Engineering Commons^™

2012 Manufacturers Safety Management System Pilot Project Report Design And Manufacturing Organizations, Jeff Duven, Linda Navarro, David Hempe, Alan J. Stolzer

Publications

In October, 2009, the Aircraft Certification Service (AIR) chartered a team to conduct the Manufacturers' Safety Management Systems (MSMS) pilot project. The pilot project began in January, 2011, and encourages voluntary implementation of Safety Management Systems (SMS) among aviation Design and Manufacturing (D&M) organizations in order to allow the FAA to assess how to provide oversight of these systems. Eleven companies representing the breadth of organizations that AIR oversees participated.

The MSMS pilot project culminated in December, 2012. Information, results, and lessons learned from the pilot project were captured via the MSMS Teams' final deliverable to AIR-150. The report was …

Integrated Traffic And Communication Performance Evaluation Of An Intelligent Vehicle Infrastructure Integration (Vii) System For Online Travel Time Prediction, Yongchang Ma, Mashrur Chowdhury, Adel Sadek, Mansoureh Jeihani

Publications

This paper presents a framework for online highway travel time prediction using traffic measurements that are likely to be available from Vehicle Infrastructure Integration (VII) systems, in which vehicle and infrastructure devices communicate to improve mobility and safety. In the proposed intelligent VII system, two artificial intelligence (AI) paradigms, namely Artificial Neural Networks (ANN) and Support Vector Regression (SVR), are used to determine future travel time based on such information as current travel time, VII-enabled vehicles’ flow and density. The development and performance evaluation of the VII-ANN and VII-SVR frameworks, in both of the traffic and communications domains, were conducted, …

The Influence Of Automation On Aviation Accident And Fatality Rates: 2000-2010, Nicholas A. Koeppen

Publications

The purpose of this project is to evaluate if technological advances and implementation of automation have produced a decrease in the number and severity of accidents in commercial aviation over the last decade. To accomplish this evaluation historical commercial aviation accident data from 2000 to 2010 will be examined. Commercial fixed wing and rotary wing data will be evaluated. No aviation incident data will be collected; the project will be limited in scope to commercial aviation accidents. Accidents highlighting major deficiencies involving automation will be discussed in detail. To further support the projects purpose, emphasis will be given to evaluate …

Model Of A Mechanical Clock Escapement, John Wagner, David Moline, Eugene Vold

Publications

The mechanical tower clock originated in Europe during the 14th century to sound hourly bells and later display hands on a dial. An important innovation was the escapement mechanism, which converts stored energy into oscillatory motion for fixed time intervals through the pendulum swing. Previous work has modeled the escapement mechanism in terms of inelastic and elastic collisions. We derive and experimentally verify a theoretical model in terms of impulsive differential equations for the Graham escapement mechanism in a Seth Thomas tower clock. The model offers insight into the clock’s mechanical behavior and the functionality of the deadbeat escapement mechanism.

Evaluation And Development Of Unmanned Aircraft (Uav) For Udot Needs, Steven L. Barfuss, Austin Jensen, Shannon Clemens

Publications

This research involved the use of high-resolution aerial photography obtained from Unmanned Aerial Vehicles (UAV) to aid the Utah Department of Transportation (UDOT) in monitoring and documenting State Roadway structures and associated issues. Using geo-referenced UAV high resolution aerial photographic imagery, the project documented the before, during and after stages of the Southern Parkway construction near the new Saint George International airport, in addition to photographing and classifying wetland plant species in the Utah Lake wetland mitigation bank on the North East corner of Utah Lake.

Assessing Technological Literacy Of Middle School Students, Lawrence E. Whitman, Mandy C. Phelps, Karen V. Reynolds, Barbara S. Chaparro

Publications

Project Lead the Way (PLTW) is a rigorous and relevant pre-engineering curriculum implemented in middle schools and high schools throughout the United States. PLTW has a hands-on approach using activities and project-based learning. The College of Engineering at Wichita State University has partnered with three local school districts to implement the PLTW program to increase interest in Science, Technology, Engineering and Mathematics (STEM). This study begins to assess the impact of the PLTW program on student perceptions and attitudes toward engineering and technology as part of an ongoing three-year assessment. A pre- and post-assessment were administered to middle school students …

A Knowledge-Based Clinical Toxicology Consultant For Diagnosing Single Exposures, Joel D. Schipper, Douglas D. Dankel Ii, A. Antonio Arroyo, Jay L. Schauben

Publications

Objective: Every year, toxic exposures kill twelve hundred Americans. To aid in the timely diagnosis and treatment of such exposures, this research investigates the feasibility of a knowledge-based system capable of generating differential diagnoses for human exposures involving unknown toxins.

