Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- Catalytic activity (2)
- Glucose electro-oxidation (2)
- Stability (2)
- Aerogel (1)
- Aerosols (1)
-
- Amine scrubbing (1)
- Ammonia emission (1)
- Analytical chemistry (1)
- Atmospheric chemistry (1)
- Au (1)
- Automotive exhaust (1)
- Carbon monoxide (1)
- Catalyst (1)
- Catalytic converter (1)
- Chromia (1)
- Chromium (1)
- Coal (1)
- Coal combustion (1)
- Correlation intensity index (1)
- CuOx (1)
- Direct formic acid fuel cells (1)
- Drones (1)
- Dye removal (1)
- Electrocatalysis (1)
- Electrodeposition potential (1)
- Emission (1)
- Flue gas (1)
- Formic acid electro−oxidation (1)
- Fuel cells (1)
- Glucose electro-oxidation; Ni; Au; Catalytic activity; Stability (1)
- Publication
- Publication Type
Articles 1 - 13 of 13
Full-Text Articles in Engineering
The Aging And Impacts Of Atmospheric Soot: Closing The Gap Between Experiments And Models, Ogochukwu Yvonne Enekwizu
The Aging And Impacts Of Atmospheric Soot: Closing The Gap Between Experiments And Models, Ogochukwu Yvonne Enekwizu
Dissertations
The main goal of this dissertation is to generate data and parameterizations to accurately represent soot aerosols in atmospheric models. Soot from incomplete combustion of fossil fuels and biomass burning is a major air pollutant and a significant contributor to climate warming. The environmental impacts of soot are strongly dependent on the particle morphology and mixing state, which evolve continuously during atmospheric transport via a process known as aging. To make predictions of soot impacts on the environment, most atmospheric models adopt simplifications of particle structure and mixing state, which lead to substantial uncertainties. Using an experimentally constrained modeling approach, …
Application Of A Small Unmanned Aerial System To Measure Ammonia Emissions From A Pilot Amine-Co2 Capture System, Travis J. Schuyler, Bradley Irvin, Keemia Abad, Jesse G. Thompson, Kunlei Liu, Marcelo I. Guzman
Application Of A Small Unmanned Aerial System To Measure Ammonia Emissions From A Pilot Amine-Co2 Capture System, Travis J. Schuyler, Bradley Irvin, Keemia Abad, Jesse G. Thompson, Kunlei Liu, Marcelo I. Guzman
Chemistry Faculty Publications
The quantification of atmospheric gases with small unmanned aerial systems (sUAS) is expanding the ability to safely perform environmental monitoring tasks and quickly evaluate the impact of technologies. In this work, a calibrated sUAS is used to quantify the emissions of ammonia (NH3) gas from the exit stack a 0.1 MWth pilot-scale carbon capture system (CCS) employing a 5 M monoethanolamine (MEA) solvent to scrub CO2 from coal combustion flue gas. A comparison of the results using the sUAS against the ion chromatography technique with the EPA CTM-027 method for the standard emission sampling of NH3 …
Development Of Catalytic Chromia-Based Aerogels, Fiona Fitzgerald
Development Of Catalytic Chromia-Based Aerogels, Fiona Fitzgerald
Honors Theses
Over one billion automobiles are in use around the world, the majority of which employ internal combustion engines. Catalytic converters are used to convert the toxic compounds found in car exhaust -- carbon monoxide, nitrogen oxides (NOx) and hydrocarbons -- to less harmful gases. The typical catalytic converter employs as catalysts expensive raw materials (platinum, palladium and/or rhodium) wash-coated onto an alumina-based ceramic substrate. Aerogel materials have high surface area and thermal stability, properties that make them attractive for catalysis applications. Aerogels made with transition metal oxides are candidates to replace platinum in the catalytic converter. Chromium oxide (chromia) materials …
Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Aya S. Abdulhalim Eng
Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Aya S. Abdulhalim Eng
Chemical Engineering
This study aims at the sequential assembling of a nickel oxide (NiOx: cauliflower-like nanostructure, 90 nm) and gold (Au; spherical, 95 nm in an average particle size) onto the GC surface nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Au/GC) for the glucose electro−oxidation (GO); the principal anodic reaction in the direct glucose fuel cells (DGFCs). The charge of the Ni deposition on the GC surface (will be abbreviated as Ni/GC electrode) was initially optimized to obtain the highest catalytic activity toward GO which attained at (339.8 Ag−1) by applying 15 mC in the Ni deposition. Yet, …
