Engineering Commons^™

Gene Synthesis, Cloning, Expression, Purification And Biophysical Characterization Of The C2 Domain Of Human Tensin, Kiran Sukumar Gajula

Doctoral Dissertations

Tensin is a large "docking" protein found in the adhesive junctions of animal cells and recruited early in the development of cell-substrate contacts. There it binds to the cytoplasmic domain of integrin β1 and caps the barbed ends of filamentous actin. This forms a rational basis for its implication in a direct role in the mechanics of membrane-cytoskeleton interactions. Tensin provides a physical link between the actin cytoskeleton, integrins, and other proteins at the cell-substrate contacts. Its overall biochemical properties are a function of its domain composition and architecture, i.e., the domains that are present and their relative positions in …

Structural And Economical Impacts Of Heavy Truck Loads On Bridges, Xiang Zhou

Doctoral Dissertations

The study included in this dissertation assesses the strength, serviceability, and economic impact of overweight trucks on Louisiana bridges. Truck load configurations FHWA 3S2 and FHWA 3S3 were applied to bridge models that were originally designed for HS20-44 truck configuration to determine the effects of heavy truck loads on bridges. Behaviors of bridge components including bridge girder, deck, and diaphragm were evaluated separately.

AASHTO linear approach and finite element analysis were employed to evaluate bridge girder behaviors under the heavy truck load. Bridge models with different geometric configurations were considered. Both short term and long term effects on simple span …

Simulation And Fabrication Of Three Novel Micromechanical Sensors, Yanqing Lu

Doctoral Dissertations

This work focuses on the simulation, fabrication and characterization of novel microdevices for chemical and biological sensors for improved sensitivity, enhanced performance and applicability. Specifically, microbridge and microcoil sensors have been fabricated via advanced microfabrication technologies. Due to the potential application in chemical and biological sensing, the growth of gold and platinum nanowires during an electrolysis process have also been investigated.

A microbridge can be considered as the head-to-head fusion of two cantilevers and the middle of the bridge would deform in a way similar to a microcantilever. The microbridge sensing device is more stable than the microcantilever, especially in …

Study Of Interaction Between Indium Species And Dna In The Formation Of Dna -Templated Nanowires, Shivashankar Suryanarayanan

Doctoral Dissertations

A primary goal of semiconductor industry is to improve device performance and capability by downscaling feature size and upscaling packaging density. As optical-lithography, the mainstream technology for microfabrication, is being stretched to its limit, new unconventional fabrication techniques are being explored as alternatives. A "Bottom-up" approach for manufacturing is emerging as an answer to limitations posed by the traditional "Top-down" approach. Nanowires, bearing the potential of being the basic building blocks for such an approach, are gaining tremendous attention in nanoelectronics. Metal nanowires fabricated using DNA as templates have potential for precise control of length, diameter and positioning. However, wires …

Design And Development Of Microcantilever As A Platform For Moisture Sensing, Qi Chen

Doctoral Dissertations

Ultra-sensitive and selective moisture sensors are needed in various industries for processing control or environmental monitoring. As an outstanding sensor platform, microcantilevers have potential application in moisture detection due to their advantages, such as low-level moisture detection limits, high accuracy, quick response time, high reproducibility, good recovery rate and low in cost. Our research results will lead to the first of its kind for the commercialization of a microcantilever-based moisture sensor used for industrial and household applications. The novelty of the present work is the development of SiO2 and Si cantilevers, which were fabricated using developed processes and modified with …

A Finite Difference Method For Studying Thermal Deformation In A Three-Dimensional Microsphere Exposed To Ultrashort-Pulsed Lasers, Xudong Du

Doctoral Dissertations

Ultrashort-pulsed lasers with pulse durations on the order of sub-picoseconds to femtoseconds possess the capabilities in limiting the undesirable spread of the thermal process zone in a heated sample which have been attracting worldwide interest in science and engineering. Success of ultrashort-pulsed lasers in real application relies on: (1) well characterized pulse width, intensity and experimental techniques; (2) reliable microscale heat transfer models; and (3) prevention of thermal damage. Laser damage by ultrashort-pulsed lasers occurs after the heating pulse is over since the pulse duration time is extremely short and the heat flux is essentially limited to the region within …

Development And Analysis Of An Internet Browsing Utilizing The Overscan Technique For Persons With Physical Disabilities, Patrick Paul Clerkin

Doctoral Dissertations

Persons with a severe disability often use scanning as an indirect selection technique for operating augmentative and alternative communication aids and computer access. For information that can be organized in advance, including lists of communication elements such as words and phrases, users often employ rate enhancing scanning methods like the row-column scanning technique. However, row-column scanning requires selection elements to be grouped into defined rows and columns, and therefore does not work well with Internet browsing due to the non-grouped layout of HTML pages.

