Medicine and Health Sciences Commons^™

Use Of Silica Dust And Lunar Simulants For Assessing Lunar Regolith Exposure, Layzamarie Irizarry-Colon

USF Tampa Graduate Theses and Dissertations

The utilization of the lunar regolith holds immense potential for future space exploration, but the potential health risks associated with lunar regolith are a significant concern. This literature review seeks to critically assess the use of silica and lunar simulants standards and permissible exposure limits (PELs) to evaluate the adverse health effects of lunar regolith. The literature review covers an extensive analysis of existing research, health risks, toxicological properties, and physical and chemical composition associated with silica, lunar simulants, and lunar regolith by using three main sources: regulations, scholarly articles, and Kennedy Space Center (KSC) discussion. This comprehensive analysis forms …

Assessment Of Iso Heart Rate Method To Estimate Metabolic Rate, Karl Williams

USF Tampa Graduate Theses and Dissertations

Thermal equilibrium is primarily maintained by the body’s ability to dissipate internal heat generated during muscle contraction. A number of methods have been used to quantify this thermal burden such as charts and observation of workplace activities and behavior, however these have varying levels of validity. ISO 8996 defines a more accurate method of metabolic rate estimation that uses heart rate and maximal work capacity (MWC); however this requires the use of laboratory settings and equipment that are rarely available in the field. Equations such as the ACSM metabolic equation for the total energy expenditure of walking, hereafter referred to …

Evaluation Of Two Methods To Estimate Wet Bulb Globe Temperature From Heat Index, Stephi Pofanl

USF Tampa Graduate Theses and Dissertations

The Wet bulb globe temperature (WBGT) is a common method to evaluate environmental factors that contribute to occupational heat stress. The Heat Index (HI) is readily available as an alternative to exposure methods. They both assess the most important contributors that are air temperature and humidity. WBGT also includes radiant heat and air motion. To account for radiant heat and/or air motion, some investigators have suggested adjustments to HI. The purpose of this study is to explore two methods to estimate the usefulness of WBGT from HI.

WBGT data were collected in a variety of locations that included direct sun …

Relationships Between Leading And Trailing Indicators At Construction Sites In Yanbu Industrial City, Saudi Arabia, Anas H. Halloul

USF Tampa Graduate Theses and Dissertations

Statement of Purpose: This study sought to assess the relationship between leading and lagging indicators in construction safety Management in the Kingdom of Saudi Arabia. In particular, it sought to determine whether construction sites with higher leading indicators predicted fewer incidents/accidents.Rationale for Study: Construction safety management is a critical occupational health concern globally. Scholars have researched approaches to improve safety measures and performance in construction sites. However, there is little discourse assessing the relationship between the leading indicators and the occurrence of incidents and accidents in construction sites. General Methods: A quantitative analysis was used in this study. Data were …

A Study Of Noise Exposures For Amusement Park Employees By Positions And Ride Categories, Danielle M. Dao

USF Tampa Graduate Theses and Dissertations

Millions of workers in the United States encounter daily noise exposures in their workplace, associated with millions of dollars in workers compensation annually. Many industries have been well studied for the presence of hazardous noise, but little exposure data exists for the amusement park industry.Major attractions found at amusement parks fall within one of three categories and in each of those categories, five employee positions are common. This thesis sought to identify if there are differences in potential employee noise exposure among the ride types and if there are differences in noise exposure among the employee positions. The analysis of …

Comparison Of The Effectiveness Of Disinfectant-Impregnated Wipes Versus Detergent Wipes For Surface Decontamination, Jacob Amadin

USF Tampa Graduate Theses and Dissertations

Over time, there is an increased need to adopt more advanced and effective ways of disinfection. The emergence of the coronavirus-2019 (COVID-19) pandemic reminded the world on the importance of disinfection. Disinfection has been a routine in the healthcare setting. However, with the current pandemic problem, it is more prominently and persistently done in the domestic setting and other business settings beyond healthcare. As such, the use of most disinfectants and detergent wipes to achieve a near sanitized environment has become a common practice around the globe. This research presents the efficacy of disinfectant impregnated versus detergents wipes through comparison. …

