Dentistry Commons^™

Enhanced Human Periodontal Ligament Stem Cell Viability And Osteogenic Differentiation On Two Implant Materials: An Experimental In Vitro Study, Engy Adel Ahmed Farag, Sara Fikry Dr, Shereen N. Raafat

Dentistry

Background: Surface roughness of dental implants impacts the survival of adult periodontal stem cells and rate of differentiation. This research was conducted to test how human periodontal ligament stem cells behaved on yttria stabilized tetragonal zirconia polycrystals and polyetheretherketone (PEEK) discs with different surface topographies.

Methods: Discs roughening was prepared by sandblasting. Stem cells were cultivated on zirconia discs with a polished surface, polyetheretherketone (PEEK) discs with a polished surface, sandblasted zirconia discs and sandblasted polyetheretherketone (PEEK) discs. Cells viability was assessed after 24, 48, 72 hours. Scanning electron microscopy was used to examine the adherence and attachment of cells. …

Effect Of Different Polishing Systems On Surface Roughness And Color Stability Of Lithium Disilicate Ceramics, Mahmoud Al Ankily, Fatma Makkeyah

Dentistry

Objective: This study aimed to investigate the effect of two polishing systems on the surface roughness and color stability of lithium disilicate ceramic. Materials and Methods: Forty disc-shaped lithium disilicate samples were constructed and cemented into a cavity prepared onto the labial surface of freshly extracted bovine teeth; The samples were divided into four groups (10 samples per group); C: Control, SS: Scaling only, SE: Scaling followed by polishing using Eve Diapro lithium disilicate polishers, SD: Scaling followed by polishing using Diatech ShapeGuard ceramic polishing plus kit. The surface roughness was measured before scaling, after scaling and finally after the …

An In Vitro Evaluation Of Surface Roughness, Color Stability And Bacterial Accumulation Of Lithium Disilicate Ceramic After Prophylactic Periodontal Treatment, Fatma Makkeyah, Tarek Salah Morsi, Marwa Mohamed Wahsh, Amr Saleh El-Etreby

Dentistry

Objective: To evaluate the effect of scaling procedures using different ultrasonic tips on the surface roughness, color stability and bacterial accumulation of lithium disilicate ceramic. Material and Methods: Scaling procedure was carried out using ultrasonic scaler (Satalec, Acteon, North America) with stainless-steel tip (US), titanium tip (UT) and plastic tip (UP), on disc shaped lithium disilicate samples cemented into a cavity prepared onto the labial surface of freshly extracted bovine teeth (10 samples per group). The samples were stored in coffee solution in an incubator at 37°C for 12 days, which is equivalent to 1 year of coffee consumption. The …

The Effect Of Different Drilling Protocols On Bone Healing Around Dental Implants., Sara Fikry, Amr Amin Ghanim, Hisham El Sheikh, Omar El Sergany

Dentistry

Materials and Methods: 20 patients with kennedy class III modification 1 edentulous areas were recruited for this study and divided into two groups; Control group received implants with conventional osteotomy preparation following standard drilling protocol (speed= 1200 rpm) with torque of 30N and sufficient saline irrigation, while Study group received implants with osteotomy preparation following a low speed drilling protocol (speed < 200 rpm) without irrigation and a torque of 50 N. Cone Beam CT was used to evaluate bone height and density around the implants at 3, 6 and 12 months after insertion. Implant primary stability was evaluated using Ostell by Resonance Frequency Analysis. Results The results showed no significant difference between bone height changes and densities in the control and study groups. Implants primary stability also showed no significant difference in ISQ values between both groups. Conclusion Biologic drilling is a promising implant drilling protocol with a potential to insert implants showing successful osseointegration and acceptable bone changes.

Cad/Cam Milling Versus Rapid Prototyping Surgical Guide Techniques In Dental Implant Placement, Fardos N. Rizk Prof., Marwa Sabet Prof., Hebatallah Mohammed, Adham Elghamry

Dentistry

No abstract provided.

