Engineering Commons^™

Numerical Modeling Of Virus Transport Through Unsaturated Porous Media, Kandala Rajsekhar, Pramod Kumar Sharma, Sanjay K. Shukla

Research outputs 2014 to 2021

This paper describes the movement of virus in one-dimensional unsaturated porous media. The governing virus transport equations consider the inactivation in liquid phase, liquid–solid interface, air–liquid interface, and sorption in both liquid–solid and air–liquid interfaces. Finite-volume method has been used for solving the advection and dispersion processes of the virus transport equation. The effects of transport parameters on virus concentration profiles have been investigated for virus present in liquid phase, adsorbed liquid–solid and liquid–air phases. The results show that the movement of viruses in three phases is affected by soil moisture, inactivation rate, pore velocity, and mass transfer coefficients. It …

Exploring Civil Drone Accidents And Incidents To Help Prevent Potential Air Disasters, Graham Wild, John Murray, Glenn Baxter

Research outputs 2014 to 2021

A recent alleged “drone” collision with a British Airways Airbus A320 at Heathrow Airport highlighted the need to understand civil Remotely Piloted Aircraft Systems (RPAS) accidents and incidents (events). This understanding will facilitate improvements in safety by ensuring efforts are focused to reduce the greatest risks. One hundred and fifty two RPAS events were analyzed. The data was collected from a 10-year period (2006 to 2015). Results show that, in contrast to commercial air transportation (CAT), RPAS events have a significantly different distribution when categorized by occurrence type, phase of flight, and safety issue. Specifically, it was found that RPAS …

Detecting And Tracing Slow Attacks On Mobile Phone User Service, Brian Cusack, Zhuang Tian

Australian Digital Forensics Conference

The lower bandwidth of mobile devices has until recently filtered the range of attacks on the Internet. However, recent research shows that DOS and DDOS attacks, worms and viruses, and a whole range of social engineering attacks are impacting on broadband smartphone users. In our research we have developed a metric-based system to detect the traditional slow attacks that can be effective using limited resources, and then employed combinations of Internet trace back techniques to identify sources of attacks. Our research question asked: What defence mechanisms are effective? We critically evaluate the available literature to appraise the current state of …

The Proceedings Of 14th Australian Digital Forensics Conference, 5-6 December 2016, Edith Cowan University, Perth, Australia, Craig Valli

Australian Digital Forensics Conference

Conference Foreword

This is the fifth year that the Australian Digital Forensics Conference has been held under the banner of the Security Research Institute, which is in part due to the success of the security conference program at ECU. As with previous years, the conference continues to see a quality papers with a number from local and international authors. 11 papers were submitted and following a double blind peer review process, 8 were accepted for final presentation and publication. Conferences such as these are simply not possible without willing volunteers who follow through with the commitment they have initially made, …

Influence Of Neural Network Training Parameters On Short-Term Wind Forecasting, Adel Brka, Yasir M. Al-Abdeli, Ganesh Kothapalli

Research outputs 2014 to 2021

This paper investigates factors which can affect the accuracy of short-term wind speed prediction when done over long periods spanning different seasons. Two types of neural networks (NNs) are used to forecast power generated via specific horizontal axis wind turbines. Meteorological data used are for a specific Western Australian location. Results reveal that seasonal variations affect the prediction accuracy of the wind resource, but the magnitude of this influence strongly depends on the details of the NN deployed. Factors investigated include the span of the time series needed to initially train the networks, the temporal resolution of these data, the …

Ultra-Sustainable Fe78si9b13 Metallic Glass As A Catalyst For Activation Of Persulfate On Methylene Blue Degradation Under Uv-Vis Light, Zhe Jia, Xiaoguang Duan, Wenchang Zhang, Weimin Wang, Hongqi Sun, Shaobin Wang, Laichang Zhang