Surface Reservoirs Dominate Dynamic Gas-Surface Partitioning Of Many Indoor Air Constituents, Chen Wang, Douglas B. Collins, Caleb Arata, Allen H. Goldstein, James M. Mattila, Delphine K. Farmer, Laura Ampollini, Peter F. Decarlo, Atila Novoselac, Marina E. Vance, William W. Nazaroff, Jonathan P.D. Abbatt
Surface Reservoirs Dominate Dynamic Gas-Surface Partitioning Of Many Indoor Air Constituents, Chen Wang, Douglas B. Collins, Caleb Arata, Allen H. Goldstein, James M. Mattila, Delphine K. Farmer, Laura Ampollini, Peter F. Decarlo, Atila Novoselac, Marina E. Vance, William W. Nazaroff, Jonathan P.D. Abbatt
Faculty Journal Articles
Human health is affected by indoor air quality. One distinctive aspect of the indoor environment is its very large surface area that acts as a poorly characterized sink and source of gas-phase chemicals. In this work, air-surface interactions of 19 common indoor air contaminants with diverse properties and sources were monitored in a house using fast-response, on-line mass spectrometric and spectroscopic methods. Enhanced-ventilation experiments demonstrate that most of the contaminants reside in the surface reservoirs and not, as expected, in the gas phase. They participate in rapid air-surface partitioning that is much faster than air exchange. Phase distribution calculations are …
Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Mahmoud M. Abuzaied Eng
Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Mahmoud M. Abuzaied Eng
Chemical Engineering
The aim of this study is to fabricate a nickel (NiOx) and copper (CuOx) oxide nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Cu/GC) for glucose oxidation (GO). A sequential electrodepositon mode was applied to assemble NiOx and CuOx in the fabrication scheme. The optimization of Ni loading on the GC surface (will be abbreviated as Ni/GC electrode) was achieved first to attain the maximum catalytic efficiency in terms of the specific current toward GO. This (409 Ag-1)was obtained by applying 15 mC/cm2 in the deposition of Ni. However, unfortunately the NiOx/GC could not …
Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Islam M. Al-Akraa, Aya S. Abdulhalim Eng, Yassr M. Asal Mr, Ahmad M. Mohammad Prof
Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Islam M. Al-Akraa, Aya S. Abdulhalim Eng, Yassr M. Asal Mr, Ahmad M. Mohammad Prof
Chemical Engineering
This study aims at the sequential assembling of a nickel oxide (NiOx: cauliflower-like nanostructure, 90 nm) and gold (Au; spherical, 95 nm in an average particle size) onto the GC surface nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Au/GC) for the glucose electro−oxidation (GO); the principal anodic reaction in the direct glucose fuel cells (DGFCs). The charge of the Ni deposition on the GC surface (will be abbreviated as Ni/GC electrode) was initially optimized to obtain the highest catalytic activity toward GO which attained at (339.8 Ag−1) by applying 15 mC in the Ni deposition. Yet, …
A Spin-Coated Tiox/Pt Nanolayered Anodic Catalyst For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad Prof
A Spin-Coated Tiox/Pt Nanolayered Anodic Catalyst For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad Prof
Chemical Engineering
The CO poisoning of the platinum anodic catalyst which typically functions the catalytic deterioration of the direct formic acid fuel cells could be minimized with a simple modification for Pt with titanium oxide. The fabrication scheme involved the spin-coating of a Ti precursor onto a Pt thin layer that was physically sputtered onto a Si substrate. The whole assembly was subjected to a post-annealing processing to produce the TiOx layer (60 nm) in a porous structure (mostly Anatase) atop of the Pt surface. The porous nature of the TiOx layer permitted the participation of Pt in the electrocatalysis of the …