Radiographic Bone Changes Surrounding Implants Of Different Attachment Systems., Sara Fikry El Shafei Dr, Fardos N Rizk Prof

Dentistry

This study was conducted to compare the effect of GPS attachment, OT Equator attachment and Ball and Socket attachment on crestal bone around implants in implant retained mandibular overdenture cases. Materials and Methods: Following two stage surgical protocol eighteen completely edentulous patients received two implants placed bilaterally in the canine region (36 implants) to retain mandibular overdentures. Inclusion Criteria: Patients were all healthy men, non-smokers, Following Misch rules of bone classification patients with bone density ranging from 850-1250 HU (D2) and bone height and width more than 10 mm and 5 mm respectively. Four months following the surgery patients were …

Comparative Study Of Two Fifferent Telescopic Crown Materials Retaining Lower Partial Overdenture, Fardos N. Rizk Prof., Ayman Hany Amin Dr., Gehan Fikry Prof., Amr Ismail Dr.

Dentistry

Background and Objective: This study was conducted to measure the difference between Chrome Cobalt telescopic crowns and Poly ether ether ketone (PEEK) telescopic crowns retaining implant retained partial overdenture.

Materials and Methods: This is a comparitive study that included fourteen lower kennedy class I partially edendulous patients. All patients received posterior implant in the second molar area in each side. The patients were divided into 2 groups, the first group received chrome cobalt telescopic crown and the second group received poly ether ketone telescopic crowns over the implants. Partial overdenture was constructed for all the patients in the two groups. …

The Effect Of Framework Material On Partial Overdenture Supporting Structure, Sara Fikry El Shafei

Dentistry

Purpose: In this study the effect of two partial denture framework materials on the bone tissues surrounding a the implants, in an implant retained partial overdenture is compared. Materials and Mehods: 12 partially edentulous patients with mandibular kennedy class I configuration were selected for this study. They were divided into two groups; Group 1 received a mandibular implant retained partial overdentures with a framework made of cobalt chromium. Group 2 received implant retained partial overdentures with a framework made of acetal resin. The results were evaluated using cone beam ct. Results: The results showed that bone changes produced in metallic …

Deviation Between Planned And Actual Implant Positions Inserted Using Mucosa-Supported Stereolithographic Surgical Guide In Edentulous Mandible And Maxilla, Fardos N. Rizk, Marwa Sabet Prof., Omar Yehia

Dentistry

Purpose: estimate the deviation between the planned and the actual implant inserted using a mucosa-supported stereolithographic surgical guide in different edentulous arches and determine the effect of the arch (mandible or maxilla) on accuracy. Materials and Methods: 16 implants were placed in completely edentulous arches and divided into two groups. Group (A): Eight implants were placed in four patients in the mandible using completely limiting mucosa-supported stereolithographic (SLA) surgical guide during implant insertion. Two implants were placed in each patient intraforamina. Group (B): Eight implants were placed in Two patients in the maxilla using completely limiting mucosa-supported stereolithographic (SLA) surgical …

Osseointegrated Implants Versus Zirconium Mucosal Inserts In Complete Denture Patients, Sara Fikry El Shafei Dr, Fardos N Rizk

Dentistry

Purpose: To evaluate the effect of osseointegrated implants versus mucosal inserts used for retention of complete dentures. Materials and Methods: Twelve completely edentulous patients were selected for this study and divided into two groups of six. Group I received implant retained maxillary overdentures, while group II received maxillary overdentures retained by muchor zirconium mucosal inserts. Bone changes in both groups were evaluated using cone beam ct at insertion and after six and twelve months. Results: The results showed that the bone changes produced in mucosal overdenture wearers were greater than those produced in implant overdenture wearers. Conclusion: Zirconium mucosal inserts …

Short Length Versus Conventional Implants In Rehabilitation Of Completely Edentulous Mandible, Fardos N. Rizk, Engy Tallat, Mahmoud Elhomossany, Ahmed Lasheen Dr., Hebatalla Mahmoud

Dentistry

Various bone augmentation strategies have been proposed to overcome the anatomic and physiologic limitations of implant placement in patients with atrophic edentulous ridges. The use of short implants may provide an alternative treatment to avoid complications associated with alveolar bone augmentation. However, the clinical effectiveness of short implants versus long implants was not thoroughly investigated. Marginal bone height changes around short and conventional implants were evaluated in this study Methods: Fourteen completely edentulous male patients were selected and divided into two equal groups. Group (I) Patients received conventional complete maxillary dentures opposed by mandibular overdentures supported and retained by two …

Effect Of One Piece Versus Two Piece Mini Implants On Bone Height Of Implant Retained Mandibular Overdenture, Fardos N. Rizk, Jehan Fikry Prof., Amr Badr, Ahmed Damarisy Dr.

