Dentistry Commons^™

The Effect Of Several Electric Cigarette Puffs On Nanohybrid Composite Resin Surface Roughness, Alvi Rizqi Amaliyah, Haris Budi Widodo, Irfan Dwiandhono

Journal of Dentistry Indonesia

Nanohybrid composite resin is a dental restorative material comprising micro and nano-sized fillers. When accompanied by smoking habits, it can alter the surface roughness of composite resin. Objective: This study aimed to determine the effect of several electric cigarette (e-cigarette) puffs on the surface roughness of nanohybrid composite resin. Methods: This study was conducted in the experimental laboratory with a pretest-posttest control group design using 48 nanohybrid composite resin specimens divided into six groups. Subsequently, the experimental groups were exposed to 75, 150, 225, 300, and 450 puffs of e-cigarette, and the control group was given artificial saliva …

Surface Roughness Of Restorative Materials After Simulated Toothbrushing With Toothpastes Containing Theobromine And Arginine: An In Vitro Study, Fikri Öcal, Burak Dayi, Zeynep Küçükakçalı

Journal of Dentistry Indonesia

Objective: This study examined the effect of toothpastes containing theobromine and arginine on the roughness changes of microhybrid composite, nanohybrid composite, and giomer restorative materials. Methods: A total of 90 disc-shaped specimens were prepared using microhybrid composite (Arabesk-Ara), nanohybrid composite (Herculite-Her), and giomer (Beautifil II-Gio). The samples were divided into 3 subgroups (n = 10), and initial surface roughness was evaluated with a mechanical profilometer and scanning electron microscopy (SEM). All samples were then subjected to a 1-year brushing simulation via a toothbrushing simulator using toothpastes containing theobromine (Theodent Classic, Theodent) or arginine (Colgate PRO-Relief, Colgate Palmolive); a …

Comparison Of Edta And Boric Acid Irrigation In Terms Of Root Canal Dentin Microhardness And Sealer Penetration Depth, Selen İnce Yusufoğlu, Esma Saricam, Neslihan Bulak, Mustafa Güngörmüs, Fatih Tulumbacı, Suat Özcan

Journal of Dentistry Indonesia

Chemo mechanical preparation is one of the important stages for successful endodontic treatment, and Boric acid has been proposed as an alternative irrigation solution for root canal treatment. Objective: The purpose of this study was to evaluate the effect of irrigation with boric acid (BA) and EDTA on the mineral content and microhardness of dentin and penetration of the AH Plus root canal sealer. Methods: 63 single-rooted teeth were instrumented. Microhardness analysis, 45 teeth were cut longitudinally and then transversely to obtain dentin. Pre- and post-treatment microhardness values were measured. The samples were randomly assigned into 3 groups …

Effect Of Triple Antibiotic Paste, Double Antibiotic Paste, And Calcium Hydroxide On Antibiotic Resistance Of Tet Repressor Proteins, Tetracycline Resistance Gene W, And Tetracycline Resistance Gene Q: A Randomized Controlled Clinical Trial, Ertuğrul Karataş, Özgen Kırmızıbekmez, Mustafa Özkan Baltacı, Ahmet Adıgüzel

Journal of Dentistry Indonesia

Objective: To investigate the effect of the use of Calcium Hydroxide (Ca(OH)2), Triple Antibiotic Paste (TAP), and Double Antibiotic Paste (DAP) as intra-canal medicaments on the development of antibiotic resistance by evaluating tetracycline genes. Methods: Forty five patients were randomly assigned into 3 groups according to the intracanal medication using a web program (www.randomizer.org), (Ca(OH)2, TAP and DAP). Root canal bacteriological samples were collected before root canal treatment (S1) and after chemo-mechanical procedures (S2). Following root canal shaping procedures, intra-canal medication of the root canals was performed with selected intra-canal medicament. A second appointment was planned for the …

Elastic Recovery Properties Of Alginate Impression Materials Based On Red Algae Kappaphycus Alvarezii, Didin Erma Indahyani, Izzata Barid, Nafisah Nafisah, Depi Praharani, Agus Sumono, Niken Probosari, Sulistiyani Sulistiyani

