Physical Sciences and Mathematics Commons^™

Data Driven And Machine Learning Based Modeling And Predictive Control Of Combustion At Reactivity Controlled Compression Ignition Engines, Behrouz Khoshbakht Irdmousa

Dissertations, Master's Theses and Master's Reports

Reactivity Controlled Compression Ignition (RCCI) engines operates has capacity to provide higher thermal efficiency, lower particular matter (PM), and lower oxides of nitrogen (NOx) emissions compared to conventional diesel combustion (CDC) operation. Achieving these benefits is difficult since real-time optimal control of RCCI engines is challenging during transient operation. To overcome these challenges, data-driven machine learning based control-oriented models are developed in this study. These models are developed based on Linear Parameter-Varying (LPV) modeling approach and input-output based Kernelized Canonical Correlation Analysis (KCCA) approach. The developed dynamic models are used to predict combustion timing (CA50), indicated mean effective pressure (IMEP), …

A Design Strategy To Improve Machine Learning Resiliency Of Physically Unclonable Functions Using Modulus Process, Yuqiu Jiang

Theses and Dissertations

Physically unclonable functions (PUFs) are hardware security primitives that utilize non-reproducible manufacturing variations to provide device-specific challenge-response pairs (CRPs). Such primitives are desirable for applications such as communication and intellectual property protection. PUFs have been gaining considerable interest from both the academic and industrial communities because of their simplicity and stability. However, many recent studies have exposed PUFs to machine-learning (ML) modeling attacks. To improve the resilience of a system to general ML attacks instead of a specific ML technique, a common solution is to improve the complexity of the system. Structures, such as XOR-PUFs, can significantly increase the nonlinearity …

Ai Assisted Workflows For Computational Electromagnetics And Antenna Design, Oameed Noakoasteen

Electrical and Computer Engineering ETDs

These days large volumes of data can be recorded and manipulated with relative ease. If valuable information can be extracted from them, these vast amounts of data can be a rich resource not just for the digital economy but also for scientific discovery and development of technology. When it comes to deriving valuable information from data, Machine Learning (ML) emerges as the key solution. To unlock the potential benefits of ML to science and technology, extensive research is needed to explore what algorithms are suitable and how they can be applied.

To shine light on various ways that ML can …

Eddy Current Defect Response Analysis Using Sum Of Gaussian Methods, James William Earnest

Theses and Dissertations

This dissertation is a study of methods to automatedly detect and produce approximations of eddy current differential coil defect signatures in terms of a summed collection of Gaussian functions (SoG). Datasets consisting of varying material, defect size, inspection frequency, and coil diameter were investigated. Dimensionally reduced representations of the defect responses were obtained utilizing common existing reduction methods and novel enhancements to them utilizing SoG Representations. Efficacy of the SoG enhanced representations were studied utilizing common Machine Learning (ML) interpretable classifier designs with the SoG representations indicating significant improvement of common analysis metrics.

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Application Of Distributed Fiber-Optic Sensing For Pressure Predictions And Multiphase Flow Characterization, Gerald Kelechi Ekechukwu

LSU Doctoral Dissertations

In the oil and gas industry, distributed fiber optics sensing (DFOS) has the potential to revolutionize well and reservoir surveillance applications. Using fiber optic sensors is becoming increasingly common because of its chemically passive and non-magnetic interference properties, the possibility of flexible installations that could be behind the casing, on the tubing, or run on wireline, as well as the potential for densely distributed measurements along the entire length of the fiber. The main objectives of my research are to develop and demonstrate novel signal processing and machine learning computational techniques and workflows on DFOS data for a variety of …

