Engineering Commons^™

Energy Performance Certification: Misassessment Due To Assuming Default Heat Losses, Ciara Ahern, Brian Norton

Articles

Energy Performance Certificates (EPCs) are issued when dwellings are constructed, sold or leased in the EU. Where the cost of obtaining the required data is prohibitive, EPC assessors use nationally applicable default-values. To ensure that dwellings are not assigned a wrongly-higher EPC rating, a standardised thermal bridging transmittance coefficient (Y-value) is typically adopted for all existing dwellings while worst-case overall heat loss coefficients (U-values) are used. Default U-values are applied to a specific building element type (roof, wall, floor etc.) based on building codes and regulations applicable at time of construction. Due to significant building fabric upgrades, default U-values are …

Using Machine Learning Classification Methods To Detect The Presence Of Heart Disease, Nestor Pereira

Dissertations

Cardiovascular disease (CVD) is the most common cause of death in Ireland, and probably, worldwide. According to the Health Service Executive (HSE) cardiovascular disease accounting for 36% of all deaths, and one important fact, 22% of premature deaths (under age 65) are from CVD.

Using data from the Heart Disease UCI Data Set (UCI Machine Learning), we use machine learning techniques to detect the presence or absence of heart disease in the patient according to 14 features provide for this dataset. The different results are compared based on accuracy performance, confusion matrix and area under the Receiver Operating Characteristics (ROC) …

Factor Analysis Of Mixed Data (Famd) And Multiple Linear Regression In R, Nestor Pereira

Dissertations

In the previous projects, it has been worked to statistically analysis of the factors to impact the score of the subjects of Mathematics and Portuguese for several groups of the student from secondary school from Portugal.

In this project will be interested in finding a model, hypothetically multiple linear regression, to predict the final score, dependent variable G3, of the student according to some features divide into two groups. One group, analyses the features or predictors which impact in the final score more related to the performance of the students, means variables like study time or past failures. The second …

A-Step 2030 – New Research Project Presents A Picture Of The Skills Needed For Engineers To Solve The Sustainable Development Goals (Sdgs)., Una Beagon

Articles

Communication and Technical Skills will still be the most important attributes required of engineers in the future, according to a new study by the A-STEP 2030 Erasmus+ funded project. The project which is led by ENSTA Bretagne, France and has academic partners in TU Dublin, Metropolia University of Applied Sciences in Finland and Aalborg University in Denmark aims to develop innovative teaching approaches for engineering students which will attract a more diverse student body to the engineering profession.

Contextual Influences On Human Resources Development: Considerations And Evaluations On The Various External And Internal Factors That Shape And Influence Hrd In Organisations, Charles Alves De Castro

Articles

This article aims to briefly understand and evaluate the main external and internal factors that impact directly on human resources development area within the organisations, mainly related to multinational companies. Also, it discusses the various aspects and influences on HRD-(Human Resources Development) such as societal, organisational/local, global, that impacts on costs, environment, regulations, policies, culture, beliefs, technology and values. This research was carried out by way of a literature review. This is important to demonstrate, explain and evaluate the current existent literature about this specific theme covered in this article. Furthermore, through this review we compared previous research on HRD. …

Experimental Investigation Of Flow Pulsation Waveforms In Rectangular Mesochannels For High Heat Flux Electronics Cooling, Jaakko Mcevoy, Sajad Alimohammadi, Tim Persoons

Articles

The ever rising heat fluxes encountered in electronic devices present a challenging thermal engineering problem. Not only is heat transfer enhancement a goal but more recently control of the enhancement is desired, especially in large scale data facilities where the heated outlet coolant fluid may be of use. Flow pulsation is one of the most common active heat transfer enhancement methods studied across all heat sink sizes. While the effects of pulsation have been shown to increase heat transfer under certain conditions there is still disagreement upon its merit for practical applications, with the majority of previous research has been …

A Generalisable Bottom-Up Methodology For Deriving A Residential Stock Model From Large Empirical Databases, Ciara Ahern, Brian Norton

Articles

Specifying representative reference buildings as a prerequisite for calculating cost-optimal energy performance requirements for buildings and building elements. Appropriate characterisation is prerequisite data for an overall national building energy consumption model to produce valid outcomes. Energy Performance Certificates (EPCs) are issued in the EU, for dwellings whenever they are constructed, sold or leased. Where acquiring data for an EPC would be prohibitively costly, nationally applicable default-values are employed for the building envelope thermal transmittance coefficients. Significant levels of retrofits led to the default-values used now being higher than is typical in reality, leading to characterisations of reference dwellings based on …

