Engineering Commons^™

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Project Blipper, Peter Jacobs, Preston Delaware, Ryan Foster

Senior Design Project For Engineers

This project was sponsored by Clorox to design and create an automatic bottle-unscrambling system for possible implementation at their bottling plant in Chile. The objective was to use a robotic arm to unscramble bottles from an incoming conveyor belt and place them upright on an outbound conveyor belt. Throughout the research, design, and testing of solutions for this project, several design alternatives were found for each discipline, and will be presented to Clorox so that they can make an informed decision for how and if they want to move forward with implementation of this project.

The project was split into …

Anisotropic Scaffolds For Peripheral Nerve And Spinal Cord Regeneration, Wen Xue, Wen Shi, Yunfan Kong, Mitchell Kuss, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

The treatment of long-gap (>10 mm) peripheral nerve injury (PNI) and spinal cord injury (SCI) remains a continuous challenge due to limited native tissue regeneration capabilities. The current clinical strategy of using autografts for PNI suffers from a source shortage, while the pharmacological treatment for SCI presents dissatisfactory results. Tissue engineering, as an alternative, is a promising approach for regenerating peripheral nerves and spinal cords. Through providing a beneficial environment, a scaffold is the primary element in tissue engineering. In particular, scaffolds with anisotropic structures resembling the native extracellular matrix (ECM) can effectively guide neural outgrowth and reconnection. In …

Bolted Flanged Assembly Test Stand, Mark Christian Damasco Sunga, Paulina Mercedez Delgado, Philip John Coleman

Mechanical Engineering

The following Final Design Report (FDR) is the last formal documentation for the senior design project. The project was carried out by three senior mechanical engineering students at California Polytechnic State University, San Luis Obispo for Phillips 66. The project proposed was to design a test stand and implement a procedure which will evaluate craftsmen’s abilities to assemble a bolted flanged joint assembly. The goal was to create a fully functional test setup that can be duplicated and utilized throughout Phillips 66’s refineries. This document details the design process that was completed over the course of three quarters, including concept …

Quick Mobile Power Unit Trailer Connections, Patrick A. Beahan, Sam Ali, Eric Allon, Benjamin Robinson

Mechanical Engineering

This Final Design Review document encompasses the entirety of a sponsored senior project which was conducted by a group of four undergraduate mechanical engineers at California Polytechnic University San Luis Obispo. The primary sponsor of this project was Solar Turbines, a subsidiary of Caterpillar Incorporated. Solar Turbines is in the business of development and application of modern-day energy solutions with a large focus on gas powered turbines. Cal Poly acted as a supplemental support of this project and provide the students with mentorship as well as access to its state-of-the-art facilities for the development of an innovative solution to the …

Finisher Alignment Project, Thomas Frye

Chancellor’s Honors Program Projects

No abstract provided.

Electrospinning Approach For The Improvement Of Mechanical And Dielectric Properties Of Anisotropic Nanofiber Mat By Using A Novel Fiber Alignment Technique, Blesson Isaac

Mechanical and Aerospace Engineering Dissertations

Many advanced applications, including aerospace, can benefit from materials with superior mechanical and dielectric properties. For these applications, most fiber alignment electrospinning research has focused on either mechanical property improvement or dielectric property improvement, but not both simultaneously. Through an improved apparatus design and system parameter optimization, this work develops an electrospinning apparatus that produces an increased electrostatic force and more tightly controlled discharged particle path to enable a more uniform distribution and higher degree of alignment in deposited electrospun material, which results in simultaneous improvement of both mechanical and dielectric properties. The current state-of-the-art in aligned electrospinning techniques are …

Universal Fixture For Orbital Tube Welding, Kevin P. Mcgowan, William Divittorio, Jesse Castaneda

Mechanical Engineering

No abstract provided.

Optimizing The Telescope Assembly Alignment Simulator For Sofia, Zoe E. Sharp, Alex Quyenvo, Jennifer Briggs, Brian Eney

STAR Program Research Presentations

The Stratospheric Observatory for Infrared Astronomy (SOFIA) conducts research on a modified Boeing 747sp aircraft. By using a variety of infrared science instruments mounted on a 2.7 meter telescope, researchers can make discoveries about the galactic center, star formation, and various topics associated with a deeper understanding of our universe. To efficiently collect data through the SOFIA instruments, the instruments must be tested and prepared prior to being placed on the aircraft. Therefore, with the use of the Telescope Assembly Alignment Simulator (TAAS), researchers can design and construct improvements needed for these instruments to efficiently perform while in flight. The …

Carbon-Based Hierarchical Scaffolds For Myoblast Differentiation: Synergy Between Nano-Functionalization And Alignment, Akhil Patel, Shilpaa Mukundan, Wenhu Wang, Anil K. Karumuri, Vinayak Sant, Sharmila M. Mukhopadhyay, Shilpa Sant

Mechanical and Materials Engineering Faculty Publications

While several scaffolds have been proposed for skeletal muscle regeneration, multiscale hierarchical scaffolds with the complexity of extracellular matrix (ECM) haven’t been engineered successfully. By precise control over nano- and microscale features, comprehensive understanding of the effect of multiple factors on skeletal muscle regeneration can be derived. In this study, we engineered carbon-based scaffolds with hierarchical nano- and microscale architecture with controlled physico-chemical properties. More specifically, we built multiscale hierarchy by growing carbon nanotube (CNT) carpets on two types of scaffolds, namely, interconnected microporous carbon foams and aligned carbon fiber mats. Nanostructured CNT carpets offered fine control over nano-roughness and …

Passive Alignment Of Micro-Fluidic Chips Using The Principle Of Elastic Averaging, Sitanshu Gurung

LSU Master's Theses

This thesis presents a novel design for a passive alignment feature for vertically stacking chips in a micro fluidic device. Each chip is the size of a standard microscopic slide (75mm—25mm) and is a highly specialized functional unit designed and fabricated to process fluidic samples. The fluidic samples in the device flows from one chip to another using inter connecting holes 500μm-100μm in diameter. Hence an alignment of better than 100μm between chips is necessary to allow for the interconnecting holes to overlap so as to provide with a path for the fluid to flow. The feature to be used …