Methods: Data mining techniques automatically extract prior probabilities and likelihood ratios from a database managed by the Florida Poison Information Center. Using observed clinical effects, the trained system produces a ranked list of plausible toxic exposures. The resulting system was evaluated using 30,152 single exposure cases. In addition, the effects of two filters for refining diagnosis based on …

Hybrid Course Design: Leading A New Direction In Learning Programming Languages, Lulu Sun, Matthew Kindy, Caroline Cecile Marcelle Liron, Christopher Grant, Shirley Waterhouse

Publications

“Introduction to Computing for Engineers” is a programming course emphasizing problem solving. The lack of practice time, in addition to the algorithm-centric nature of programming, results in an inadequate comprehension of course material. In the fall of 2010, three faculty members created and implemented online activities consisting of video lecture slides, and mini on-line quizzes at Embry-Riddle Aeronautical University to give students more “hands-on” learning (rather than expecting them to absorb content through lecture). Students do online lecture study by themselves, then come to the lab to practice on the following day with the instructor and teaching assistant. In the …

Even Moderate Visual Impairments Degrade Drivers' Ability To See Pedestrians At Night, Joanne M. Wood, Richard A. Tyrell, Alex Chaparro, Ralph P. Marszalek, Trent P. Carberry, Byoung Sun Chu

Publications

PURPOSE. To determine the effect of moderate levels of refractive blur and simulated cataracts on nighttime pedestrian conspicuity in the presence and absence of headlamp glare.

METHODS. The ability to recognize pedestrians at night was measured in 28 young adults (M ¼ 27.6 years) under three visual conditions: normal vision, refractive blur, and simulated cataracts; mean acuity was 20/40 or better in all conditions. Pedestrian recognition distances were recorded while participants drove an instrumented vehicle along a closed road course at night. Pedestrians wore one of three clothing conditions and oncoming headlamps were present for 16 participants and absent for …

Asteroid Retrieval Feasibility Study, John Brophy, Fred Culick, Louis Friedman, Pedro Llanos, Et Al.

Publications

This report describes the results of a study sponsored by the Keck Institute for Space Studies (KISS) to investigate the feasibility of identifying, robotically capturing, and returning an entire Near-Earth Asteroid (NEA) to the vicinity of the Earth by the middle of the next decade. The KISS study was performed by people from Ames Research Center, Glenn Research Center, Goddard Space Flight Center, Jet Propulsion Laboratory, Johnson Space Center, Langley Research Center, the California Institute of Technology, Carnegie Mellon, Harvard University, the Naval Postgraduate School, University of California at Los Angeles, University of California at Santa Cruz, University of Southern …

Useful Field Of View Predicts Driving In The Presence Of Distracters, Joanne M. Wood, Alex Chaparro, Philippe Lacherez, Louise Hickson

Publications

Purpose. The Useful Field of View (UFOV®) test has been shown to be highly effective in predicting crash risk among older adults. An important question which we examined in this study is whether this association is due to the ability of the UFOV to predict difficulties in attention-demanding driving situations that involve either visual or auditory distracters.

