Concentrations, Sources, And Health Risks Of Particulate Matter In Southeast Us.: Current Status And Future Changes, Fenglin Han

LSU Doctoral Dissertations

Evaluation of long-term air quality trends and prediction of future air quality may help to design and demonstrate effectiveness of control strategies and guide future air quality management. As one of the six criteria air pollutants (CAPs) regulated by the US Environmental Protection Agency (EPA), particulate matter with aerodynamic diameter of 2.5 µm or less (PM_2.5) is of great interests since it has adverse effects on human health, visibility and climate. This study aims to understand the current status and future changes in concentrations, sources, and health risks of PM_2.5 in Southeast US. Firstly, observations were analyzed …

Rfid Item-Level Tagging In A Grocery Store Environment, Brian Truman

LSU Master's Theses

The purpose of this research was to investigate how effective item-level Radio Frequency Identification (RFID) tagging would be using current RFID technology as a replacement for barcodes in a supermarket/grocery store environment.

To accomplish this, an experiment was be performed that utilized commercially available RFID technology. Passive Ultra High Frequency (UHF) RFID Tags were affixed to various grocery store items of different material categories (Food, Metal, Plastic, Liquid, and Glass), and placed in a metal shopping cart. Eight (8) antenna arrangements were created, comprised of different combinations of four (4) antennas in different locations around the cart.

The experiment was …

Breaking Coastal Hypoxia: Destratification Of Gulf Of Mexico Deadzone To Encourage Oxygen Transport Downwards To Maintain Marine Fauna, Veda Thipparthi

LSU Master's Theses

As a consequence of seasonal eutrophication and human input, a vast hypoxic area termed The Dead Zone develops every year in the Gulf of Mexico (GOM) during summer along the Louisiana coastline characterized by vertical seawater density-stratification with oxygen concentrations less than 2 mg.l^-1 at the seafloor. It poses a threat to bottom-dwelling faunae and their environment which has negative ecological and economic consequences. This project aims to mitigate hypoxia by employing mechanical impellers placed at strategic water depths and locations in the Gulf. Enhanced transport of oxygen results by mixing oxygen-enriched seawater at the surface, downward into the …

Indocyanine-Green-Assisted Near-Infrared Dental Fluorescence Imaging To Detect Common Dental Diseases, As Compared With Dental X-Ray, Yoshita Viraj Holamoge

LSU Master's Theses

Oral health is indicative of a person’s overall health. Even with advances in medical science, dental diseases are very much prevalent in our society. Dental imaging techniques help in the early detection of these dental diseases and eventually avoids the risk of poor oral health as well as medical expenses. Current dental imaging techniques rely mostly on X-ray imaging whose ionizing property is a concern amongst the population. Near-infrared spectrum is known to have tissue penetration property and they belong to the non-ionizing part of the electromagnetic spectrum. This study utilized a contrast agent assisted near-infrared imaging for common dental …

Safety Assessment Of Road Vehicle In Crosswind Considering Driver Behavior, Jiexuan Hu

LSU Doctoral Dissertations

With expansion of the economy, more and more highway networks extend to coastal areas and mountain valley areas. Vehicles will be exposed to strong crosswinds when driven on these highway roads, especially in hurricane season and in winter in these two different topographic areas. Strong crosswinds threaten the safety of transportation infrastructure and passing vehicles in forms of vehicle accidents that usually result in traffic blockage and driver injury, posing negative effects on economic growth. This dissertation aimed to evaluate the vehicle safety when running through crosswinds in consideration of driver behaviors.

Firstly, the aerodynamic characteristics of road vehicles were …

Molecular Dynamics Simulations Of Interaction Of Dna Nucleotides And Lignin Oligomers With Small Molecules And Interfaces, Xinjie Tong

LSU Doctoral Dissertations

Molecular dynamics (MD) simulations of interaction of DNA nucleotides with self-assembled monolayers (SAMs) provide valuable information that is critical to the development of a new DNA sequencing technique. We investigated the interactions and transport characteristics of mononucleotides moving through nanoslits with SAMs-covered surfaces. Our simulations focused on nanoslits in which the walls were composed of three different types of SAMs: methylformyl terminated, methyl terminated, and phenoxy terminated. The results demonstrated that the phenoxy terminated surfaces have the shortest required nanoslits length for nucleotides separation.

