Engineering Commons^™

Single Propeller Drone (Singrone): Inovasi Rancang Bangun Drone Single Propeller Sebagai Wahana Pemetaan Lahan Berbasis Unmaned Aerial Vehicle (Uav), Mohammad Giffari Anta Pradana

Elinvo (Electronics, Informatics, and Vocational Education)

Dewasa ini, teknologi sebagai faktor memberikan kontribusi yang signifikan dalam peningkatan
kualitas hidup manusia. Salah satu teknologi yang berkembang saat ini adalah drone. Drone adalah
pesawat tanpa awak yang dikendalikan dengan sebuah remote control , di lengkapi dengan GPS sebagai
navigasi, dan lock position. Pada umumnya drone digunakan untuk berbagai hal, seperti pemantauan lalu
lintas, pemetaan lahan, investigasi dan sebagainya. Namun penggunaan drone dengan menggunakan
banyak propeller merupakan salah satu masalah penggunaan drone. Semakin banyak propeller yang
digunakan, maka masa hidup drone di udara juga akan semakin berkurang. Hal ini diarenakan baterai
yang digunakan oleh wahana tersebut banyak digunakan untuk …

Study Of Mobile Robot Operations Related To Lunar Exploration, Matthew Cross

Electronic Thesis and Dissertation Repository

Mobile robots extend the reach of exploration in environments unsuitable, or unreachable, by humans. Far-reaching environments, such as the south lunar pole, exhibit lighting conditions that are challenging for optical imagery required for mobile robot navigation. Terrain conditions also impact the operation of mobile robots; distinguishing terrain types prior to physical contact can improve hazard avoidance.

This thesis presents the conclusions of a trade-off that uses the results from two studies related to operating mobile robots at the lunar south pole. The lunar south pole presents engineering design challenges for both tele-operation and lidar-based autonomous navigation in the context of …

Control Servovisual Para Una Estructura Serial Robótica Tipo 5r, Edwin Alejandro Pérez Díaz, José Miguel Manrique Hernández

Ingeniería en Automatización

En este trabajo se presenta el desarrollo de un control servovisual a una estructura robótica serial Mitsubishi Melfa RV-M1 con el fin de realizar una comparación entre dos metodologías, la primera basada en un sistema de control clásico (PID), y la segunda basada en el sistema de control de tipo servovisual, haciendo énfasis en la posición y la orientación de la herramienta y estableciendo cuál de las dos metodologías es más apropiada para una aplicación y sus limitaciones. Se realiza la simulación del sistema con un modelado dinámico a través de la herramienta Simulink de MATLAB. Se determinan los errores …

Robostock: Autonomous Inventory Tracking, Drew Christian Balthazor

Computer Engineering

No abstract provided.

Electronic Deer Warning System, David Zhuo, Anlang Lu

Computer Engineering

Deer-vehicle collisions (DVCs) are extremely dangerous, often injuring or even killing drivers. Unfortunately, this form of automotive accident is commonplace in the United States. According to the NHTSA, DVCs result in 200 human deaths a year.2

Despite these deadly incidents, there currently are no deployed federal or state systems for preventing DVCs. There are many consumer electronic deer deterrent products, but their long-term effectiveness is questionable.3 In fact, there does not appear to be much research into electronic deer deterrent systems. Aside from constant audio output and electric shock, no other means of electronic deterrent exist. Even if fixed deterrents …

Android Drone: Remote Quadcopter Control With A Phone, Aubrey John Russell

Computer Engineering

The purpose of the “Android Drone” project was to create a quadcopter that can be controlled by user input sent over the phone’s Wi-Fi connection or 4G internet connection. Furthermore, the purpose was also to be able to receive live video feedback over the internet connection, thus making the drone an inexpensive option compared to other, equivalent drones that might cost thousands of dollars. Not only that, but the Android phone also has a host of other useful features that could be utilized by the drone: this includes GPS, pathing, picture taking, data storage, networking and TCP/IP, a Java software …

Autonomous Golf Cart Firmware, Gerik Kubiak

Computer Engineering

The Autonomous Golf Cart Project is a project sponsored by the Cal Poly Robotics Club. The multidisciplinary team is adding sensors and electronics to a regular golf cart with the goal to drive the golf cart around campus without and human input. This task requires a plethora of hardware and firmware to control that hardware. The firmware provides an interface for higher level software to then control the hardware and therefore drive the golf cart. This report is focused on the hardware modifications and the firmware used in order to drive the golf cart from a computer.