Magnetic Field Sensor Based On A Tri-Microfiber Coupler Ring In Magnetic Fluid And A Fiber Bragg Grating, Fangfang Wei, Dejun Liu, Arun Mallik, Gerald Farrell, Qiang Wu, Gang-Ding Peng, Yuliya Semenova

Articles

In this paper we propose and investigate a novel magnetic field sensor based on a Tri-microfiber coupler combined with magnetic fluid and a fiber Bragg grating (FBG) in a ring. A sensitivity of 1306 pm/mT was experimentally demonstrated in the range of magnetic fields from 0 to 15 mT. The reflection peak in the output spectrum associated with the FBG serves as a reference point allowing to avoid ambiguity in determining the spectral shift induced by the magnetic field. Due to its high sensitivity at low magnetic fields, the proposed structure could be of high interest in low field biosensing …

Using Phenomenography In Engineering Education, Una Beagon

Other resources

A phenomenographic study of academic conceptions of professional skills in engineering programmes in Ireland

Thermal Energy Refurbishment Status Of The Irish Housing Stock, Ciara Ahern, Brian Norton

Articles

Energy Performance Certificates (EPCs) are issued for buildings constructed, sold or leased across the EU. Using a generalizable methodology this work exploits Ireland's EPC national dwelling stock database to determine the thermal refurbishment status of Ireland's housing stock. It is estimated in 2014 that; i) 58% of walls were insulated at a mean overall heat loss coefficient or U-value of 0.66 W/m²K, ii) 67% of roofs were insulated at a mean U-value 0.37 W/m²K, iii) 97% of windows were double-glazed, and iv) 53% of floors were insulated to a mean U-value of 0.59 W/m²K. …

Development And Characterisation Of High Surface Energy Microstructured Sol-Gel Coatings For Sensing Applications, Emma Machugh

Doctoral

This study investigates the development of high surface energy photoreactive organic inorganic hybrid sol-gel coatings for the microstructuration of high-resolution microfluidic platforms and optofluidic biosensor platforms by standard photolithography processes. To achieve this, the first step of our work consisted of identifying the fundamental physico chemical processes governing the structuration and surface properties of hybrid organic inorganic sol-gel coatings. For this purpose, a reference material based on the combination of an organosilane (3-Methacryloxypropytrimethoxysilane, MAPTMS) and a transition metal (zirconium propoxide, ZPO), was firstly developed and characterised. It was highlighted that chemical, physical and combined physical and chemical processes can be …

Size Matters: The Impact Of Training Size In Taxonomically-Enriched Word Embeddings, Alfredo Maldonado, Filip Klubicka, John D. Kelleher

Articles

Word embeddings trained on natural corpora (e.g., newspaper collections, Wikipedia or the Web) excel in capturing thematic similarity (“topical relatedness”) on word pairs such as ‘coffee’ and ‘cup’ or ’bus’ and ‘road’. However, they are less successful on pairs showing taxonomic similarity, like ‘cup’ and ‘mug’ (near synonyms) or ‘bus’ and ‘train’ (types of public transport). Moreover, purely taxonomy-based embeddings (e.g. those trained on a random-walk of WordNet’s structure) outperform natural-corpus embeddings in taxonomic similarity but underperform them in thematic similarity. Previous work suggests that performance gains in both types of similarity can be achieved by enriching natural-corpus embeddings with …

Attracting Diverse Talent To The Engineering Professions Of 2030 : Eu Research Project, Una Beagon

Other resources

This conference examines education in Irish engineering in an international context, including skills to achieve the UN Sustainable Development Goals and to succeed in a digital world. International and national speakers will address global challenges, future engineering skills, academic standards, and graduate mobility. Attendees will also have the opportunity to share ideas on educating students in this field and to shape Engineers Ireland’s accreditation process.

Part of an EU Research project.

Thermal Refurbishment Status Of The Irish Housing Stock, Ciara Ahern, Brian Norton

Articles

Energy Performance Certificates (EPCs) are issued for buildings constructed, sold or leased across the EU. Using a generalizable methodology this work exploits Ireland’s EPC national dwelling stock database to determine the thermal refurbishment status of Ireland’s housing stock. It is estimated in 2014 that; i) 58% of walls were insulated at a mean overall heat loss coefficient or U-value of 0.66 W/m 2 K, ii) 67% of roofs were insulated at a mean U-value 0.37 W/m 2 K, iii) 97% of windows were double-glazed, and iv) 53% of floors were insulated to a mean U-value of 0.59 W/m 2 K. …

Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …

Centres Of Excellence And Roadmaps For Digital Transition: Lessons For Ireland’S Construction Industry, Barry Mcauley, Alan Hore, Roger West

