Engineering Commons^™

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

A Generalizable Method And Case Application For Development And Use Of The Aviation Systems – Trust Survey (As-Ts)., Jamison Hicks

Theses and Dissertations

Automated systems are integral in the development of modern aircraft, especially for complex military aircraft. Pilot Trust in Automation (TIA) in these systems is vital for optimizing the pilot-vehicle interface and ensuring pilots use the systems appropriately to complete required tasks.

The objective of this research was to develop and validate a TIA scale and survey methodology to identify and mitigate trust deficiencies with automated systems for use in Army Aviation testing. There is currently no standard TIA assessment methodology for U.S. Army aviation pilots that identifies trust deficiencies and potential mitigations.

A comprehensive literature review was conducted to identify …

Productivity And Quality Evaluation In Assembly Using Collaborative Robots, Carlos F. Manzanares Vega

Open Access Theses & Dissertations

In Industry 4.0, various technologies have been applied to achieve automation for traditional manufacturing and practices. For this reason, Smart Manufacturing (SM) environments utilize collaborative robots for process optimization by integrating the Internet of Things (IoT). Cobots are equipped with sensors and/or other devices to be able to transmit data in real-time while performing their tasks. Consequently, such SM implementations improves the decision making and business development, such as supply chain and operations, by sharing real-time data from a plant operational level. The collaborative robots are also designed to safely interact and collaborate with humans to perform tasks and optimize …

Eagle Medical Tray Denesting & Debris Removal Process, Nicholas Allen Ungefug, Noah Chavez, Susana Shu-Lin Okhuysen, Michael Augustine Pennington

Industrial and Manufacturing Engineering

Eagle Medical Incorporated is a contract medical device packaging and sterilization company. The company purchases thermoformed medical packaging trays, which maintain the sterility of medical devices, from various manufacturers. To ensure packaging quality and to prevent cleanroom contamination, Eagle Medical inspects and sterilizes each blister tray that they order. This process is an essential non-value-added activity that creates a bottleneck. Cleanroom employees must stop packaging medical devices and attend to the processing of blister trays and packaging solutions. The blister trays arrive at Eagle’s facility in nested stacks. Vibration and movement during shipping further compresses the stacks, which makes separation …

Effect Of Automation Level On Cognitive Workload When Collaborating With A Robotic Assistant, Mitchell A. Champagne

LSU Master's Theses

Manufacturing robotics have been used for decades to perform repetitive tasks, or tasks that require increased levels of speed, strength, or precision to meet production and specification requirements. Determining the appropriate degree of automation for both the human and robot collaborative team members is critical to optimize production as well as user experience. If the degree of automation is too high, the human will be out of the loop which can result in the loss of situational awareness and be detrimental to intervention time and accuracy. If the degree of automation is too low, then the human may experience greater …

Experimental Comparison Of Load Sharing Techniques For Fast Motion In Industrial Machines, Eike Marten Hillrichs

Theses and Dissertations

Load sharing and synchronization techniques are essential for modern automation applications where single motor systems cannot meet the application requirements. Evenly sharing the load between multiple motors can increase the output of processes and reduce maintenance efforts due to uneven wear and tear. Rockwell Automation has developed two load sharing techniques for fast motion control applications. In this Thesis, the two load sharing techniques are experimentally compared regarding their ability to evenly share loads and control synchronized motions in a multi motor setup for fast motion. The techniques are compared using a setup with two motors coupled by a timing …

Chemical Clean Automated Loader, Jordyn Bryner

Williams Honors College, Honors Research Projects

TTM Technologies (TTM) is a global printed circuit board (PCB) manufacturer. The work described in this report was completed in the TTM North Jackson, Ohio location. This plant focuses primarily on the manufacturing of rigid and rigid-flex PCBs for the aerospace and defense industry. TTM North Jackson has an ongoing labor dependency issue due to the shortage of workers the nation is facing. To solve this problem, TTM has focused the efforts of their new engineers and interns on automating processes that are labor dependent. The goal is to provide design guidance to be used later by TTM to automate …

Rinse Tank Salinity Automation, George Pahoundis

Williams Honors College, Honors Research Projects

Manufacturing processes are often consisted of many different processes and sub-processes. Each of these carries its own level of importance and impact to the overall picture. In this particular sub-process, salt is rinsed from a product via a rinse tank: a tank whose salinity may not exceed a certain level and whose temperature must not fall below a certain level. This setting is a prime opportunity to implement an automated control system to allow these parameters to be met with upmost efficiency. With potential savings in excess of $20,000 per year and an estimated payback period of 8 weeks, the …

Development And Initial Evaluation Of A Reinforced Cue Detection Model To Assess Situation Awareness In Commercial Aircraft Cockpits, Aysen K. Taylor

Engineering Management & Systems Engineering Theses & Dissertations

Commercial transport aircraft of today vary greatly from early aircraft with regards to how the aircraft are controlled and the feedback provided from the machine to the human operator. Over time, as avionics systems became more automated, pilots had less direct control over their aircraft. Much research exists in the literature about automation issues, and several major accidents over the last twenty years spurred interest about how to maintain the benefits of automation while improving the overall human-machine interaction as the pilot is considered the last line of defense.