Using MD simulations, we also investigated the interaction of mono-lignin and oligo-lignols with lipid bilayers and …

Effective Fuzzing Framework For The Sleuthkit Tools, Shravya Paruchuri

LSU Master's Theses

The fields of digital forensics and incident response have seen significant growth over the last decade due to the increasing threats faced by organizations and the continued reliance on digital platforms and devices by criminals. In the past, digital investigations were performed manually by expert investigators, but this approach has become no longer viable given the amount of data that must be processed compared to the relatively small number of trained investigators. These resource constraints have led to the development and reliance on automated processing and analysis systems for digital evidence. In this paper, we present our effort to develop …

The Effects Of Temperature On The Yields Of Aliphatic And Aromatic Products From The Supercritical Pyrolysis Of 1-Octene, Elizabeth Anne Hurst

LSU Doctoral Dissertations

Prior to their combustion, fuels for future high-speed aircraft are expected to experience supercritical conditions, leading to the production of polycyclic aromatic hydrocarbons (PAH), precursors to solid carbonaceous deposits, via pyrolytic reactions. These solid deposits can clog fuel-transfer lines, causing unsafe aircraft operation. To prevent the formation of fuel-line deposits, it is critical to understand the reaction pathways that lead to PAH formation in the supercritical fuel pyrolysis environment.

To better understand the role of large 1-alkenes in PAH formation, supercritical pyrolysis experiments with model fuel 1-octene, a representative 1-alkene product from supercritical n-alkane pyrolysis, have been performed. The …

Bio-Mechanical Characterization Of Adherent Cell Layers With A Pdms Cantilever, Merrel Truly Holley

LSU Doctoral Dissertations

In the last few decades, the mechanical characteristics of human cells has been linked to many physiological processes and pathological conditions, illustrating the importance as effective biomarkers. Mounting research has shown the mechanical force between cells and the extracellular matrix (ECM) plays a vital role in cellular processes such as tissue homeostasis, wound healing, cancer metastasis, and the progression of various diseases. This mechanical force, or the force that a cell produces on its surroundings, is termed as the cellular traction force (CTF). Precise characterization of the CTF can expand our knowledge of these important cellular processes as well as …

Shortest Path Calculation Using Contraction Hierarchy Graph Algorithms On Nvidia Gpus, Roozbeh Karimi

LSU Doctoral Dissertations

PHAST is to date one of the fastest algorithms for performing single source shortest path (SSSP) queries on road-network graphs. PHAST operates on graphs produced in part using Geisberger's contraction hierarchy (CH) algorithm. Producing these graphs is time consuming, limiting PHAST's usefulness when graphs are not available in advance. CH iteratively assigns scores to nodes, contracts (removes) the highest-scoring node, and adds shortcut edges to preserve distances. Iteration stops when only one node remains. Scoring and contraction rely on a witness path search (WPS) of nearby nodes. Little work has been reported on parallel and especially GPU CH algorithms. This …

Evaluation Of The Rheological Behaviors And Molecular Composition Properties Of Crumb Rubber Modified Emulsion For Chip Seal, Md Tanvir Ahmed Sarkar

LSU Master's Theses

An experimental study was conducted to characterize the chemical, molecular, and rheological properties of different asphalt emulsions including a newly introduced tire rubber modified asphalt emulsion. One tire rubber modified asphalt emulsion (CRS-2TR), two conventional emulsions (CRS-2 and CRS-2P), and one asphalt rubber binder (AC20-5TR) were evaluated. The differences in functional groups, chemical composition, and molecular weight distribution of the asphalt binder and emulsions under different aging conditions (Original, RTFO-aged, and PAV-aged) were evaluated by the Saturates, Aromatics, Resins and Asphaltenes (SARA) fractionation test, High-Pressure Gel Permeation Chromatography (HP-GPC), and Fourier Transform Infrared Spectroscopy (FTIR) test, respectively. Superpave Performance Grade …

Combined Molecular Dynamics And Phase Field Simulation Of Crystal Melt Interfacial Properties And Microstructure Evolution During Rapid Solidification Of Ti-Ni Alloys, Sepideh Kavousi

LSU Doctoral Dissertations

Phase field method has become a popular tool to investigate the microstructure evolution during the solidification. Quantitative predictions using this method is still limited, and in this dissertation, we try to study this problem from different perspectives.