Research outputs 2014 to 2021

Stability and reusability are important characteristics of advanced catalysts for wastewater treatment. In this work, for the first time, sulfate radicals (SO4∙−) with a high oxidative potential (Eo = 2.5–3.1 V) were successfully activated from persulfate by a Fe78Si9B13 metallic glass. This alloy exhibited a superior surface stability and reusability while activating persulfate as indicated by it being used for 30 times while maintaining an acceptable methylene blue (MB) degradation rate. The produced SiO2 layer on the ribbon surface expanded strongly from the fresh use to the 20th use, providing stable protection of the buried Fe. MB degradation and kinetic …

A Rapid Co-Culture Stamping Device For Studying Intercellular Communication, Amin Hassanzadeh-Barforoushi, Jonathan Shemesh, Nona Farbehi, Mohsen Asadnia, Guan H. Yeoh, Richard P. Harvey, Robert E. Nordon, Majid E. Warkiani

Research outputs 2014 to 2021

Regulation of tissue development and repair depends on communication between neighbouring cells. Recent advances in cell micro-contact printing and microfluidics have facilitated the in-vitro study of homotypic and heterotypic cell-cell interaction. Nonetheless, these techniques are still complicated to perform and as a result, are seldom used by biologists. We report here development of a temporarily sealed microfluidic stamping device which utilizes a novel valve design for patterning two adherent cell lines with well-defined interlacing configurations to study cell-cell interactions. We demonstrate post-stamping cell viability of > 95%, the stamping of multiple adherent cell types, and the ability to control the seeded …

X-Ray Protection, Surface Chemistry And Rheology Of Ball-Milled Submicron Gd2o3 Aqueous Suspension, Ly B. T. La, Yee-Kwong Leong, Christopher Leatherday, Pek I. Au, Kevin Hayward, Laichang Zhang

Research outputs 2014 to 2021

X-ray protective garments are typically comprised of lead-based materials, which are toxic to both people and the environment. Developing alternative lightweight radiation shielding materials is a priority for protecting people working with radiation. Gadolinium, with an electron configuration typical of radiation shielding elements, is proposed as a non-toxic replacement for lead. This study provides new insights into the potential for a gadolinium suspension for replacing lead and proposes an inexpensive and effective preparation method. Submicron gadolinium oxide (Gd₂O₃) was generated using a cost effective ball milling method involving addition of NaCl. Then, the dispersed-flocculated behaviour of …

Photonic Microstructures For Energy-Generating Clear Glass And Net-Zero Energy Buildings, Mikhail Vasiliev, Ramzy Alghamedi, Mohammad Alam, Kamal Alameh

Research outputs 2014 to 2021

Transparent energy-harvesting windows are emerging as practical building-integrated photovoltaics (BIPV), capable of generating electricity while simultaneously reducing heating and cooling demands. By incorporating spectrally-selective diffraction gratings as light deflecting structures of high visible transparency into lamination interlayers and using improved spectrally-selective thin-film coatings, most of the visible solar radiation can be transmitted through the glass windows with minimum attenuation. At the same time, the ultraviolet (UV) and a part of incident solar infrared (IR) radiation energy are converted and/or deflected geometrically towards the panel edge for collection by CuInSe₂ solar cells. Experimental results show power conversion efficiencies in excess …

Developing Equations For Estimating Reference Evapotranspiration In Australia, Matin Ahooghalandari, Mehdi Khiadani, Mina Esmi Jahromi

Research outputs 2014 to 2021

Quantifying reference evapotranspiration (ET₀) is essential in water resources management. Although, many methods have been developed with different level of accuracy, in this study, two new equations were developed and optimized for estimating ET₀ using Honey-Bee Mating Optimization (HBMO) algorithm. The firs eq. estimates ET₀ from extraterrestrial radiation (R_a), relative humidity (RH) and mean daily temperature (T_mean), while the second uses the same parameters except that mean daily temperatures is replaced with maximum daily air temperature (T_max). Both equations were developed using climatic data from eight weather stations in Western …

Influence Of Nb On The Β → Α″ Martensitic Phase Transformation And Properties Of The Newly Designed Ti-Fe-Nb Alloys, Shima Ehtemam-Haghighi, Yujing Liu, Guanghui Cao, Lai-Chang Zhang

