Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 14 of 14
Full-Text Articles in Medicine and Health Sciences
Design And Printing Of A Low-Cost 3d-Printed Nasal Osteotomy Training Model: Development And Feasibility Study., Michelle Ho, Jared Goldfarb, Roxana Moayer, Uche Nwagu, Rohan Ganti, Howard Krein, Ryan Heffelfinger, Morgan Leigh Hutchinson
Design And Printing Of A Low-Cost 3d-Printed Nasal Osteotomy Training Model: Development And Feasibility Study., Michelle Ho, Jared Goldfarb, Roxana Moayer, Uche Nwagu, Rohan Ganti, Howard Krein, Ryan Heffelfinger, Morgan Leigh Hutchinson
Department of Otolaryngology - Head and Neck Surgery Faculty Papers
BACKGROUND: Nasal osteotomy is a commonly performed procedure during rhinoplasty for both functional and cosmetic reasons. Teaching and learning this procedure proves difficult due to the reliance on nuanced tactile feedback. For surgical simulation, trainees are traditionally limited to cadaveric bones, which can be costly and difficult to obtain.
OBJECTIVE: This study aimed to design and print a low-cost midface model for nasal osteotomy simulation.
METHODS: A 3D reconstruction of the midface was modified using the free open-source design software Meshmixer (Autodesk Inc). The pyriform aperture was smoothed, and support rods were added to hold the fragments generated from the …
3d - Printed Patient Specific Instrumentation In Corrective Osteotomy Of The Femur And Pelvis: A Review Of The Literature, Njalalle Baraza, Chris Chapman, Sima Zakani, Kishore Mulpuri
3d - Printed Patient Specific Instrumentation In Corrective Osteotomy Of The Femur And Pelvis: A Review Of The Literature, Njalalle Baraza, Chris Chapman, Sima Zakani, Kishore Mulpuri
General Surgery, East Africa
Background: The paediatric patient population has considerable variation in anatomy. The use of Computed Tomography (CT)-based digital models to design three-dimensionally printed patient specific instrumentation (PSI) has recently been applied for correction of deformity in orthopedic surgery. This review sought to determine the existing application of this technology currently in use within paediatric orthopaedics, and assess the potential benefits that this may provide to patients and surgeons.
Methods: A review was performed of MEDLINE, EMBASE, and CENTRAL for published literature, as well as Web of Science and clinicaltrials.gov for grey literature. The search strategy revolved around the research …
Endoscopic Removal Of Fractured 3d-Printed Nasopharyngeal Swabs From The Olfactory Cleft During Covid-19, Matthew Miller, Kristy Carlson, Jayme Dowdall, Christie Barnes, Sam Pate
Endoscopic Removal Of Fractured 3d-Printed Nasopharyngeal Swabs From The Olfactory Cleft During Covid-19, Matthew Miller, Kristy Carlson, Jayme Dowdall, Christie Barnes, Sam Pate
Graduate Medical Education Research Journal
The severe acute respiratory syndrome SARS-CoV-2 pandemic has posed significant challenges to hospital and public health systems in the United States. In response to a shortage in nasopharyngeal swabs, our institution developed, tested, and deployed 3D-printed swabs to obtain a specimen for testing. A patient was tested in preparation for a scheduled Esophagogastrodeuodenoscopy. During the procedure the swab broke and a portion remained in the superior meatus and olfactory cleft. This case study describes the process of locating and removing the broken sections of the 3D-printed swab. In response to this incident, 3D-printing teams test swabs for sample collection and …
A Clinically Representative Rat Model Of Hip Hemiarthroplasty, Adam Dm Paish
A Clinically Representative Rat Model Of Hip Hemiarthroplasty, Adam Dm Paish
Electronic Thesis and Dissertation Repository
Joint replacement is an increasingly common surgery with over 130,000 procedures performed annually in Canada. Although joint replacement surgery is highly successful, implants do not last a lifetime, and often have to be replaced via costly revision surgeries. Before innovations aimed at extending the life of implants are applied to the clinic, testing must be performed in animal models. Clinically representative small-animal models of joint replacement would be ideal in the initial stages of research and development, due to ease of handling and low costs, but few such models have been established in the literature. Thus, we describe the development …
Initial Experience Using 3-Dimensional Printed Models For Head And Neck Reconstruction In Haiti., Swar Vimawala, Terry Gao, Jared Goldfarb, Dominick Gadaleta, Bon Ku, Patrick Jean-Gilles, Adam Luginbuhl, Robert Pugliese, Donald Weed, Joseph M Curry
Initial Experience Using 3-Dimensional Printed Models For Head And Neck Reconstruction In Haiti., Swar Vimawala, Terry Gao, Jared Goldfarb, Dominick Gadaleta, Bon Ku, Patrick Jean-Gilles, Adam Luginbuhl, Robert Pugliese, Donald Weed, Joseph M Curry
Department of Otolaryngology - Head and Neck Surgery Faculty Papers
This report describes the first use of a novel workflow for in-house computer-aided design (CAD) for application in a resource-limited surgical outreach setting. Preoperative computed tomography imaging obtained locally in Haiti was used to produce rapid-prototyped 3-dimensional (3D) mandibular models for 2 patients with large ameloblastomas. Models were used for patient consent, surgical education, and surgical planning. Computer-aided design and 3D models have the potential to significantly aid the process of complex surgery in the outreach setting by aiding in surgical consent and education, in addition to expected surgical applications of improved anatomic reconstruction.