Journal of Dentistry Indonesia

Alginate impression materials in dentistry are used to form details of the oral cavity organs. The alginate content in the impression material functions to form a gel. One source of alginate is algae. Objective: This study aims to determine the recovery elasticity and setting time of alginate impression materials made from red algae K. alvarezii. Methods: The sodium alginate in the composition of this alginate impression material was extracted from red algae K. alvarezii. The alginate impression material was tested for setting time and recovery elasticity and compared with commercial impression material (Hygedent®). Results: The elastic …

Management Of Ankyloglossia In A Non-Syndromic Patient Using A Super Pulsed Laser: A Life-Changing Treatment- A Case Report, Urfi Jawed, Afaf Zia, Ramniwas Kumawat, Afshan Bey, Maahin Mahmood

Journal of Dentistry Indonesia

Objective: Ankyloglossia affects a person’s overall well-being and life, from malnutrition due to poor feeding and mechanical problems to psychological stress and low self-esteem, thus affecting social life. This case reports the use of non-scalpel techniques, such as a super pulsed laser, to manage ankyloglossia in a non-syndromic patient suffering from speech incompetence and restricted tongue mobility and highlights its advantages over other conventional techniques. Case Report: A 17-year-old male patient presented with a complaint of restricted tongue mobility, due to which he could not pronounce certain words clearly. As the patient was apprehensive about the use of …

Comparison And Assessment Of Design, Handling Characteristics, And Efficacy Of Hand Instruments In Calculus Removal, Mohan Kumar Pasupuleti, Krishna Ganesh, Gautami S Penmetsa, Boddeda Anusha, Haripriya Narukurthi, Kommina Mouna Sahith

Journal of Dentistry Indonesia

Objective: primary objective of periodontal therapy is to remove supra and subgingival deposits from the tooth surface to stop disease progression. The purpose of the study is to address the instrument selection and its efficacy in calculus removal. Methods: A total of 50 subjects who fulfilled the criteria were included in the study. Participants were subjected to a complete periodontal examination, and the responses from 50 dental house surgeons were compared based on the instrument design, handling characteristics, and efficacy of calculus removal by using two sets of instruments. Results: The LM instrument was rated as best …

Clinically Effective Regenerative Therapy For Primary Endodontic Lesions With Secondary Periodontal Lesions: A Case Report, Martina Amalia, Budi Budi, Iceu Estu Kurmaena, Nevi Yanti, Hesty Nurcahyanti, Aini Hariyani Nasution

Journal of Dentistry Indonesia

The diagnosis and prognosis of teeth with endo-perio lesions present a major challenge for dentists. Proper diagnosis is critical in determining treatment and the long-term prognosis. However, treating complex endodontic and periodontal lesions is one of the most common challenges in current clinical practice. The coexistence of pulpal and periodontal tissue damage may complicate diagnosis and further influence dental prognosis. This article consists of a case report evaluating the efficacy of xenografts and resorbable membrane pericardium in treating bifurcation lesions associated with periodontal lesions of the left mandibular first molar. A 22-year-old female patient was referred by conservative dentistry with …

Contents Vol 30 No 3 2023, Dr. Yuniardini Septorini Septorini Wimardhani

Journal of Dentistry Indonesia

This is the content of Vol. 30 number 3 2023.

Shore A Hardness And Fourier Transform Infrared Spectrophotometer Analysis Of Thymol-Modified Maxillofacial Silicone Material, Manar Hussein Ramadhan, Faiza M. Abdul-Ameer

Maaen Journal for Medical Sciences

The longevity of any prosthesis depends on the materials from which it was fabricated, which is why defects in the material properties may reduce the service life of the prosthesis and necessitate its replacement. This study aims to test the influence of incorporating different weight percentages of thymol micro-powder into the maxillofacial silicone matrix on Shore A hardness of the silicone. Room-temperature vulcanised VST-50 maxillofacial silicone was used to prepare the study specimens. Thymol micro-powder was incorporated into the silicone matrix in two percentages (0.75 wt.% and 1 wt.%). 30 specimens were prepared and then subdivided equally into three groups, …

J Mich Dent Assoc November 2023

The Journal of the Michigan Dental Association

Every month, The Journal of the Michigan Dental Association brings news, information, and features about Michigan dentistry to our state's oral health community and the MDA's 6,200+ members. No publication reaches more Michigan dentists!