Research outputs 2014 to 2021

A series of Ti-7Fe-xNb (x = 0, 1, 4, 6, 9, 11 wt.%) alloys was designed and cast to investigate the β → α″ martensitic phase transformation, β phase stability, the resulting microstructure and mechanical properties. Phase analysis revealed that only Ti-7Fe-11Nb alloy shows a single body-centred cubic β phase microstructure while the others are comprised of β and orthorhombic α″ phases. Moreover, Nb addition up to 11 wt.% enhances the stability and volume fraction of β phase in the microstructure, hence reducing the propensity of the alloy system to form α″ phase during quenching. Compressive yield strength and hardness …

Processing Of Al-12si-Tnm Composites By Selective Laser Melting And Evaluation Of Compressive And Wear Properties, Konda Prashanth, Sergio Scudino, Anil Chaubey, Lukas Löber, Pei Wang, Hooyar Attar, Frank Schimansky, Florian Pyczak, Jürgen Eckert

Research outputs 2014 to 2021

Al-12Si (80 vol%)-Ti52.4Al42.2Nb4.4Mo0.9B0.06 (at.%) (TNM) composites were successfully produced by the selective laser melting (SLM). Detailed structural and microstructural analysis shows the formation of the Al6MoTi intermetallic phase due to the reaction of the TNM reinforcement with the Al-12Si matrix during SLM. Compression tests reveal that the composites exhibit significantly improved properties (∼140 and ∼160 MPa higher yield and ultimate compressive strengths, respectively) compared with the Al-12Si matrix. However, the samples break at ∼6% total strain under compression, thus showing a reduced plasticity of the composites. Sliding wear tests were carried out for both the Al-12Si matrix and the Al-12Si-TNM …

Techno-Economic Evaluation Of Solar Irrigation Plants Installed In Bangladesh, Najmul Hoque, Amit Roy, Mohd. Rafiqul A. Beg, B. K. Das

Research outputs 2014 to 2021

In the summer season, irrigation sector in Bangladesh suffers a lot due to the country wide electricity crisis. Solar pump offers a clean and simple alternative to the conventional fuel fired engine or grid electricity driven pump in this regard to resolve the issue. In this paper, the techno-economic analyses of solar irrigation plants installed in Bangladesh are evaluated. It was observed that systems were running around 70% to 80% of the rated power which was quite acceptable. A 10 hp pump was able to pump 600 liter of water per minute which was also satisfactory to irrigate the land. …

New Cost Model For Feasibility Analysis Of Utilising Special Purpose Machine Tools, Ana Vafadar, Majid Tolouei-Rad, Kevin Haywood

Research outputs 2014 to 2021

Special purpose machine tools (SPMs) have been widely used to perform drilling-related operations in high volume production including within automotive component industries. The first step in designing and manufacturing a SPM is a feasibility analysis. Since SPMs have relatively higher investment cost than other machine tools, this task must be performed before any investment on the preparation of detailed design. The present paper explores an economic feasibility analysis strategy which aims to make logical decision by assessing the strengths and limitations of an SPM in comparison with other machine tools. The mathematical product cost model for SPMs is proposed for …

The Heat Treatment Analysis Of E110 Case Hardening Steel, Majid Tolouei Rad, Eric Lichter

Research outputs 2014 to 2021

This paper investigates mechanical and microstructural behaviour of E110 case hardening steel when subjected to different heat treatment processes includingquenching, normalizing and tempering. After heat treatment samples were subjected to mechanical and metallographic analysisand the properties obtained from applying different processes were analysed. The heat treatment process had certain effects on the resultant properties andmicrostructures obtained for E110 steel which are described in details. Quenching produced a martensitic microstructure characterized by significant increase in material’s hardness and a significant decreased in its impact energy. Annealed specimens produced a coarse pearlitic microstructure with minimal variation in hardness and impact energy. For …