Liquid Metal Particle Popping: Nanoscale To Macroscale, Trevor R. Lear

Open Access Theses

Liquid metal nanoparticles can be used to produce stretchable electronic devices. Understanding the mechanical properties of liquid metal nanoparticles is crucial to optimizing their use in various applications, especially printing of flexible, stretchable electronics. Smaller nanoparticles are desired for high-resolution printing and compatibility with existing scalable manufacturing methods; however, they contain less liquid metal and are more difficult to rupture than larger particles, making them less desirable for post-processing functionality. This study investigates the mechanics of liquid metal particle rupture as a function of particle size. We employ compression of particle films to characterize the composition of the particle core …

Psychophysiological Analysis Of A Pedagogical Agent And Robotic Peer For Individuals With Autism Spectrum Disorders., Mohammad Nasser Saadatzi

Electronic Theses and Dissertations

Autism spectrum disorder (ASD) is a neurodevelopmental disorder characterized by ongoing problems in social interaction and communication, and engagement in repetitive behaviors. According to Centers for Disease Control and Prevention, an estimated 1 in 68 children in the United States has ASD. Mounting evidence shows that many of these individuals display an interest in social interaction with computers and robots and, in general, feel comfortable spending time in such environments. It is known that the subtlety and unpredictability of people’s social behavior are intimidating and confusing for many individuals with ASD. Computerized learning environments and robots, however, prepare a predictable, …

Design Of A Flexible Control Platform And Miniature In Vivo Robots For Laparo-Endoscopic Single-Site Surgeries, Lou P. Cubrich

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Minimally-invasive laparoscopic procedures have proven efficacy for a wide range of surgical procedures as well as benefits such as reducing scarring, infection, recovery time, and post-operative pain. While the procedures have many advantages, there are significant shortcomings such as limited instrument motion and reduced dexterity. In recent years, robotic surgical technology has overcome some of these limitations and has become an effective tool for many types of surgeries. These robotic platforms typically have an increased workspace, greater dexterity, improved ergonomics, and finer control than traditional laparoscopic methods. This thesis presents the designs of both a four degree-of-freedom (DOF) and 5-DOF …

Modeling, Sensorization And Control Of Concentric-Tube Robots, Ran Xu

Electronic Thesis and Dissertation Repository

Since the concept of the Concentric-Tube Robot (CTR) was proposed in 2006, CTRs have been a popular research topic in the field of surgical robotics. The unique mechanical design of this robot allows it to navigate through narrow channels in the human anatomy and operate in highly constrained environments. It is therefore likely to become the next generation of surgical robots to overcome the challenges that cannot be addressed by current technologies. In CSTAR, we have had ongoing work over the past several years aimed at developing novel techniques and technologies for CTRs. This thesis describes the contributions made in …

Perceptions Of Planned Versus Unplanned Malfunctions: A Human-Robot Interaction Scenario, Theresa T. Kessler, Keith R. Macarthur, Manuel Trujillo-Silva, Thomas Macgillivray, Chris Ripa, Peter A. Hancock

Keith Reid MacArthur

Mesh Addition Based On The Depth Image (Mabdi), Lucas E. Chavez

Mechanical Engineering ETDs

Many robotic applications utilize a detailed map of the world and the algorithm used to produce such a map must take into consideration real-world constraints such as computational and memory costs. Traditional mesh-based environmental mapping algorithms receive data from the sensor, create a mesh surface from the data, and then append the surface to a growing global mesh. These algorithms do not provide a computationally efficient mechanism for reducing redundancies in the global mesh. MABDI is able to leverage the knowledge contained in the global mesh to find the difference between what we expect our sensor to see and what …

Multi-Classifier Fusion Strategy For Activity And Intent Recognition Of Torso Movements, Abhijit Kadrolkar

Doctoral Dissertations

As assistive, wearable robotic devices are being developed to physically assist their users, it has become crucial to develop safe, reliable methods to coordinate the device with the intentions and motions of the wearer. This dissertation investigates the recognition of user intent during flexion and extension of the human torso in the sagittal plane to be used for control of an assistive exoskeleton for the human torso. A multi-sensor intent recognition approach is developed that combines information from surface electromyogram (sEMG) signals from the user’s muscles and inertial sensors mounted on the user’s body. Intent recognition is implemented by following …

Intent Recognition Of Rotation Versus Translation Movements In Human-Robot Collaborative Manipulation Tasks, Vinh Q. Nguyen

