Open Access. Powered by Scholars. Published by Universities.®
Social and Behavioral Sciences Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 31 - 52 of 52
Full-Text Articles in Social and Behavioral Sciences
Mechanics Of Design And Model Development Of Cvc-Plus Roll Curve, Jianzhong Xu, Dianyao Gong, Zhengyi Jiang, Xianghua Liu, Guodong Wang
Mechanics Of Design And Model Development Of Cvc-Plus Roll Curve, Jianzhong Xu, Dianyao Gong, Zhengyi Jiang, Xianghua Liu, Guodong Wang
Faculty of Engineering and Information Sciences - Papers: Part A
The mathematic model of CVC-Plus work roll curve is built. The ratio of the initial shifting value to the target crown is determined, and the mathematical model considering the relationship between the coefficients A2, A3, A4, A5 and is established. According to the theoretical analysis, the distance between the maximum or minimum point of the high order equivalent crown for work roll with CVC-plus roll curve and the rolling central point is the times of the roll barrel length. In general, the initial shifting value of the CVC-plus roll curve is not equal to the initial shifting value of the …
An Ontology Development Methodology To Integrate Existing Ontologies In An Ontology Development Process, Nelson K. Y Leung, Sim Kim Lau, Nicole Tsang
An Ontology Development Methodology To Integrate Existing Ontologies In An Ontology Development Process, Nelson K. Y Leung, Sim Kim Lau, Nicole Tsang
Faculty of Engineering and Information Sciences - Papers: Part A
Ontology is defmed as an explicit specification of a conceptualization while a conceptualization is an abstract, simplified view of the world that we wish to represent for some purpose. To build high quality ontologies, developers are required to choose and follow a suitable ontology development methodology in which containing a series of steps, activities and guidelines that are put together in an organized and systematic manner. Literatures show that building ontologies by reusing existing ontologies is more cost effective than building from scratch. However, majority of the methodologies only provide a very limited discussion about how to perform integration or …
Information Systems Development Projects As Complex Adaptive Systems, Karlheinz Kautz
Information Systems Development Projects As Complex Adaptive Systems, Karlheinz Kautz
Faculty of Engineering and Information Sciences - Papers: Part A
This research considers information systems development (ISD) projects as complex adaptive systems. We investigate the question whether complex adaptive systems (CAS) theory is relevant as a theoretical foundation for understanding ISD, and if so, which kind of understanding can be achieved by utilizing the theory? We introduce key concepts of CAS theory such as interaction, emergence, interconnected autonomous agents, selforganization, co-evolution, poise at the edge of chaos, time pacing, and poise at the edge of time to analyse and understand ISD in practice. We demonstrate the strength of such a CAS approach through an empirical case study presentation and analysis. …
Ethics In Engineering: Student Perceptions And Their Professional Identity Development, Brad Stappenbelt
Ethics In Engineering: Student Perceptions And Their Professional Identity Development, Brad Stappenbelt
Faculty of Engineering and Information Sciences - Papers: Part A
Professional ethics instruction in engineering is commonly conducted by examining case studies in light of the code of conduct of a suitable professional body. Although graphical presentations of spectacular failures, sobering stories of the repercussions and the solid framework provided by the tenets of a code of ethics may leave a lasting impression, students generally gain their professional identity from relatives and colleagues. Their professional ethics tend to be mostly an extension of their personal ethics. Instruction on ethics generally serves only to reinforce students' inclination to act ethically and provides encouragement to act on these beliefs. In this study …
Development Of Sipm-Based Scintillator Tile Detectors For A Multi-Layer Fast Neutron Tracker, R Preston, J Jakubek, D Prokopovich, J Uher
Development Of Sipm-Based Scintillator Tile Detectors For A Multi-Layer Fast Neutron Tracker, R Preston, J Jakubek, D Prokopovich, J Uher
Faculty of Engineering and Information Sciences - Papers: Part A