Methods. Participants included 92 community-living adults (mean age 73.6 +- 5.4 years; range 65– 88 years) who completed all three subtests of the UFOV involving assessment of visual processing speed (subtest 1), divided attention (subtest 2), and selective attention (subtest 3); driving safety …

Teaching Higher On Bloom's Taxonomy: Experience In Introduction To Graphical Communications Course, Lulu Sun, Christopher Grant

Publications

Introduction to Graphical Communications is designed to familiarize the student with the basic principles of engineering drawing, to improve three dimensional visualization skills, and to teach the fundamentals of a computer aided design program. Much of the instruction is focused on knowledge and comprehension, low levels of Bloom's taxonomy. However, the students' ability to use this knowledge and comprehension to explore real engineering design is unknown. This paper includes the implementation of Bloom's taxonomy in the Introduction to Graphical Communications course, and shows how students are moved up Bloom's taxonomy by including a group final project into the course. Students …

Regional Jet Aircraft Competitiveness: Challenges And Opportunities, Tamilla Curtis, Dawna L. Rhoades

Publications

The Purpose of the Study is to investigate the current trends in the aviation industry in regards to regional jets and to examine country-level factors that can potentially explain the number of Embraer and Bombardier regional jet deliveries. Possible factors include GDP, price of crude oil, prior aircraft deliveries and the land area of receiving RJ countries.

On The Stability Of A Microstructure Model, Mihhail Berezovski, Arkadi Berezovski

Publications

Abstract

The asymptotic stability of solutions of the Mindlin-type microstructure model for solids is analyzed in the paper. It is shown that short waves are asymptotically stable even in the case of a weakly non-convex free energy dependence on microdeformation.

Research highlights

The Mindlin-type microstructure model cannot describe properly short wave propagation in laminates. A modified Mindlin-type microstructure model with weakly non-convex free energy resolves this discrepancy. It is shown that the improved model with weakly non-convex free energy is asymptotically stable for short waves.

Generation Of Four Dimensional Grid Of Probabilistic Hazards For Use By Decision Support Tools, Ian A. Wilson

Publications

A new method and system for generating probabilities of objective values of hazards as a fine granularity grid in four dimensions (three spatial dimensions plus time) to be used by decision support and visualization tools. Utilizing the pro­posed system, proxies for hazard data received at different times and in different formats may be used as input data to a grid of intelligent software agents which generate a four dimensional matrix of probabilities of objective values of hazards. The method allows for proxies and/or subjective information on hazards that may arrive asynchronously and with coarse temporal and spatial accuracy to be …

Manufacturing Process Modeling And Application To Intelligent Control, M. Laine Mears, Parakshit Mehta, Mathew Kuttolamadom, Carlos Montes, Joshua Jones, Wesley Salandro, Drew Werner

Publications

This paper reviews the major findings and intellectual contributions made over the past five years through research in the laboratory of Dr. Laine Mears at Clemson University. The focus of the laboratory’s work is in modeling of traditional and novel manufacturing processes, and application of such models to process control through model-based control strategies. Introducing intelligence to the manufacturing process through physical descriptions of the phenomena being controlled allows for more precise control as compared with reactive systems or those with simple feed-forward control schemes. For traditional processes, new approaches to process characterization allow for more precise control. For novel …

Incorporating Engineering Design Challenges Into Stem Courses, Daniel L. Householder, Christine E. Hailey

Publications

The National Center for Engineering and Technology Education (NCETE) invited a small group of experienced engineering educators, curriculum developers, cognitive scientists, and professional development providers to engage in the discussion of guidelines for the selection and development of engineering design challenges suitable for all students in grades 9-12. That effort resulted in seven provocative papers (Carr & Strobel, 2011; Denson, 2011; Eisenkraft, 2011; Hynes et al., 2011; Jonassen, 2011a; Schunn, 2011; Sneider, 2011) that are accessible on the NCETE web site at http://ncete.org/flash/research.php NCETE hosted two Caucuses, each consisting of “a group of people united to promote an agreed-upon cause” …

Wave Propagation And Dispersion In Microstructured Solids, Arkadi Berezovski, Juri Engelbrecht, Mihhail Berezovski

Publications

A series of numerical simulations is carried on in order to understand the accuracy of dispersive wave models for microstructured solids. The computations are performed by means of the finite-volume numerical scheme, which belongs to the class of wave-propagation algorithms. The dispersion effects are analyzed in materials with different internal structures: microstructure described by micromorphic theory, regular laminates, laminates with substructures, etc., for a large range of material parameters and wavelengths.

