Physical Sciences and Mathematics Commons^™

Ambient Facile Synthesis Of Gram-Scale Copper Selenide Nanostructures From Commercial Copper And Selenium Powder, Xinqi Chen, Zhen Li, S X. Dou

Australian Institute for Innovative Materials - Papers

Grams of copper selenides (Cu_2-xSe) were prepared from commercial copper and selenium powders in the presence of thiol ligands by a one-pot reaction at room temperature. The resultant copper selenides are a mixture of nanoparticles and their assembled nanosheets, and the thickness of nanosheets assembled is strongly dependent on the ratio of thiol ligand to selenium powder. The resultant Cu_2-xSe (0 ≤ x ≤ 0.25) nanostructures were treated with hydrazine solution to remove the surface ligands and then explored as a potential thermoelectric candidate in comparison with commercial copper selenide powders. The research provides a novel …

Forum Proceedings From “Uavs: Pros Vs Cons Symposium” In Toronto, Canada, June 2013, Katina Michael

Associate Professor Katina Michael

Unmanned Aerial Systems (UAS), widely referred to as drones, are becoming increasingly relevant in civilian as well as military applications. UAS have been used by emergency services to help respond to and map environmental crises, to find missing people, to fight fires, and respond to traffic accidents. Their use in policing and border patrol functions is being trialled in many Western countries. Like other recent technologies (mobile phones etc), as they become cheaper and easier to use, they are likely to become much more prevalent in civilian life across a range of applications.

This conference will examine the current state …

Influence Of Capping On The Atomistic Arrangement In Palladium Nanoparticles At Room Temperature, Gaston Corthey, Jimena A. Olmos-Asar, Gilberto Casillas, Marcelo M. Mariscal, Sergio Mejia-Rosales, Julio C. Azcarate, Eduardo Larios, Miguel Jose-Yacaman, Roberto Salvarezza, M Fonticelli

Australian Institute for Innovative Materials - Papers

The role that protecting molecules have on the way that palladium atoms arrange themselves in nanoparticles prepared at room temperature was studied by the analysis of aberration-corrected scanning transmission electron microscopy images and atomistic Langevin dynamics simulations. It was found that the arrangement of Pd atoms is less ordered in thiolate-protected nanoparticles than in amine-protected ones. The experimental and theoretical data showed that the disorder in ∼3 nm thiolate-protected particles is promoted by the strong S-Pd bond in the sulfide layer that surrounds the nanoparticles.

Microscopic Model For Exchange Bias From Grain-Boundary Disorder In A Ferromagnet/Antiferromagnet Thin Film With A Nanocrystalline Microstructure, David L. Cortie, A G. Biternas, R W. Chantrell, Xiaolin Wang, Frank Klose

Australian Institute for Innovative Materials - Papers

Monte Carlo spin simulations were coupled to a Voronoi microstructure-generator to predict the magnitude and behavior of exchange bias in a ferromagnet/antiferromagnet (AF) thin film bilayer with a nanocrystalline microstructure. Our model accounts for the effects of irregular grain-shapes, finite-sized particles, and the possible presence of local random-fields originating from the antiferromagnet's grain-boundary regions. As the grain-boundary represents a crystal-structure distortion, we model the local effect on the exchange constants in the Gaussian approximation which can cause regions resembling a spin glass confined to an unusual 2D topology. Although an ensemble of completely disconnected AF grains isolated by non-magnetic barriers …

Facile Synthesis Of Highly Efficient One-Dimensional Plasmonic Photocatalysts Through Ag@Cu2o Core-Shell Heteronanowires, Jinyan Xiong, Zhen Li, Jun Chen, Shanqing Zhang, Lianzhou Wang, S X. Dou

