Engineering Commons^™

Implementation Of Static Rfid Landmarks In Slam For Planogram Compliance, Brennan L. Drake

Honors College Theses

Autonomous robotic systems are becoming increasingly prevalent in everyday life and exhibit robust solutions in a wide range of applications. They face many obstacles with the foremost of which being SLAM, or Simultaneous Localization and Mapping, that encompasses both creation of the map of an unknown environment and localization of the robot in said environment. In this experiment, researchers propose the use of RFID tags in a semi-dynamic commercial environment to provide concrete landmarks for localization and mapping in pursuit of increased locational certainty. With this obtained, the ultimate goal of the research is to construct a robotics platform for …

Intelligent Autonomous Inspections Using Deep Learning And Detection Markers, Alejandro Martinez Acosta

Open Access Theses & Dissertations

Inspection of industrial and scientific facilities is a crucial task that must be performed regularly. These inspections tasks ensure that the facilityâ??s structure is in safe operational conditions for humans. Furthermore,the safe operation of industrial machinery, is dependent on the conditions of the environment. For safety reasons, inspections for both structural integrity and equipment is often manually performed by operators or technicians. Naturally, this is often a tedious and laborious task. Additionally, buildings and structures frequently contain hard to reach or dangerous areas, which leads to the harm, injury or death of humans. Autonomous robotic systems offer an attractive solution …

Autonomous Navigator Mobile Robot Upgrade, David Sansoucy

Thinking Matters Symposium

The mobile robot platform has been developed over the course of 10 years at USM. In Spring 2020, Belle-Isle and Werner updated the previous framework by rewriting the software to use the ROS framework running on an on-board Raspberry Pi 3. They also implemented navigation using an A* motion planning algorithm and image processing. In Summer 2021, Ames incorporated Lidar and Kinect sensors onto the robot to improve its real-time navigation capabilities. He also made improvements to the power distribution systems. This project aimed to build on the ROS frameworks developed by the previous 2 teams with the main goal …

Garden Bot: Autonomous Home Garden Weed Removal Robot, Brendon Lovejoy, Robert Connolly, Isaac Lucas, Stevan Veselinov

Williams Honors College, Honors Research Projects

With frequent weeding being a tedious chore and an essential task for a successful garden, there is need for an automated method of handling this routine. Existing technologies utilize computer vision, GPS, multiple units and other tools to remove weeds from garden plots. However, these solutions are often complex and expensive, suited for large agricultural plots in contrast to small-scale home gardens. In addition, many of these technologies, along with manual tillers and cultivators suited for home use, are unable to perform weeding within rows of crops in a process known as intra-row weeding. The Garden Bot is an autonomous, …

Design Of A Robotic Inspection Platform For Structural Health Monitoring, Jason R. Soto

FIU Electronic Theses and Dissertations

Actively monitoring infrastructure is key to detecting and correcting problems before they become costly. The vast scale of modern infrastructure poses a challenge to monitoring due to insufficient personnel. Certain structures, such as refineries, pose additional challenges and can be expensive, time-consuming, and hazardous to inspect.

This thesis outlines the development of an autonomous robot for structural-health-monitoring. The robot is capable of operating autonomously in level indoor environments and can be controlled manually to traverse difficult terrain. Both visual and lidar SLAM, along with a procedural-mapping technique, allow the robot to capture colored-point-clouds.

The robot is successfully able to automate …

Autonomous Butter Robot, David Chau, Michael Hegglin

Computer Engineering

Don’t you wish your butter would come to you? Well now it can with the patented Michael and David butter robot! Based on an idea from a TV show, our team set out to see if a similar robot was possible to make in real life. The objective was simple. Can we make a small table sized robot that can bring a person butter using image detection software? With that question in mind we set out buying our components. We wanted to keep it small, so we looked up devices that could do simple image processing and from there we …

Surface Autonomous Vehicle For Emergency Rescue, Max Emerick, Ryan Shields, Christopher Feickert, Raymond Impara

Mechanical Engineering

The goal of this document is to clearly define the problem parameters and project objectives and to clearly describe the design process, planned final design, and manufacturing and testing procedures for the senior design project of Team 26: SAVER -- the Surface Autonomous Vehicle for Emergency Rescue. This is both for the purpose of project planning and for clear communication between all parties involved in the project.