Data Preprocessing For Machine Learning Modules, Rawan El Moghrabi

Undergraduate Student Research Internships Conference

Data preprocessing is an essential step when building machine learning solutions. It significantly impacts the success of machine learning modules and the output of these algorithms. Typically, data preprocessing is made-up of data sanitization, feature engineering, normalization, and transformation. This paper outlines the data preprocessing methodology implemented for a data-driven predictive maintenance solution. The above-mentioned project entails acquiring historical electrical data from industrial assets and creating a health index indicating each asset's remaining useful life. This solution is built using machine learning algorithms and requires several data processing steps to increase the solution's accuracy and efficiency. In this project, the …

Computational Models To Detect Radiation In Urban Environments: An Application Of Signal Processing Techniques And Neural Networks To Radiation Data Analysis, Jose Nicolas Gachancipa

Beyond: Undergraduate Research Journal

Radioactive sources, such as uranium-235, are nuclides that emit ionizing radiation, and which can be used to build nuclear weapons. In public areas, the presence of a radioactive nuclide can present a risk to the population, and therefore, it is imperative that threats are identified by radiological search and response teams in a timely and effective manner. In urban environments, such as densely populated cities, radioactive sources may be more difficult to detect, since background radiation produced by surrounding objects and structures (e.g., buildings, cars) can hinder the effective detection of unnatural radioactive material. This article presents a computational model …

Machine Learning With Big Data For Electrical Load Forecasting, Alexandra L'Heureux

Electronic Thesis and Dissertation Repository

Today, the amount of data collected is exploding at an unprecedented rate due to developments in Web technologies, social media, mobile and sensing devices and the internet of things (IoT). Data is gathered in every aspect of our lives: from financial information to smart home devices and everything in between. The driving force behind these extensive data collections is the promise of increased knowledge. Therefore, the potential of Big Data relies on our ability to extract value from these massive data sets. Machine learning is central to this quest because of its ability to learn from data and provide data-driven …

The Bracelet: An American Sign Language (Asl) Interpreting Wearable Device, Samuel Aba, Ahmadre Darrisaw, Pei Lin, Thomas Leonard

Chancellor’s Honors Program Projects

No abstract provided.

The Role Of Transient Vibration Of The Skull On Concussion, Rodrigo Dalvit Carvalho Da Silva

Electronic Thesis and Dissertation Repository

Concussion is a traumatic brain injury usually caused by a direct or indirect blow to the head that affects brain function. The maximum mechanical impedance of the brain tissue occurs at 450±50 Hz and may be affected by the skull resonant frequencies. After an impact to the head, vibration resonance of the skull damages the underlying cortex. The skull deforms and vibrates, like a bell for 3 to 5 milliseconds, bruising the cortex. Furthermore, the deceleration forces the frontal and temporal cortex against the skull, eliminating a layer of cerebrospinal fluid. When the skull vibrates, the force spreads directly to …

Learning Robot Motion From Creative Human Demonstration, Charles C. Dietzel

Theses and Dissertations

This thesis presents a learning from demonstration framework that enables a robot to learn and perform creative motions from human demonstrations in real-time. In order to satisfy all of the functional requirements for the framework, the developed technique is comprised of two modular components, which integrate together to provide the desired functionality. The first component, called Dancing from Demonstration (DfD), is a kinesthetic learning from demonstration technique. This technique is capable of playing back newly learned motions in real-time, as well as combining multiple learned motions together in a configurable way, either to reduce trajectory error or to generate entirely …

Smart City Management Using Machine Learning Techniques, Mostafa Zaman

Theses and Dissertations

In response to the growing urban population, "smart cities" are designed to improve people's quality of life by implementing cutting-edge technologies. The concept of a "smart city" refers to an effort to enhance a city's residents' economic and environmental well-being via implementing a centralized management system. With the use of sensors and actuators, smart cities can collect massive amounts of data, which can improve people's quality of life and design cities' services. Although smart cities contain vast amounts of data, only a percentage is used due to the noise and variety of the data sources. Information and communication technology (ICT) …

A Machine Learning Approach To Intended Motion Prediction For Upper Extremity Exoskeletons, Justin Berdell