We are developing thin tile scintillator detectors with silicon photomultiplier (SiPM) readout for use in a multi-layer fast-neutron tracker. The tracker is based on interleaved Timepix and plastic scintillator layers. The thin 15 x 15 x 2 mm plastic scintillators require suitable optical readout in order to detect and measure the energy lost by energetic protons that have been recoiled by fast neutrons. Our first prototype used dual SiPMs, coupled to opposite edges of the scintillator tile using light-guides. An alternative readout geometry was designed in an effort to increase the fraction of scintillation light detected by the SiPMs. The …
Development And Validation Of A Concept Inventory For Introductory-Level Climate Change Science, Lorna Jarrett, Brian Ferry, George Takacs
Development And Validation Of A Concept Inventory For Introductory-Level Climate Change Science, Lorna Jarrett, Brian Ferry, George Takacs
Faculty of Engineering and Information Sciences - Papers: Part A
This paper follows on from Jarrett, Takacs and Ferry (2011) which reported the first stage in development of a high school level concept inventory (CI) for the science of climate change: the climate change concept inventory (CCCI). In order to develop a reliable and valid instrument, it is necessary to follow appropriate procedures. This paper details the process of CI item development; reports statistical results of initial field trials and outlines how these will be used to further refine the CCCI. Item difficulty, discrimination, and point biserial coefficient were calculated for each item. Cronbach's alpha and test-retest data were used …
An Inventory Of Landslides Within The Sydney Basin To Aid The Development Of A Refined Susceptibility Zoning, Phillip N. Flentje, David Stirling, Darshika Palamakumbure
An Inventory Of Landslides Within The Sydney Basin To Aid The Development Of A Refined Susceptibility Zoning, Phillip N. Flentje, David Stirling, Darshika Palamakumbure
Faculty of Engineering and Information Sciences - Papers: Part A
The University of Wollongong GIS-based Landslide Inventory is currently being expanded from its Illawarra centric coverage (664 landslides) to include the 31,000km2 geological extent of the Sydney Basin and ultimately all of New South Wales (hereafter this inventory will be referred to as the NSW LI). In 1998, this inventory stood at 319 sites of instability and in 2010 it had grown to 616 landslides. The population of the Sydney Basin in 2006 was approximately 4.9 million people, representing approximately one quarter of the population of Australia. When this current phase of expansion is completed, the NSW LI will include …
Theme-Based Comprehensive Evaluation In New Product Development Using Fuzzy Hierarchical Criteria Group Decision-Making Method, Jie Lu, Jun Ma, Guangquan Zhang, Yijun Zhu, Xianyi Zeng, Ludovic Koehl
Theme-Based Comprehensive Evaluation In New Product Development Using Fuzzy Hierarchical Criteria Group Decision-Making Method, Jie Lu, Jun Ma, Guangquan Zhang, Yijun Zhu, Xianyi Zeng, Ludovic Koehl
Faculty of Engineering and Information Sciences - Papers: Part A
One of the features of the digital ecosystem is the integration of human cognition and socio-economic themes into the process of new product development (NPD). In a socio-economic theme-based NPD, ranking a set of product prototypes that have been designed always requires the participation of multiple evaluators and consideration of multiple evaluation criteria. Using the well-being theme-based garment NPD as a background, this paper first presents a fuzzy hierarchical criteria group decision-making (FHCGDM) method which can effectively calculate final ranking results through fusing all assessment data from human beings and machines. It then presents a garment NPD comprehensive evaluation model …
Development Of A Dc-Lsnd Welding Process For Gmaw On Dh-36 Steel, Raymond Holder, Nathan Larkin, Huijun Li, Lenka Kuzmikova, Zengxi Pan, John Norrish
Development Of A Dc-Lsnd Welding Process For Gmaw On Dh-36 Steel, Raymond Holder, Nathan Larkin, Huijun Li, Lenka Kuzmikova, Zengxi Pan, John Norrish
Faculty of Engineering and Information Sciences - Papers: Part A
Weld induced distortion correction is a major cost within the shipbuilding industry. This paper investigates the use of an active cooling process known as Dynamically Controlled - Low Stress No Distortion (DC-LSND) Welding on DH-36 steel. Thermal profiles are obtained and distortion measurements are also achieved. Results show that the application of a localised cryogenic cooling source trailing the welding arc can significantly reduce weld induced distortion using the GMAW process. The effect of forced cooling on the weld microstructure is also observed.