The objective of the SAVER project is to develop a proof of concept for an autonomous maritime search and rescue vehicle for aiding in man-overboard missions. To accomplish this goal, a list of …

Communication Capability For A Simulation-Based Test And Evaluation Framework For Autonomous Systems, Ntiana Sakioti

Computational Modeling & Simulation Engineering Theses & Dissertations

The design and testing process for collaborative autonomous systems can be extremely complex and time-consuming, so it is advantageous to begin testing early in the design. A Test & Evaluation (T&E) Framework was previously developed to enable the testing of autonomous software at various levels of mixed reality. The Framework assumes a modular approach to autonomous software development, which introduces the possibility that components are not in the same stage of development. The T&E Framework allows testing to begin early in a simulated environment, with the autonomous software methodically migrating from virtual to augmented to physical environments as component development …

Autonomous Combat Robot, Andrew J. Szabo Ii, Chris Heldman, Tristin Weber, Tanya Tebcherani, Holden Leblanc, Fabian Ardeljan

Williams Honors College, Honors Research Projects

This honors project will also serve as an engineering senior design project.

The objective is to design and build the software and electrical systems for a 60 lb weight class combat robot that will function autonomously and outperform manually driven robots during competition.

While running autonomously, the robot will use LiDAR sensors to detect and attack opponent robots. This robot will also be able to be remote controlled in manual mode. This will mitigate the risk in case the autonomy or sensors fail. LED lights on the robot will indicate whether it is in autonomous or manual mode. The system …

A Comparative Study Of Feature Detection Methods For Auv Localization, Andrew Y. Kim

Master's Theses

Underwater localization is a difficult task when it comes to making the system autonomous due to the unpredictable environment. The fact that radio signals such as GPS cannot be transmitted through water makes autonomous movement and localization underwater even more challenging. One specific method that is widely used for autonomous underwater navigation applications is Simultaneous Localization and Mapping (SLAM), a technique in which a map is created and updated while localizing the vehicle within the map. In SLAM, feature detection is used in landmark extraction and data association by examining each pixel and differentiating landmarks pixels from those of the …

Corridor Navigation For Monocular Vision Mobile Robots, Matthew James Ng

Master's Theses

Monocular vision robots use a single camera to process information about its environment. By analyzing this scene, the robot can determine the best navigation direction. Many modern approaches to robot hallway navigation involve using a plethora of sensors to detect certain features in the environment. This can be laser range finders, inertial measurement units, motor encoders, and cameras.

By combining all these sensors, there is unused data which could be useful for navigation. To draw back and develop a baseline approach, this thesis explores the reliability and capability of solely using a camera for navigation. The basic navigation structure begins …

Autonomous Uav Battery Swapping, Reed Jacobsen, Nikolai Ruhe, Nathan Dornback

Williams Honors College, Honors Research Projects

One of the main hindrances of unmanned aerial vehicle (UAV) technology are power constraints. One way to alleviate some power constraints would be for two UAVs to exchange batteries while both are in flight. Autonomous mid-air battery swapping will expand the scope of UAV technology by allowing for indefinite flight times and longer missions. A single board computer will control each UAV’s flight software to respond to inputs to align with each other mid-flight. When the two UAVs have joined, mechanical components will exchange a depleted battery on the worker UAV for a freshly charged battery that belongs to the …

Event And Time-Triggered Control Module Layers For Individual Robot Control Architectures Of Unmanned Agricultural Ground Vehicles, Tyler Troyer