Does Time-Weighted Averaging For Wbgt And Metabolic Rate Work For Work-Recovery Cycles?, John W. Flach

USF Tampa Graduate Theses and Dissertations

Heat stress affects thousands of works annually by causing heat-related illnesses. Wet bulb globe temperature (WBGT) is a widely accepted metric to assess the environmental contributions to heat stress. WBGT-based occupational exposure limits (OELs) include the ACGIH TLVs and the NIOSH RELs. The OEL threshold is adjusted downward with increasing metabolic rate. Further, there is an OEL for acclimatized and non-acclimatized workers. An often-recommended intervention found within a heat stress management program is work-recovery cycles to manage exposure. To prescribe work-recovery cycles, the common practice is to use time-weighted averaging (TWA) for the WBGT and the metabolic rate. The purpose …

Acclimatization Protocols And Their Outcomes, Ayub M. Odera

USF Tampa Graduate Theses and Dissertations

Heat acclimatization provides the opportunity to better tolerate heat stress. Different methods are used to acclimatize participants as part of heat stress studies in the laboratory. The usual acclimatization protocols are greater than the occupational exposure limit represented by the ACGIH TLV® and NIOSH REL. The purpose of this paper was to examine the acclimatization state prior to and at the end of a one-week acclimatization program using two acclimatization protocols.

Prior heat stress studies at the University of South Florida (USF) used two heat stress conditions for participants’ acclimatization. Participants (n = 43) were evaluated using four different studies …

Face Mask Use To Protect Against Covid-19; Importance Of Substrate, Fit, And User Tendencies, Evelyn Kassel

USF Tampa Graduate Theses and Dissertations

In 2019, a novel respiratory illness appeared in China and spread rapidly though the country. It was determined that the SARS–CoV-2 virus was the cause of the COVID-19 pandemic. By the end of 2020, almost every continent was experiencing the effects of COVID-19. The virus caused health officials difficulty in determining its route of transmission. They worked tirelessly to discover it was spread via respiratory droplets. Panicked buyers wiped out protective equipment like medical masks and respirators, regardless of what was needed. Essential employees and first responders were subject to large scale personal protective equipment (PPE) shortages as health organizations …

Using Observations From The Uaw-Ford Ergonomic Assessment Tool To Predict Distal Upper Extremity Musculoskeletal Disorders, Zachariah T. Brandes-Powell

USF Tampa Graduate Theses and Dissertations

Distal upper extremity (DUE) musculoskeletal disorders (MSDs) affect thousands of workers annually. Job tasks can have a significant amount of MSD risk depending on the presence of certain risk factors The UAW-Ford Ergonomic Surveillance Tool (EST) is a method specifically designed for the UAW and Ford Motor Company to assess MSD risk in its facilities. The purpose of this report is to evaluate which risk factors in the UAW-Ford EST predict the risk of developing DUE MSDs. Data collected by a previous study on four UAW-Ford automotive manufacturing plants were analyzed. Target jobs were selected based on associated First Time …

Isokinetic Sampling Efficiency Differences For Blunt Edge Vs Sharp Edge Sampling Probes, Cory A. Treloar

USF Tampa Graduate Theses and Dissertations

This project aims to determine if sampling efficiency differences are present between a sharp edge probe and a blunt edge probe during isokinetic sampling. To answer this question, isokinetic sampling was performed inside a wind tunnel. Sampling was performed with the sharp edge probe and compared to data previously obtained using the blunt edge probe. Two different particle sizes were used, 0.50 m and 2.00 m, at air velocities of 0.5 m/s, 1.0 m/s and 2.0 m/s in the wind tunnel. Results showed that there is a difference in sampling efficiency between the two probes and a larger difference in …

The Relationship Between Hand And Wrist Musculoskeletal Disorders And Hand Activity And Posture, Warren M. Henry

USF Tampa Graduate Theses and Dissertations

Musculoskeletal disorders are common in many industries such as automotive, manufacturing and line assembly. Risk factors include high frequency or hand repetition, long duration of work activities with short rest periods, unsustainable postures which put strain on the body and muscles, and activities that require significant force to fulfill duties. The current ACGIH TLV for hand activity uses hand activity level (HAL) and normalized peak force (NPF) to assess an individual’s risk of developing an MSD. The purpose of this study is to propose the use of Posture as an alternative to NPF and couple it with HAL to assess …

The Ability Of The U.S. Military’S Wbgt-Based Flag System To Recommend Safe Heat Stress Exposures, David R. Almario

USF Tampa Graduate Theses and Dissertations

The U.S. military currently uses a flag system based on wet-bulb globe temperature (WBGT) and metabolic rate to recommend heat stress exposure limits. This paper addresses the ability of the flag system to recommend safe heat exposures in a non-military population.