A Comparison Efficacy Study Of Commercial Nasopharyngeal Swabs Versus A Novel 3d Printed Swab For The Detection Of Sars-Cov-2, Forest W. Arnold, Gerald Grant, Phillip F. Bressoud, Stephen P. Furmanek, Donghoon Chung, Nadine Sbaih, Dipan Karmali, Meredith Cahill, George Pantalos
A Comparison Efficacy Study Of Commercial Nasopharyngeal Swabs Versus A Novel 3d Printed Swab For The Detection Of Sars-Cov-2, Forest W. Arnold, Gerald Grant, Phillip F. Bressoud, Stephen P. Furmanek, Donghoon Chung, Nadine Sbaih, Dipan Karmali, Meredith Cahill, George Pantalos
The University of Louisville Journal of Respiratory Infections
Introduction: The large volume of diagnostic tests required by the response to the COVID-19 pandemic resulted in a shortage of commercial nasopharyngeal swabs. In an effort to alleviate the shortage, swabs created by 3D printing may be a solution.
Methods: We designed and produced 3D printed swabs and sought to compare their ability to detect SARS-CoV-2 in patients admitted for COVID-19 or who were suspected of having COVID-19.
Results: A total of 30 patients were swabbed with a commercial and a 3D printed swab. Results matched in 27 of 30 patients (90%). Two patients were discordant with a positive commercial …
Left Atrial Appendage Printing Process, Areli Reyes, Brandon James Mukai, Mia Noelle Von Knorring
Left Atrial Appendage Printing Process, Areli Reyes, Brandon James Mukai, Mia Noelle Von Knorring
Biomedical Engineering
The left atrial appendage senior design team aims to assist in closing off the left atrial appendage that is susceptible to coagulation due to non-valvular atrial fibrillation. Coagulation in the left atrial appendage (LAA) can be life threatening as it can lead to a stroke. Dr. Chris Porterfield performs a procedure that uses the Boston Scientific Watchman to close the appendage. He finds that sizing the Watchman properly is difficult with limited visuals from live CT scans. He proposed converting the CT scans into a 3D printed model of the left atrial appendage and left atrium so he can visually …
3d Printing Of Bone Spurs Before Surgical Removal, Katelyn Koons, John Paul Prodoehl, Matthew Chadwick, Chris Li, Lauren Schlegel, Jeffrey Henstenburg, Md
3d Printing Of Bone Spurs Before Surgical Removal, Katelyn Koons, John Paul Prodoehl, Matthew Chadwick, Chris Li, Lauren Schlegel, Jeffrey Henstenburg, Md
Phase 1
Project Background: In the United States, 2% of the population will experience bone spurs, which will not resolve on their own.1 Of people over 60 who experience a bone spur, 40% will require medical attention.2 The soft tissue visualization appears to be difficult with imaging, leaving increased chance of poor balancing of the knee replacement. Osteophyte structure continues to be difficult to visualize in a 3D way and without their proper removal, can lead to increased rate of revision surgery. Having a 3D model of the bone spur may decrease risk of complication and enhance soft tissue modification …
3d Printing Of Bone Spurs Before Surgical Removal During Total Knee Arthroplasty, John Paul Prodoehl
3d Printing Of Bone Spurs Before Surgical Removal During Total Knee Arthroplasty, John Paul Prodoehl
Phase 1
Project Background: In the United States, total knee arthroplasty (TKA) is the most performed orthopaedic operation. Among the 700,00 patients who received TKA, 21-25% underwent revision due to knee instability. Proper stability of a TKA depends on soft tissue balance for proper alignment in flexion and extension, and improper soft tissue modification is the primary cause of early implant failure. Soft tissue balancing can be complicated by presence of osteophytes on the distal femur or proximal tibia, which may require removal. The three-dimensional structure of osteophytes is often difficult to visualize with imaging, which could cause incomplete removal. Utilizing 3D …
3d Printed Liver Models As A Tool To Improve Pre-Surgical Consultation And Enhance Patient Consent, Miranda Sill, Nathan Ott, Robert S. Pugliese, Pharmd, Bcps
3d Printed Liver Models As A Tool To Improve Pre-Surgical Consultation And Enhance Patient Consent, Miranda Sill, Nathan Ott, Robert S. Pugliese, Pharmd, Bcps
Phase 1
Background: 3D printing has recently emerged as an effective, cost-efficient tool for healthcare innovation. We propose the fabrication of 3D printed, patient-specific liver models as a pre-surgical planning and communication tool for liver resection surgery.