Development Of A Lifetime Model For Vrla Batteries Used In Wind Turbine Generators, Xiaolin Wang, Stephen Choi, Tieling Zhang, K J. Tseng
Development Of A Lifetime Model For Vrla Batteries Used In Wind Turbine Generators, Xiaolin Wang, Stephen Choi, Tieling Zhang, K J. Tseng
Faculty of Engineering and Information Sciences - Papers: Part A
An approach to predict the remaining lifetime of lead-acid battery is described. The battery is used to provide back-up power to keep essential devices within wind turbine generators operational under emergency conditions. The approach is developed from a circuit model of the battery. From the results of laboratory tests, changes in the model parametric values due to ambient temperature variations, battery aging effects as well as discharge current level have been quantified. Through a developed computational method, the terminal voltage and state of charge of the battery at any other discharging conditions can then be calculated. The discharge profile allows …
Development Of Fully 3d Image Reconstruction Techniques For Pinhole Spect Imaging, Xuezhu Zhang, Yujin Qi
Development Of Fully 3d Image Reconstruction Techniques For Pinhole Spect Imaging, Xuezhu Zhang, Yujin Qi
Faculty of Engineering and Information Sciences - Papers: Part A
The purpose of this study was to develop fully 3D image reconstruction techniques for pinhole SPECT imaging with our Micro-SPECT system. Our studies involve in the derivation of projection operators, analysis of the sampling characteristics of pinhole SPECT imaging in Radon space, development of effective geometric calibration method for system misalignment, and 3D image reconstruction development and implementation with quantitative degrading compensation for pinhole SPECT with both circular and helical scan. The performances of pinhole SPECT imaging were evaluated using computer simulations and experiments with the Ultra-Micro Hot-Spot phantom, Ultra-Micro Defrise phantom and small-animal imaging. The results from the computer …
Research To Establish A Systematic Approach To Safe Welding Procedure Development Using Austenitic Filler Material For Fabrication Of High Strength Steel, Lenka Kuzmikova, John Norrish, Huijun Li, Mark Callaghan
Research To Establish A Systematic Approach To Safe Welding Procedure Development Using Austenitic Filler Material For Fabrication Of High Strength Steel, Lenka Kuzmikova, John Norrish, Huijun Li, Mark Callaghan
Faculty of Engineering and Information Sciences - Papers: Part A
High strength, thermo-mechanically treated steels often require very careful control of welding procedures to ensure freedom from hydrogen assisted cold cracking (HACC) in the weld metal and heat affected zone (HAZ) whilst avoiding undue loss of heat affected zone strength. In practice this leads to restricted operating envelopes and the requirement for rigorous procedure management. An alternative approach is the use of austenitic welding consumables but whilst this may be expected to expand the process parameter envelope its use is often restricted by adherence to procedures previously developed for ferritic consumables. The current paper describes the research undertaken to establish …
Bauschinger Effect In Microalloyed Steels: Part Ii. Influence Of Work Softening On Strength Development During Uoe Line-Pipe Forming, Andrii Kostryzhev, Martin Strangwood, Claire L. Davis
Bauschinger Effect In Microalloyed Steels: Part Ii. Influence Of Work Softening On Strength Development During Uoe Line-Pipe Forming, Andrii Kostryzhev, Martin Strangwood, Claire L. Davis
Faculty of Engineering and Information Sciences - Papers: Part A
The Bauschinger effect (a reduced yield stress at the start of reverse deformation following forward prestrain) is an important factor of strength development for cold metal forming technology. In steels, the magnitude of the Bauschinger effect depends on composition, through the presence of microalloy precipitates, and prior processing, through the size and distribution of the microalloy precipitates and the presence of retained work hardening. In this article, the parameters of the Bauschinger effect and work hardening (coefficient and exponent) in forward and reverse deformations were quantitatively related to the particle number density and dislocation density for two high-strength low-alloy (HSLA) …
Knowledge Sharing Through Virtual Layers In Regional Sustainable Development Networks, Rosemary A. Van Der Meer, Luba Torlina, Jamie Mustard
Knowledge Sharing Through Virtual Layers In Regional Sustainable Development Networks, Rosemary A. Van Der Meer, Luba Torlina, Jamie Mustard
Faculty of Engineering and Information Sciences - Papers: Part A
Our research examines how the organisational structure facilitates knowledge sharing within the group. This case study examines a Victorian regional sustainable group using interviews and social network analysis to identify the group's organisational structure and its effect on knowledge sharing between the members. Our findings indicate that while the mixed membership, lack of hierarchy and layered structure are complex, these elements work together to provide members with a rich body of knowledge. The diversity and differences in membership are complimentary and combined can provide a more in-depth understanding of the regional sustainable development issues.