In this issue, the reader will find the following original content:

• A cover story on The University of Michigan's Gordon H. Sindecuse Museum of Dentistry.
• News you need, Editorial and regular department articles on MDA Foundation activities, Dentistry and the Law, Staff Matters, and component news.

This issue also includes two articles reprinted with permission.

• A feature from Ontario Dentist on The Challenge of False Belief: …

Corrosion Of Implant Materials In The Human Body, Maedeh Barzmehri

Corrosion Research

This paper extensively examines the complex problem of implant corrosion occurring within the human body. The corrosion of implants gives rise to substantial challenges, encompassing compromised implant durability, patient safety concerns, and potential adverse impacts on the long-term functionality of the medical device. The study's primary objectives include offering a concise overview of the various corrosion mechanisms that impact a range of implant materials and outlining health complications linked to the byproducts of implant corrosion. Furthermore, it delves into a cost analysis specific to hip or knee revision arthroplasty, which has become a prevalent scenario in implant failure cases on …

Fabrication And Characterization Of Nylon 6 Fiber Via Wet Spinning Method For Application As A Reinforcing Material For A Direct Dental Bridge, Dissa Kirana Wijaya, Nina Djustiana, Yanwar Faza, Arief Cahyanto, Andri Hardiansyah

Makara Journal of Science

Nylon is a biocompatible thermoplastic polymer that is well known for its excellent fracture resistance, making it suitable for fabricating fiber-reinforced composite (FRC)-based dental bridges. FRC is widely used in dentistry. This study aimed to investigate the structural and morphological characteristics of the nylon 6 fiber prepared using five different weights of nylon 6 dissolved in formic acid. The nylon 6 fiber was successfully fabricated via a simple wet spinning method using water as a coagulant. The fiber was then characterized using Fourier transform infrared (FTIR) spectroscopy, optical microscopy, and scanning electron microscopy. FTIR spectroscopy confirmed the presence of nylon …

Bond Strength Of Reline Materials To 3d-Printed Provisional Crown Resins, Jorge Palavicini, Sherrod L. Quin, Wael Zakkour, Karim Zakkour, Safa Manafi Varkiani, Xiaoming Xu, Nathaniel C. Lawson, Amir Hossein Nejat

School of Dentistry Faculty Publications

(1) Purpose: The aim of the present study was to compare the bond strength between two 3D-printed resins designed for long-term provisional crowns and three different reline materials. (2) Materials and Methods: Rectangular specimens were prepared from two 3D-printed resins (Envision Tech and NextDent C&B) and a conventional self-cure PMMA. Transparent tubes filled with three different reline materials including composite resin, Bis-acryl, and PMMA were bonded to the 3D-printed specimens (n = 11 per group, total of 6 study groups). Tubes filled with PMMA were bonded to the prepared PMMA specimens which served as the control group (n = 11, …

Oral Leukoplakia: Diagnosis And Management Revisited, Isaäc Van Der Waal

Journal of Dentistry Indonesia

The definition of oral leukoplakia has not much changed during the past five decades and is still a definition by exclusion of ‘known’ lesions. Therefore, a diagnosis of leukoplakia is not always a straightforward one for the clinicians and, to some extent, also for the pathologists. The traditional clinical classification in homogeneous and nonhomogeneous leukoplakia may just be simplified into leukoplakia (thin and thick/verrucous) and erythroleukoplakia. In spite of numerous reported predictive molecular and genetic parameters of malignant transformation, the presence and grade of epithelial dysplasia as assessed by histopathological examination is still the most important one. Of the various …

Comparison Of Centering Ability And Canal Transportation Of Trunatomy Files With Different File Systems, Ecehan Hazar, Gediz Geduk, Ezgi Coşkun, Sibel Koçak, Baran Can Sağlam, Mustafa Murat Koçak