Graduate Research Theses & Dissertations

A fully solid-state, software-defined, one-handed, handle-type control device built around a machine-learning (ML) model that provides intuitive and simultaneous control in position and orientation each in a full three degrees-of-freedom (DOF) is proposed in this paper. The device, referred to as the “Smart Handle”, and it is compact, lightweight, and only reliant on low-cost and readily available sensors and materials for construction. Mobility chairs for persons with motor difficulties could make use of a control device that can learn to recognize arbitrary inputs as control commands. Upper-extremity exoskeletons used in occupational settings and rehabilitation require a natural control device like …

Advanced Analytics In Smart Manufacturing: Anomaly Detection Using Machine Learning Algorithms And Parallel Machine Scheduling Using A Genetic Algorithm, Meiling He

Theses and Dissertations

Industry 4.0 offers great opportunities to utilize advanced data processing tools by generating Big Data from a more connected and efficient data collection system. Making good use of data processing technologies, such as machine learning and optimization algorithms, will significantly contribute to better quality control, automation, and job scheduling in Smart Manufacturing. This research aims to develop a new machine learning algorithm for solving highly imbalanced data processing problems, implement both supervised and unsupervised machine learning auto-selection frameworks for detecting anomalies in smart manufacturing, and develop a genetic algorithm for optimizing job schedules on unrelated parallel machines. This research also …

A Deep Recurrent Neural Network With Iterative Optimization For Inverse Image Processing Applications, Masaki Ikuta

Theses and Dissertations

Many algorithms and methods have been proposed for inverse image processing applications, such as super-resolution, image de-noising, and image reconstruction, particularly with the recent surge of interest in machine learning and deep learning methods.

As for Computed Tomography (CT) image reconstruction, the most recently proposed methods are limited to image domain processing, where deep learning is used to learn the mapping between a true image data set and a noisy image data set in the image domain. While deep learning-based methods can produce higher quality images than conventional model-based algorithms, these methods have a limitation. Deep learning-based methods used in …

Analysis Of Deep Learning Methods For Wired Ethernet Physical Layer Security Of Operational Technology, Lucas Torlay

All Theses

The cybersecurity of power systems is jeopardized by the threat of spoofing and man-in-the-middle style attacks due to a lack of physical layer device authentication techniques for operational technology (OT) communication networks. OT networks cannot support the active probing cybersecurity methods that are popular in information technology (IT) networks. Furthermore, both active and passive scanning techniques are susceptible to medium access control (MAC) address spoofing when operating at Layer 2 of the Open Systems Interconnection (OSI) model. This thesis aims to analyze the role of deep learning in passively authenticating Ethernet devices by their communication signals. This method operates at …

Leveraging Machine Learning Techniques Towards Intelligent Networking Automation, Cesar A. Gomez

Electronic Thesis and Dissertation Repository

In this thesis, we address some of the challenges that the Intelligent Networking Automation (INA) paradigm poses. Our goal is to design schemes leveraging Machine Learning (ML) techniques to cope with situations that involve hard decision-making actions. The proposed solutions are data-driven and consist of an agent that operates at network elements such as routers, switches, or network servers. The data are gathered from realistic scenarios, either actual network deployments or emulated environments. To evaluate the enhancements that the designed schemes provide, we compare our solutions to non-intelligent ones. Additionally, we assess the trade-off between the obtained improvements and the …

Continuous-Time And Complex Growth Transforms For Analog Computing And Optimization, Oindrila Chatterjee

McKelvey School of Engineering Theses & Dissertations

Analog computing is a promising and practical candidate for solving complex computational problems involving algebraic and differential equations. At the fundamental level, an analog computing framework can be viewed as a dynamical system that evolves following fundamental physical principles, like energy minimization, to solve a computing task. Additionally, conservation laws, such as conservation of charge, energy, or mass, provide a natural way to couple and constrain spatially separated variables. Taking a cue from these observations, in this dissertation, I have explored a novel dynamical system-based computing framework that exploits naturally occurring analog conservation constraints to solve a variety of optimization …

