Physical Sciences and Mathematics Commons^™

Use Of Electrochemical Techniques And Statistical Analysis To Investigate The Pitting Probability Of Copper, Sina Matin

Electronic Thesis and Dissertation Repository

The development of a safe permanent disposal plan is essential for the long-term disposal of used fuel bundles. Nuclear Waste Management Organization (NWMO) has been investigating the deep geologic disposal of nuclear waste which offers the optimum passive safety system with a negligible probability of release of radionuclides into the environment.

The proposed used fuel containers (UFC) for the permanent disposal of high-level nuclear waste in Canada is comprised of a carbon steel vessel coated with a 3 mm corrosion-resistant copper layer deposited using a combination of electrodeposition and cold spray deposition. Although copper is often considered to be thermodynamically …

Characterization Of Deposited Copper Oxide Films On Copper Substrates, Millicent Castillo

Electronic Thesis and Dissertation Repository

The deposition of copper oxide films on copper substrates was investigated by the electrochemical, thermal, and hydrothermal oxidation of copper. The formed oxides were characterized using various surface analytical techniques to determine the film’s morphology, composition, and thickness. The results show that by growing oxides electrochemically, a duplex layer composing of CuO and Cu₂O film was formed on the copper surface, having characteristics of being porous and possessing needle-like structures. An oxide film composed of CuO and Cu₂O, which shows minimal porosity and possess mixtures of crystalline and non-crystalline structures, is formed on the copper surface …

Characterization Of Some Natural Copper Samples From The Keweenaw Peninsula Of Lake Superior Using Electron Microscopy And X-Ray Tomography Techniques, Emilie Mk Landry

Electronic Thesis and Dissertation Repository

Copper corrosion is of interest to Canada’s Nuclear Waste Management Organization as it relates to their multi-barrier system for nuclear waste disposal in deep geologic repositories. Spent fuel canisters coated with a thin copper layer must persist for up to one million years. Natural copper from the Keweenaw Peninsula in Michigan, USA, has persisted for over 1 billion years and is here characterized to understand copper corrosion over geological time. Copper samples representing three rock types were characterized using optical microscopy, scanning electron microscopy techniques (energy dispersive X-ray spectroscopy and electron backscatter diffraction), and micro-computed X-ray tomography (microCT) to establish …

Effects Of Gamma-Radiation On The Evolution Of Copper Corrosion Dynamics In Deep Geological Repository Solution Environments, Lindsay J. Grandy

Electronic Thesis and Dissertation Repository

The Canadian plan for permanent disposal of used nuclear fuel involves a used fuel container (UFC), a carbon steel vessel with a copper coating to provide the corrosion protection. The corrosion conditions for the copper layer of the UFC are expected to involve small, stagnant water volumes, pH values between 6 and 9, and a continuous flux of γ-radiation emitted from the radionuclides trapped in the fuel matrix. While γ-radiation does not affect the copper metal directly, humid air and water will radiolytically decompose into redox-active and acidic species which will be produced at constant concentrations and can alter the …

Copper Corrosion Dynamics Under Deep Geologic Repository Conditions, Masoumeh Naghizadeh

Electronic Thesis and Dissertation Repository

Canada’s plan for the permanent disposal of spent nuclear fuel involves a multiple-barrier system contained within a deep geologic repository (DGR). The key engineered barrier is the used fuel container (UFC), which is a copper-coated carbon steel vessel. The environments to which the copper coating will be exposed in the DGR are very different from those commonly encountered in copper corrosion studies. The copper (Cu) will be in contact with thin stagnant layers of water, and the corrosion system will be exposed to a continuous flux of γ-radiation. In the presence of γ-radiation, water and humid air decompose to redox-active …

Analysis And Differentiation Of Uniform And Localized Corrosion Of Cu, Roshan J. Daljeet

Electronic Thesis and Dissertation Repository

The current plan for disposal of used nuclear fuel in Canada involves sealing the waste in steel containers coated with 3 mm of copper and burying them in a deep geologic repository (DGR). The purpose of the copper coating is to provide corrosion resistance. To achieve long term containment, it is necessary that the copper layer corrodes slowly and predictably via active dissolution rather than passivating due to film formation. Film formation could allow pitting corrosion to occur in early phase repository conditions when groundwater ions such as Cl– , SO4 2– and HCO3 – play a dominant role in …

Galvanic Corrosion Of Carbon Steel Coupled To Copper In Used Nuclear Fuel Containers, Lindsay J. Braithwaite

Electronic Thesis and Dissertation Repository

Deep geological containment of used nuclear fuel will rely on multiple engineered and natural barriers, two of which are the copper-coated used fuel containers and the compacted bentonite clay buffer boxes in which the containers will rest. This work focused on possible galvanic interactions between the copper coating and the steel substrate of the container, which may occur at a hypothetical through-coating defect. In the presence of various amounts of chloride, bentonite, and oxygen, corrosion of the copper/carbon steel couple was studied using electrochemical tests complemented by surface characterization and 3D X-ray imaging. We investigated the effects of copper-to-steel area …

The Electrochemical And Corrosion Study Of Copper For Nuclear Waste Containers Under Deep Geological Disposal Conditions, Mengnan Guo

Electronic Thesis and Dissertation Repository

The proposed method for the safe disposal of Swedish, Finnish, and Canadian high-level nuclear waste (HLNW) is to isolate it in iron or steel containers with an outer copper (Cu) shell or coating and bury it in a deep geological repository (DGR). Copper has been selected as the corrosion barrier due to its stability in the aqueous anoxic environments anticipated in DGR conditions. The container will initially be exposed to humid aerated conditions which will evolve to cool and anoxic as radiation fields in the fuel decay and heat production ceases. When the DGR is cool and anoxic, sulphide (SH …