Dentistry

Introduction: Severely atrophied mandibles are a common problem within elderly completely edentulous patients. Given their small diameters, long height and self-tapping characteristics, miniimplant retained over-dentures are a valuable treatment option in such patients. Mini-implants are usually once-piece implants, however recently two-piece mini-implants were introduced with aim of addressing the angulation problems. The success of the latter has not been thoroughly studied. Crestal bone height measurements are normally used to evaluate implant success. Therefore this study was conducted to evaluate the effect of one piece versus two piece ERA mini implants on crestal bone height of implant retained mandibular over-denture. Materials …

Mucosa-Supported Stereolithographic Surgical Guide Versus Conventional Surgical Stent In Implant Supported Overdenture, Fardos N. Rizk, Marwa Sabet Prof., Shaimaa Azoz, Eman Gamal

Dentistry

Purpose: The aim of the study was to compare between the accuracy of mucosa-supported stereolithographic surgical guide versus conventional surgical stent in implant supported overdenture. Materials and methods: Twelve patients with completely edentulous patients were selected for this study and divided into three groups. Group (A): 8 implants were placed in the mandible using conventional surgical stents during implant insertion. Group (B): 8 implants were placed in the mandible using partially limiting mucosa-supported stereolithographic (SLA) surgical guide during implant insertion. Group (C): 8 implants were placed in the mandible using completely limiting mucosa-supported stereolithographic (SLA) surgical guide during implant insertion. …

Study Retention And Physical Properties Of Conventional And Microwave-Cured Acrylic Resin Complete Denture: An In-Vivo And In-Vitro Investigation, Fardos N. Rizk, Amany Elhadary

Dentistry

Aim: This study was two folded: an in-vivo study to compare the retentive properties of Lucitone conventional cured denture base resin and Nature-Cryl MC microwave cured denture base resin and an in-vitro study to compare the internal adaptation, fracture resistance, roughness, hardness and colour stability of these two materials and correlate the laboratory results with each other and with the clinical results. Materials and Methods: Twenty completely edentulous male patients received twenty complete dentures constructed from Lucitone conventional cured denture base resin. The retentive properties of the upper complete dentures were measured using force measurement gauge at one week, one …

Effect Of Two Different Maxillary Treatment Options On Supporting Structures Of Mini Implant Retained Mandibular Overdenture, Fardos N. Rizk

Dentistry

Objectives: This study was conducted to evaluate whether maxillary conventional complete denture or narrow diameter implant retained maxillary overdenture is more compatible on opposing crestal bone height surrounding mini implants retaining mandibular overdenture. Materials and Methods: Fourteen male completely edentulous patients received mandibular overdentures retained by four one piece mini implants with ERA attachments placed anterior to the mental foramen. Patients were randomly divided into two groups: Group I received opposing maxillary conventional complete denture and Group II received opposing maxillary overdenture retained by four one piece narrow diameter implants with ball attachments placed in the anterior maxilla. Once patients …

Comparative Study Of Retention Of Palate-Less Versus Complete Palatal Coverage Dentures Fitted With Zirconia Mucosal Inserts, Fardos N. Rizk

Dentistry

Objective: The purpose of this study is to compare the retention of palate-less versus complete palatal coverage dentures fitted with zirconia mucosal inserts. Materials and Methods: Fourteen male patients received upper complete dentures fitted with zirconia mucosal inserts. Half of the dentures were fabricated with complete palatal coverage (Group I) and the other half was palate-less (Group II).Retention was measured for all patients using force measurement gauge through six months follow-up period. Results: Both groups showed increase in denture retention through the follow-up period however, dentures with complete palatal coverage (Group 1) showed higher mean values of retention compared to …

Comparative Study Of Implant Stability And Bone Height Changes Among Different Implant Designs Retaining Partial Overdenture, Fardos N. Rizk