Most of the phase field models consider the solid-liquid interface to be in local equilibrium. Solidification during some manufacturing processes like selective laser melting, and electron beam additive manufacturing is rapid and far from equilibrium which can result in supersaturated solid solutions, segregation-free crystals, or metastable phases. Before obtaining any conclusions from the phase field simulations, we must know the answer for “which …

An Investigation Of High-Speed Consolidation And Repair Of Carbon Fiber - Epoxy Composites Through Ultrasonic Welding, David A. Hoskins

LSU Master's Theses

Adhesive repair of carbon fiber composite structures is commonly done on damaged structures to extend the service life. This method requires careful preparation of the damaged surface with intricate steps to ensure good bonding between the repair patch and the parent structure by means of an adhesive film. As with many forms of composite manufacturing, it is required to perform vacuum bagging, debulking, and a heated cure depending on the resin. All these steps make the repair process costly and time consuming.

In this present work, an alternative method of repair is investigated which explores the experimental feasibility of using …

Thermal-Kinect Fusion Scanning System For Bodyshape Inpainting And Estimation Under Clothing, Sirazum Munira Tisha

LSU Master's Theses

In today's interactive world 3D body scanning is necessary in the field of making virtual avatar, apparel industry, physical health assessment and so on. 3D scanners that are used in this process are very costly and also requires subject to be nearly naked or wear a special tight fitting cloths. A cost effective 3D body scanning system which can estimate body parameters under clothing will be the best solution in this regard. In our experiment we build such a body scanning system by fusing Kinect depth sensor and a Thermal camera. Kinect can sense the depth of the subject and …

On I/O Performance And Cost Efficiency Of Cloud Storage: A Client's Perspective, Binbing Hou

LSU Doctoral Dissertations

Cloud storage has gained increasing popularity in the past few years. In cloud storage, data are stored in the service provider’s data centers; users access data via the network and pay the fees based on the service usage. For such a new storage model, our prior wisdom and optimization schemes on conventional storage may not remain valid nor applicable to the emerging cloud storage.

In this dissertation, we focus on understanding and optimizing the I/O performance and cost efficiency of cloud storage from a client’s perspective. We first conduct a comprehensive study to gain insight into the I/O performance behaviors …

5-Bit Dual-Slope Analog-To-Digital Converter-Based Time-To-Digital Converter Chip Design In Cmos Technology, Jojoe S. Sagoe

LSU Master's Theses

Time-to-Digital Converters (TDC) have gained increasing importance in modern implementations of mixed-signal, data-acquisition and processing interfaces and are used to perform high precision time intervals in systems that incorporate Time-of-Flight (ToF) or Time-of-Arrival (ToA) measurements. The linearity of TDCs is very crucial since most Digital Signal Processing (DSP) systems require very linear inputs to achieve high accuracy.

In this work, a TDC has been designed in the 0.5 μm n-well CMOS process that can be used for on-chip integration and in applications requiring high linearity. This TDC used a Dual-Slope-ADC-based architecture for the time-to-digital conversion and consists of the following …

Review Of Naturally Occurring Ammonia In Groundwater And Its Effect On Using Chloramines For Drinking Water Disinfection In Louisiana, Athena Lindsay

Honors Theses

No abstract provided.

The Ability Of Β-Hairpin Peptides To Function As Degradation-Resistant, Cell-Penetrating Peptides And Their Potential As Proteolysis Targeted Chimeras, Jeffery C. Anderson

Honors Theses

No abstract provided.

Investigations Of Thermal Treatment Of Softwood Kraft Lignin Under Fractional And Ablative Pyrolytic Conditions, Dideolu J. Daniel

LSU Master's Theses

Lignin is second to cellulose in abundance among polymers in nature. Research studies on the development of new products and material combinations in which lignin degradation/conversion products are involved are still in their infancy, because fundamental knowledge about its structure, reactivity, and material and polymer behavior, is still lacking.