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Automation in the agriculture sector has increased to an extent where the accompanying methods for unmanned field management are becoming more economically viable. This manifests in the industry’s recent presentation of conceptual cab-less machines that perform all field operations under the high-level task control of a single remote operator. A dramatic change in the overall workflow for field tasks that historically assumed the presence of a human in the immediate vicinity of the work is predicted. This shift in the entire approach to farm machinery work provides producers increased control and productivity over high-level tasks and less distraction from operating …

Modeling Autonomous Vehicles Through Radio Controlled Cars, Eva S. Chen

Computer Engineering

Autonomous vehicles have a lot of potential in improving people’s everyday lives. They could reduce congestion, reduce collisions, enhance mobility, and more. But with these benefits come security and privacy risks. In order to research and test some of these risks, we are building a set of scale autonomous cars that can model autonomous and collaborative behaviors. One such behaviour would be platooning, where a group of vehicles can travel closely together at high speeds by following a lead car. We are doing this with various sensors and control algorithms to allow for future modularity.

Models For Pedestrian Trajectory Prediction And Navigation In Dynamic Environments, Jeremy N. Kerfs

Master's Theses

Robots are no longer constrained to cages in factories and are increasingly taking on roles alongside humans. Before robots can accomplish their tasks in these dynamic environments, they must be able to navigate while avoiding collisions with pedestrians or other robots. Humans are able to move through crowds by anticipating the movements of other pedestrians and how their actions will influence others; developing a method for predicting pedestrian trajectories is a critical component of a robust robot navigation system. A current state-of-the-art approach for predicting pedestrian trajectories is Social-LSTM, which is a recurrent neural network that incorporates information about neighboring …

Autonomous Quadrotor Collision Avoidance And Destination Seeking In A Gps-Denied Environment, Thomas C. Kirven

Theses and Dissertations--Mechanical Engineering

This thesis presents a real-time autonomous guidance and control method for a quadrotor in a GPS-denied environment. The quadrotor autonomously seeks a destination while it avoids obstacles whose shape and position are initially unknown. We implement the obstacle avoidance and destination seeking methods using off-the-shelf sensors, including a vision-sensing camera. The vision-sensing camera detects the positions of points on the surface of obstacles. We use this obstacle position data and a potential-field method to generate velocity commands. We present a backstepping controller that uses the velocity commands to generate the quadrotor's control inputs. In indoor experiments, we demonstrate that the …

Packmule, Jared M. Alexander, Jared J. Ford, Timothy J. Griffiths, Andray Pennington

Williams Honors College, Honors Research Projects

People face demands of hauling equipment and belongings with them every day, whether it be for work or leisure. This design report discusses and details a product that would allow people to overcome the struggles of this. The Packmule is an autonomous following robot that has the capability of carrying a load up to 30 pounds. The design involves two independently controlled motors operating two drive wheels so that the Packmule will be flexible in the directions it can move. There are also two more steering wheels for support of the base and the load inside. The way in which …

Robostock: Autonomous Inventory Tracking, Drew Christian Balthazor

Computer Engineering

No abstract provided.

Android Drone: Remote Quadcopter Control With A Phone, Aubrey John Russell

Computer Engineering

The purpose of the “Android Drone” project was to create a quadcopter that can be controlled by user input sent over the phone’s Wi-Fi connection or 4G internet connection. Furthermore, the purpose was also to be able to receive live video feedback over the internet connection, thus making the drone an inexpensive option compared to other, equivalent drones that might cost thousands of dollars. Not only that, but the Android phone also has a host of other useful features that could be utilized by the drone: this includes GPS, pathing, picture taking, data storage, networking and TCP/IP, a Java software …

Autonomous Android: Autonomous 3d Environment Mapping With Android Controlled Multicopters, Tate Glick Hawkersmith

Masters Theses

Autonomous robots are robotic platforms with a high degree of autonomy, programmed to perform various behaviors or tasks. They can either be semi-autonomous, only operable within the strict confines of their direct environment, or fully autonomous, capable of sensing and navigating their environments without any human interaction.