Journal of Dentistry Indonesia

Objective: This study aims to evaluate the centering ability and canal transportation of the ProTaper Next, One Curve, and TruNatomy instruments in curved root canals. Methods: Forty-five curved mesiobuccal canals of human mandibular molar teeth were selected, randomly divided into 3 groups, and prepared using the ProTaper Next, One Curve, and TruNatomy files. Cone Beam Computed Tomography images of the cross-sectional planes at 1 mm, 3 mm, 5 mm, and 7 mm from the apical foramen were determined before and after the preparation. For each specified millimeter canal transportation and centering ability were measured. Statistical analysis was performed …

The Effects Of Boric Acid On The Water Solubility Of Glass Ionomer Cements, Banu Cukurluoz Bayındır, İrem Bağ

Journal of Dentistry Indonesia

Changing the water solubility property of glass ionomer cement (GIC), which is frequently used in pediatric dentistry, is the starting point of this study. Objective: To evaluate the effects of boric acid on the water solubility (WS) of GIC. Methods: The samples were prepared as n=12 in each of four groups: GIC-Conventional glass ionomer cement; BGIC with 1:3 boric acid added to conventional GIC powder; RMGIC-resin-modified glass ionomer cement; BRMGIC with 1:3 boric acid added to RMGIC powder. Weight changes were compared 1, 3 and 24 h after keeping in distilled water. One sample in each group was …

Comparison Of Two Different Intraoral Scanners For Determination Of Caries Related Volume Loss In Caries Removal, Merve Şeker, Elif Alkan, Dilek Tağtekin, Bora Korkut, Funda Yanıkoğlu

Journal of Dentistry Indonesia

Objective: The study aimed to compare cavity volume data obtained with two different intraoral scanners. Methods: One hundred extracted molar teeth were divided into groups according to ICDAS-II classification, and scanned with Cerec Omnicam (Dentsply Sirona) and iTero Element Flex (Align Technology). The caries-infected tissues were removed regarding either minimally invasive or conventional cavity principles. Samples were scanned again and volumetric data were assessed by Meshmixer 3.5 (Autodesk) 3D modeling software. Statistical evaluations were performed with Mann Whitney U test and Spearman’s Correlation test. The significance level was α=0.05. Results: Although there was a significant difference between obtained …

How To Manage Fan’S C Shape Canals Along With S Shape Morphology In Indian Population: A Case Series And Narrative Review, A Lavanya, Rajendra Kumar Tewari

Journal of Dentistry Indonesia

The C-shaped root canals offer greater negotiation, debridement, and obturation difficulty as they present with intercommunications, lateral canals, and reduced dentin thickness.

Objective: This case series elaborates on the recognition that these varying configurations is important to enhance adequate cleaning, shaping, and sealing of the root canal.

Case Reports: On clinical examination, all the teeth showed caries were nonresponsive to sensibility tests and toother diagnostic tests, suggestive of pulp necrosis with apical periodontitis. Conventional root canal treatment with different techniques and obturation systems have been used. This case series presents the successful management of various C-shaped configurations classified by Fan …

Local Chlorhexidine Delivery For Periodontal Infection Therapy: A Short Review, Muhammad Guruh Najmudin, Azizah Intan Pangesty, Rini Riastuti, Sunarso Sunarso, Abdul Halim Abdullah

Journal of Materials Exploration and Findings

Oral diseases affected more than half of the world’s population. Periodontitis is the second biggest threat to oral health after dental caries. Periodontitis is an inflammation inside periodontal pockets caused by pathogenic microbial colonies which lead to destruction of bone tissue and soft tissue. Chlorhexidine gluconate is an antimicrobial agent that effective to destroy pathogenic microbial and cure periodontitis. Chlorhexidine gluconate is given locally using a carrier material to the infected area. There are several materials that can be used to deliver Chlorhexidine gluconate to the infected periodontal tissue such as gel, liquid (mouthwash), and chip. This short review aims …