Two progressive heat stress studies provided data on 528 observations of safe or unsafe exposures of 4 hours over a range of WBGT conditions and metabolic rates using 29 participants wearing woven cotton clothing. For the two studies, range of WBGT conditions was 25 to 42C, and the range of metabolic rates was 100 to 650 watts. These exposures …

Validation Of A New Concept For Measuring Respirable Dusts, Xiao Liu

USF Tampa Graduate Theses and Dissertations

Sampling of airborne dust in industry is influenced by the potential health effects associated with human exposure. Health effects depend on mass concentration and particle size which influences the site of pulmonary deposition. Occupational diseases tend to be associated with dust deposition in specific regions of the respiratory tract. The ACGIH size selective TLVs are expressed in three forms: Inhalable Particulate Matter, Thoracic Particulate Matter, and Respirable Particulate Matter. In pneuomoconioses, the amount of dust deposited in the lungs can be estimated by sampling the respirable fraction. Dose-response relationships are derived by relating the health experience of workers to the …

Comparison Of Modeled And Measured Pesticide Concentrations In Air, Trenell Davis Boggans

USF Tampa Graduate Theses and Dissertations

Chlorpyrifos (CPF) is a popular organophosphorus insecticide that is heavily used in the agriculture industry as a means of pest control. Chlorpyrifos is known for its toxic effect to inhibit the enzyme acetylcholinesterase (ACHE) in humans and is widely used in areas of California where the site of application is close to occupied areas, such that exposures to residents and bystanders can occur due to secondary drift. Secondary drift refers to the volatilization of a pesticide from the surface to which it was applied (e.g. soil or plant foliage) and subsequent off-site movement in ambient air. Secondary drift is different …

Ability Of The Iso Predicted Heat Strain Method To Predict A Limiting Heat Stress Exposure, Edgar Prieto

USF Tampa Graduate Theses and Dissertations

Heat stress is one of many physical agents to which thousands of workers are under constant exposure. Oftentimes it is necessary to work above the WBGT-based heat stress exposure limits. It is therefore important to consider alternative measures that include an exposure time limit to manage the heat stress. Predicted Heat Strain (PHS) (ISO7933) is one of those alternatives. PHS uses both personal factors like height and weight and job factors of environment, metabolic rate and clothing. The purpose of this project is to determine whether the PHS is an adequate method to predict short term exposure limits.

The project’s …

Particles In Welding Fumes, Rebecca T. Williams

USF Tampa Graduate Theses and Dissertations

The purpose of this study was to investigate whether or not differing base metals and filler wires used during welding processes contributed to differing amounts of ultrafine particles (UFP) and nanoparticles being emitted during the welding procedure. The study was also conducted to determine UFP and nanoparticle exposure in the breathing zones of the welders as well as the breathing zones of pipefitters and fire watchers, who commonly sit 6ft behind the welding arc. In order to determine if UFP and NP exposures differed with base metal and filler wire, all welding processes utilized the same welding machine for metal …

Predicting Hand Surface Area From A Two-Dimensional Hand Tracing, Myles O'Mara

USF Tampa Graduate Theses and Dissertations

Recent occupational health studies have focused on dermal exposure at the hands, but have been unable to accurately express dose without knowing the HSA. There is no standard method to calculate HSA, though some researchers have derived HSA formulas based on dimensions from a Taiwanese population. This research paper describes a shortcut method to estimate the hand surface area (HSA) of a human hand from a two-dimensional hand tracing, and repeated a Taiwanese HSA study in order to explore the viability of its HSA formula in an American university population. A sample of nine adult men and nine adult women, …