Australian Institute for Innovative Materials - Papers

A novel class of one-dimensional (1D) plasmonic Ag@Cu2O core-shell heteronanowires have been synthesized at room temperature for photocatalysis application. The morphology, size, crystal structure and composition of the products were investigated by XRD, SEM, TEM, XPS, and UV-vis instruments. It was found the reaction time and the amount of Ag nanowires play crucial roles in the formation of well-defined 1D Ag@Gu(2)O core-shell heteronanowires. The resultant 1D Ag@Cu2O NWs exhibit much higher photocatalytic activity toward degradation of organic contaminants than Ag@Cu2O core-shell nanopartides or pure Cu2O nanospheres under solar light irradiation. The drastic enhancement in photocatalytic activity could be attributed to …

Tio2 Coated Three-Dimensional Hierarchically Ordered Porous Sulfur Electrode For The Lithium/Sulfur Rechargeable Batteries, Hongqiang Wang, Sha Li, Dan Li, Zhixin Chen, Hua-Kun Liu, Zaiping Guo

Australian Institute for Innovative Materials - Papers

A three-dimensional (3D) hierarchically ordered mesoporous carbon-sulfur composite slice coated with a thin TiO2 layer has been synthesized by a low-cost process and investigated as a cathode for the lithium-sulfur batteries. The TiO2 coated carbon sulfur composite thin slice works as a binder-free cathode without any current collectors for lithium-sulfur batteries. The hierarchical architecture provides a 3D conductive network for electron transfer, open channels for ion diffusion and strong confinement of soluble polysulfides. Meanwhile, TiO2 (titanium dioxide) coating layer could further effectively prevent the dissolution of polysulfides and also improve the strength of the entire electrode, thereby enhancing the electrochemical …

Mesoporous Hexagonal Co3o4 For High Performance Lithium Ion Batteries, Dawei Su, Xiuqiang Xie, Paul Munroe, S X. Dou, Guoxiu Wang

Australian Institute for Innovative Materials - Papers

Mesoporous Co3O4 nanoplates were successfully prepared by the conversion of hexagonal beta-Co(OH)(2) nanoplates. TEM, HRTEM and N-2 sorption analysis confirmed the facet crystal structure and inner mesoporous architecture. When applied as anode materials for lithium storage in lithium ion batteries, mesoporous Co3O4 nanocrystals delivered a high specific capacity. At 10 degrees C current rate, as-prepared mesoporous Co3O4 nanoplates delivered a specific capacity of 1203 mAh/g at first cycle and after 200 cycles it can still maintain a satisfied value (330 mAh/g). Fromex-situ TEM, SAED and FESEM observation, it was found that mesoporous Co3O4 nanoplates were reduced to Li2O and Co …

Tuning The Band Gap In Silicene By Oxidation, Yi Du, Jincheng Zhuang, Hongsheng Liu, Xun Xu, Stefan Eilers, Kehui Wu, Peng Cheng, Jijun Zhao, Xiaodong Pi, Khay Wai See, Germanas Peleckis, Xiaolin Wang, S X. Dou

Australian Institute for Innovative Materials - Papers

Silicene monolayers grown on Ag(111) surfaces demonstrate a band gap that is tunable by oxygen adatoms from semimetallic to semiconducting type. With the use of low-temperature scanning tunneling microscopy, we find that the adsorption configurations and amounts of oxygen adatoms on the silicene surface are critical for band gap engineering, which is dominated by different buckled structures in √13 x √13, 4 x 4, and 2√3 x 2√3 silicene layers. The Si-O-Si bonds are the most energy-favored species formed on √13 x √13, 4 x 4, and 2√3 x 2√3 structures under oxidation, which is verified by in situ Raman …

Force Control Of A Tri-Layer Conducting Polymer Actuator Using Optimized Fuzzy Logic Control, Mehmet Itik, Mohammadreza Sabetghadam, Gursel Alici

Australian Institute for Innovative Materials - Papers

Conducting polymers actuators (CPAs) are potential candidates for replacing conventional actuators in various fields, such as robotics and biomedical engineering, due to their advantageous properties, which includes their low cost, light weight, low actuation voltage and biocompatibility. As these actuators are very suitable for use in micro-nano manipulation and in injection devices in which the magnitude of the force applied to the target is of crucial importance, the force generated by CPAs needs to be accurately controlled. In this paper, a fuzzy logic (FL) controller with a Mamdani inference system is designed to control the blocking force of a trilayer …