The objective of this research study was to investigate the complex thermal deconstruction and mechanistic behavior of a type of technical lignin, known as Kraft lignin, under depolymerization and to develop operating conditions for parameters influencing resulting product yields and operation of pyrolysis reactors.

Softwood Kraft lignin (s-KL) and methanol-fractionated (ex-KL) …

Factors Influencing Retirement Decision Making For Louisiana State Government Employees, Osama A. Amous

LSU Doctoral Dissertations

ABSTRACT

Public pension members continually face factors affecting their decision to retire in the changing American society. Workers are living longer and need more medical care with better retirement benefits. For Louisiana public employees specifically, no prior studies have examined the factors affecting workers’ decision to retire nor evaluated the factors impacting workers’ decision.

This multiphase study aimed to identify factors and evaluate the decision-making process that enables Louisianans to retire happily and satisfied with a guaranteed income, and to examine millennials’ decision-making process. In the initial phase, ten active and retired male and female participants answered questions in-person, leading …

Unidirectional And Nonreciprocal Nanophotonic Devices Based On Graphene And Magneto-Optical Materials, Vahid Foroughi Nezhad

LSU Doctoral Dissertations

In this dissertation, we first introduce compact tunable spatial mode converters for graphene parallel plate (GPP) waveguides. The converters are reciprocal and based on spatial modulation of graphene’s conductivity. The wavelength of operation of the mode converters is tunable in the mid-infrared wavelength range by adjusting the chemical potential of a strip on one of the graphene layers of the GPP waveguides. We also introduce optical diodes for GPP waveguides based on a spatial mode converter and a coupler, which consists of a single layer of graphene placed in the middle between the two plates of two GPP waveguides. \par …

Vanadium-Based Nanomaterials For Improved Zn Ion Storage, Jianwei Lai

LSU Master's Theses

Rechargeable aqueous zinc-ion batteries (ZIBs) have been intensively studied as novel promising large-scale energy storage systems recently, owing to their advantages of high abundance, cost effectiveness, and high safety. However, the development of suitable cathode materials with superior performance are severely hampered by the sluggish kinetics of Zn²⁺ with divalent charge in the host structure.

Our Work demonstrates boosting the electrochemical performances of nanostructured cathode materials for aqueous ZIBs. The first project is focused on the interlayer-expanded V₆O₁₃∙nH₂O nanosheets as promising cathodes. Benefiting from the synthetic merits of its favorable architecture and expanded …

Relating Individual Characteristics And Task Complexity To Performance Effectiveness In Individual And Collaborative Problem Solving, Kaveh Sheikhrezaei

LSU Doctoral Dissertations

The objective of this research is to examine the variables that influence performance effectiveness on individual and collaborative problem solving. The last few years have seen renewed interest in how team member personal characteristics and team composition characteristics impact team effectiveness.

Even with a growing quantity of organizations performing jobs by using groups, little is understood how people included in a team impact intragroup interaction and results. Most research investigates group’s performance based on a single characteristic which causes much confusion and contradictory results of the variables that impact overall group performance. Most research typically does not analyze the composition …

Exploring Occupant Behavioral Intentions In Immersive Virtual Environment To Enhance The Design And Engineering Of Sustainable Buildings, Sanaz Saeidi

LSU Doctoral Dissertations

Accurately simulating occupant behavior is essential to improve our understanding about the future energy performance of the buildings. To date, most of the information related to the occupancy behaviors has been gathered through field observations and/or performing experiments within the lab environments. Even though these common data collection methods are effective and reliable for the existing buildings, using such data to project occupant behaviors in other contexts is likely to lead to uncertainties. The most significant theoretical achievement of this dissertation was to provide the future building occupants with thermal experience of non-physically existent environments. In this dissertation occupant behavior …

Investigation Of Subsurface Stratigraphy And Groundwater Dynamics In The Mississippi River Delta, An Li