Masters Theses

The goal of this thesis is to enable a robot to actively collaborate with a person to move an object in an efficient, smooth and robust manner. For a robot to actively assist a person it is key that the robot recognizes the actions or phases of a collaborative tasks. This requires the robot to have the ability to estimate a person’s movement intent. A hurdle in collaboratively moving an object is determining whether the partner is trying to rotate or translate the object (the rotation versus translation problem). In this thesis, Hidden Markov Models (HMM) are used to recognize …

Formal Performance Guarantees For Behavior-Based Localization Missions, Damian Lyons, Ron Arkin, Shu Jiang, Matt O'Brien, Feng Tang, Peng Tang

Faculty Publications

Abstract— Localization and mapping algorithms can allow a robot to navigate well in an unknown environment. However, whether such algorithms enhance any specific robot mission is currently a matter for empirical validation. In this paper we apply our MissionLab/VIPARS mission design and verification approach to an autonomous robot mission that uses probabilistic localization software.

Two approaches to modeling probabilistic localization for verification are presented: a high-level approach, and a sample-based approach which allows run-time code to be embedded in verification. Verification and experimental validation results are presented for two different missions, each using each method, demonstrating the accuracy …

Studying The Effects Of Serpentine Soil On Adapted And Non-Adapted Species Using Arduino Technology, Kiana Saniee, Edward Himelblau, Brian Paavo

STAR Program Research Presentations

Abstract: Serpentine soils are formed from ultramafic rocks and are represent an extreme environment for plants. Serpentine soils are unique in that they carry high concentrations of heavy metals, are nutrient deficient, particularly in calcium, and have poor water retention capabilities. Although these soils constitute harsh conditions for plant growth, there are a number of species that are adapted and even endemic to serpentine soil. Water retention by commercial potting mix was compared with serpentine soil. Also, serpentine adapted and non-adapted species were grown in both soil treatments and physiological data were collected. We used the Arduino electronic platform to …

Data Fusion For Vision-Based Robotic Platform Navigation, Andrés F. Echeverri

Master's Theses (2009 -)

Data fusion has become an active research topic in recent years. Growing computational performance has allowed the use of redundant sensors to measure a single phenomenon. While Bayesian fusion approaches are common in general applications, the computer vision community has largely relegated this approach. Most object following algorithms have gone towards pure machine learning fusion techniques that tend to lack flexibility. Consequently, a more general data fusion scheme is needed. The motivation for this work is to propose methods that allow for the development of simple and cost effective, yet robust visual following robots capable of tracking a general object …

Landmark Detection With Surprise Saliency Using Convolutional Neural Networks, Feng Tang, Damian Lyons, Daniel Leeds

Faculty Publications

Abstract—Landmarks can be used as reference to enable people or robots to localize themselves or to navigate in their environment. Automatic definition and extraction of appropriate landmarks from the environment has proven to be a challenging task when pre-defined landmarks are not present. We propose a novel computational model of automatic landmark detection from a single image without any pre-defined landmark database. The hypothesis is that if an object looks abnormal due to its atypical scene context (what we call surprise saliency), it then may be considered as a good landmark because it is unique and easy to spot by …

Mechanical Design And Optimization Of An Interactive Animatronic Bald Eagle, Eric Burns

Phi Kappa Phi Research Symposium (2012-2016)

Animatronics is a specialized sub-category of mechatronics, a fusion of mechanical and electrical engineering. The field has grown from small, individual projects into a major industry. As animatronics progress, mechanical engineers are pushed to design internal structures which occupy ever-decreasing spaces and to ensure designs can undergo maintenance and modifications smoothly. This research investigates methods of reducing space required for mechanisms and several other beneficial methods of development as well as varying satisfactions for audiences when exposed to actor-controlled systems rather than pre-scripted functions. The mechanical systems are designed using CAD software available at Georgia Southern. On-campus, resources are used …

Algorithms For Lidar Based Traffic Tracking: Development And Demonstration, Vamsi K. Bandaru

Open Access Theses

The current state of the art of traffic tracking is based on the use of video, and requires extensive manual intervention for it to work, including hours of painstaking human examination of videos frame by frame which also make the acquisition of data extremely expensive. Fundamentally, this is because we do not have observability of the actual scene from a camera which captures a 2D projection of the 3D world. Even if video were to be automated, it would involve such algorithms as RANSACK for outlier elimination while matching features across frames or across multiple cameras. This results in algorithms …

