Education Commons^™

The Effects Of Emerging Technology On Healthcare And The Difficulties Of Integration, Skyler J. Pavlish-Carpenter

Honors Undergraduate Theses

Background: Disruptive technology describes technology that is significantly more advanced than previous iterations, such as: 3D printing, genetic manipulation, stem cell research, innovative surgical procedures, and computer-based charting software. These technologies often require extensive overhauls to implement into older systems and must overcome many difficult financial and societal complications before they can be widely used. In a field like healthcare that makes frequent advancements, these difficulties can mean that the technology will not be utilized to its full potential or implemented at all.

Objective: To determine the inhibiting factors that prevent disruptive technology from being implemented in conventional healthcare.

Methods: …

Education Leadership Perspectives: Positve Ways, Iwasan D. Kejawa Ed.D

Department of Educational Administration: Faculty Publications

Are outdated traditional education, information technological infrastructure, problematic issues in providing quality leadership education in many of our instittutions today? With this into considerations, are these issues vital in order to stabilize the political and economic embroidery of our institutions or organizations, and its psychological and sociological awareness? What are really to be taught in our institutions to educate the present and the future leaders in the society? It is found that education may be the training of the mind to perform desire functions or to perpetuate the modality of obtaining an end or result. Actually, the accessibility of leadership …

Impacts Of Professional Development In Integrated Stem Education On Teacher Self-Efficacy, Outcome Expectancy, And Stem Career Awareness, John Geoffrey Knowles

Purdue Polytechnic Doctoral Dissertations

This research analyzed the effects of teacher professional development and lesson implementation in integrated Science, Technology, Engineering, and Math (STEM) on: 1.) Teacher self-efficacy and their confidence to teach specific STEM subjects; 2.) Teaching outcome expectancy beliefs concerning the impact of actions by teachers on student learning; and 3.) Teacher awareness of STEM careers. High school science and technology education teachers participating in the Teachers and Researchers Advancing Integrated Lessons in STEM (TRAILS) project experimental group attended a ten-day summer professional development institute designed to educate teachers in using an integrated STEM education model to implement integrated STEM lessons. The …

Designing The Technological World Through Biomimicry, Emily Yoshikawa, Greg J. Strimel, Scott R. Bartholomew

Faculty Publications

Scientific discoveries are a driver for advancing our technological world (ITEA/ITEEA; 2000/2002/2007). As more knowledge is acquired through scientific inquiry, people can better design and develop technological inventions and innovations (Knowles, Kelley, & Hurd, 2016). In turn, these novel technologies can aid in making new scientific discoveries, thus driving an ongoing cycle of technological advancement. However, in the process of designing and advancing our technological world, people can turn to the study of life and its phenomena to inspire and inform their designs. Nature is functional as well as beautiful. As we study the phenomena or functions of living organisms …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Kate Perkins

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Lifelong Learning: A Strategic Analysis Of Education, Iwasan D. Kejawa Ed.D

Department of Teaching, Learning, and Teacher Education: Faculty Publications

Are outdated traditional education, distance education, information technological infrastructure, partnerships and financial resources common problematic issues facing many of the educational institutions in our world today? With this into considerations, are these issues vital in order to stabilize the political and economic embroidery of an institution or organization, and its psychological and sociological awareness? What is it that is to be learned and thought in our institutions and, what really is lifelong education; and how is to be carried out in the society of ours? It is found that education may be the training of the mind to perform desire …

Computer Science Technology Education: An Incredible Explosion, Iwasan D. Kejawa

School of Computing: Faculty Publications

This paper explore what computers are, their usages and their functionalities. Computers can be used to learn or comprehend the understanding of all subjects, be it physics aerobics, swimming, biology, mathematics, agriculture, chemistry, business administration or commerce, just to name a few. In education, computers are used to project information to individuals in the classrooms or anywhere education is taking place, in churches, homes, schools, conference halls and so on. It is also used to convey the logic of a subject or behind a topic. Computers play an important role in educating our mind. With the usage of computers, we …

Middle School Student Habits, Perceptions, And Self-Directed Learning, Scott R. Bartholomew

Faculty Publications

Today’s students are growing up in a digital world with constant connectivity, instant access to information, and new technological developments at every turn. The feasibility, effectiveness, and possibilities of students leveraging technological tools around them for learning are the subject of continual debate (Becker, 2017; Bowen, 2012; Tamim, Bernard, Borokhovski, Abrami, & Schmid, 2011). In this study, 706 middle school students from 18 classes worked in groups of 2-3 to complete an open-ended engineering design challenge. Students completed design portfolios and constructed prototypes in their groups in response to the design challenge. Classes were divided with some receiving access to …