Proactive Biometric-Enabled Forensic Imprinting, Abdulrahman Alruban, Nathan L. Clarke, Fudong Li, Steven M. Furnell

Research outputs 2014 to 2021

Threats to enterprises have become widespread in the last decade. A major source of such threats originates from insiders who have legitimate access to the organization's internal systems and databases. Therefore, preventing or responding to such incidents has become a challenging task. Digital forensics has grown into a de-facto standard in the examination of electronic evidence; however, a key barrier is often being able to associate an individual to the stolen data. Stolen credentials and the Trojan defense are two commonly cited arguments used. This paper proposes a model that can more inextricably links the use of information (e.g. images, …

Floating Constructed Wetland For The Treatment Of Polluted River Water: A Pilot Scale Study On Seasonal Variation And Shock Load, Tanveer Saeed, Biprojit Paul, Rumana Afrin,, Abdullah Al-Muyeed, Guangzhi Sun

Research outputs 2014 to 2021

This paper reports the performance of a pilot scale floating constructed wetland (FCW), employed for the treatment of polluted water collected from Buriganga river in Bangladesh. The FCW system included a tank for accommodating collected water and a floating mat with media, to support the growth of two macrophyte species Phragmites australis and Canna indica. Mean mass removal rates of 0.66, 0.76, 0.08, 0.51, 2.49g/m2d were achieved for ammoniacal nitrogen (NH4-N), total inorganic nitrogen (TIN), phosphorus (P), biochemical oxygen demand (BOD), chemical oxygen demand (COD), respectively by the FCW. Nitrogen removal was via nitrification-denitrification processes, whereas filtration-sedimentation appeared to influence …

A Practical Anodic And Cathodic Curve Intersection Model To Understand Multiple Corrosion Potentials Of Fe-Based Glassy Alloys In Oh-Contained Solutions, Yingjie Li, Yonggang Wang, Bang An, Hui Xu, Yihua Liu, Laichang Zhang, Houyi Ma, Weimin Wang

Research outputs 2014 to 2021

A practical anodic and cathodic curve intersection model, which consisted of an apparent anodic curve and an imaginary cathodic line, was proposed to explain multiple corrosion potentials occurred in potentiodynamic polarization curves of Fe-based glassy alloys in alkaline solution. The apparent anodic curve was selected from the measured anodic curves. The imaginary cathodic line was obtained by linearly fitting the differences of anodic curves and can be moved evenly or rotated to predict the number and value of corrosion potentials. © 2016 Li et al. This is an open access article distributed under the terms of the Creative Commons Attribution …

Phase Transformation And Deformation Behavior Of Niti-Nb Eutectic Joined Niti Wires, Liqiang Wang, Cong Wang, Laichang Zhang, Liangyu Chen, Weijie Lu, Di Zhang

Research outputs 2014 to 2021

NiTi wires were brazed together via eutectic reaction between NiTi and Nb powder deposited at the wire contact region. Phase transformation and deformation behavior of the NiTi-Nb eutectic microstructure were investigated using transmission electron microscopy (TEM) and cyclic loading-unloading tests. Results show that R phase and B19′ martensite transformation are induced by plastic deformation. R phase transformation, which significantly contributes to superelasticity, preferentially occurs at the interfaces between NiTi and eutectic region. Round-shaped Nb-rich phase with rod-like and lamellar-type eutectics are observed in eutectic regions. These phases appear to affect the deformation behavior of the brazed NiTi-Nb region via five …

Technical Feasibility Analysis Of Utilizing Special Purpose Machine Tools, Ana Vafadar, Majid Tolouei Rad, Kevin Hayward, Kazem Abhary

Research outputs 2014 to 2021

Special purpose machine tools (SPMs) are primarily used for performing drilling-related operations and are widely used in mass production including automotive component manufacturing. Utilization of SPM is considerably widespread; however, this technology is relatively new and expensive. The important problems facing manufacturing industries wishing to utilize this technology is feasibility analysis to decide whether a SPM can be utilised for production of the given part and if it is feasible which SPM components would be appropriate. Since the cost of utilizing SPM is high, feasibility analysis must be performed before any investment on detailed design. This paper proposes a technical …

