Engineering Commons^™

Vu Villa Structural Design And Rehabilitation, Kolby Sukut

Graduate Theses & Non-Theses

The Vu Villa is a bar and pizzeria which has operated out of the first floor of the Campana building in Butte, Montana since 1967. Construction of the Campana building started in 1894 and was completed before the end of the 19^th century. The Campana building is a two-story building which primarily consists of exterior brick masonry walls and wood framing on the interior. Within the last several decades significant sag has been identified in the second-floor of the building as well as an adjacent staircase. In addition, renovation activities have been discussed for the upstairs which would involve …

Polyurethane-Carbon Microfiber Composite Coating For Electrical Heating Of Concrete Pavement Surfaces, Alireza Sassani, Ali Arabzadeh, Halil Ceylan, Sunghwan Kim, Kasthurirangan Gopalakrishnan, Peter C. Taylor, Ali Nahvi

Ali Nahvi

Electrically-heated pavements have attracted attention as alternatives to the traditional ice/snow removal practices. Electrically conductive polymer-carbon composite coatings provide promising properties for this application. Based on the concept of joule heating, the conductive composite can be utilized as a resistor that generates heat by electric current and increases the surface temperature to melt the ice and snow on the pavement surface. This research investigates the feasibility of applying an electrically conductive composite coating made with a Polyurethane (PU) binder and micrometer-scale carbon fiber (CMF) filler as the electrical heating materials on the surface of Portland cement concrete (PCC) pavements. PU-CMF …

Energy Dissipating Connector For Precast Shear Walls In High-Seismic Areas, Mohammed Aljuboori

Theses and Dissertations

ABSTRACT

ENERGY DISSIPATING CONNECTOR FOR PRECAST SHEAR WALLS IN HIGH-SEISMIC AREAS

By

Mohammed Aljuboori

The University of Wisconsin – Milwaukee, 2019

Under the Supervision of Dr. Habib Tabatabai

Precast concrete systems are widely used in a variety of structures such as parking garages, residential units, shopping centers, and transportation stations. In some cases, precast structures are preferred over conventional cast-in-place (CIP) concrete conventional structures because of ease of construction, rapid implementation, and lower levels of energy consumption. One area where precast systems have traditionally been at a disadvantage is high seismic applications. In seismic regions, precast concrete structures must have …

The Influence Of Citric Acid On Setting Time And Temperature Behavior Of Calcium Sulfoaluminate-Belite Cement, Edgar Soriano

Civil Engineering Undergraduate Honors Theses

Today the need to opt for alternative cementitious materials is growing due to environmental reasons and construction time frames that portland cement cannot always satisfy. Calcium Sulfoaluminate (CSA) cements are a strong candidate to supplement or replace portland cement in the construction field for certain applications. In the United States, CSA cement has been limited mostly to pavement repairs because of its rapid initial setting time. The chemical compound responsible for this phenomenon is the alumina. This compound and sulfate are present in larger proportions compared to portland cement. The purpose of this research is to study how the use …

Appalachian Electric Cooperative Zinc Substation Foundation Project, Leah Stephens, James Throckmorton, Grayson Layne, Ben Morris

Chancellor’s Honors Program Projects

No abstract provided.

Optimizing The Performance Of Complex Engineering Systems Aided By Artificial Neural Networks, Khalil Qatu

Electronic Theses and Dissertations

In the first problem Polyetherimide graphene nanoplatelets papers (PEIGNP) were tested with different graphene loadings varying from 0-97 weight percent (WT%). The resulting stress-strain curves were utilized to develop two ANN models. Stress-controlled and strain-controlled models. Both models shoan excellent correlation to the experimental. Several Mechanical properties were calculated from the predicted stress-strain curves namely; toughness maximum strength maximum strain and maximum tangent modulus. Both models captured the same overall behavior of the PEIGNP composite. However the strain-controlled model was found to predict lower stress than the stress-controlled model. Finally a Graphical User Interface (GUI) was developed to aid in …

Stabilization Of Dredged Materials In Ohio: An Investigation Of Mechanical, Chemical And Biological Dewatering Techniques, Erika Howard

Williams Honors College, Honors Research Projects

Each year, materials are excavated from oceans and lakes in order to keep the waterways open so that ships can safely pass through. These excavated, or dredged, materials are then discarded, usually being returned to the body of water from which they were removed. Beginning in 2020, the Ohio Environmental Protection Agency (OEPA) will no longer allow this to occur. Therefore, the purpose of this project is to investigate beneficial uses for dredged materials in Lake Erie, and to address the best management practices for dewatering these materials, as set forth in the Lake Erie Protection and Restoration Plan created …