Methods: Creation of the model began with the segmentation of the patient's abdominal CT scan, where specific sections of their anatomy, including the blood vessels (portal and hepatic systems), gallbladder, and tumor (when applicable), were digitally segmented. Each structure was then printed in a unique color using polylactic acid (PLA) plastic filament on an Ultimaker 5s printer. Once printed the components were arranged anatomically and …
3d Printing Of Knee Models To Decrease Or Time And Reduce Revisional Surgery In Total Knee Arthroplasty (Tka), Lauren Schlegel, John Paul Prodoehl, Matthew Chadwick, Chris Li, Katelyn Koons, Jeffrey Henstenburg, Md
3d Printing Of Knee Models To Decrease Or Time And Reduce Revisional Surgery In Total Knee Arthroplasty (Tka), Lauren Schlegel, John Paul Prodoehl, Matthew Chadwick, Chris Li, Katelyn Koons, Jeffrey Henstenburg, Md
Phase 1
Project Background: Osteophytes are a common problem, affecting 2% of the United States population. For many elderly people, these osteophytes will cause them to seek medical attention. Due to the 2-D nature of MRIs and CT scans, it can be difficult to gain a complete understanding of the complicated soft tissue structures surrounding the joint when performing a Total Knee Arthroplasty(TKA). Without proper removal of osteophytes and correct soft tissue balancing, there is an increased rate of revisional surgery. By utilizing a 3-D model preoperatively and within the OR, surgeons can visualize various aspects of the knee to determine what …
Patient-Specific 3d Printed Liver Models For Pre-Operative Planning And Improved Patient Adherence, Nathan Ott, Miranda Sill, Robert S. Pugliese, Pharmd, Bcps, Ashesh P. Shah, Md
Patient-Specific 3d Printed Liver Models For Pre-Operative Planning And Improved Patient Adherence, Nathan Ott, Miranda Sill, Robert S. Pugliese, Pharmd, Bcps, Ashesh P. Shah, Md
Phase 1
Project Background: 3D anatomical relationships in the liver are not always visually accessible for surgeons performing resections even with advanced imaging options. Firm understanding of these relationships is essential for timely procedures, which can improve patient outcomes and lower hospital expenses. Patient-specific 3D modeling has existed for some time, though it is costly. New cost-effective techniques have surfaced which may yield opportunities for more effective preoperative planning in liver surgery and improved patient adherence.
Methods: Digital patient-specific 3D reconstruction of a liver was completed by interpolating data from MRI scans using 3D Slicer, a segmenting program. The liver model was …
3d Printing Of Bone Spurs Before Surgical Removal During Total Knee Arthroplasty, Chris Li, Jeffrey Henstenburg, Md, Katelyn Koons, John Paul Prodoehl, Matthew Chadwick, Lauren Schlegel
3d Printing Of Bone Spurs Before Surgical Removal During Total Knee Arthroplasty, Chris Li, Jeffrey Henstenburg, Md, Katelyn Koons, John Paul Prodoehl, Matthew Chadwick, Lauren Schlegel
Phase 1
Background: In the United States, total knee arthroplasty (TKA) is the most common performed orthopedic surgery, with over 700,000 cases per year. Overall, 21-25% underwent revision due to instability. Incorrect soft tissue balancing during the procedure can lead to improper alignment, flexion, and extension. Visualization of osteophytes in a 3D manner prior to removal is difficult and poses significant risks for improper balancing on TKA. The purpose of the study is to determine whether the utilization of 3D osteophyte models is beneficial to Orthopaedic surgeons in the course of care, specifically with regard to improving outcomes, decreasing complication rates, and …
3d Printing Of Bone Spurs Before Surgical Removal, Matthew Chadwick, John Paul Prodoehl, Katelyn Koons, Chris Li, Lauren Schlegel, Jeffrey Henstenburg, Md
3d Printing Of Bone Spurs Before Surgical Removal, Matthew Chadwick, John Paul Prodoehl, Katelyn Koons, Chris Li, Lauren Schlegel, Jeffrey Henstenburg, Md
Phase 1
Project Background: In the US alone, total knee arthroplasty is the most common performed orthopedic surgery, with over 700,000 cases per year.1 Overall, 21-25% underwent revision due to instability.2 The stability of a TKA depends largely on soft tissue balance for proper alignment in flexion and extension. Soft tissue balancing in TKA depends on posterior femoral condylar osteophytes, which prevent full extension of the knee and increase tension posteriorly. Pre-operative soft tissue visualization is difficult and this leaves an increased chance for implant failure and revision surgery. Having a 3D model of the bone spur before and during the surgery …