The Influence Of Radiolytically Produced Nitric Acid On The Corrosion Resistance Of Copper-Coated Used Nuclear Fuel Containers, Joseph P. Turnbull

Electronic Thesis and Dissertation Repository

In Canada, the proposed disposal method for high level nuclear waste involves sealing the waste in steel containers with a 3 mm outer copper coating and burying it in a deep geologic repository. However, the thickness of the container is significantly reduced making a reassessment of the influence of γ-radiation, emitted by the waste form, on container corrosion a potential licensing requirement. Under humid aerated conditions, the formation of nitric acid is expected, potentially resulting in the formation of droplets or wetted layers on the container surface. Currently available literature on the corrosion of copper in nitric acid does not …

Galvanic Corrosion Of Copper-Coated Carbon Steel For Used Nuclear Fuel Containers, Thalia E. Standish

Electronic Thesis and Dissertation Repository

Carbon steel vessels coated with ∼3 mm of Cu have been proposed for the permanent disposal of used nuclear fuel in a deep geological repository (DGR) in Canada. In the event of an undetected defect in the Cu coating that exposes the steel substrate, galvanically accelerated corrosion of steel is, in principle, possible. To investigate this scenario, the progression of steel corrosion at the base of novel simulated through-coating defects was monitored electrochemically and imaged non-destructively using X-ray micro-computed tomography (micro-CT) as a function of time, O₂ availability (including anoxic conditions), and coating method (cold spray deposition (with and …

Coinage Metal Chalcogenide Clusters With N-Heterocyclic Carbene Ancillary Ligands, Alex Polgar

Electronic Thesis and Dissertation Repository

This thesis describes the synthesis and characterization of homo- and heterometallic group 11 – group 16 clusters with N-heterocyclic carbene (NHC) ligands. The clusters were prepared from reactive group 11 trimethylsilylchalcogenolate reagents (NHC-M-ESiMe3; M = Cu, Au; E = S, Se, Te) by silane deprotection reactions with phosphine- or phosphite-solubilized group 11 acetates (R3P-M-OAc; M = Cu, Ag, Au). Clusters were characterized by combustion analysis and spectroscopic methods in solution and the solid state. The clusters were phosphorescent at low temperatures with emission energies that depend on the metal/chalcogen composition, ancillary NHC ligand, cluster geometry and nuclearity, and local environment. …

Electrochemical And Corrosion Examination Of Copper Under Deep Geologic Conditions For The Application Of Nuclear Waste Containers, Taylor L. Martino

Electronic Thesis and Dissertation Repository

Copper is the selected material for the fabrication of nuclear fuel waste containers in Sweden, Finland and Canada due to its corrosion resistance in the anoxic aqueous environments, anticipated in deep geological repositories. A potential oxidant for copper is bisulphide produced either by the dissolution of minerals or by sulphate-reducing bacteria. The primary goals of this thesis were to determine the mechanism of corrosion of copper in bisulphide environments and to investigate the chemistry of the bentonite porewater that will ultimately be in contact with the copper container.

The mechanism of sulphide film growth and the details of copper corrosion …

An Evaluation Of The Lithologies And Geochemistry Of The Upper Beaver Deposit Of The Kirkland Lake Area, Katherine E. Feick

Electronic Thesis and Dissertation Repository

The Upper Beaver Cu-Au deposit contains a unique style of mineralization in the Larder Lake and Kirkland Lake areas in terms of mineralization, alteration style, and age. This study aims to use company-provided data, supplemented with focused data collection, to evaluate what information can be attained from company-provided geochemical data. The evaluation uses a combination of hand sample, petrographic, geochemical, statistical, and microprobe analytical methods.

Lithogeochemical analyses indicated that the altered igneous host rock is calc-alkaline in composition and is most likely part of the diorite-monzonite suite. Further, exploratory data analysis of Au and Cu mineralization identified that there are …

Doped Tio2 Nanowires For Applications In Dye Sensitized Solar Cells And Sacrifical Hydrogen Production, Qasem Alsharari

Electronic Thesis and Dissertation Repository

This thesis explores the synthesis of metal oxide 1-D nanowires using a sol-gel method in supercritical carbon dioxide (sc-CO₂), as an environmental friendly enabling solvent. Porous nanowires were synthesized and their performance was tested in dye sensitized solar cell and sacrifical hydrogen production. Titanium isopropoxide (TIP) was used as a precursor for titania synthesis while copper, bismuth and indium were examined as dopants, respectively. The sol-gel reactions were catalyzed by acetic acid in CO₂ at a temperature of 60 °C and pressure of 5000 psi. It was observed that acetic acid/monomer ratio > 4 produced nanowires while a …

Coinage Metal Silylphosphido Complexes Stabilized By N-Heterocyclic Carbene Ligands, Bahareh Khalili Najafabadi

Electronic Thesis and Dissertation Repository

N-Heterocyclic carbenes (NHCs) are strong σ-donating ligands and thus, promising candidates for decorating and stabilizing metal-phosphide nanoclusters. While much research has been focused on the coordination of NHC ligands to different coinage metal centers in order to synthesize mononuclear organometallic complexes, their application in nanocluster chemistry has been relatively unexplored. The work described in this thesis involves employment of NHC ligands for stabilizing coinage metal t-butylthiolate and silylphosphido complexes. These complexes are promising molecular precursors for formation of larger NHC-stabilized nanoclusters.

In particular, the ligation of NHCs to [CuS^tBu] and [AgS^tBu] was developed as an …