Equiaxed Ti-Based Composites With High Strength And Large Plasticity Prepared By Sintering And Crystallizing Amorphous Powder, Lehua Liu, Chao Yang, L. M. Kang, Yan Long, Zhiyu Xiao, Peijie Li, Laichang Zhang

Research outputs 2014 to 2021

High-performance titanium alloys with an equiaxed composite microstructure were achieved by sintering and crystallizing amorphous powder. By introducing a second phase in a β-Ti matrix, series of optimized Ti-Nb-Fe-Co-Al and Ti-Nb-Cu-Ni-Al composites, which have a microstructure composed of ultrafine-grained and equiaxed CoTi₂ or (Cu,Ni)Ti₂ precipitated phases surrounded by a ductile β-Ti matrix, were fabricated by sintering and crystallizing mechanically alloyed amorphous powder. The as-fabricated composites exhibit ultra-high ultimate compressive strength of 2585MPa and extremely large compressive plastic strain of around 40%, which are greater than the corresponding ones for most titanium alloys. In contrast, the alloy fabricated by …

Distinction In Corrosion Resistance Of Selective Laser Melted Ti-6al-4v Alloy On Different Planes, Nianwei Dai, Laichang Zhang, Junxi Zhang, Xin Zhang, Qingzhao Ni, Yang Chen

Research outputs 2014 to 2021

Electrochemical measurements and microstructural analysis were performed to study the corrosion resistance of different planes of Ti-6Al-4V alloy manufactured by selective laser melting (SLM). The electrochemical results suggest that its XY-plane possesses a better corrosion resistance compared to XZ-plane in 1 M HCl solution, in spite of slight difference in 3.5 wt.% NaCl solution, suggesting that the different planes exhibit more pronounced distinction in corrosion resistance in harsher solution system. The inferior corrosion resistance of XZ-plane is attributed to the presence of more α′ martensite and less β-Ti phase in microstructure for XZ-plane than for XY-plane of the SLM-produced Ti-6Al-4V …

Structural Geodesic-Tchebychev Transform: An Image Similarity Measure For Face Recognition, Ali Nadhim Razzaq, Zahir Hussain, Hind Rustum Mohammed

Research outputs 2014 to 2021

This work presents a new holistic measure for face recognition. Face recognition involves three steps: Face Detection, Feature Extraction and Matching. In the face detection process to identify the face area in face images, Viola-Jones algorithm has been used. Feature extraction is based on performing double-transformation, where discrete Tchebychev transform is performed on the geodesic distance transform of the grayscale image. Structural Similarity (SSIM) is applied to the resulting image double-transform to find matching factor with other image faces in the FEI (Brazilian) database. Performance is measured using a confidence criterion based on the similarity distance between the recognized person …

Bio-Physical Closure Criteria Without Reference Sites: Realistic Targets In Modified Rivers, Melanie L. Blanchette, Mark Lund, Robyn Stoney, Digby Short, Colm Harkin

Research outputs 2014 to 2021

The use of reference sites for establishing closure criteria in areas disturbed by mining activities is common practice. ‘Reference’ sites are those considered to be largely unimpacted by anthropogenic activity (retaining desirable natural characteristics), and occurring near disturbed sites. Sites are considered rehabilitated when their biophysical condition approximates that of the reference site. However, this approach often creates impossible or unrealistic targets for miners seeking to close rehabilitated lands. For example, reference sites are often limited in availability (or non-existent) due to impacts by other land uses. Further, any available reference sites might not be realistic matches for the rehabilitated …

Preparation Of Biomass Derived Porous Carbon: Application For Methane Energy Storage, Yong Sun, Guangzhi Sun