Conference papers

Like most sectors in today’s working world, construction businesses are challenged to work in an increasingly digitised world with sophisticated demands from intelligent clients. So much has been written about the inefficiencies of the construction industry, its fragmentation, lack of collaboration, low margins, adversarial pricing, poor productivity, financial fragility, lack of research and development, poor industry image and relatively weak use of digital solutions. The Irish government recognises the importance of digital innovation to address many of the challenges the construction industry faces. With recent high profile reports of escalating spend on signature public sector projects and weak productivity performance …

Bim In Ireland 2019: A Study Of Bim Maturity And Diffusion In Ireland, Barry Mcauley, Alan Hore, Roger West

Conference papers

In 2017, the BIM Innovation Capability Programme team applied five macro BIM maturity conceptual models to capture the capability of the Irish construction industry and assess its BIM maturity. The results found that while Ireland is mature for modelling processes, it is less developed with regards to collaboration processes and policies. Ireland also ranked poorly when it came to regulatory frameworks, measurements and benchmarks compared to a number of countries which also applied the same conceptual models. At the time, the findings highlighted that Ireland’s diffusion dynamic was middle out, meaning that larger organisations or industry associations were pushing the …

An Investigation Into Current Procurement Strategies That Promote Collaboration Through Early Contractor Involvement With Regards To Their Suitability For Irish Public Work Projects, Barry Mcauley, Frederic Lefebvre

Conference papers

Previous research has established that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. While Lean Construction, Building Information Modelling (BIM), and Integrated Project Delivery (IPD) can all be viewed as separate processes which add independent value to a project, they are more effective when used in partnership with each other. In order to ensure the high levels of collaboration expected for these processes to work in unison, the early involvement of the Contractor is paramount. Early contractor involvement within the design process can ensure a more focused integrated project team, improvement of both constructability and cost certainty, as …

From Roadmap To Implementation: Lessons For Ireland’S Digital Construction Programme, Barry Mcauley, Alan Hore, Roger West

Conference papers

As part of their Future of Construction initiative in 2018 the World Economic Forum published an action plan to accelerate Building Information Modelling adoption. The WEF report highlighted actions that companies, industry organisations and governments are advised to implement to accelerate BIM adoption and better capitalise on delivering better project outcomes. According the authors of the report BIM is seen as the centrepiece of the construction industry’s digital transformation, however they acknowledged that BIM adoption globally remain slow. Anecdotal experience would suggest that BIM usage in Ireland is also very low and that a similar initiative or an adaptation of …

Accelerated Capital Allowances: An Overview, Bernard Doherty, James Mc Mahon, William Coffey, Ger Nagle, Kevin Delaney

Articles

ACA is based on the existing capital allowances tax structure or wear and tear allowance, for plants and machinery. Claiming the ACA is carried out the same way as for the standard capital allowances.

Organisations who invest in eligible energy-efficient capital equipment can deduct the full cost of the equipment from their profits in the year of purchase. This reduces the taxable profit in year one by the full cost of the equipment.

Delivering Energy Savings For The Supply Chain Through Building Information Modelling As A Result Of The Horizon 2020 Energy Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The global buildings sector is now responsible for 40% of final energy consumption as well as accounting for 33% of energy-related carbon dioxide emissions. This has resulted in a growing urgency to address energy and emissions from buildings and construction, to meet restrictive 2020 targets as specified by the European Union (EU). To achieve these targets a number of funding initiatives have been put in place through Horizon 2020 with a focus on BIM, due to it having the potential to rapidly produce energy outputs that enable design teams to analyse and compare the most cost-effective, energy-efficient options. However, despite …

Modelling The Addition Of Limestone In Cement Using Hydcem, Niall Holmes, Denis Kelliher, Mark Tyrer

Conference papers

Hydration models can aid in the prediction, understanding and description of hydration behaviour over time as the move towards more sustainable cements continues.

HYDCEM is a new model to predict the phase assemblage, degree of hydration and heat release over time for cements undergoing hydration for any w/c ratio and curing temperatures up to 450C. HYDCEM, written in MATLAB, complements more sophisticated thermodynamic models by predicting these properties over time using user-friendly inputs within one code. A number of functions and methods based on up to date cement hydration behaviour from the literature are hard-wired into the code along with …

Using Bluetooth Low Energy Devices To Monitor Visitor Activity In Remote Amenity Spaces, Ahlam Al Anbouri, David Powell, Damon Berry, John Mcgrory, Niall Holmes, Lorraine D'Arcy

Conference Papers

Tracking of pedestrian behaviour, particularly route selection and temporal behaviours, can be difficult to undertake. This is especially true of studies at a community or campus level where the anonymity of pedestrians can be difficult to protect. The introduction of the EU’s General Data Protection Regulations 2016 (GDPR) has increased the complexity of this challenge. Advances in Bluetooth Low Energy (BLE) technology in recent years have increased the potential to monitor human behaviour by tracking and triangulating pedestrians. This paper describes an experiment undertaken along The Great South Wall at the Port of Dublin, which is considered a leading amenity …