LSU Doctoral Dissertations

The Mississippi River Delta (MRD) is socioeconomically important to the state of Louisiana and the United States. Various types of land-water system data have been collected in the MRD. However, very few efforts have been made to utilize these datasets in modeling regional stratigraphy and groundwater dynamics in the MRD, especially for the upper 50 m of the depth. In this interval of depth, the Mississippi River and surrounding interdistributary bays intensively interact with the groundwater system. The lack of knowledge in regional stratigraphy and groundwater dynamics hinder an understanding of how hydrogeological setting affects processes such as surface-groundwater interaction, …

Effect Of Light Activated Self-Healing Polymers On The Performance Of Asphalt Pavement Containing Recycled Asphalt Materials (Rap/Ras), Sharareh Shirzad

LSU Doctoral Dissertations

A new generation of Ultraviolet (UV) light-induced self-healing polymers was introduced for the asphalt pavement application with the aim to enhance pavements durability while increasing its service life. The developed self-healing polymer was mixed with asphalt binder using two different methods, passive and reactive. For the passive method, the cured self-healing polymer was ground to smaller particle size and then it was mixed with asphalt binder using a high shear stirrer and at a high temperature. For the reactive method, self-healing polyurethane pre-polymer was added to the asphalt binder at a lower temperature and lower shear rate compare to the …

A Hybrid Kinematic-Acoustic System For Automated Activity Detection Of Construction Equipment, Yong-Cheol Lee

Faculty Publications

Automatically recognizing and tracking construction equipment activities is the first step towards performance monitoring of a job site. Recognizing equipment activities helps construction managers to detect the equipment downtime/idle time in a real-time framework, estimate the productivity rate of each equipment based on its progress, and efficiently evaluate the cycle time of each activity. Thus, it leads to project cost reduction and time schedule improvement. Previous studies on this topic have been based on single sources of data (e.g., kinematic, audio, video signals) for automated activity-detection purposes. However, relying on only one source of data is not appropriate, as the …

Synthesis Of Samarium-Based Metal Organic Compound Nanoparticles With Polychromatic-Photoluminescence For Bio-Tissue Fluorescence Imaging, Jian Xu

Faculty Publications

The development of nanomaterials with special optical window is critical for clinical applications and the optoelectronic industry. In this work, eight kinds of samarium-based metal organic compound nanoparticles (Sm-Fe, Sm-Ga, Sm-Mn, Sm-Na, Sm-Nb, Sm-W, Sm-Cu, and Sm-Al) were synthesized through a solution method. They show polychromatic-photoluminescence spectra extended from the UV to near-infrared (NIR) region when excited by 280 nm, 380 nm, 480 nm, 580 nm, and 785 nm light. They emit direct white light with respect to UV excitation. Tunable white-to-green fluorescence can be achieved by variation of excitation light around 300-400 nm. When they are excited by a …

Reduction Of Structural Damage From The Thermal Expansion Of Concrete Using Multifunctional Materials, Darren Hartl, Mirmilad Mirsayar

Publications

This study leveraged past successes in the analysis and design of shape memory alloy (SMA) components to address the issue of thermal expansion in concrete structures. Since the SMA used in the current work is relatively cheaper than other common SMAs (less than $50/lb compared to NiTi which is $200/lb due to difficulties in processing), it is anticipated that the findings of the study could be implemented in real infrastructures made of concrete, asphalt concrete, and other complex large infrastructure. Low-cost Fe-SMAs and other multifunctional materials can be considered as a replacement for components made of steel (e.g., in reinforced …

The Impact Of Hurricane Harvey On Pavement Structures In The South East Texas And South West Louisiana, Stefan Romanoschi

Publications

This study developed a methodology to estimate the damage caused by flooding, such that caused by Hurricane Harvey, on a road or street network. The flooded street or pavement sections are identified using GIS flood maps with street GIS maps used for pavement management systems (PMS) by cities or state authorities. Then the damage caused by flooding directly through the increase moisture in foundation layers or indirectly due to the increase heavy traffic during the relief effort is estimated. An example Excel macro was created to illustrate the estimation process. The methodology estimates the increase in rehabilitation costs since the …