Mechanical Property Development During Uoe Forming Of Large Diameter Pipeline Steels, Andrii Kostryzhev, Martin Strangwood, Claire L. Davis
Mechanical Property Development During Uoe Forming Of Large Diameter Pipeline Steels, Andrii Kostryzhev, Martin Strangwood, Claire L. Davis
Faculty of Engineering and Information Sciences - Papers: Part A
Mechanical properties of large diameter welded steel pipes depend on the thermomechanically controlled rolled (TMCR) plate microstructure and UOE pipe-forming cold deformation sequence. Strength from plate to pipe may increase (work-hardening) or decrease (the Bauschinger effect). Bauschinger effect parameters depend on steel composition and plate processing history. The present study is examining two pipeline grades: X60 (Nb-alloyed) and X65 (Nb- and V-alloyed). Mechanical properties are determined by grain refinement, solid solution, precipitation strengthening mechanisms, and work-hardening (work-softening). The reverse deformation yield drop increases with an increase in the precipitate particle volume fraction and pre-strain. Annealing, leading to a decrease in …
Development Of A Simplified Readout For A Compact Gamma Camera Based On 2×2 H8500 Multi-Anode Pspmt Array, Yujin Qi, Meng Liu, Xuezhu Zhang, Cuilan Zhao, Jian Song, Hualin Zhang
Development Of A Simplified Readout For A Compact Gamma Camera Based On 2×2 H8500 Multi-Anode Pspmt Array, Yujin Qi, Meng Liu, Xuezhu Zhang, Cuilan Zhao, Jian Song, Hualin Zhang
Faculty of Engineering and Information Sciences - Papers: Part A
The aim of this study was to develop a highperformance simplified readout electronic for a compact gamma camera to achieve a maximized performance in its intrinsic spatial resolution. This compact camera is based on a pixellated NaI(Tl) crystal with 1.2 mm×1.2 mm×5 mm pixel element and 1.4 mm pixel pitch coupled to a 2×2 Hamamatsu H8500 multi-anode position sensitive photomultiplier tube (PSPMT) array. The design of the simplified readout is based on novel two-stage charge divisions with Truncated Center-of-Gravity (TCOG) positioning method to maximize the detector performance. The performance of the compact camera with the novel simplified readout was evaluated …
Development Of Hydraulic Fracturing In High Stress Conditions In Australian Underground Coal Mines, Dennis John Black, Naj Aziz
Development Of Hydraulic Fracturing In High Stress Conditions In Australian Underground Coal Mines, Dennis John Black, Naj Aziz
Faculty of Engineering and Information Sciences - Papers: Part A
Hydraulic fracturing has been used extensively in the petroleum and coalbed methane industries as a means of improving access to the reservoir and thereby enhancing production. In the Australian coal mining industry there has been an aversion to the use of hydraulic fracturing. One of the main reasons for the lack of application of this technology has been the perceived risk of damage to the strata and the resulting impact on future mining operations. A number of Australian mines are progressing toward areas where gas drainage is becoming increasingly difficult and these mines are seriously considering the use of hydraulic …
Development And Characterization Of A High-Resolution Microspect System For Small-Animal Imaging, Yujin Qi, Benjamin Tsui, Yuchuan Wang, Brian Yoder, R Wojcik, S Majewski, A G Weisenberger
Development And Characterization Of A High-Resolution Microspect System For Small-Animal Imaging, Yujin Qi, Benjamin Tsui, Yuchuan Wang, Brian Yoder, R Wojcik, S Majewski, A G Weisenberger
Faculty of Engineering and Information Sciences - Papers: Part A
We developed a high-resolution microSPECT system and investigated its performance characteristics for small animal imaging. The microSPECT system consists of a stationary compact gamma camera with interchangeable pinhole and parallel-hole collimators and vertical object rotation mechanism. The modular camera is based on a pixellated NaI(Tl) crystal array with 1.2 mm pixel size and 1.4 mm pixel pitch coupled to a 5” diameter Hamamatsu R3292 PSPMT. The pinhole collimator has a 10cm focal length fitted with keel-edge pinhole apertures with diameters of 1.0, 1.5 and 2.0 mm. The system performance was characterized by the measurements of the point source response function …