Computer Guided Versus Conventional Maxillary Sinus Augmentation Using Allogenic Bone Blocks With Simultaneous Implant Placement In Severely Pneumatized Sinuses, Hisham G. Zulhemma Department Of Oral And Maxillofacial Surgery, Future University In Egypt, Egypt. 20172740@Fue.Edu.Eg, Waleed Ragab El-Beialy Professor Of Oral And Maxillofacial Surgery -Cairo University, Egypt. Wbeialy@Yahoo.Com, Ahmed Abd Elsamad Associate Professor Of Oral And Maxillofacial Radiology– Cairo University, Egypt. Abdalsamad_A@Yahoo.Com, Ahmed Abozekry Lecturer Of Oral And Maxillofacial Surgery –Future University In Egypt, Egypt. Ahmed.Kamal@Fue.Edu.Eg

Future Dental Journal

Background: Maxillary sinus lifting is a complex procedure with reported complications in the literature where the presence of sinus septa further complicates the procedure, they including membrane perforation, bleeding. Aim: The aim of this study is to decrease the incidence of membrane perforation which is the most common reported complication, and to determine whether the use of surgical guides could decrease the incidence of membrane perforation. Materials and methods: A total of 12 cases where blindly divided into 2 groups; Group (A) computer guided maxillary sinus lifting and Group (B) conventional sinus lifting, both groups received allogenic bone blocks for …

Acceptability Of Fully Guided Virtual Implant Planning Software Among Dental Undergraduate Students, Shishir Ram Shetty, Colin Murray, Sausan Al Kawas, Sara Jaser, Wael Talaat, Medhini Madi, Vinayak Kamath, Nisha Manila, Raghavendra Shetty, Vidya Ajila

School of Dentistry Faculty Publications

Background: Fully guided implant surgery as a technique is gaining popularity. It has been observed that use of surgical guides improves precision and predictability for dental implant placement. However, like any other newer technology, the acceptance of fully guided dental implant technology among users is based upon its perceived usability. This study aimed at evaluating the perception about using Virtual Implant Planning Software (VIPS) among undergraduate dental students at the university of Sharjah. Methods: Ninety-Six dental surgery students from the University of Sharjah were included in the study. One week after the Virtual Implant Planning Software (Planmeca Romexis version 6.2 …

The Creation Of An Innovative Oral Health Assessment Survey, Purna Patel

Electronic Theses, Projects, and Dissertations

Background Oral health is an important factor to maintain overall health and well-being, such as students’ knowledge, attitude, and practice. Currently, there is a limited amount of research related to oral health awareness in college students.

Objective The purpose of the study was to define the importance of oral health and investigate college students’ understanding related to oral health. Moreover, research shows how students are protecting their oral hygiene.

Results: The outcomes revealed the college student's awareness and understanding of oral health. According to the survey questions, students believe that dental health is a significant aspect of overall health management. …

Distal Cantilever Length Comparison In Esthetic Material For Hybrid Implant Prosthesis: An In Vitro Study., Sana Shams Eddin, Elie Jasser, Mohammad Chams Eddin, Carole Abi Ghosn Yared, Joseph Makzoumi, Paul Boulos

International Arab Journal of Dentistry

Objective: the assessment of distal cantilever length in implant supported infrastructure by comparing the load to fracture in two different framework esthetic materials (Zirconia and Polyetheretherketone (PEEK)) with two different cantilevers loading distances (10mm, 15mm). Material and methods: 20 frameworks were fabricated and divided into 4 groups (n=5): according to the material type Peek, zirconia, and according to the cantilever loading distance (10), or (15) mm and a load-to-fracture test was used until complete fracture of specimens occurs. Results: The effect of material type and cantilever loading distance were statistically significant for the mean load-to-fracture values (P< 0.05). The Zirconia group failed at higher fracture loads (817 N) than the Peek one (651 N). Frameworks with 10 mm cantilever loading distance failed at higher fracture loads than specimens with 15 mm. Conclusion: Peek is a suitable material for all-on-four framework reconstruction in specific situations, and there is a higher success rate when the distal cantilever length is kept at minimal value (10mm).

10-Minute Ebd: Do Posterior Composite Restorations Have Longer-Term Success Than Glass Ionomer?, Eleni E. Langas Dds, Mridula Manoj Dds, Kelsey Carreras-Simons Dds

The Journal of the Michigan Dental Association

This Ten Minute Evidence Based Dentistry Article provides an example of the implementation of the evidence based dentistry search process with trusted search engines, and identification of the best literature through critical appraisal to answer the clinical question on long-term success of posterior resin vs. posterior glass ionomer restorations.