Command Shaping With Constrained Peak Input Acceleration To Minimize Residual Vibration In A Flexible-Joint Robot, Yumeng Wu

Open Access Theses

Rapid point-to-point motion is limited when flexibilities exist in the system. In order to minimize the vibrations related to joint flexibilities, much work has been done, including modifying the system so that vibrations can be damped out more quickly, calculating the inverse dynamics of the system and constructing shaped input profiles that avoid system natural frequencies. In this work, the earlier fixed-time command shaping method has been extended to a peak-acceleration-constrained approach with two basis functions, the ramped sinusoid function and the versine function, such that the maximum acceleration is guaranteed without overconstraining the input profiles. The approach is developed …

Analysis Of Feedback Control Applied With Command Shaping To Minimize Residual Vibration, Nicholas L. Jacobs

Open Access Theses

Joint flexibility is a physical trait that affects all robotic systems to some degree. This characteristic has been shown to be very detrimental to the performance of these robotic systems when implementing fast point-to-point motion. During such motion, the robot will induce vibrations in its structure that will extend past the completion of the move. Many techniques have been applied over the years in order to minimize these residual vibrations. One such method is known as command shaping, which will construct the input profile so as to avoid exciting the natural frequencies of the system. This work seeks to extend …

Autonomous Android: Autonomous 3d Environment Mapping With Android Controlled Multicopters, Tate Glick Hawkersmith

Masters Theses

Autonomous robots are robotic platforms with a high degree of autonomy, programmed to perform various behaviors or tasks. They can either be semi-autonomous, only operable within the strict confines of their direct environment, or fully autonomous, capable of sensing and navigating their environments without any human interaction.

In this thesis, I focus on fully autonomous robotic platforms, specifically multicopters, controlled by an onboard Android-driven device, a widely available operating system for smartphones and tablets with over 1.4 billion active monthly users worldwide [Callaham 2015]. The main objective of this research is to create a plug and play solution for autonomous …

A Haptic Surface Robot Interface For Large-Format Touchscreen Displays, Mark Price

Masters Theses

This thesis presents the design for a novel haptic interface for large-format touchscreens. Techniques such as electrovibration, ultrasonic vibration, and external braked devices have been developed by other researchers to deliver haptic feedback to touchscreen users. However, these methods do not address the need for spatial constraints that only restrict user motion in the direction of the constraint. This technology gap contributes to the lack of haptic technology available for touchscreen-based upper-limb rehabilitation, despite the prevalent use of haptics in other forms of robotic rehabilitation. The goal of this thesis is to display kinesthetic haptic constraints to the touchscreen user …

Vision-Based Motion For A Humanoid Robot, Khalid Abdullah Alkhulayfi

Dissertations and Theses

The overall objective of this thesis is to build an integrated, inexpensive, human-sized humanoid robot from scratch that looks and behaves like a human. More specifically, my goal is to build an android robot called Marie Curie robot that can act like a human actor in the Portland Cyber Theater in the play Quantum Debate with a known script of every robot behavior. In order to achieve this goal, the humanoid robot need to has degrees of freedom (DOF) similar to human DOFs. Each part of the Curie robot was built to achieve the goal of building a complete humanoid …

Human-Robot Interaction: Proximity And Speed—Slowly Back Away From The Robot!, Keith R. Macarthur, Kimberly Stowers, Peter A. Hancock

Keith Reid MacArthur

Pythagorean Combinations For Lego Robot Building., Ronald I. Greenberg

Computer Science: Faculty Publications and Other Works

This paper provides tips for LEGO robot construction involving bracing or gear meshing along a diagonal using standard Botball kits.

A Simulation-Based Layered Framework Framework For The Development Of Collaborative Autonomous Systems, Ioannis Sakiotis

Computational Modeling & Simulation Engineering Theses & Dissertations

The purpose of this thesis is to introduce a simulation-based software framework that facilitates the development of collaborative autonomous systems. Significant commonalities exist in the design approaches of both collaborative and autonomous systems, mirroring the sense, plan, act paradigm, and mostly adopting layered architectures. Unfortunately, the development of such systems is intricate and requires low-level interfacing which significantly detracts from development time. Frameworks for the development of collaborative and autonomous systems have been developed but are not flexible and center on narrow ranges of applications and platforms. The proposed framework utilizes an expandable layered structure that allows developers to define …

Senior Project: Control System For An Underwater Remotely Operated Vehicle, Tyler Mau, Joseph Mahoney

Computer Engineering

No abstract provided.