In this thesis, I focus on fully autonomous robotic platforms, specifically multicopters, controlled by an onboard Android-driven device, a widely available operating system for smartphones and tablets with over 1.4 billion active monthly users worldwide [Callaham 2015]. The main objective of this research is to create a plug and play solution for autonomous …

A Simulation-Based Layered Framework Framework For The Development Of Collaborative Autonomous Systems, Ioannis Sakiotis

Computational Modeling & Simulation Engineering Theses & Dissertations

The purpose of this thesis is to introduce a simulation-based software framework that facilitates the development of collaborative autonomous systems. Significant commonalities exist in the design approaches of both collaborative and autonomous systems, mirroring the sense, plan, act paradigm, and mostly adopting layered architectures. Unfortunately, the development of such systems is intricate and requires low-level interfacing which significantly detracts from development time. Frameworks for the development of collaborative and autonomous systems have been developed but are not flexible and center on narrow ranges of applications and platforms. The proposed framework utilizes an expandable layered structure that allows developers to define …

Universal Uav Payload Interface, Nolan Reker, David Troy Jr, Drew Troxell

Computer Engineering

Unmanned Aerial Vehicle (UAV) technology is becoming increasingly accessible for civilian use. Both open-source and commercial-purpose UAVs can be obtained affordably or even built. However, the platforms available are very segmented in their customization to a specific application (i.e. land surveying, payload delivery). This project aims to create a Universal Payload Interface (UPI) mounted to the underside of multi-rotors or other UAVs to enable the attachment of customizable sensor payloads. These payloads allow a single UAV to be rapidly reconfigured to perform a multitude of tasks.

The Universal Payload Interface facilitates communication between the payload, onboard flight controller, and operator …

Adaptive Nonlinear Control For Autonomous Ground Vehicles, William Spencer Black

Open Access Theses

We present the background and motivation for ground vehicle autonomy, and focus on uses for space-exploration. Using a simple design example of an autonomous ground vehicle we derive the equations of motion. After providing the mathematical background for nonlinear systems and control we present two common methods for exactly linearizing nonlinear systems, feedback linearization and backstepping. We use these in combination with three adaptive control methods: model reference adaptive control, adaptive sliding mode control, and extremum-seeking model reference adaptive control. We show the performances of each combination through several simulation results. We then consider disturbances in the system, and design …

Android Powered Autonomous Robot, Dennis Cagle, Zachary Negrey

Computer Engineering

The goal of this Senior Project was to create an autonomous robot powered by an Android phone to compete in Roborodentia 2012. In order to accomplish this task, we used the Android Open Accessory Development Kit (Android ADK) to interface an Android phone with a custom Arduino microcontroller (Arduino Mega) designed by Google. The project contained design and implementation of hardware, electronic devices, and software.

Autonomous Crash Avoidance System, Brian Ujiie, Gordon Woods, Joshua Miller

Mechanical Engineering

No abstract provided.

Autonomous Golf Cart Vision Using Hsv Image Processing And Commercial Webcam, John D. Fulton

Electrical Engineering

Using openCV I was able to use a store bought webcam and my laptop to build code that could detect the lane lines and the curb on the road and use them to calculate a trajectory for an autonomous vehicle to follow. The code does have some flaws, as discovered in testing, and definitely room for improvement but it still functions as a useful basis for development. Developed primarily for the Autonomous Golf Car Project at Cal Poly the principles of how it functions could be applied to other projects that want to use computer vision.

Obstacle Avoidance Subsystem For An Autonomous Robot, Kirstie King

Honors Program Projects

This research project details the design and implementation of the Obstacle Avoidance Subsystem for the Tigertron autonomous robot. This subsystem is designed to function as a smaller part of the whole Software Architecture and has the purpose of detecting, through use of a Laser Rangefinder, obstacles in the vehicle’s environment. Once the hardware is set up and configured, the Tigertron’s central software control architecture requests data from the Laser Rangefinder through a serial communication channel. This data is converted into objects that represent obstacles in the form of polar coordinates. These objects are stored in a container so the central …