Disparities In Weather Education Across Professional Flight Baccalaureate Degree Programs, Thomas A. Guinn, Krista M. Rader, Thomas A. Guinn

Publications

The required meteorology coursework for 22 accredited professional flight baccalaureate degree programs was examined and compared. Significant differences were noted in both the number of required meteorology courses as well as the number of required meteorology credit hours. While all programs required at least one three-credit meteorology course, not all programs required an aviation-specific meteorology course. In addition to the required number of meteorology courses and credit hours, topics within the aviation-specific meteorology courses were also examined. The study showed the topics of “flight hazards” and “aviation weather reports and charts” were identified most frequently in course descriptions, followed third …

Infusing Engineering Concepts: Teaching Engineering Design, Jenny L. Daugherty

Publications

Engineering has gained considerable traction in many K-12 schools. However, there are several obstacles or challenges to an effective approach that leads to student learning. Questions such as where engineering best fits in the curriculum; how to include it authentically and appropriately; toward what educational end; and how best to prepare teachers need to be answered. Integration or infusion appears to be the most viable approach; instead of stand-alone engineering courses squeezing into the already crammed curriculum. An integrative approach whereby engineering is infused into the existing curriculum, within science, technology, mathematics or other courses, appears to be the best …

Team Based Engineering Design Thinking, Nathan Mentzer

Publications

The objective of this research was to explore design thinking among teams of high school students. This objective is encompassed in the research question driving this inquiry: How do teams of high school students allocate time across stages of design? Design thinking on the professional level typically occurs in a team environment. Many individuals contribute in a variety of ways to facilitate the successful development of a solution to a problem. Teachers often require students to work in groups, but little is known about how the group functions in the context of design and the potential interaction between group performance …

Effects Of Visual Interaction Methods On Simulated Unmanned Aircraft Operator Situational Awareness, Brent A. Terwilliger

Publications

The limited field of view of static egocentric visual displays employed in unmanned aircraft controls introduces the soda straw effect on operators, which significantly affects their ability to capture and maintain situational awareness by not depicting peripheral visual data. The problem with insufficient operator situational awareness is the resulting increased potential for error and oversight during operation of unmanned aircraft, leading to accidents and mishaps costing United States taxpayers between $4 million to $54 million per year. The purpose of this quantitative experimental completely randomized design study was to examine and compare use of dynamic eyepoint to static visual interaction …

Open-Ended Project Learning Experience In Graphical Communication, Lulu Sun, Christopher Grant

Publications

This paper includes the implementation of Bloom’s taxonomy in the introduction to graphical communication course and shows how students are moved up Bloom’s taxonomy by changing previous guided individual final project to open-ended projects. Instead of following the instructor’s direction to complete the model design, students are required to research the product they want to design, and build the model by themselves. The open-ended projects enable and challenge students to work on higher level of Bloom’s taxonomy by emphasizing design creativity, exploring real engineering design problem, and enhancing their oral and written skills.

High Tech High Touch: Lessons Learned From Project Haiti 2011, Yan Tang, Marc Compere, Yung Lun Wong, Jared Anthony Coleman, Matthew Charles Selkirk

Publications

In this paper, we will share our experiences and lessons learned from a design project for providing clean water to a Haitian orphanage (Project Haiti 2011). Supported by funds from a renewable energy company and the university president’s office, five engineering students and two faculty members from Embry-Riddle Aeronautical University successfully designed and installed a solar powered water purification system for an orphanage located in Chambellan, Haiti. This paper discusses the unique educational experiences gained from unusual design constraints, such as ambiguity of existing facilities due to limited communication, logistics of international construction at a remote village location, and cross-cultural …

Multi-Disciplinary Hands-On Desktop Learning Modules And Modern Pedagogies, Bernard J. Van Wie, David B. Thiessen, Marc Compere, Ximena Toro, Jennifer C. Adam, Et Al.

Publications

Our team’s research focuses on fundamental problems in undergraduate education in terms of how to expand use of well researched, yet still “new”, teaching pedagogies of ‘sensing’ or ‘hands-on’, ‘active’ and ‘problem-based learning’ within engineering courses. It is now widely accepted that traditional lectures ARE NOT best for students – yet that is what the community almost universally does.

To address this issue we are developing new Desktop Learning Modules (DLMs) that contain miniaturized processes with a uniquely expandable electronic system to contend with known sensor systems/removable cartridges, as well as, unknown expansions to the project. We have shown that …