This work attempts to develop an improved scanning technique for Internet browsing by designing interfaces to …

Polymer Light Emitting Diodes Based On Polyfluorenes, Quishu Zhang

Doctoral Dissertations

This dissertation is devoted to the study on Polymer Light-Emitting Diodes (PLEDs) based on polyfluorenes (PFs), a promising class of semiconductive polymers for Light-Emitting Diode (LED) applications. Recently Light Emitting Polymers (LEPs) have clearly made their entry into display technology by virtue of their potential application for large-area flat-panel displays with the advantages of low cost, wide viewing angle, fast switching time, high efficiency, low driving voltage, as well as their flexibility and adaptability. Compared to inorganic materials, the efficiency of PLEDs is, however, still low. And for the application of PFs in PLEDs, an undesired longwavelength emission band is …

Fabrication And Application Of Conducting Polymer Micro- And Nano-Patterns, Anirban Chakraborty

Doctoral Dissertations

Conducting polymers, since their discovery, have attracted significant attention due to their promise of replacing silicon and metals in building devices. They have been shown to have wide applications for biological and chemical sensing as well as for electronic devices. Previous and current efforts have concentrated on building devices of a specific function. When multiple micropatterns of different conducting polymers are fabricated on a common substrate, a versatile microsystem can be envisioned. The existing conducting polymer patterning techniques present some technical challenges of degradation, low throughput, low resolution, depth of field, and residual layer in producing conducting polymer microstructures. To …

Nonlinear Dynamical Analysis Of Brain Electrical Activity Due To Exposure To Weak Environmentally Relevant Electromagnetic Fields, Erik Alfonso Nilsen

Doctoral Dissertations

The reports dealing with the effects of weak electromagnetic fields (EMFs) on brain electrical activity have been inconsistent. We suspected that the use of linear models and their associated methods accounted for some of the variability, and we explored the issue by using a novel approach to study the effects of EMFs on the electroencephalogram (EEG) from rabbits and humans. The EEG was embedded in phase space and local recurrence plots were calculated and quantified to permit comparisons between exposed and control epochs from individual subjects. Statistically significant alterations in brain activity were observed in each subject when exposed to …

Computer Simulation And Human Experiment On The Laplacian Electrocardiogram (Ecg), Ting Chen

Doctoral Dissertations

The electrocardiogram (ECG) provides useful global temporal assessment of cardiac activity, but has limited spatial capabilities. Laplacian electrocardiogram (LECG) and body surface Laplacian mapping (BSLM), improvements over ECG provides high spatiotemporal distributed information about cardiac electrical activation.

This project was divided into two parts: computer simulation and human experiment. In the computer simulation, a comparison of the performance of the tripolar and bipolar as well as spline LECG and BSLMs for localizing and imaging the cardiac electrical activation has been investigated. A simple planar surface model and a simplified eccentric heart-torso sphere-cylinder homogeneous volume conductor model were developed. Multiple dipoles …

Rational Design And Investigation Of Polypeptide Multilayer Films And Capsules, Ling Zhang

Doctoral Dissertations

Three major concerns in the science of materials today are control over structure and function at the molecular level, biodegradability, and scalability of production. Polymeric materials, notably polyelectrolyte multilayer films, have shown considerable promise in all these areas, and for rational development of multifunctionality. Polypeptides constitute an especially interesting class of polyelectrolyte, given their inherent biodegradability, means of control over structure, methods of large-scale synthesis, and ability to encode biological information. Relatively little is known, however, about polypeptide multilayer films, despite recent advances in the general area.

In this dissertation, ten heteropolypeptides were designed and synthesized by Fmoc chemistry. These …

An Intermediate-Layer Lithography Method For Producing Metal Micron/Nano Patterns And Conducting Polymer-Based Microdevices, Xinchuan Liu

Doctoral Dissertations

Metals have been widely used in the areas of integration circuit (IC) and microelectromechanical systems (MEMS) fields as materials for gates, contact pads, interconnects, corrosion resistance coatings, rectifying contacts, redundancy memories, heating elements, mechanical parts, magnetic component, etc. due to their good properties, such as high electrical conductivity and good thermal conductivity. Conducting polymers, because of their promising potential to replace silicon and metals in building devices, have attracted great attention in recent decades.

