Engineering Commons^™

Tribocorrosion And Metal Release From Austenitic Stainless Steels 304 And 201 In Simulated Cassava Food Contact, Robert Addai, Temitope E. Olowoyo, Thalia E. Standish, Jeffrey Daniel Henderson, Ubong Eduok, Yolanda Hedberg

Chemistry Publications

Cassava is the third most significant calorie source in the tropics. Its processing has changed from traditional methods to stainless steel processing machines. This study investigated the influence of cassava on metal release from two common stainless steels, ASTM 304 and 201, with and without friction, and on tribocorrosion (multianalytically) of 304. Cassava was relatively corrosive and hindered repassivation of the surface oxide of stainless steel, but it also acted as a lubricant against mechanical friction. The combined action of friction and cassava caused a significant increase in iron, chromium, nickel, and manganese release from the stainless steels (30–35- fold …

Corrosion Of Oil Pipeline: A Case Study On The Niger Delta Region Of Nigeria., Victor U. Okoro

Corrosion Research

Corrosion of oil pipelines in Nigeria, particularly in the Niger Delta region, has extensive and detrimental environmental and societal impacts. This issue results in substantial financial losses and reputational damage for oil companies operating in the area. Local communities suffer economically, affecting agriculture and food security. Furthermore, corrosion-related oil spills lead to air quality degradation by releasing volatile organic compounds and greenhouse gases, contributing to respiratory issues and worsening climate change.

These oil spill cleanups are costly and time-consuming, with estimated expenses reaching billions of dollars. Using the Nembe Creek Trunk Line (NCTL) case study, it is evident that addressing …

Corrosion Related To The Nuclear Waste Containers, Ali Ebrahimzadeh Pilehrood

Corrosion Research

The disposal of nuclear waste is a demanding topic, and the existing methods, whether it is temporary storage in spent fuel pools or storage in geological repositories, both face the risk of corrosion-related problems. Any failure in these storage methods can potentially lead to the release of radioactive materials into the environment. To avert such catastrophic scenarios, people in the nuclear industry consistently monitor and maintain these storage facilities endlessly and attempt to improve the plans designed to store nuclear waste. Here, I will examine the nuclear waste management organization (NWMO) plan in Canada. Choosing an appropriate location for the …

Corrosion Case Study On Pipeline, Kangze Ren

Corrosion Research

The Kashagan pipeline leaks were likely caused by sulfur stress corrosion cracking, a combined corrosion mechanism developed by the presence of high pressure, the high level of hydrogen sulfide(the main "ingredient" of sour gas), and poor metallurgical choice. Improper welding and poor metallurgical examination were blamed for causing the leaking issue. The purpose of the current review is to raise the alarm about the inappropriate corrosion management of Kashagan oil production and its societal and environmental consequences.

Synergistic Effect Of Nanoclay And Barium Sulfate Fillers On The Corrosion Resistance Of Polyester Powder Coatings, Jinbao Huang, Marshall Shuai Yang, Chengqian Xian, James Joseph Noel, Yolanda S. Hedberg, Jian Chen, Ubong Eduok, Ivan Barker, Jeffrey Daniel Henderson, Haiping Zhang, Liqin Wang, Hui Zhang, Jesse Zhu

Chemistry Publications

No abstract provided.

Corrosion Case Study On Automobile, Grace Ajayi, Xinran Pan, Geethu Sasikala, Marshall S. Yang

Chemistry Publications

No abstract provided.

Experimental Heat Transfer Investigations Of A Double Pipe U-Tube Heat Exchanger Equipped With Twisted Tape And Cut Twisted Tape Internals, Raj Kumar Nayak Maloth, Glen Cletus Dsouza, Swarna Mayee Patra

Mechanical and Materials Engineering Publications

For several decades, the use of heat exchangers for both heating and cooling applications has been established in industries ranging from process to space heating. Out of the various types of heat exchangers, U-tube heat exchangers are preferred owing to their abilities to handle larger flowrates and their simplicity in construction. U-tube exchangers are often equipped with innards of various forms which facilitate higher heat transfer rates and thermal efficiencies. Although higher heat transfer rates have been established with the addition of internals, there is a lack of coherence on the underlying complex physical phenomena such as heat transfer boundary …

Exact Solutions To The Three-Dimensional Navier-Stokes Equations Using The Extended Beltrami Method, Nolan J. Dyck, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