Analyzing Indoor And Outdoor Heat Index Measurements In Kitchens, Allison Welch

USF Tampa Graduate Theses and Dissertations

Occupationally induced heat-related illnesses (HRI) can play a huge part in the lives of employees working within outdoor kitchens. According to the National Institute for Occupational Safety and Health [NIOSH] (2016), “exposure to heat can result in injuries, disease, reduced productivity and death”. When working in outdoor environments, it is important to limit exposure time of direct sun or heat as well as to stay properly hydrated. One way to ensure limited occupational heat exposure is by measuring the Heat Index of the worker's environmental conditions.

The purpose of this study is to determine whether there was a difference between …

Ability Of Physiological Strain Index To Discriminate Between Sustainable And Unsustainable Heat Stress, Dwayne Wilson

USF Tampa Graduate Theses and Dissertations

Introduction: Assessment of heat strain is an alternative approach to assessing heat stress exposures. Two common measures of heat strain are body core temperature (T_C) and heart rate (HR). In this study TC was assessed by rectal temperature (T_re). Physiological Strain Index (PSI) was developed to combine both T_re and HR into one metric. Data collected from progressive heat stress trials were used to (1) demonstrate that PSI can distinguish between Sustainable and Unsustainable heat stress; (2) suggest values for PSI that demonstrate a sustainable level of heat stress; and (3) determine if clothing or …

Influence Of Environmental Parameters On Mold Sampling Results, Benjamin Fishman

USF Tampa Graduate Theses and Dissertations

Mold is a type of fungus present in nearly all environments. Mold thrives under several environmental parameters such as high humidity and an adequate food source. A professional, such as an industrial hygienist, can measure mold in indoor and outdoor environments. Industrial hygienists commonly use a cascade impactor with a culture plate to capture air within a sampling area. While collecting air samples, environmental parameters such as temperature, humidity, and carbon dioxide are recorded. A laboratory then cultures and analyzes the samples, identifying the types and amounts of viable mold found in the sampling area.

In this study, a data …

Effects Of Temperature On The Emission Rate Of Formaldehyde From Medium Density Fiberboard In A Controlled Chamber, William Swankie

USF Tampa Graduate Theses and Dissertations

Formaldehyde is a colorless gas that is found naturally in the environment. It is a popular additive in many consumer products including composite wood products. Composite wood products are engineered wood panels produced from pressing pieces, chips, particles, or fibers of wood together at high temperatures held together with a bonding agent. This bonding agent is often formaldehyde-containing resins that are known to release formaldehyde over time. This is concerning because of the carcinogenic classification of formaldehyde, the wide spread application of composite wood products, and the increasing amount of time spent in the indoor environment.

In a controlled 0.53 …

Occupational Noise Exposure Evaluation Of A Group Of Groundskeepers At A University Campus, Monica Elisa Garcia

USF Tampa Graduate Theses and Dissertations

Every year, twenty-two million workers are exposed to potentially damaging noise at work. Last year, U.S. businesses paid more than $1.5 million in penalties for not protecting workers from noise. (OSHA, 2016). In the United States ten million people have some kind of noise related hearing loss (CDC, 2016) and noise damage to the ear may not be detected until it is great enough to cause hearing impairment.

Grounds keeper’s functions consist of a variety of activities that require the use of powered tools such as mowers, riding mowers, leaf blowers, pressure washers, trimmers/edgers and chainsaws. OSHA has stated that …

An Exposure Assessment Of Paper Dust In A Coupon Manufacturing Facility, Danny C. Fink

USF Tampa Graduate Theses and Dissertations

Purpose. Exposures to paper dust, classified as Particulates Not Otherwise Regulated (PNOR), in an industrial setting can cause irritation to the eyes, skin, throat and upper respiratory tract. An exposure assessment was conducted to evaluate the paper dust exposures in the coupon manufacturing facility during a normal production working period. Methods. Total and respirable personal dust sampling was performed according to NIOSH 0500 and 0600 methods. Six total dust samples and seven respirable dust samples were taken within the sampling areas where airborne paper dust was produced to evaluate the Time Weighted Average (TWA) of the exposed employees. Results. Results …