Sulfur-Graphene Nanostructured Cathodes Via Ball-Milling For High-Performance Lithium-Sulfur Batteries, Jiantie Xu, Jianglan Shui, Jianli Wang, Min Wang, Hua-Kun Liu, S X. Dou, In-Yup Jeon, Jeong-Min Seo, Jong-Beom Baek, Liming Dai

Australian Institute for Innovative Materials - Papers

Although much progress has been made to develop high-performance lithium-sulfur batteries (LSBs), the reported physical or chemical routes to sulfur cathode materials are often multistep/complex and even involve environmentally hazardous reagents, and hence are infeasible for mass production. Here, we report a simple ball-milling technique to combine both the physical and chemical routes into a one-step process for low-cost, scalable, and eco-friendly production of graphene nanoplatelets (GnPs) edge-functionalized with sulfur (S-GnPs) as highly efficient LSB cathode materials of practical significance. LSBs based on the S-GnP cathode materials, produced by ball-milling 70 wt % sulfur and 30 wt % graphite, delivered …

Uncoupled Surface Spin Induced Exchange Bias In Alpha-Mno2 Nanowires, W Li, R Zeng, Ziqi Sun, Dongliang Tian, S X. Dou

Australian Institute for Innovative Materials - Papers

We have studied the microstructure, surface states, valence fluctuations, magnetic properties, and exchange bias effect in MnO2 nanowires. High purity alpha-MnO2 rectangular nanowires were synthesized by a facile hydrothermal method with microwave-assisted procedures. The microstructure analysis indicates that the nanowires grow in the [0 0 1] direction with the (2 1 0) plane as the surface. Mn3+ and Mn2+ ions are not found in the system by X-ray photoelectron spectroscopy. The effective magnetic moment of the manganese ions fits in with the theoretical and experimental values of Mn4+ very well. The uncoupled spins in 3d(3) orbitals of the Mn4+ ions …

Study On Vanadium Substitution To Iron In Li2fep 2o7 As Cathode Material For Lithium-Ion Batteries, Jiantie Xu, Shulei Chou, Qinfen Gu, M F. Md Din, Hua-Kun Liu, S X. Dou

Australian Institute for Innovative Materials - Papers

A series of Li2Fe1-3x/2VxP 2O7 (x = 0, 0.025, 0.05, 0.075, and 0.1) cathode materials for LIBs were prepared by the sol-gel method. Structural characterization of Li2Fe1-3x/2VxP2O7 (x = 0, 0.025, 0.05, 0.075, and 0.1) samples was conducted by synchrotron X-ray diffraction. The morphology and oxidation states of Fe2+ and V 3+ in the Li2Fe1-3x/2VxP 2O7 samples were confirmed by scanning electron microscopy and magnetic susceptibility measurements, respectively. The electrochemical measurements indicated that Li2Fe1-3x/2VxP 2O7 (x = 0.025) delivered the higher reversible capacity of 79.9 mAh g-1 at 1 C in the voltage range of 2.0 - 4.5 V with …

Biocompatible Ionic Liquid-Biopolymer Electrolyte Enabled Thin And Compact Magnesium Air Batteries, Xiaoteng Jia, Yang Yang, Caiyun Wang, Chen Zhao, R Vijayaraghavan, Douglas R. Macfarlane, Maria Forsyth, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

With the surge of interest in miniaturized implanted medical devices (IMDs), implantable power sources with small dimensions and biocompatibility are in high demand. Implanted battery/supercapacitor devices are commonly packaged within a case that occupies a large volume, making miniaturization difficult. In this study, we demonstrate a polymer electrolyte-enabled biocompatible magnesium-air battery device with a total thickness of approximately 300 μm. It consists of a biocompatible polypyrrole-para(toluene sulfonic acid) cathode and a bioresorbable magnesium alloy anode. The biocompatible electrolyte used is made of choline nitrate (ionic liquid) embedded in a biopolymer, chitosan. This polymer electrolyte is mechanically robust and offers a …