Forecasting Pedestrian Trajectory Using Deep Learning, Arsal Syed

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this dissertation we develop different methods for forecasting pedestrian trajectories. Complete understanding of pedestrian motion is essential for autonomous agents and social robots to make realistic and safe decisions. Current trajectory prediction methods rely on incorporating historic motion, scene features and social interaction to model pedestrian behaviors. Our focus is to accurately understand scene semantics to better forecast trajectories. In order to do so, we leverage semantic segmentation to encode static scene features such as walkable paths, entry/exits, static obstacles etc. We further evaluate the effectiveness of using semantic maps on different datasets and compare its performance with already …

Hardware For Quantized Mixed-Precision Deep Neural Networks, Andres Rios

Open Access Theses & Dissertations

Recently, there has been a push to perform deep learning (DL) computations on the edge rather than the cloud due to latency, network connectivity, energy consumption, and privacy issues. However, state-of-the-art deep neural networks (DNNs) require vast amounts of computational power, data, and energyâ??resources that are limited on edge devices. This limitation has brought the need to design domain-specific architectures (DSAs) that implement DL-specific hardware optimizations. Traditionally DNNs have run on 32-bit floating-point numbers; however, a body of research has shown that DNNs are surprisingly robust and do not require all 32 bits. Instead, using quantization, networks can run on …

Machine Learning With Topological Data Analysis, Ephraim Robert Love

Doctoral Dissertations

Topological Data Analysis (TDA) is a relatively new focus in the fields of statistics and machine learning. Methods of exploiting the geometry of data, such as clustering, have proven theoretically and empirically invaluable. TDA provides a general framework within which to study topological invariants (shapes) of data, which are more robust to noise and can recover information on higher dimensional features than immediately apparent in the data. A common tool for conducting TDA is persistence homology, which measures the significance of these invariants. Persistence homology has prominent realizations in methods of data visualization, statistics and machine learning. Extending ML with …

Analog Spiking Neural Network Implementing Spike Timing-Dependent Plasticity On 65 Nm Cmos, Luke Vincent

Graduate Theses and Dissertations

Machine learning is a rapidly accelerating tool and technology used for countless applications in the modern world. There are many digital algorithms to deploy a machine learning program, but the most advanced and well-known algorithm is the artificial neural network (ANN). While ANNs demonstrate impressive reinforcement learning behaviors, they require large power consumption to operate. Therefore, an analog spiking neural network (SNN) implementing spike timing-dependent plasticity is proposed, developed, and tested to demonstrate equivalent learning abilities with fractional power consumption compared to its digital adversary.

Machine Learning Morphisms: A Framework For Designing And Analyzing Machine Learning Work Ows, Applied To Separability, Error Bounds, And 30-Day Hospital Readmissions, Eric Zenon Cawi

McKelvey School of Engineering Theses & Dissertations

A machine learning workflow is the sequence of tasks necessary to implement a machine learning application, including data collection, preprocessing, feature engineering, exploratory analysis, and model training/selection. In this dissertation we propose the Machine Learning Morphism (MLM) as a mathematical framework to describe the tasks in a workflow. The MLM is a tuple consisting of: Input Space, Output Space, Learning Morphism, Parameter Prior, Empirical Risk Function. This contains the information necessary to learn the parameters of the learning morphism, which represents a workflow task. In chapter 1, we give a short review of typical tasks present in a workflow, as …

Weakly Supervised Learning For Multi-Image Synthesis, Muhammad Usman Rafique

Theses and Dissertations--Electrical and Computer Engineering

Machine learning-based approaches have been achieving state-of-the-art results on many computer vision tasks. While deep learning and convolutional networks have been incredibly popular, these approaches come at the expense of huge amounts of labeled data required for training. Manually annotating large amounts of data, often millions of images in a single dataset, is costly and time consuming. To deal with the problem of data annotation, the research community has been exploring approaches that require less amount of labelled data.