Role Of Cr And P Additions In The Development Of Microstructure And Texture In Annealed Low Carbon Steels, E V. Pereloma, I B. Timokhina, A I. Nosenkov, J J. Jonas
Role Of Cr And P Additions In The Development Of Microstructure And Texture In Annealed Low Carbon Steels, E V. Pereloma, I B. Timokhina, A I. Nosenkov, J J. Jonas
Faculty of Engineering and Information Sciences - Papers: Part A
The recrystallisation behaviour of four warm rolled steels was investigated during annealing. The extra-low carbon (ELC) steel displayed the highest rate of recrystallisation, the steels with additions of chromium and phosphorus (LC(Cr)), (LC(Cr,P)) recrystallised at intermediate rates, while the interstitial-free (IF) steel exhibited the lowest rate. The additions of Cr and Cr/P increased the fraction of g-fibre in the annealing textures compared to that present in the ELC steel; this effect was particularly pronounced up to 50 % recrystallisation. After the completion of recrystallisation, the steel textures were characterized by a dominant g-fibre in the IF steel, while in the …
Landslide Risk Assessment - Development Of A Hazard Consequence Approach, Chit Ko Ko, Phillip N. Flentje, Robin N. Chowdhury
Landslide Risk Assessment - Development Of A Hazard Consequence Approach, Chit Ko Ko, Phillip N. Flentje, Robin N. Chowdhury
Faculty of Engineering and Information Sciences - Papers: Part A
Several Landslide Hazard and Risk Assessment methods have been developed and used in the State of New South Wales (NSW), Australia. The Rail Services Australia Geotechnical Services and the Roads and Traffic Authority of NSW have each developed Risk Assessment procedures suitable to their own specific needs. A generic risk management methodology is presented in the Australian Standard/New Zealand Standard (AS/NZS) 4360:1995. An approach similar to the (AS/NZS) 4360:1995 Risk Management Standard has been applied by a NSW State Emergency Services geotechnical team (which included one of the writers) to 191 problem sites in the Wollongong Area, following a major …
Precursory Localization And Development Of Microfractures Along The Ultimate Fracture Plane In Amphibolite Under Triaxial Creep, Takashi Satoh, Shivakumar Karekal, Osamu Nishizawa, K Kusunose
Precursory Localization And Development Of Microfractures Along The Ultimate Fracture Plane In Amphibolite Under Triaxial Creep, Takashi Satoh, Shivakumar Karekal, Osamu Nishizawa, K Kusunose
Faculty of Engineering and Information Sciences - Papers: Part A
In a triaxial creep experiment in amphibolite, we clearly found a precursorylo calizationa nd developmento f microfracturesa long the final fracture planeu singa n AE (acoustice missions) ourcelo cation technique.T he precursorylo calizationo f AE hypocenters first nucleatedn ear a pre-existingm acroscopidc efecta ndt hene xtendedg raduallya longt hef inalf racture plane prior to failure. On the other hand, no significant precursorylo calizationo f AE hypocenteros n the final fracture plane before failure has been reported in rock samplesf ree of pre-existingm acroscopidce fects. This differencein AE occurrencep atterns beforef ailure could be explainedb y the differencein the degreeo f …
Geological And Land Instability Mapping Using A Gis Package As A Building Block For The Development Of A Risk Assessment Procedure, R N. Chowdhury, P N. Flentje
Geological And Land Instability Mapping Using A Gis Package As A Building Block For The Development Of A Risk Assessment Procedure, R N. Chowdhury, P N. Flentje
Faculty of Engineering and Information Sciences - Papers: Part A
A modern land instability risk assessment procedure must include an accurate geological framework and land instability database. Geological and land instability mapping of the northern suburbs of the City of Wollongong represents a considerable challenge and is to be achieved using computer generated 1:4000 topographic base maps. Using an integrated series of techniques, including computer modelling of the escarpment geology and field mapping techniques, a new series of geological maps has been produced. Meanwhile an exhaustive land instability database of the region has been compiled. A flexible approach to mapping and data compilation is very useful and confirms the viability …