durability characteristics when applied to recycled aggregate concrete. In order to achieve this, a geopolymer binder consisting of a metakaolin-silica fume aluminosilicate source material blend activated by potassium-based alkaline solutions is developed and used in place of ordinary Portland cement (OPC) with four different levels of recycled aggregate replacement ratios. The properties of these concretes were analyzed and compared with the properties of OPC concretes produced with the same replacement ratio levels. The results showed that the geopolymer recycled aggregate concrete (GRAC) achieved greater than …

Effectiveness Assessment Of E-Ticketing Technology In Construction Of Transportation Projects, Sharareh Kermanshachi, Karthik Subramanya

Data

The construction of highway infrastructure has devoted significant resources towards e-Construction to reduce the paperwork and automate the tasks in daily operations. Electronic Ticketing (e-Ticketing) is one such component of e-Construction that aids in the digital transfer of material tickets such as asphalt and concrete which accounts for more than fifty per cent of construction costs. Despite the benefits of e-Ticketing, many state departments and agencies are unwilling to transition into this technology. No studies have identified the cause of the delay in the implementation process, developed a framework to comprehend the platform's full potential, quantified savings, and suggested strategies …

Development Of A Machine Learning-Based Model To Determine The Optimum And Safe Restriping Timing Of Thermoplastic Pavement Markings In Hot And Humid Climates, Momen R. Mousa, Marwa Hassan

Data

Due to limited budget, most transportation agencies restripe their thermoplastic pavement markings based on a fixed schedule or based on visual inspection instead of monitoring the retroreflectivity and restriping when the retroreflectivity drops below a pre-determined threshold. These strategies are questionable in terms of efficiency and economy. Therefore, previous studies proposed degradation models to predict the retroreflectivity of thermoplastic markings based on key variables. Yet, most of these studies reported low R² (as low as 0.1), which placed little confidence in these models. Therefore, the objective of this study was to evaluate and predict the field performance of thermoplastics …

Alternative Supplementary Cementitious Materials In Ultra-High Performance Concrete, Craig Newtson, Seyedsaleh Mousavinezhad, Gregory J, Gonzales, William K. Toledo, Judit M. Garcia

Data

Ultra-high performance concrete (UHPC) is an emerging material with remarkable mechanical and durability properties that contains large amounts of cementitious materials. Silica fume is a main supplementary cementitious material (SCM) in UHPC, however, it is more expensive than cement and other SCMs, so it is often substituted with inexpensive class F fly ash. Unfortunately, future availability of fly ash is uncertain as the energy industry moves toward renewable energy. Fly ash shortages create an urgent need to find cost-effective and environmentally-friendly alternatives for fly ash. This study investigated replacing cement, fly ash, and silica fume in UHPC mixtures with ground …

A Deep Learning Tool For The Assessment Of Pavement Smoothness And Aggregate Segregation During Construction, Mostafa Elseifi, Ramchandra Paudel, Md Tanvir Ahmed Sarkar, Hossam Abohamer, Nirmal Dhakal

Data

Pavement construction monitoring and quality assurance (QA) practices are mostly based on costly, discrete, and destructive methods. Most quality assurance programs are based on pavement construction procedures encompassing in-situ coring for layer thickness determination, density measurements, laboratory testing to measure volumetric properties, and smoothness measurements in case of the availability of a profiler. The main objective of this study was to develop a machine learning-based classifier for predicting pavement roughness and aggregate segregation based on digital image analysis, image recognition, and deep learning machine models. The developed Convolution Neural Networks (CNN) models were trained, tested, and validated using 600-pavement surface …

Using Rice Husk Ash (Rha) As Stabilizing Agent For Problematic Subgrade Soils And Embankments, Zahid Hossain, Rifat Bulut, Fares Tarhuni, Hussein Al-Dakheeli

Data

Arkansas produces the most of the rice in the United States. About 20% of poddy is rice husk (RH), which is burnt under controlled conditions to produce rice rusk ash (RHA). The RHA is considered an environmental hazard and a significant challenge for rice millers. However, RHA is rich in pozzolanic material, which is mainly silica. In this study, RHA is used to stabilize poor soils. Another commonly used stabilizer, hydrated lime (HL), has also been evaluated for comparison purposes. Thus, this study aimed to determine the optimum percentages of RHA, HL, or a combination of these two agents by …

Performance Monitoring Leveraging Advanced Ai Technique With Cnn, Suyun Ham Ph.D, Stefan Romanoschi, Yin Chao Wu, Dafnik Saril Kumar David, Sanggoo Kang

Data

The main goal of this project is to study and develop a reliable nondestructive testing (NDT)-based structural performance prediction model framework leveraging the advanced machine learning convolutional neural network (CNN) technique and rapid crack evaluation system. There are two steps of application CNN technique in this project: 1) the first step is to identify delamination, noise, and the unexpected signal produced by the existing damage identification algorithm to improve the accuracy of NDT results. The input image or training data of NDT data for CNN is comprehensively studied with several features, such as the duration of the signal, the starting …

Covid-19 And Traffic Safety: Exploring Exposure, Crash Frequency And Severity, And Roadway And Network Design, Nicholas N. Ferenchak Ph.D

Data

Early COVID-19 lockdowns in the first half of 2020 largely kept people at home, thereby reducing motor vehicle traffic levels. Theoretically, reduced traffic exposure should have resulted in reduced motor vehicle crashes. However, a variety of factors may have complicated this relationship. In order to better understand the impact of COVID-19 lockdowns on traffic safety outcomes, we explore fatalities, injuries, and total crashes before and during the lockdowns on both the national and state levels. We provide descriptive statistics and create negative binomial regressions exploring the role of vehicle, user, and built environment factors on traffic safety outcomes. Findings suggest …

Development Of Distress Index Prediction Models For Rehabilitation Treatments In Louisiana Using Advanced Machine Learning Techniques, Momen R. Mousa, Marwa Hassan

Data

Performance prediction models are used by state agencies to predict future trends in distress indices, hence, determining the required maintenance and/or rehabilitation treatment as well as the deterioration rate and remaining pavement service life. However, most of these models are based on a limited number of parameters and cannot predict the performance distress indices reliably. Such limitation resulted in having, most of the time, a maximum prediction period of five years. As a solution and coping with the ever-increasing size of pavement data, machine learning techniques have become a promising alternative. The objective of this study was to develop a …