Effects Of Oxygen Adsorption On The Surface State Of Epitaxial Silicene On Ag(111), Xun Xu, Jincheng Zhuang, Yi Du, Haifeng Feng, N Zhang, Chen Liu, Tao Lei, Jiaou Wang, M Spencer, Tetsuya Morishita, Xiaolin Wang, S X. Dou

Australian Institute for Innovative Materials - Papers

Epitaxial silicene, which is one single layer of silicon atoms packed in a honeycomb structure, demonstrates a strong interaction with the substrate that dramatically affects its electronic structure. The role of electronic coupling in the chemical reactivity between the silicene and the substrate is still unclear so far, which is of great importance for functionalization of silicene layers. Here, we report the reconstructions and hybridized electronic structures of epitaxial 4 3 4 silicene on Ag(111), which are revealed by scanning tunneling microscopy and angle-resolved photoemission spectroscopy. The hybridization between Si and Ag results in a metallic surface state, which can …

The Formation Of Nano-Layered Grains And Their Enhanced Superconducting Transition Temperature In Mg-Doped Fese0.9 Bulks, Feng Lan, Zongqing Ma, Yongchang Liu, Ning Chen, Qi Cai, Huijun Li, Shaon Barua, Dipakkumar Patel, Md Shahriar Hossain, Jung Ho Kim, S X. Dou

Australian Institute for Innovative Materials - Papers

To search a proper dopant to further improve superconductivity in 11 type Fe-based superconductors makes sense to both their superconductivity mechanism and possible technological applications. In present work, Mg doped FeSe polycrystalline bulks were obtained by a two-step solid-state reaction method. Even though there are many MgSe and iron impurities existing in the Mg heavy doped FeSe bulks, they exhibit obviously increased T_c compared to undoped FeSe sample. It was found that Mg addition has little effect on the crystal lattice parameters of superconducting beta-FeSe, whereas leads to the formation of nano-layered grain structure consisted of MgSe and beta-FeSe …

A Triblock-Copolymer-Templating Route To Carbon Spheres@Sba-15 Large Mesopore Core-Shell And Hollow Structures, Jianping Yang, Xianghong Qian, Minjun Chen, Jianwei Fan, Hua-Kun Liu, Weixian Zhang

Australian Institute for Innovative Materials - Papers

The fabrication of mesoporous core-shell and hollow spheres with ordered mesostructures and tunable large pore sizes is highly desirable for fundamental research and practical applications. A direct triblock-copolymer-templating coating approach has been provided for the synthesis of carbon sphere@mesoporous silica core-shell (CS@SBA-15) and hollow structures in an acidic medium at room temperature. These CS@SBA-15 core-shell structures possess large mesopores (6.3-8.4 nm), high surface areas (318.1-438.4 m² g^-1) and large pore volumes (0.31-0.36 cm³ g^-1). The corresponding hollow mesoporous silica spheres (HMSS) with controllable mesopores (6.0-8.2 nm), high surface areas (239.9-326.5 m² g^{-1 …}

Modeling Transport Properties Of Inhomogeneous Superconductor-Metal Composites, A Borroto, L Del Rio, M Arronte, Tom Johansen, E Altshuler

Australian Institute for Innovative Materials - Papers

We propose a model for a superconductor-metal composite that allows to derive intrinsic transport properties of the superconducting phase based on 2D images of its cross section, and a minimal set of parameters. The method is tested experimentally by using, as model composite, a "transversal bridge" made on a Bi₂Sr₂Ca₂Cu₃O_10+x (BSCCO)-Ag multi-filamentary tape. It is shown that the approach allows to predict the measured I−⟨E⟩ curves of the filaments. In addition, one can determine the critical current anisotropy between the longitudinal and transverse directions of the Ag-BSCCO tape, and also of …