Traditional photolithography methods are often used to pattern metals and conducting polymers. However, it cannot be used to fabricate nano patterns because the minimum feature size …

Uncertainty And Error In Laser Triangulation Measurements For Pipe Profiling, Michael Kenneth Swanbom

Doctoral Dissertations

Underground pipeline infrastructure often receives insufficient attention and maintenance. Those responsible for ensuring the continuing functionality of this infrastructure primarily use subjective information in their decision making, and standards defining the level of damage acceptable before repair or replacement are difficult to implement. Laser pipe profiling is a relatively new technology that has emerged to take a step toward the objective assessment of buried assets. A laser profiler is a device that traverses a section of pipe, taking measurements of radius around the circumference of the inner pipe wall at multiple locations along the length of the pipe. The accuracy …

Code-Level Modeling Of The Hodgkin -Huxley Neuron Model Using An Open Source Version Of Spice, Anthony Stuart Carver

Doctoral Dissertations

There have been numerous studies presented in the literature demonstrating proof of principle neural-electronic circuitry. Some of these studies involve simulations of neural detection using synthetic electronic circuitry, while others involve simulations of neural excitation using external electronics. A common feature of these studies is the simplicity of the overall circuit topology. Some of these studies implement the circuit equations in conventional numerical ordinary differential equation solvers. This process involves the algebraic manipulation of the circuit equations which is a tedious process for all but the simplest circuit topologies. As the overall complexity of the network topology increases, the numerical …

Growth And Behavior Of Chondrocytes On Nano Engineered Surfaces And Construction Of Micropatterned Co-Culture Platforms Using Layer-By-Layer Platforms Using Layer -By -Layer Assembly Lift-Off Method, Jameel Shaik

Doctoral Dissertations

Several approaches such as self-assembled monolayers and layer-by-layer assembled multilayer films are being used as tools to study the interactions of cells with biomaterials in vitro. In this study, the layer-by-layer assembly approach was used to create monolayer, bilayer, trilayer, five, ten and twenty-bilayer beds of eleven different biomaterials. The various biomaterials used were poly(styrene-sulfonate), fibronectin, poly-L-lysine, poly-D-lysine, laminin, bovine serum albumin, chondroitin sulfate, poly(ethyleneimine), polyethylene glycol amine, collagen and poly(dimethyldiallyl-ammonium chloride) with unmodified tissue-culture polystyrene as standard control. Three different cell lines—primary bovine articular chondrocytes, and two secondary cell lines, human chondrosarcoma cells and canine chondrocytes were used in …

A Finite Difference Method For Studying Thermal Deformation In Two-Dimensional Micro Scale Metal Thin Films Exposed To Ultrashort Pulsed Lasers, Haojie Wang

Doctoral Dissertations

Ultrashort-pulsed lasers have been attracting worldwide interest in science and engineering because the lasers with pulse durations on the order of sub-picoseconds to femtoseconds possess capabilities in limiting the undesirable spread of the thermal process zone in a heated sample during material processing at the microscale. Prevention of thermal damage is an important factor for success of ultrashort-pulsed lasers in real applications. The thermal damage induced by ultrashort pulses is intrinsically different from that induced by long-pulse or continuous lasers. It occurs after the heating pulse is over and involves the shattering of thin metal layers (without a clear signature …

Biomedical Applications Of Polypeptide Multilayer Nanofilms And Microcapsules, Jai Simha S. Rudra

Doctoral Dissertations

The past few years have witnessed considerable growth in synthetic polymer chemistry and physics, biomaterials science, and nano-scale engineering. Research on polypeptide multilayer films, coatings, and microcapsules is located at the intersection of these areas and are promising materials for applications in medicine, biotechnology, environmental science. Most envisioned applications of polypeptide multilayers have a biomedical bent. This dissertation on polypeptide multilayer film applications covers key points of polypeptides as materials, means of polymer production, film preparation, film characterization methods, and key points of current research in basic science. Both commercial and designed peptides have been used to fabricate films for …

Structural Behavior Of Pvc Pipe Liners Subjected To Seasonal Groundwater Loading, Qing Cai

Doctoral Dissertations

Thin-walled polymeric liners are routinely used to rehabilitate deteriorated underground pipe lines that are structurally sound but have lost their hydraulic integrity. These host pipes are said to be "partially deteriorated" since they can support soil and surface loading. For this case, the pipe liners must only be designed to withstand the pressure of the groundwater that seeps through openings in the host pipe and migrates through the small annular gap between the liner and the host pipe. This external pressure will cause the polymeric liner to slowly deform inward toward the center of the pipe, and the compressive hoop …