Internet Of Things, John Ritz, Zane Knaack

STEMPS Faculty Publications

The internet has not only made information searching and instantaneous communications possible, it has also expanded the development of smart products that can be connected and controlled over the internet. Automobile manufacturers have used these devices during the past decade to make cars safer and assist drivers with updated information on vehicle operation. Today many more products can be operated and controlled from a smartphone or computer. Depending on your level of desired internet-connectedness, many home products are coming to the market with IoT connectivity. Much data is being collected and acted upon through databases. These developments should enable machines …

From Mechanic To Designer: Evolving Perceptions Of Elementary Students Over Three Years Of Engineering Instruction, Anastasia M. Rynearson

Open Access Dissertations

Due in part to increasing state standards that require engineering in K-12 curricula and the Next Generation Science Standards’ incorporation of engineering outcomes, inclusion of engineering into elementary classrooms is on the rise. Teacher development and experiences in learning about and implementing engineering have been studied, but elementary students’ experiences when learning about engineering have not been explored.

The purpose of this study is to address the question: How do elementary students’ knowledge of, attitudes toward, and overall conceptions of engineering evolve over three years of engineering instruction?

This study follows seven elementary school students through three years of engineering …

Infographic: Stem Workforce And Careers, Jo Earp

Teacher infographics

School educators are being encouraged to give students more information about STEM-related careers. So, what are the top occupations of STEM graduates? Find out in this Teacher infographic.

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Dr Daniel Edwards

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Dr Jacob Pearce

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Ieee Istas13- People As Sensors: The Social Implications Of Living In A Smart World, Alexander Hayes, Katina Michael, Nick Rheinberger

Alexander Hayes Mr.

What is the technological trajectory of people wearing sensors? What are the benefits, risks and costs? What is the vibe going to be like at ISTAS13 with people like Marvin Minsky and Ray Kurzweil attending? What do you hope to gain from the meeting? Can we foresee a time that all glasses will be embedded with sensors? What are the implications? E.g. in the higher education sector? What about the gathering of evidence by law enforcement? What is point of eye?

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Higher education research

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Creation Of A Portable, 3d-Printable, Iphone-Compatible Spectrophotometer, Elise K. Grasse

Williams Honors College, Honors Research Projects

Spectroscopy is a widely used chemical and medical analysis tool. While spectrophotometers are commonly found in many universities and laboratories, they are not available to all high schools or laboratories in developing countries. The objective of this project was to design a high-quality, 3D-printable, iPhone-compatible spectrophotometer that uses a cell phone camera and interface to collect data. The created 3D-print file will be available to anyone with access to a 3D printer which are increasingly found in many laboratories and schools across the country. A low cost pre-printed kit will also be made for those without access to a 3D …

Teacher Influence On Elementary School Students’ Participation In Science, Technology, Engineering, And Mathematics, Courtney Hartman

Honors College Theses

The purpose of this study is to explore the influence of elementary school teachers on encouraging students’ interest and participation in Science, Technology, Engineering, and Mathematics. The researcher sought to understand what methods teachers use in their classrooms to encourage students to participate in STEM subjects and programs. This mixed methods study consisted of a questionnaire to collect quantitative data, as well as an interview of selected teachers who participated in the questionnaire to collect qualitative data. The data was analyzed to determine the overall perceptions of teachers regarding the importance of encouraging students to participate in STEM. The qualitative …

Towards Digital Art In Information Society, Montse Arbelo, Joseba Franco

CLCWeb: Comparative Literature and Culture

In their article "Towards Digital Art in Information Society" Montse Arbelo and Joseba Franco propose the development of the platform of a Network of Experimental Centers be formed by small groups of people who are qualified and who seek optimal operational effectiveness and who dedicate their resources to the production of digital content and we offer artechmedia <http://www.artechmedia.org> as a base point of departure. Such an international network in a collaborative structure based on national networks would make possible to coordinate existing resources to develop social networks, generate and promote content, engage in forums of discussion and creativity workshops, and …

Engineering Design: A Cognitive Process Approach, Greg Joseph Strimel

STEMPS Theses & Dissertations

The intent of this dissertation was to identify the cognitive processes used by advanced pre-engineering students to solve complex engineering design problems. Students in technology and engineering education classrooms are often taught to use an ideal engineering design process that has been generated mostly by educators and curriculum developers. However, the review of literature showed that it is unclear as to how advanced pre-engineering students cognitively navigate solving a complex and multifaceted problem from beginning to end. Additionally, it was unclear how a student thinks and acts throughout their design process and how this affects the viability of their solution. …