Charged-Controlled Separation Of Nitrogen From Natural Gas Using Boron Nitride Fullerene, Qiao Sun, Caixia Sun, Aijun Du, Zhen Li

Australian Institute for Innovative Materials - Papers

Natural gas (the main component is methane) has been widely used as a fuel and raw material in industry. Removal of nitrogen (N₂) from methane (CH₄) can reduce the cost of natural gas transport and improve its efficiency. However, their extremely similar size increases the difficulty of separating N₂ from CH₄. In this study, we have performed a comprehensive investigation of N₂ and CH₄ adsorption on different charge states of boron nitride (BN) nanocage fullerene, B₃₆N₃₆, by using a density functional theory approach. The calculational results indicate …

Electrically Contractile Polymers Augment Right Ventricular Output In The Heart, Arjang Ruhparwar, Patricia Piontek, Matthias Ungerer, Ali Ghodsizad, Sasan Partovi, Javad Foroughi, Gabor Szabo, Mina Farag, Matthias Karck, Geoffrey M. Spinks, Seon Jeong Kim

Australian Institute for Innovative Materials - Papers

Research into the development of artificial heart muscle has been limited to assembly of stem cell-derived cardiomyocytes seeded around a matrix, while nonbiological approaches to tissue engineering have rarely been explored. The aim of the study was to apply electrically contractile polymer-based actuators as cardiomyoplasty for positive inotropic support of the right ventricle. Complex trilayer polypyrrole (PPy) bending polymers for high-speed applications were generated. Bending motion occurred directly as a result of electrochemically driven charging and discharging of the PPy layers. In a rat model (n=5), strips of polymers (3x20mm) were attached and wrapped around the right ventricle …

Na3v2(Po4)3 Particles Partly Embedded In Carbon Nanofibers With Superb Kinetics For Ultra-High Power Sodium Ion Batteries, Junghoon Yang, Dongwook Han, Mi Ru Jo, Kyeongse Song, Yongil Kim, Shulei Chou, Hua-Kun Liu, Yong-Mook Kang

Australian Institute for Innovative Materials - Papers

We here describe the extraordinary performance of NASICON Na₃V₂(PO₄)₃-carbon nanofiber (NVP-CNF) composites with ultra-high power and excellent cycling performance. NVP-CNFs are composed of CNFs at the center part and partly embedded NVP nanoparticles in the shell. We first report this unique morphology of NVP-CNFs for the electrode material of secondary batteries as well as for general energy conversion materials. Our NVP-CNFs show not only a high discharge capacity of approx. 88.9 mA h g^-1 even at a high current density of 50 C but also approx. 93% cyclic retention property after …

Novel Germanium/Polypyrrole Composite For High Power Lithium-Ion Batteries, Xuanwen Gao, Wenbin Luo, Chao Zhong, David Wexler, Shulei Chou, Hua-Kun Liu, Zhicong Shi, Guohua Chen, Kiyoshi Ozawa, Jiazhao Wang

Australian Institute for Innovative Materials - Papers

Nano-Germanium/polypyrrole composite has been synthesized by chemical reduction method in aqueous solution. The Ge nanoparticles were directly coated on the surface of the polypyrrole. The morphology and structural properties of samples were determined by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Thermogravimetric analysis was carried out to determine the polypyrrole content. The electrochemical properties of the samples have been investigated and their suitability as anode materials for the lithium-ion battery was examined. The discharge capacity of the Ge nanoparticles calculated in the Ge-polypyrrole composite is 1014 mAh g^-1 after 50 cycles at 0.2 C rate, which is …

Optical And Electrochemical Methods For Determining The Effective Area And Charge Density Of Conducting Polymer Modified Electrodes For Neural Stimulation, Alexander R. Harris, Paul Molino, Robert M. I Kapsa, Graeme M. Clarke, Antonio Paolini, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