What Percentage Of The Security Forces At Macdill Afb Experience Exposure To Noise In Excess Of The Osha Pel And The Air Force Oeel?, Julian Joseph Krusely

USF Tampa Graduate Theses and Dissertations

Noise-related hearing loss has been listed as one of the most prevalent occupational health concerns in the United States for more than 25 years with approximately 30 million people in the US alone occupationally exposed to hazardous noise according to the Occupational Safety and Health Organization. Many people are aware of some risks the military members take every day being at war, but very few think about the risks of the members on a base located stateside. To this point, not much research has been done on these risks, and even less has been done on the hazardous noise risks …

Assessment Of Prolonged Occupational Exposure To Heat Stress, Ximena Garzon-Villalba Garzon-Villalba

USF Tampa Graduate Theses and Dissertations

Heat stress is a recognized occupational hazard present in many work environments. Its effects increase with increasing environmental heat loads. There is good evidence that exertional heat illness is associated with ambient thermal conditions in outdoor environments. Further, there is reason to believe that risk of acute injury may also increase with the ambient environment. For these reasons, the assessment of heat stress, which can be done through the characterization of the wet bulb globe temperature (WBGT), is designed to limit exposures to those that could be sustained for an 8-h day. The ACGIH Threshold Limit Value (TLV) for heat …

Hexamethylene Diisocyanate Homopolymer And Monomer Exposure Assessment And Characterization At An Automobile Manufacturer In The United States, Karthik Reguram Sivaraman

USF Tampa Graduate Theses and Dissertations

A variety of paint products are used for their aesthetic and anti-corrosive properties. Isocyanates are consistently found in automobile paint products, particularly in clear coat polyurethane products. Clear coat is typically sprayed via pressurized air by means of an auto-spray robot. In clear coat repair situations, manual, air-powered spray guns are used, and manual spray Operators administer the clear coat material. The isocyanates are a primary anti-corrosive agent in polyurethane products. The Occupational Safety and Health Administration (OSHA) has not established a Permissible Exposure Limit (PEL). The National Institute for Occupational Safety and Health (NIOSH) and American Conference of Governmental …

Assessing Excessive Noise Exposure Of Music-Oriented Nightclub Employees, Aiyanna Fitzgerald

USF Tampa Graduate Theses and Dissertations

Much research has gone into noise-induced hearing loss (NIHL) and the effects of high intensity noise levels on the hearing mechanism of individuals. A study by the National Institutes of Health has established that high intensity sounds can cause hearing damage of either a temporary, or worse, a permanent nature; regardless of the age of the person. While sound levels below 75 decibels are considered comparatively harmless and have been found not to cause any kind of permanent hearing loss; sound levels greater than 85 decibels and regular exposure of approximately 8 hours per day, on an average, has been …

Critical Heat Stress Evaluation In Two Ebola Ensembles, Christopher T. Lee

USF Tampa Graduate Theses and Dissertations

Ebola, a type of filovirus that causes hemorrhagic fevers, dominated global headlines in 2014 when the largest Ebola epidemic in history took place in West Africa. Healthcare practitioners were at particular risk of contracting Ebola while taking care of patients with the disease because they were easily exposed to bodily fluids such as blood, urine, saliva, and feces, quite often in the intensive care unit (ICU). While personal protective equipment (PPE) protects the healthcare practitioner by providing an effective barrier against the virus, users were also at risk for heat stress because of the type of protective clothing. In this …

Risk Factors Associated With Non-Compliance With The Respiratory Protection Program Among Firefighters, Brandon Dawkins

USF Tampa Graduate Theses and Dissertations

Introduction: Non-compliance with respiratory protection programs among firefighters may put them at increased risk of injury and illness from occupational exposures during fire extinguishing activities. This research aims to characterize respiratory protection practices among Florida firefighters. This information will allow better understanding of factors that are associated with non-compliance with respiratory protection guidelines.

Methods: Survey questionnaire was used to characterize Florida fire departments in this cross sectional study. Four hundred and seventy-seven surveys were administered to Florida firefighters both in person and electronically to collect information regarding firefighter knowledge and participation in their respective respiratory protection programs during the past …