An important reason for maintaining or even improving overall pilot situation …

Collaborative Robotic Path Planning For Industrial Spraying Operations On Complex Geometries, Steven Brown

Graduate Theses and Dissertations

Implementation of automated robotic solutions for complex tasks currently faces a few major hurdles. For instance, lack of effective sensing and task variability – especially in high-mix/low-volume processes – creates too much uncertainty to reliably hard-code a robotic work cell. Current collaborative frameworks generally focus on integrating the sensing required for a physically collaborative implementation. While this paradigm has proven effective for mitigating uncertainty by mixing human cognitive function and fine motor skills with robotic strength and repeatability, there are many instances where physical interaction is impractical but human reasoning and task knowledge is still needed. The proposed framework consists …

Design Of Experiments-Based Scara Robot Parameter Evaluation For Embedding Electronics Into 3d Print, Sreekara Charith Boppana

Open Access Theses & Dissertations

Additive manufacturing processes combined with enhanced technologies for electronics production enables a highly flexible manufacturing of personalized 3D electronic devices. Due to the enormous progress within the last years, these technologies made their way from prototyping towards manufacturing. The growing request for products manufactured in batch size, making use of a robot to incorporate the electronic components necessary to make functional 3-Dimensional-Structural Electronics will extend the mass production possibilities. There is significant interest in automation of a process is which parameters are influential in the occurrence of assembly defects and which adjustments should be made to those variables to reduce …

Economic Analysis And Justification For Automated Welding Systems, Roxanne Raye

Industrial and Manufacturing Engineering

This report looks at designing a new welding process for a company in the Oil & Gas industry, ensuring method consistency and performance quality of their steel drill bit while increasing overall production. The current product is welded manually with a flux core wire, resulting in high cycle times and numerous cases of required rework.

The use of automation systems will be analyzed for their increased consistency, quality, safety, and production estimates. Specifically robotic cell design will be considered, since it can work on more parts with fewer operators, adding efficiency and flexibility to the production floor. Other areas of …

Semi-Automated Glass Mat Splice Operation For Asphalt Shingle Line, Justin Bracci, Harry Zhao, Chad Linafelter

Mechanical Engineering

The following report details the senior project sponsored by GAF Materials Corporation, Shafter, CA in regards to semi-automating a glass-mat splicing table for asphalt roofing shingle production. Herein includes details, research, design, and analysis regarding the semi-automation of the gluing processes for the splicing table. A working prototype was manufactured and tested for the future implementation onto GAF’s production line or further senior project involvement.

Automation Of Pillow Speaker Button Testing To Avoid Repetitive Strain Injuries In Testing Technicians, Tyler P. Finnegan

Industrial and Manufacturing Engineering

Abstract Anacom MedTek, a medical device company, produces pillow speakers as their main product line. Pillow speakers are a healthcare communications tool that allow for hospital patients to control many entertainment and environmental components of the hospital room from one controller. These pillow speaker devices have anywhere from 3 to 27 metal dome key cap buttons based on their customization. Before they can be shipped to a customer, each button must be tested to ensure that it is functioning properly. This test is currently done manually by a testing technician. With so many buttons to be tested for each unit …

Task Analysis, Modeling, And Automatic Identification Of Elemental Tasks In Robot-Assisted Laparoscopic Surgery, Lavie Pinchas Golenberg

Wayne State University Dissertations

Robotic microsurgery provides many advantages for surgical operations, including tremor filtration, an increase in dexterity, and smaller incisions. There is a growing need for a task analyses on robotic laparoscopic operations to understand better the tasks involved in robotic microsurgery cases. A few research groups have conducted task observations to help systems automatically identify surgeon skill based on task execution. Their gesture analyses, however, lacked depth and their class libraries were composed of ambiguous groupings of gestures that did not share contextual similarities.

A Hierarchical Task Analysis was performed on a four-throw suturing task using a robotic microsurgical platform. Three …

A Multivariate Quality Control Approach For Automated Manufacturing Systems, Hisham Naim Ashur

Engineering Management & Systems Engineering Theses & Dissertations

In today's competitive manufacturing environment, effective and practical statistical quality control approaches are essential. A successful process control approach needs to provide on line real time monitoring of quality related characteristics.

No longer acceptable is an approach that analyzes quality related data only after the product is produced. A statistical process control approach that monitors the process during production and that reports trouble spots before bad products are made is necessary in an automated manufacturing environment.

An automated manufacturing environment is characterized by high volume production runs and short production cycles. Traditional statistical process control approaches are not capable of …