Neural stimulation is used in the cochlear implant, bionic eye, and deep brain stimulation, which involves implantation of an array of electrodes into a patient's brain. The current passed through the electrodes is used to provide sensory queues or reduce symptoms associated with movement disorders and increasingly for psychological and pain therapies. Poor control of electrode properties can lead to suboptimal performance; however, there are currently no standard methods to assess them, including the electrode area and charge density. Here we demonstrate optical and electrochemical methods for measuring these electrode properties and show the charge density is dependent on electrode …

Hierarchical Porous Li 2 Mg(Nh)2@C Nanowires With Long Cycle Life Towards Stable Hydrogen Storage, Guanglin Xia, Yingbin Tan, Dan Li, Zaiping Guo, Hua-Kun Liu, Zongwen Liu, Xuebin Yu

Australian Institute for Innovative Materials - Papers

The hierarchical porous Li₂Mg(NH)₂@C nanowires full of micropores, mesopores, and macropores are successfully fabricated via a single-nozzle electrospinning technique combined with in-situ reaction between the precursors, i.e., MgCl₂ and LiN₃, under physical restriction upon thermal annealing. The explosive decomposition of LiN₃ well dispersed in the electrospun nanowires during carbothermal treatment induces a highly porous structure, which provides a favourable way for H₂ delivering in and out of Li₂Mg(NH)₂ nanoparticles simultaneously realized by the space-confinement of the porous carbon coating. As a result, the thus-fabricated Li₂Mg(NH)_{2 …}

Α-Fe2o3/Graphene Nanocomposite As Anode Material For Sodium-Ion Batteries With Enhanced Capacity Retention, Zhijia Zhang, Yunxiao Wang, Shulei Chou, Huijun Li, Hua-Kun Liu, Jiazhao Wang

Australian Institute for Innovative Materials - Papers

Among the different energy storage systems, rechargeable lithium-ion batteries (LIBs) have been widely applied in various portable electronic devices due to their high energy densities, long cycle life, and lack of significant memory effect [1]. For wide-scale implementation of renewable energy, LIBs, however, face challenges related to their safety, lifetime, and cost. Based on the wide availability and low cost of sodium, sodium-ion batteries (SIBs) have the potential for meeting the demands of large-scale and sustainable applications. Many cathode materials have been proposed, whereas only a few anode materials have been investigated for SIBs [2]. The sodium ion (1.02 Å) …

Impacts Of Crystal Orientation Of Gaas On The Interfacial Structures And Electrical Properties Of Hf0.6la0.4ox Films, Tingting Jia, Hideo Kimura, Hongyang Zhao, Qiwen Yao, Zhenxiang Cheng, Xinghong Cheng, Yuehui Yu

Australian Institute for Innovative Materials - Papers

One of the major challenges in realizing the GaAs channel in the metal oxide semiconductor field effect transistor is the degrading in electron transport properties at the interface between GaAs and the gate oxide. In this study, Hf_0.6La_0.4O_x gate oxide films were deposited at a low temperature (200 °C) on GaAs(111)A and GaAs(100) substrates by plasma enhanced atomic layer deposition. Microstructure analysis indicates that residuals of gallium oxide, arsenic oxide, and As element remained at the interface of Hf_0.6La_0.4O_x/GaAs(100). On contrast, a smoother interface is observed between Hf_{0.6 …}

Magnetic Properties And Magnetocaloric Effect In Layered Ndmn1.9ti0.1si2, M F. Md Din, Jianli Wang, Shane J. Kennedy, Stewart J. Campbell, S X. Dou

Australian Institute for Innovative Materials - Papers

The structural and magnetic properties of the NdMn_1.9Ti_0.1Si₂ compund have been studied by high-intensity x-ray and high-resolution neutron powder diffraction, specific heat, dc magnetization, and differential scanning calorimetry measurements over the temperature range of 3-450 K. The Curie temperature and Néel temperature of layered NdMn_1.9Ti_0.1Si₂ are indicated as T_C ~ 22 K and T_N ~ 374 K respectively. The first order magnetic transition from antiferromagnetic [AFil-type] to ferromagnetic [F(Nd)+Fmc] around T_C is found in layered NdMn_1.9Ti_0.1Si₂ and is …