Research outputs 2014 to 2021

The porous carbon with high specific surface area of 3001 m2/g and pore volume of 1.59 cm3/g using corncob was prepared for methane storage. The low and high pressure adsorption equilibria were tested using the prepared carbon. The capacity of methane storage is evaluated using Tóth model with correction of fugacity using Benedict-Webb-Rubin equation of state in high pressure range. The theoretical maximum adsorption amount is achieved to be approximately 3.3 mmol/g. The adsorption process indicates physisorption dominates the adsorption with heterogeneous adsorption characteristic of sites on the surface of adsorbent at low pressure. The resultant carbon is ideal adsorbent …

A New Insight Into High-Strength Ti62nb12.2fe13.6co6.4al5.8 Alloys With Bimodal Microstructure Fabricated By Semi-Solid Sintering, Lehua Liu, Chao Yang, L.M Kang, Shengguan Qu, Xiaoquiang Li, Weiwen Zhang, Weiping Chen, Yuanyuan Li, Peijie Li, Laichang Zhang

Research outputs 2014 to 2021

It is well known that semi-solid forming could only obtain coarse-grained microstructure in a few alloy systems with a low melting point, such as aluminum and magnesium alloys. This work presents that semi-solid forming could also produce novel bimodal microstructure composed of nanostructured matrix and micro-sized (CoFe)Ti₂ twins in a titanium alloy, Ti₆₂Nb₁₂.2Fe_13.6Co_6.4Al_5.8. The semi-solid sintering induced by eutectic transformation to form a bimodal microstructure in Ti₆₂Nb_12.2Fe_13.6Co_6.4Al_5.8 alloy is a fundamentally different approach from other known methods. The fabricated alloy …

A Review Of Current Neuromorphic Approaches For Vision, Auditory, And Olfactory Sensors, Anup Vanarse, Adam Osseiran, Alexander Rassau

Research outputs 2014 to 2021

Conventional vision, auditory, and olfactory sensors generate large volumes of redundant data and as a result tend to consume excessive power. To address these shortcomings, neuromorphic sensors have been developed. These sensors mimic the neuro-biological architecture of sensory organs using aVLSI (analog Very Large Scale Integration) and generate asynchronous spiking output that represents sensing information in ways that are similar to neural signals. This allows for much lower power consumption due to an ability to extract useful sensory information from sparse captured data. The foundation for research in neuromorphic sensors was laid more than two decades ago, but recent developments …

A Novel Approach For The Preparation Of Nanosized Gd2o3 Structure: The Influence Of Surface Force On The Morphology Of Ball Milled Particles, Ly B. T. La, Yee-Kwong Leong, Harry P. Watts, Pek-Ing Watts, Kevin Hayward, Laichang Zhang

Research outputs 2014 to 2021

This work investigates the effect of inter-particle forces arising from adsorbed typical cationic and anionic surfactants on the morphology of ball milled gadolinium oxide (Gd₂O₃). The experimental outcomes are interpreted in terms of stabilization and interaction mechanisms of fine washed Gd₂O₃ particles (size diameter <1 μm) in aqueous medium under the variation of surface forces arising of adsorbed surfactant. After ball milling and washing, the point of zero charge or isoelectric point (IEP) of Gd₂O₃ particles suspension is at pH 11 where its maximum yield stress is observed. Because of hydrophobic interaction, the maximum yield stress increases by 30 times by adsorbed sodium dodecyl sulfate (SDS) and its IEP shifts slightly to a lower pH. By cetyl trimethyl ammonium bromide (CTAB), …

Optical Fiber Sensors In Physical Intrusion Detection Systems: A Review, Gary Andrew Allwood, Graham Wild, Steven Hinkley

Research outputs 2014 to 2021

Fiber optic sensors have become a mainstream sensing technology within a large array of applications due to their inherent benefits. They are now used significantly in structural health monitoring, and are an essential solution for monitoring harsh environments. Since their first development over 30 years ago, they have also found promise in security applications. This paper reviews all of the optical fiber-based techniques used in physical intrusion detection systems. It details the different approaches used for sensing, interrogation, and networking, by research groups, attempting to secure both commercial and residential premises from physical security breaches. The advantages and the disadvantages …