Competitive Strategies In Small And Medium Sized Enterprises (Sme's): A Cross- Case Analysis Of Irish Construction Professional Service Firms, Oluwasegun O. Seriki, Roisin Murphy

Conference papers

Strategy formulation aims to attain strategic fit between an organisation and its business environment in pursuit of competitive advantage. Although competitive strategy research is long established within industries such as manufacturing, financial services and IT, strategy within construction is still under-investigated by comparison. For construction professional service firms (CPSFs), the dearth of academic inquiry is even more apparent, partly due to the intangible nature of their service offerings, highly customised nature of their services and reliance on intellectual capital. The Irish construction sector is experiencing stable growth since following a prolonged recession, thus understanding the strategy process within professional service …

A Techno-Economic Analysis Of Current Cooling Techniques In Irish Data Centres, Lee Gibbons, Bryan Coyne, David Kennedy, Sajad Alimohammadi

Articles

This research is part of a comprehensive study to determine reformative actions for cooling regimes within the Irish data centre market. To achieve this goal, preliminary Exergy, Entropy change and operational cost analyses are used. It is determined that there is no clear advantage for using one cooling method over another without knowing the data centres secondary function (e.g. district heating, energy generation). Air cooling technology is a good candidate for a highly reliable system due to the low exhaust temperatures of 30°C. Two-phase immersion is a possibility for economically viable data centres where operational costs are to be minimised, …

Predicting The Hardness Of Turf Surfaces From A Soil Moisture Sensor Using Iot Technologies, Ann Marie Mckeon

Other

In horseracing, “the going” is a term to describe the racetrack ground conditions. In Ireland presently, a groundskeeper or course clerk walks the racecourse poking it with a blackthorn stick, assesses conditions, and declares the going – it is a subjective measurement.

This thesis will propose using remote low-cost soil moisture sensors to gather high frequency data about the soil water content in the ground and to enable informed decisions to be made. This will remove the subjective element from the ground hardness, and look at the data in an objective way.

The soil moisture sensor will systematically collect high …

Hydcem: A New Cement Hydration Model, Niall Holmes, Denis Kelliher, Mark Tyrer

Conference papers

Hydration models are useful to predict, understand and describe the behaviour of different cementitious-based systems. They are indispensable for undertaking long-term performance and service life predictions for existing and new products for generating quantitative data in the move towards more sustainable cements while optimising natural resources. One such application is the development of cement-based thermoelectric applications.

HYDCEM is a new model to predict the phase assemblage, degree of hydration, heat release and changes in pore solution chemistry over time for cements undergoing hydration for any w/c ratio and curing temperatures up to 450C. HYDCEM, written in MATLAB, is aimed at …

Optimizing The Valorization Of Industrial By-Products For The Induction Healing Of Asphalt Mixtures, Amir Tabakovic, Marta Vila-Cortavitarte, Daniel Jato-Espino, Daniel Castro-Fresno

Articles

Self-healing within asphalt pavements is the process whereby road cracks can be repaired automatically when thermal and mechanical conditions are met. To accelerate and improve this healing process, metal particles are added to asphalt mixtures. However, thisapproach is costly both in economic and environmental terms due to the use of virgin metallic particles. So, even though the self-healing of asphalt mixtures has been widely addressed in experimental terms over the years, there is a lack of research aimed at modelling this phenomenon, especially with the purpose of optimizing the use of metal particles through the valorization of industrial by-products. As …

Teaching Approximations Of Mechanical Engineering Practice Through Designing And Building Robots: An Approach Inspired By Monozukuri, Kevin Delaney, Ger Nagle

Conference Papers

Engineering design is a complex subject and undergraduate students, having learnt to quantify the performance of specific elements of engineering objects, often find it difficult to integrate these elements into quite basic design concepts. Upon entering the workforce engineering graduates must be able to do a great deal more than solve the technical problems taught in engineering school. To help students develop real-world engineering skills as part of their engineering education, the Mechanical Engineering Discipline in Technological University Dublin (TU Dublin) introduced Problem Based Learning (PBL) for Third Year Mechanical Engineering students in 2005.

A recent review of this teaching …

The Knowledge Development Box: An Overview, Kevin Delaney, Bernard Doherty, James Mc Mahon, William Coffey, Ger Nangle

Other resources

Finance Act 2015 introduced the Knowledge Development Box (KDB). The broad objective of the KDB is to promote innovation and provide an incentive whereby profits arising from patented inventions, copyrighted software and certain other specific asset classes can effectively be taxed at a reduced rate of 6.25%.