Liquid Crystalline Graphene Oxide/Pedot: Pss Self-Assembled 3d Architecture For Binder-Free Supercapacitor Electrodes, Md. Monirul Islam, Alfred T. Chidembo, Seyed Hamed Aboutalebi, Dean Cardillo, Hua-Kun Liu, Konstantin K. Konstantinov, S X. Dou

Australian Institute for Innovative Materials - Papers

Binder-free self-assembled 3D architecture electrodes have been fabricated by a novel convenient method. Liquid crystalline graphene oxide was used as precursor to interact with poly(3,4-ethylene-dioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) in dispersion in order to form a conductive polymer entrapped, self-assembled layer-by-layer structure. This advanced network containing PEDOT:PSS enabled us to ascribe the superior electrochemical properties of particular graphene sheets. This layer-by-layer self-assembled 3D architecture of best performing composite (reduced graphene oxide-PEDOT:PSS 25) showed excellent electrochemical performance of 434 F g⁻¹ through chemical treatment. To highlight these advances, we further explored the practicality of the as-prepared electrode by varying the composite material content. …

Integrating A Triplet-Triplet Annihilation Up-Conversion System To Enhance Dye-Sensitized Solar Cell Response To Sub-Bandgap Light, Andrew Nattestad, Yuen Yap Cheng, R Macqueen, Gordon G. Wallace, Timothy Schmidt

Australian Institute for Innovative Materials - Papers

The poor response of dye-sensitized solar cells (DSCs) to red and infrared light is a significant impediment to the realization of higher photocurrents and hence higher efficiencies. Photon up-conversion by way of triplet-triplet annihilation (TTA-UC) is an attractive technique for using these otherwise wasted low energy photons to produce photocurrent, while not interfering with the photoanodic performance in a deleterious manner. Further to this, TTA-UC has a number of features, distinct from other reported photon up-conversion technologies, which renders it particularly suitable for coupling with DSC technology. In this work, a proven high performance TTA-UC system, comprising a palladium porphyrin …

Conductivity And Oxygen Reduction Activity Changes In Lanthanum Strontium Manganite Upon Low-Level Chromium Substitution, George Tsekouras, Artur Braun

Australian Institute for Innovative Materials - Papers

On the timescale of solid oxide fuel cell (SOFC) system lifetime requirements, the thermodynamically predicted low-level substitution of chromium on the B-site of (La,Sr)MnO₃ could be a source of cathode degradation underlying more overt and well-known chromium poisoning mechanisms. To study this phenomenon in isolation, electronic conductivity (σ) and electrochemical oxygen reduction activity of the (La_0.8Sr_0.2)_0.98Cr_xMn_1−xO₃ model series (x = 0, 0.02, 0.05 or 0.1) were measured in air between 850 and 650 °C. Depending on the extent of chromium substitution and the measurement temperature, electrochemical …

The Synergistic Effect Between Wo3 And G-C3n4 Towards Efficient Visible-Light-Driven Photocatalytic Performance, Imran Aslam, Chuanbao Cao, M Tanveer, Waheed S. Khan, Muhammad Nawaz Tahir, Muhammad Abid, Faryal Idrees, Faheem K. Butt, Zulfiqar Ali, Nasir Mahmood

Australian Institute for Innovative Materials - Papers

We have developed a facile, scaled up, efficient and morphology-based novel WO3-g-C3N4 photocatalyst with different mass ratios of WO3 and g-C3N4. It was used for the photodegradation of rhodamine B (RhB) under visible light irradiation and it showed excellent enhanced photocatalytic efficiency as compared to pure g-C3N4 and WO3. The apparent performance of the composite/hybrid was 3.65 times greater than pure WO3 and 3.72 times greater than pure g-C3N4 respectively, and it was also found to be much higher than the previously reported ones. Furthermore, the optical properties of composite samples were evaluated. The bandgap of composite samples lies in …