Hard, Soft And Off-The-Shelf Foot Orthoses And Their Effect On The Angle Of The Medial Longitudinal Arch: A Biplane Fluoroscopy Study, Megan E.R. Balsdon, Colin E. Dombroski, Kristen Bushey, Thomas Jenkyn

Mechanical and Materials Engineering Publications

Background: Foot orthoses have proven to be effective for conservative management of various pathologies. Pathologies of the lower limb can be caused by abnormal biomechanics such as abnormal foot structure and alignment, leading to inadequate support. Objectives: To compare biomechanical effects of different foot orthoses on the medial longitudinal arch (MLA) during dynamic gait using skeletal kinematics. Study Design: Prospective, cross-sectional study design. Methods: The MLA angle was measured for 12 participants among three groups: pes planus, pes cavus and normal arch. Five conditions were compared: three orthotic devices (hard custom foot orthosis (CFO), soft CFO, and off-the-shelf Barefoot Science©), …

Compressible And Choked Flows In Rotating Passages, Nolan J. Dyck, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

A Numerical Approach For Determining The Resistance Of Fine Mesh Filters, Anthony Sherratt, Christopher T. Degroot, Anthony G. Straatman, Domenico Santoro

Mechanical and Materials Engineering Publications

No abstract provided.

Numerical Modeling And Control Of Solids Separation Using Continuously Moving Fine Mesh Filters, Anthony Sherratt, Christopher T. Degroot, Anthony G. Straatman, Domenico Santoro

Mechanical and Materials Engineering Publications

No abstract provided.

The Development And Numerical Modelling Of A Representative Elemental Volume For Packed Sand, Ashraf Thabet, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

A Porous Media Model Of Alveolar Duct Flow In The Human Lung, Anthony G. Straatman, Christopher T. Degroot

Mechanical and Materials Engineering Publications

No abstract provided.

Slowdown Of Surface Diffusion During Early Stages Of Bacterial Colonization, T. Vourc'h, H. Peerhossaini, J. Leopoldes, A. Mejean, F. Chauvat, C. Cassier-Chauvat

Civil and Environmental Engineering Publications

We study the surface diffusion of the model cyanobacterium Synechocystis sp. PCC6803 during the incipient stages of cell contact with a glass surface in the dilute regime. We observe a twitching motility with alternating immobile tumble and mobile run periods, resulting in a normal diffusion described by a continuous-time random walk with a coefficient of diffusion D. Surprisingly, D is found to decrease with time down to a plateau. This is observed only when the cyanobacterial cells are able to produce released extracellular polysaccharides, as shown by a comparative study between the wild-type strain and various polysaccharides-depleted mutants. The analysis …

Dynamic Coupling Of Phase-Heat And Mass Transfer In Porous Media And Conjugate Fluid/Porous Domains, Mahmoud Mohamed Mostafa Elhalwagy, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

A Conjugate Fluid-Porous Approach To Convective Heat And Mass Transfer With Application To Produce Drying, Furqan A. Khan, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

Closure Of The Macroscopic Turbulence And Non-Equilibrium Turbulent Heat And Mass Transfer Equations For Porous Media Composed Of Randomly Packed Spheres, Furqan A. Khan, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

Forced Convective Heat Transfer On A Horizontal Circular Cylinder Due To Multiple Impinging Circular Jets, Christopher M. Csernyei, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

A Conjugate Fluid-Porous Approach For Simulating Airflow In Realistic Geometric Representations Of The Human Respiratory System, Christopher Degroot Dr, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

Radiative Property Characterization Of Spherical Void Phase Graphitic Foam With Application To Solar Collection, Nolan J. Dyck, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

A New Approach To Digital Generation Of Spherical Void Phase Porous Media Microstructures, Nolan J. Dyck, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

A Comparison Of Two Headless Compression Screws For Operative Treatment Of Scaphoid Fractures, Ruby Grewal, Joseph Assini, David Sauder, Louis Ferreira, Jim Johnson, Kenneth Faber

Surgery Publications

PURPOSE: The purpose of this study was to compare the interfragmentary compression force across a simulated scaphoid fracture by two commonly used compression screw systems; the Acutrak 2 Standard and the 3.0 mm Synthes headless compression screw.

METHODS: Sixteen (8 pairs; 6 female, 2 male) cadaver scaphoids were randomly assigned to receive either the Acutrak 2 or Synthes screw with the contralateral scaphoid designated to receive the opposite. Guide wires were inserted under fluoroscopic control. Following transverse osteotomy, the distal and proximal fragments were placed on either side of a custom load cell, to measure interfragmentary compression. Screws were placed …