Dentistry

Objective: This study was conducted to assess the primary stability of Trabecular Metal Dental Implant and Tapered Screw Vent Implant to determine the appropriate time for their loading by lower partial overdenture and to follow up for one year the changes in implant stability and crestal bone height surrounding the implant after loading it. Materials and Methods: The study was performed on ten lower Kennedy class I partially edentulous male patients. Each patient received one implant at the second molar area in each side of the ridge, where Trabecular Metal Dental Implant was inserted in the left side of the …

Radiographic Evaluation Of Accuracy Of Surgical Stent For Implant Placement In Knife Edge Posterior Mandibular Ridge In Cases Of Ridge Splitting, Fardos N. Rizk, Engy Abdelhamed

Dentistry

Aim: This study was conducted to evaluate the efficacy of using conventional surgical stents guided by cone beam computed tomography in determining the position and buccolingual inclination of implants placed in posterior mandibular knife edge ridge in cases of ridge splitting with and without bone grafting material. Materials and Methods: The study was conducted on sixteen implants placed bilaterally in posterior knife edge mandibular ridge of four patients, where each patient received four implants in the form of two in each side. Implants on the right side of the ridge were placed following ridge splitting and bone grafting (group A). …

Effect Of Two Different Attachments On The Supporting Structures And Masticatory Capacity Of Implant Retained Mandibular Overdenture, Fardos N. Rizk

Dentistry

Aim: This study was conducted to compare the effect of ball and socket attachment and GPS attachment in implant retained mandibular overdenture cases regarding changes in: crestal bone height and density surrounding implants, electromyographic activity of temporalis and masseter muscles and occlusal biting force. Materials and Methods: Following two stage surgical protocol twelve completely edentulous patients received two implants placed bilaterally in the canine region (24 implants) to retain mandibular overdenture. Four months following the surgery patients were randomly divided into two equal groups; Group-I received ball and socket attachment while Group-II received GPS attachment upon which mandibular overdentures were …

Comparative Evaluation Of Two Different Castable Bar Attachments In Implant Retained Mandibular Overdenture Cases, Fardos N. Rizk

Dentistry

Objective: This research was carried to evaluate which solitary attachment; OT Cap Ball attachment or OT Cap Equator Profile attachment mounted on a bar splinting two implants retaining mandibular overdenture is more favorable regarding crestal bone height and bone density changes surrounding the implants using cone beam computed tomography. Materials and Methods: Following two stage surgical protocol twelve completely edentulous patients received two implants placed bilaterally in the canine region (24 implants) to retain mandibular overdenture. Four months following the surgery patients were randomly divided into two equal groups; Group-I received two OT Cap Ball attachments mounted on a bar …

Radiographic Evaluation Of Marginal Bone Levels Around Platform-Switched Implants And Non-Platform-Switched Implants Immediately Loaded To Support Mandibular Overdenture, Fardos N. Rizk, Eatmad Elrekaby

Dentistry

Objective: This clinical study was conducted to assess the marginal bone level around two different types of implant abutment junctions which are the platform-switched connection and non-platform- switched connection used in cases of implants supporting mandibular overdentures following the immediate loading protocol. Materials and Methods: Twelve completely edentulous male patients were randomly divided into two equal groups: Group I: Each patient received two Legacy I Implants designed with internal bevel having 3.5mm implant platform diameter to which 3.5mm neck diameter healing collars were threaded creating a matching or non-platform switching mechanism at the implant abutment junction. Group II: Each patient …

Effect Of Two Different Implant Structures On Stresses Induced Within The Surrounding Bone Using Three Dimensional Finite Element Analysis, Fardos N. Rizk

Dentistry

objective: The purpose of this study is to compare the stresses induced within the bone surrounding the Trabecular Metal Dental Implant (Zimmer Dental Inc., Carlsbad, CA, USA) in comparison to the stresses induced within the bone surrounding its predicate Tapered Screw Vent Implant (Zimmer Dental Inc., Carlsbad, CA, USA) using three dimensional finite element analysis. materials and methds: The current finite element analysis simulated a clinical situation where an edentulous mandible was restored with an entirely implant supported cantilever bar overdenture retained by five implants placed parallel to each other in the interforaminal region opposed by a complete denture. Two …