The central problem that we consider in this research is image synthesis without any manual labeling. Image synthesis is a classic …

Cascaded Deep Learning Network For Postearthquake Bridge Serviceability Assessment, Youjeong Jang

Electronic Theses and Dissertations

Damages assessment of bridges is important to derive immediate response after severe events to decide serviceability. Especially, past earthquakes have proven the vulnerability of bridges with insufficient detailing. Due to lack of a national and unified post-earthquake inspection procedure for bridges, conventional damage assessments are performed by sending professional personnel to the onsite, detecting visually and measuring the damage state. To get accurate and fast damage result of bridge condition is important to save not only lives but also costs.
There have been studies using image processing techniques to assess damage of bridge column without sending individual to onsite. Convolutional …

A Compact Wavelength Meter Using A Multimode Fiber, Ogbole Collins Inalegwu

Masters Theses

“Wavelength meters are very important for precision measurements of both pulses and continuous-wave optical sources. Conventional wavelength meters employ gratings, prisms, interferometers, and other wavelength-sensitive materials in their design. Here, we report a simple and compact wavelength meter based on a section of multimode fiber and a camera. The concept is to correlate the multimodal interference pattern (i.e., speckle pattern) at the end-face of a multimode fiber with the wavelength of the input lightsource. Through a series of experiments, specklegrams from the end face of a multimode fiber as captured by a charge-coupled device (CCD) camera were recorded; the images …

Defense By Deception Against Stealthy Attacks In Power Grids, Md Hasan Shahriar

FIU Electronic Theses and Dissertations

Cyber-physical Systems (CPSs) and the Internet of Things (IoT) are converging towards a hybrid platform that is becoming ubiquitous in all modern infrastructures. The integration of the complex and heterogeneous systems creates enormous space for the adversaries to get into the network and inject cleverly crafted false data into measurements, misleading the control center to make erroneous decisions. Besides, the attacker can make a critical part of the system unavailable by compromising the sensor data availability. To obfuscate and mislead the attackers, we propose DDAF, a deceptive data acquisition framework for CPSs' hierarchical communication network. Each switch in the hierarchical …

Forecasting Vegetation Health In The Mena Region By Predicting Vegetation Indicators With Machine Learning Models, Sachi Perera, Wenzhao Li, Erik Linstead, Hesham El-Askary

Mathematics, Physics, and Computer Science Faculty Articles and Research

Machine learning (ML) techniques can be applied to predict and monitor drought conditions due to climate change. Predicting future vegetation health indicators (such as EVI, NDVI, and LAI) is one approach to forecast drought events for hotspots (e.g. Middle East and North Africa (MENA) regions). Recently, ML models were implemented to predict EVI values using parameters such as land types, time series, historical vegetation indices, land surface temperature, soil moisture, evapotranspiration etc. In this work, we collected the MODIS atmospherically corrected surface spectral reflectance imagery with multiple vegetation related indices for modeling and evaluation of drought conditions in the MENA …

Evaluation Of Standard And Semantically-Augmented Distance Metrics For Neurology Patients, Daniel B. Hier, Jonathan Kopel, Steven U. Brint, Donald C. Wunsch, Gayla R. Olbricht, Sima Azizi, Blaine Allen

Electrical and Computer Engineering Faculty Research & Creative Works

Background: Patient distances can be calculated based on signs and symptoms derived from an ontological hierarchy. There is controversy as to whether patient distance metrics that consider the semantic similarity between concepts can outperform standard patient distance metrics that are agnostic to concept similarity. The choice of distance metric can dominate the performance of classification or clustering algorithms. Our objective was to determine if semantically augmented distance metrics would outperform standard metrics on machine learning tasks.

Methods: We converted the neurological findings from 382 published neurology cases into sets of concepts with corresponding machine-readable codes. We calculated patient distances by …