An Update Of Additive Manufacturing (3d Printing) Technology In Dentistry., Rami Saleh Al Fodeh, Ahed Al-Wahadni, Baker Otman, Mahmoud Almasri

International Arab Journal of Dentistry

Background:

The development of procedures known as additive manufacturing, which aim to produce more complex items with a lower overall material consumption compared to processes known as subtractive manufacturing. In addition, in recent years there has been a significant rise in the quantity of dental materials that are produced via the use of these techniques. As a consequence of this, scientific research has been concentrating more and more on such technologies, particularly in order to shed light on the methodology, indicators, and boundaries of the emerging technology.

Methods:

The purpose of this paper is to provide a narrative assessment of …

A Two-Year Retrospective Evaluation Of Cone Beam Computed Tomography Indications In Pediatric, Adolescent And Adult Patients, Zeynep Betül Arslan, Esra Ceren Tuğutlu

Journal of Dentistry Indonesia

Objective: The objective was to evaluate cone-beam computed tomography (CBCT) indications and distribution in pediatric, adolescent and adult patients. Methods: A total of 1013 CBCT images were reviewed in detail from the electronic patient database. The patient’s age, gender, CBCT indications and acquisition sites, referral departments, reason for referral, incidental findings in the imaging field and the presence of artifacts in the CBCT images were all recorded. The European DIMITRA project recommendations were used to categorize CBCT indications in the children and the European Guidelines were used for adults. Results: From a total of 1013 images; 5.3% …

A Prospective-Randomized Study: The Impact Of Four Different Caries Removal Method On Pain And Clinical Evaluations, Merve Aydemir, Serdar Bağlar

Journal of Dentistry Indonesia

Objective: There are many different methods for removing caries. In this study, to evaluate four caries removal methods in terms of patient comfort and to evaluate the clinical success of restorations according to modified-USPHS criteria. Methods: In 31 patients with at least 4 Class II caries in their posterior teeth, 4 teeth were randomly divided into four groups and 4 different methods (conventional method, Carisolv, Papacarie, Er-Cr:YSGG Laser) were used for caries removal. Pain formation during caries removal was determined by FACE Pain Scale questionnaire. The restorations were controlled with Modified-USPHS criteria in 3-6-12 months period. Mann-Whitney U …

Treatment Of Gingival Fenestration Using Mucoperiosteal Flap With Connective Tissue Graft: A Report Of Two Cases, Swati Jaglan, Shikha Tewari

Journal of Dentistry Indonesia

Fenestration term is derived from the Latin word ‘fenestra’ means ‘window’. Gingival fenestration is not found in routine while its actual occurrence is assumed to be higher. Additionally, if these mucogingival defects persist for a longer duration it may lead to adverse outcomes like compromised esthetics, hypersensitivity, plaque and calculus deposition, and susceptibility to dental caries. Present cases of gingival fenestration were successfully treated by using full-thickness flap elevation with connective tissue graft placement. Two cases were presented with the accumulation of plaque and calculus and having gingival fenestration to the respective sites. After phase 1 therapy, full thickness flap …

Management Of Tooth Hypersensitivity Under A Cantilever Fixed Partial Denture Using A Novel Low-Level Laser Therapy Protocol: A Case Report, Mohamed Fattouh, Manal Mohammed Aljuaid, Nada Ali Abdelaleem

Journal of Dentistry Indonesia

Tooth hypersensitivity is a common clinical complaint after dental treatment.

Objective: This study presents a case report of the use of a diode laser for treating tooth hypersensitivity in a patient with a cantilever fixed partial denture abutment.

Case Report: A 23-year-old female patient presented to the Faculty of Dentistry, Umm Al-Qura University in Makkah, with the chief complaint of pain in a deeply carious maxillary right first premolar. The tooth was extracted, and a cantilever fixed partial denture was placed using the second premolar as an abutment. One year later, the patient experienced tooth hypersensitivity under the bridge. Low-level …