Comparative Study Of Ot Equator Profile Attachment Versus Gps Attachment In Implant Retained Mandibular Overdenture Cases, Fardos N. Rizk

Dentistry

Aim: This study was carried out to evaluate whether OT Equator Profi le attachment or GPS attachment is less destructive to crestal bone around implants and to bone in distal aspect of the ridge in implant retained mandibular overdenture cases. Materials and Methods: Following two stage surgical protocol twelve completely edentulous patients received two implants placed bilaterally in the canine region (24 implants) to retain mandibular overdentures. Four months following the surgery patients were randomly divided into two equal groups; Group-I received OT Equator Profi le attachment while Group-II received GPS attachment upon which mandibular overdentures were retained. Once patients …

Radiodensitometric Evaluation Of The Effect Of Low Energy Laser Irradiation With And Without Anioxidant Therapy On Immediately Loaded Implant Supported Overdenture, Fardos N. Rizk, Mouchira Salah Eldin Prof.

Dentistry

objective: The purpose of this study is to compare the bone height and density around immediately loaded implants placed in the canine area supporting a mandibular overdenture in four different groups. The first group received low level laser therapy and antioxidants. The second group received antioxidants only. The third group received low level laser therapy only. The fourth group (control group) received no therapy. materials and methods: Following one stage surgical protocol twenty four implants were inserted bilaterally in the canine region to support mandibular overdentures for twelve completely edentulous patients in the form of two implants per patient. Patients …

Hyperbaric Oxygen Therapy For Promoting Osseointegration Around Dental Implants In Heavy Smokers, Fardos N. Rizk, Nasser Shaheen

Dentistry

Objective: The purpose of this study is to evaluate the effect of hyperbaric oxygen (HBO) therapy on osseointegration of implants supporting mandibular overdenture in heavy smokers. Materials and Methods: Following two stage surgical protocol twelve completely edentulous male heavy smokers received implants placed bilaterally in the canine region to support mandibular overdenture. On the second day after the surgery patients were divided randomly into two equal groups. Patients of group I were placed on a protocol of five consecutive sessions of HBO therapy, while patients of group II received no therapy and served as control. Four months following the surgery …

The Effect Of Two Different Implant Systems On Bony Changes In Mandibular Implant Supported Overdenture, Fardos N. Rizk, Eatmad Elrekaby, Azza Farahat

Dentistry

objective: This study was conducted to evaluate the bone changes that may occur around Legacy I implants and NanoTite Tapered implants supporting mandibular overdentures utilizing cone beam computed tomography (CBCT). materials and methods: Fourteen completely edentulous male patients were randomly divided into two equal groups. Group I: Each patient received two Legacy I implants. Group II: Each patient received two NanoTite Tapered Implants. All implants were inserted bilaterally in the mandibular canine region. For all patients conventional complete dentures were constructed before implants placement. After complete osseointegration of implants, dome shaped healing collars were screwed to the implants upon which …

Tomographic Assessment Of Different Attachment Sizes In Implant Supported Overdenture, Fardos N. Rizk, Marwa Sabet, Wael Amer

Dentistry

objective: This research was carried to evaluate which ball size mounted on bar splinting two implants supporting overdenture is more favorable regarding bone height and density. material &methods: Two implants(Tut Dental Implant System,ECDI Cairo, Egypt) splinted by bar (OT bar Multiuse attachments,Cas,RHEIN 83, ITALY) carrying two balls (OT Cap attachments, Cas, RHEIN 83 Italy) were inserted in n=10/gp. Patients were divided into two groups according to the size of the balls used which were either micro1.8mm or macro 2.5mm (control group). For all patients overdentures were constructed & conventional tomograms were taken. Crestal bone height & density around the implants …

Different Treatment Modalities In Free End Saddle Cases, Fardos N. Rizk

Dentistry

No abstract provided.

A Comparative Evaluation Of Locator Versus Ball And Socket Attachment In Implant Retained Mandibular Overdenture Cases Using Cbct, Fardos N. Rizk, Marwa Sabet Prof., Amany Elhadary, Wael Amer

Dentistry

No abstract provided.

Effect Of Different Border Molding Materials On Complete Denture Retention, Fardos N. Rizk

Dentistry

No abstract provided.