Advancement Of Predictive Modeling Of Zeta Potentials (Ζ) In Metal Oxide Nanoparticles With Correlation Intensity Index (Cii), Andrey A. Toropov, Natalia Sizochenko, Alla P. Toropova, Danuta Leszczynska, Jerzy Leszczynski
Advancement Of Predictive Modeling Of Zeta Potentials (Ζ) In Metal Oxide Nanoparticles With Correlation Intensity Index (Cii), Andrey A. Toropov, Natalia Sizochenko, Alla P. Toropova, Danuta Leszczynska, Jerzy Leszczynski
Articles
It was expected that index of the ideality of correlation (IIC) and correlation intensity index (CII) could be used as possible tools to improve the predictive power of the quantitative model for zeta potential of nanoparticles. In this paper, we test how the statistical quality of quantitative structure-activity models for zeta potentials (ζ, a common measurement that reflects surface charge and stability of nanomaterial) could be improved with the use of these two indexes. Our hypothesis was tested using the benchmark data set that consists of 87 measurements of zeta potentials in water. We used quasi-SMILES molecular representation to take …
Applications Of Drones In Atmospheric Chemistry, Travis J. Schuyler
Applications Of Drones In Atmospheric Chemistry, Travis J. Schuyler
Theses and Dissertations--Chemistry
The emission of greenhouse gases (GHGs) has changed the composition of the atmosphere during the Anthropocene. A major technical and scientific challenge is quantifying the resulting fugitive trace gas fluxes under variable meteorological conditions. Accurately documenting the sources and magnitude of GHGs emission is an important undertaking for discriminating contributions of different processes to radiative forcing. Therefore, the adverse environmental and health effects of undetected gas leaks motivates new methods of detecting, characterizing, and quantifying plumes of fugitive trace gases. Currently, there is no mobile platform able to quantify trace gases at altitudes(UASs), or drones, can be deployed on-site in …
Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Islam M. Al-Akraa, Mahmoud M. Abouzaid Eng, Yaser M. Asal Mr, Ahmad M. Mohammad Prof
Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Islam M. Al-Akraa, Mahmoud M. Abouzaid Eng, Yaser M. Asal Mr, Ahmad M. Mohammad Prof
Chemical Engineering
The aim of this study is to fabricate a nickel (NiOx) and copper (CuOx) oxide nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Cu/GC) for glucose oxidation (GO). A sequential electrodepositon mode was applied to assemble NiOx and CuOx in the fabrication scheme. The optimization of Ni loading on the GC surface (will be abbreviated as Ni/GC electrode) was achieved first to attain the maximum catalytic efficiency in terms of the specific current toward GO. This (409 Ag1)was obtained by applying 15 mC/cm2 in the deposition of Ni. However, unfortunately the NiOx/GC could not support a long-term …
Effect Of The Electrodeposition Potential Of Platinum On The Catalytic Activity Of A Pt/Gc Catalyst Toward Formic Acid Electro−Oxidation, Islam M. Al-Akraa, Bilquis A. Al-Qodami Ms., Ahmad M. Mohammad Prof
Effect Of The Electrodeposition Potential Of Platinum On The Catalytic Activity Of A Pt/Gc Catalyst Toward Formic Acid Electro−Oxidation, Islam M. Al-Akraa, Bilquis A. Al-Qodami Ms., Ahmad M. Mohammad Prof
Chemical Engineering
The electrocatalytic activity of platinum (Pt)–modified glassy carbon (GC) (referred as Pt/GC) electrodes toward the formic acid electro−oxidation (FAO) was investigated. The Pt deposition on the GC substrate was carried out by a potentiostatic technique at different potentials (from 0.2 V to −0.2 V vs. Hg/Hg2Cl2/KCl (sat.) reference electrode) and the corresponding influence on the catalytic activity toward FAO was monitored. The electrocatalytic inspection revealed a potential role for the Pt deposition potential in boosting the catalytic efficiency of the catalyst toward FAO and further in mitigating the CO poisoning that eventually deactivate the catalyst. Interestingly, the highest activity toward …
Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr
Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr
Chemical Engineering
The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …