Engineering Commons^™

Liver Cancer: Current And Future Trends Using Biomaterials, Sue Anne Chew, Stefania Moscato, Sachin George, Bahareh Azimi, Serena Danti

Health & Biomedical Sciences Faculty Publications and Presentations

Hepatocellular carcinoma (HCC) is the fifth most common type of cancer diagnosed and the second leading cause of death worldwide. Despite advancement in current treatments for HCC, the prognosis for this cancer is still unfavorable. This comprehensive review article focuses on all the current technology that applies biomaterials to treat and study liver cancer, thus showing the versatility of biomaterials to be used as smart tools in this complex pathologic scenario. Specifically, after introducing the liver anatomy and pathology by focusing on the available treatments for HCC, this review summarizes the current biomaterial-based approaches for systemic delivery and implantable tools …

Ph-Sensitive Oxygen Release Microspheres To Enhance Cell Survival In Ischemic Condition, Zhongting Liu

McKelvey School of Engineering Theses & Dissertations

Ischemic diseases such as myocardial infarction, stroke and limb ischemia are severe cardiovascular diseases with high rate of death and millions of people suffered from these diseases. Under ischemic environment, cells die due to deficient supply of nutrient and oxygen. To regenerate ischemic tissues, stem cell therapy is a promising approach because stem cells can differentiate into cells necessary for the regeneration. However, stem cell therapy has limitations. For example, few cells can survive under harsh ischemic environment. To enhance stem cells survival, implantation of oxygen release microspheres to sustained supply cells with oxygen represents an effective strategy. Previously, our …

The Co-Delivery Of Syngeneic Adipose-Derived Stromal Cells And Macrophages On Decellularized Adipose Tissue Bioscaffolds For In Vivo Soft Tissue Regeneration, Hisham A. Kamoun

Electronic Thesis and Dissertation Repository

Decellularized adipose tissue (DAT) bioscaffolds are a promising platform for the delivery of pro-regenerative cell populations with the goal of promoting adipose tissue regeneration. The current study investigated the effects of seeding DAT bioscaffolds with syngeneic bone marrow-derived macrophages and/or adipose-derived stromal cells (ASCs) on in vivo soft tissue regeneration. Methods were established to derive the macrophages from MacGreen mice, which were dynamically seeded onto the DAT scaffolds alone or in combination with ASCs. Seeded and unseeded scaffolds were implanted subcutaneously into C57Bl/6 mice. At 2 and 4 weeks, cell infiltration, angiogenesis, and adipogenesis were analyzed through histology and immunohistochemistry. …

Fabrication And Imaging Characterization Of Poly (Dimethyl Siloxane)/Sic Nano-Fillers Samples As Model Biomaterials, Tetiana Soloviova, Viorica Gutu, Zoya Vinokur, Akm S. Rahman, Subhendra Sarkar

Publications and Research

Biopolymers are being developed with embedded nanostructures for in vivo drug delivery to treat various diseases including cancers. In the current project we developed fabrication steps to prepare two biopolymers, poly di-methoxy siloxane (PDMS) with 0-0.9 vol% of SiC nano whisker (fillers) followed by non- destructive characterization. Optical reflection microscopy (5-100X) was performed to ensure loading and distribution of increasing SiC content. Optical microscopy showed progressively higher SiC distribution as filler loading was increased from 0-0.9 vol%. X-ray imaging at low kV (kilovoltage) and low mAs (milliamperage per second) were optimized to allow distinction between filled PDMS with SiC concentration …

Application Of Halloysite Nanotubes In Bone Disease Remediation And Bone Regeneration, Yangyang Luo

Doctoral Dissertations

Customized patient therapy has been a major research focus in recent years. There are two research fields that have made a significant contribution to realizing individualized-based treatment: targeted drug delivery and three-dimensional (3D) printing technology. With benefit from the advances in nanotechnology and biomaterial science, various drug delivery systems have been established to provide precise control of therapeutic agents release in time and space. The emergence of three-dimensional (3D) printing technology enables the fabrication of complicated structures that effectively mimic native tissues and makes it possible to print patient-specific implants. My dissertation research used a clay nanoparticle, halloysite, to develop …

Characterization Of Nano-Cellulose Based Composites For Biomedical Applications, Mitchell P. Chesley

Electronic Theses and Dissertations

The number of orthopedic surgeries performed globally has steadily increased over the past decade due to the standardization of procedures as well as technological advancements. During this time orthopedic devices have been composed predominantly of metals, such as Titanium, Vanadium, Molybdenum, and Stainless steel, as well as their alloys, due to the high strength and durability of these materials. However, metals may, in fact, be suboptimal for orthopedic devices. For example, metals exhibit Young’s modulus much greater than the surrounding bone, inducing localized stress-shielding promoting cortical atrophy, which can lead to osteoporosis. In recent years polymers have been successfully explored …

Design, Construction And Application Of A Home-Built, Two-Photon Microscope, William P. Breeding

Electronic Theses and Dissertations

Two-photon microscopy (TPM) is a powerful, versatile imaging modality for the study of biological systems. This thesis overviews the relevant physics involved in TPM, design considerations and process of constructing a home-built, two-photon microscope, and provides a set of procedures to operate the system. Furthermore, this work explores several applications of TPM through the study of single-cell metabolism and imaging the cellular-material interface. Explored in particular depth was the imaging of cellulose nanofiber (CNF) materials, with the goal of understanding the three-dimensional nature of fibroblast cell growth when embedded within the materials. This work uncovered several optical properties of CNF, …

Investigation Of The Effect Of Age On Regenerative Outcomes Following Treatment Of Volumetric Muscle Loss Injuries, John Taehwan Kim

Graduate Theses and Dissertations

Volumetric muscle loss (VML) is a traumatic injury in skeletal muscle resulting in the bulk loss of more than 20% of the muscle’s volume. Included in the bulk loss of muscle is the skeletal muscle niche comprised of nerve bundles, vasculature, local progenitor cells, basal lamina, and muscle fibers, overwhelming innate repair mechanisms. The hallmark of VML injury is the excessive accumulation of non-contractile, fibrotic tissue and permanent functional deficits. Though predominant in the younger demographic, the elderly population is also captured within VML injuries. There are many factors that change with aging in skeletal muscle that may further hinder …

Multidirectional Pin-On-Disk Testing Device To Evaluate The Cross-Shear Effect On The Wear Of Biocompatible Materials, Vicente Cortes, Carlos A. Rodriguez Betancourth, Javier A. Ortega, Hasina Huq

Mechanical Engineering Faculty Publications and Presentations

One of the main causes of hip prostheses failure is the premature wear of their components. Multi-directional motion or “cross-shear” motion has been identified as one of the most significant factors affecting the wear rate of UHMWPE in total hip joint replacement prostheses. To better evaluate the effect of this cross-shear motion on the tribological behavior of different biomaterials, a new wear testing device has been designed and developed. This new instrument is capable to reproduce the “cross-shear” effect with bidirectional motion on bearing materials and to determine coefficient of friction (COF) between surfaces during testing. To validate the functionality …

Two And Three-Dimensional Models For Material And Cells Interaction, Nam H. Nguyen

Doctoral Dissertations

Three-dimensional (3D) cell spheroid model has been long considered a better model to mimic in vivo physiology compared to two-dimensional (2D) cell culture model. Traditional 2D cell models provide a simple, convenient and quick technique for drug screening but fail to simulate the complexity and heterogeneity of cells in the in vivo environment. The last few decades have remarked substantial progress toward the advancement of three-dimensional (3D) cell cultures as systems which better mimic cellcell and cell-matrix interaction in the in vivo physiology. Nowadays, 3D cell models have been emerging, not only as an important approach in drug discovery and …

Improved Orthopaedic Repairs Through Mechanically Optimized, Adhesive Biomaterials, Stephen Wheeler Linderman

McKelvey School of Engineering Theses & Dissertations

Despite countless surgical advances over the last several decades refining surgical approaches, repair techniques, and tools to treat tendon and tendon-to-bone injuries, we are still left with repair solutions that rely on fairly crude underlying mechanical principles. Musculoskeletal soft tissues have evolved to transfer high loads by optimizing stress distribution profiles across the tissue at each length scale. However, instead of mimicking these natural load transfer mechanisms, conventional suture approaches are limited by high load transfer across only a small number of anchor points within tissue. This leads to stress concentrations at anchor points that often cause repair failure as …

Elucidating The Roles Of Astrocyte-Derived Factors In Recovery And Regeneration Following Spinal Cord Injury, Russell E. Thompson

McKelvey School of Engineering Theses & Dissertations

Central nervous system (CNS) injury often causes some level of long-term functional deficit, due to the limited regenerative potential of the CNS, that results in a decreased quality of life for patients. CNS regeneration is inhibited partly by the development of a glial scar following insult that is inhibitory to axonal growth. The major cell population responsible for the formation this glial scar are astrocytes, which has led to the belief that astrocytes are primarily inhibitory following injury. Recent work has challenged this conclusion, finding that astrocyte reactivity is heterogeneous and that some astrocytes are pro-regenerative following injury. Astrocyte transplantation …

Evaluation Of Novel Hemocompatible Surface Coatings For Extracorporeal Life Support: A Biocompatible Alternative To Systemic Anticoagulation, Teryn Rose Roberts

USF Tampa Graduate Theses and Dissertations

Extracorporeal life support (ECLS) is a class of technologies used to support or replace the function of failing organs. During ECLS, blood is withdrawn from systemic circulation and circulated through an artificial organ or “treatment membrane” that performs the function of the failing organ, prior to return to systemic circulation. While ECLS provides life-saving therapy to wide patient populations from pre-term infants to combat-wounded soldiers, this therapy is limited due to secondary thrombotic and bleeding complications that result from: 1) exposure of blood to the foreign surfaces in the device circuit and 2) administration of anticoagulant drugs to prevent clot …

Forcespinning Technique For The Production Of Poly(D,L-Lactic Acid) Submicrometer Fibers: Process–Morphology–Properties Relationship, Victoria Padilla-Gainza, Graciela Morales, Heriberto Rodríguez-Tobías, Karen Lozano

Mechanical Engineering Faculty Publications and Presentations

This work addresses a systematic study for the process development and optimization of poly(d,l-lactic acid) (PDLLA) submicrometer fibers utilizing the centrifugal spinning technique known as Forcespinning. This study analyzes the effect of polymer concentration (8, 10, and 12 wt %) and angular speed on the fiber morphology, diameter distribution, and fiber yield. The increase in polymer concentration and angular speed favored the formation of continuous and homogeneous submicrometer fibers with an absence of bead formation and higher output. The optimal conditions were established considering the morphological characteristics that exhibit a greater surface area (homogeneous and submicrometer fibers); and they were …

Biomaterial Substrate Modifications That Influence Cell-Material Interactions To Prime Cellular Responses To Nonviral Gene Delivery, Amy Mantz, Angela K. Pannier

Biological Systems Engineering: Papers and Publications

Gene delivery is the transfer of exogenous genetic material into somatic cells to modify their gene expression, with applications including tissue engineering, regenerative medicine, sensors and diagnostics, and gene therapy. Viral vectors are considered the most effective system to deliver nucleic acids, yet safety concerns and many other disadvantages have resulted in investigations into an alternative option, i.e. nonviral gene delivery. Chemical nonviral gene delivery is typically accomplished by electrostatically complexing cationic lipids or polymers with negatively charged nucleic acids. Unfortunately, nonviral gene delivery suffers from low efficiency due to barriers that impede transfection success, including intracellular processes such as …

Chondroitin Sulfate Hydrogels For Total Wound Care Devices, Tushar Goswami

Browse all Theses and Dissertations

Chondroitin sulfate (CS) is a naturally occurring bio-polymer found in areas of high cartilage in mammals. In directed applications, such as hydrogels, CS can be used to impact keratinocyte growth cycles. In this work, CS based hydrogels were utilized to accelerate wound healing and, in conjunction with a graphene sensor, monitor wound fluid pH. The hydrogels were cast onto a graphene field effect transistor (GFET) to obtain the benefits of the hydrogel wound healing capabilities, while also utilizing the pH sensitivity of the graphene. Results showed that the hydrogel caused a fivefold increase in cell size over the course of …

Magnetic Nanoparticles For Hyperthermia For Cancer Treatment, Bianca Paola Meneses Brassea

Open Access Theses & Dissertations

Fe3O4 and NixCu4-x magnetic nanoparticles were synthesized using supercritical conditions of liquids and wet chemistry, respectively. Characterization methods (VSM, SEM, TEM, and magnetic hyperthermia) yielded results that prove feasibility for magnetic hyperthermia for cancer treatment.

The Influence Of 3d Porous Chitosan-Alginate Biomaterial Scaffold Properties On The Behavior Of Breast Cancer Cells, Minh-Chau N. Le

Honors Undergraduate Theses

The tumor microenvironment plays an important role in regulating cancer cell behavior. The tumor microenvironment describes the cancer cells, and the surrounding endothelial cells, fibroblasts, and mesenchymal stem cells, along with the extracellular matrix (ECM). The tumor microenvironment stiffens as cancer undergoes malignant progression, providing biophysical cues that promote invasive, metastatic cellular behaviors. This project investigated the influence of three dimensional (3D) chitosan-alginate (CA) scaffold stiffness on the morphology, growth, and migration of green fluorescent protein (GFP) – transfected MDA-MB-231 (231-GFP) breast cancer (BCa) cells. The CA scaffolds were produced by the freeze casting method at three concentrations, 2 wt%, …

Characterization Of In-Vivo Damage In Implantable Cardiac Devices And The Lead Residual Properties, Anmar Mahdi Salih

Browse all Theses and Dissertations

Approximately, 92.1 million patients in the US suffer from cardiovascular diseases with an estimated healthcare cost of over $300 billion; out of which at least one million patients have Cardiac Implantable Electronics Devices (CIED). CIED represented by pacemakers, Implantable Cardioversion Defibrillator (ICD), and Cardiac Resynchronization Therapy (CRT) are exposed to in-vivo damage. These damages are complex and composed on multiple levels and present challenges while assessing their combined extent. Since 2004, more than one hundred recalls were reported for cardiac devices. ICD devices had the majority with 40.8% recalls, pacemaker recall percentage was 14.5%, CRT recall percentage was12.7%, leads recalls …

Biomaterials For Bone Regeneration, Youqu Shen

Doctoral Dissertations

"The purpose of this Ph.D. research is to investigate and improve two classes of hydroxyapatite (HA)-based biomaterials for bone repair: calcium phosphate microspheres and bioactive silicate glass scaffolds. These biomaterials were prepared with modified compositions and microstructures and then were evaluated for bone regeneration.

The open HA microspheres with dense convex surfaces and rough and porous concave surfaces were obtained by sectioning closed hollow HA microspheres. Bone regeneration with the open HA microspheres was greater than with the closed HA microsphere at 12 weeks. Hollow biphasic calcium phosphate (BCP) microspheres have been prepared with different fractions of HA and β-TCP …