Position And Orientation Correction For Pipe Profiling Robots, Andrew John Dettmer

Doctoral Dissertations

Sewer pipelines are prevalent, important, valuable, unnoticed, and often in a state of disrepair. Pipeline inspection is essential for effective management of wastewater systems and is now mandated for many municipalities complying with the Governmental Accounting Standards Board Statement 34 and EPA regulations. Pipe inspection robots are routinely used to inspect underground pipelines for cracks, deformations, leaks, blockages and other anomalies to prevent catastrophic failure and to ensure cost effective maintenance and renewal. Most existing pipe inspection robots only collect video footage of pipe condition. Pipe profiling technology has recently been introduced to allow for measurement of the internal coordinate …

Understanding Standing, Christopher Storey

Doctoral Dissertations

Research objectives. Psychophysical acceleration threshold is a tool for detecting deficits in dynamic postural control. Our lab has shown differences in the acceleration threshold among young adults, elderly adults, and elderly adults with diabetes. Electromyography, Semmes-Weinstein monofilaments, and hearing tests investigate the underlying physiological mechanisms for the detriments in postural control. Due to peri-sway perturbations, the motion of a person's sway affects the signal to noise ratio for perturbed stance. Since increases in sway range accompany postural instabilities, sway entrainment will allow us to investigate changes in acceleration threshold at different points in sway. The center of pressure, observed …

The Design And Performance Of Pressure Pipe Liners Under Static And Cyclic Loading, Shanhai Guan

Doctoral Dissertations

Cured-in-place pipe (CIPP), is a widely used trenchless technology. Based on the current liner design method, American Society for Testing and Materials (ASTM) F2207-02, several aspects are studied for the effect on estimating the long-term performance of the liners.

While estimating the liner burst pressure, the effect from host pipe material properties, liner material properties, defect geometry, liner creep properties and loading condition should be considered. The burst pressure calculated based on the existing method is overestimated and this allows an increased risk of structural failure before the expected design life is reached.

Compared with cast-iron, a PVC host pipe …

Analysis And Prediction Of Effectiveness For Residential Hvac Ductwork, Jinson J. Erinjeri

Doctoral Dissertations

An analysis of residential HVAC ductwork has been performed. Ductwork in 55 homes in Northern Louisiana was tested to determine duct leakage by means of using various measurement techniques to determine the differences between the existing methods as well as the revised method developed in this project referred to as Generalized Subtraction Correction Algorithm (GSCA). A protocol to measure and estimate return leaks at operating pressure was developed. The weighted average return leakage for the homes sampled was determined to be 115 cfm at operating pressure whereas the weighted average duct leakage was determined to be 348 cfm at 25 …

Chitosan Paste From Crawfish Shells As A Synthetic Bone Graft Material: Preparation, Characterization And Animal Study, Jerome G. Saltarrelli Jr.

Doctoral Dissertations

Bone loss associated with musculoskeletal trauma or metabolic diseases often requires bone grafts. Autograft or allograft bones are limited in supply. Therefore, development of synthetic bone graft materials is an active area of research. For several years the biomaterials group at LSUHSC-Shreveport has been investigating the use of chitosan purified from crawfish shells using a process patented by my research advisor, Dr. Debi Mukherjee.

Chitin is a polysaccharide that exists in fungi, exoskeleton of insects and outer shell of crustaceans. It is biocompatible, osteoconductive, antimicrobial, biodegradable, non-toxic, haemostatic, fungicidal, and the second most abundant natural polysaccharide on earth. Removal of …

Drug Loading And Release From Polypeptide Multilayer Nanofilms, Yang Zhong

Doctoral Dissertations

Polypeptides, linear macromolecules, are formed from amino acid residues by linkage of peptide bonds. Proteins are polypeptides too, with more complex conformations contributing to specific functionalities. Disulfide bonds are very important to maintain the structure and functions of proteins, which will form between two cysteine (Cys) residues under oxidizing circumstance.

Cys containing polypeptides are designed and synthesized by F-moc (9-Fluorenylmethyloxycarbonyl) chemistry. The number and position of Cys residues can be controlled by amino acid sequences design and following peptide synthesis, which is important to gain insights on the nature of polyelectrolyte multilayer film assembly and stability.

Both commercial and designed …