Interpreting, Stephanie Jo Kent

Doctoral Dissertations

What do community interpreting for the Deaf in western societies, conference interpreting for the European Parliament, and language brokering in international management have in common? Academic research and professional training have historically emphasized the linguistic and cognitive challenges of interpreting, neglecting or ignoring the social aspects that structure communication. All forms of interpreting are inherently social; they involve relationships among at least three people and two languages. The contexts explored here, American Sign Language/English interpreting and spoken language interpreting within the European Parliament, show that simultaneous interpreting involves attitudes, norms and values about intercultural communication that overemphasize information and discount …

Fearless Friday: Kirsten Crear, Kirsten Crear

SURGE

Even in her last semester here at Gettysburg, Kirsten Crear ’14 is fearlessly working to make changes for the future of the campus community. This semester, Kirsten introduced a STEMinists club on campus that will give female students who are STEM (an acronym for Science-Technology-Engineering-Mathematics) majors the opportunity to come together and create a community, share and discuss the difficulties they face as women in their fields of study, and support and mentor each other as they prepare to enter their fields.

Kirsten is passionate, driven, and determined, taking the initiative to bring this group of women together on campus …

Teaching Laboratory Courses Using Distance Learning Technologies, Steve C. Hsiung, John Ritz

Engineering Technology Faculty Publications

Conducting laboratory activities is essential for teaching and learning in engineering and technology subjects. This article discusses explorations made by a research team to find solutions to enable the distance-learning delivery of laboratory courses on embedded microcontroller technology topics. In addition, this article includes a review of videoconferencing and course management tools, uniquely designed laboratory equipment and supporting curriculum materials, and statistical evidence showing students can learn technical laboratory content in distance-learning environments.

Technology And Engineering Education Doctoral Students' Perceptions Of Their Profession, Gene Martin, John Ritz, Michael Kosloski

STEMPS Faculty Publications

The growth and vitality of both technology and engineering education professions rely on the quality of contributions of its new and emerging leaders. Many of these leaders are currently enrolled students in doctoral programs. These students will be challenged to assume leadership roles in which they are not currently engaged (Ehrenberg, Jakubson, Groen, So, & Price, 2007). Some students may choose to focus their careers in developing new curricula; some will become active in grant writing and grant procurement some will choose to serve as officers in their professional organizations; and others will contribute to the body of literature in …

Integrating Technology And Engineering In A Stem Context, Barry N. Burke, Philip A. Reed, John G. Wells, Robert E. Yager (Ed.), Herbert Brunkhorst (Ed.)

STEMPS Faculty Publications

(First paragraph) Imagine students entering the classroom with an enthusiasm that cannot be contained. They come from all walks of life and with different experiences and backgrounds and are eager to engage in learning. Inspiration and innovation are on their mind. What they learned in their science and math classes is now being applied in another class they take called Technology and Engineering. Opportunity is what they see for their future. Something about connecting all the dots from all their classes propels them to change their outlook, to get involved, to get excited about school and to envision their future.

Toward A Closer Integration Of Law And Computer Science, Christopher S. Yoo

All Faculty Scholarship

Legal issues increasingly arise in increasingly complex technological contexts. Prominent recent examples include the Stop Online Piracy Act (SOPA) and the Protect Intellectual Property Act (PIPA), network neutrality, the increasing availability of location information, and the NSA’s surveillance program. Other emerging issues include data privacy, online video distribution, patent policy, and spectrum policy. In short, the rapid rate of technological change has increasingly shown that law and engineering can no longer remain compartmentalized into separate spheres. The logical response would be to embed the interaction between law and policy deeper into the fabric of both fields. An essential step would …

Increasing National Space Engineering Productivity And Educational Opportunities Via Intrepreneurship, Entrepreneurship And Innovation, Jeremy Straub

Jeremy Straub

Research and educational efforts related to space engineering or requiring access to space face significant startup costs. The cost of developing a 1-U (10 cm × 10 cm × 11 cm) CubeSat from scratch can be approximately $250,000. Those buying a kit must pay amortized vendor development costs on a per-mission basis, creating a lower per-mission barrier. Kit users are also constrained by being unable to make changes to vendor subsystems without incurring substantial redevelopment costs or vendor charges. The Open Prototype for Educational NanoSats (OPEN) is changing this by providing freely available design documents for a 1-U CubeSat class …

Visual Literacy And The Integration Of Parametric Modeling In The Problem-Based Curriculum, Matthew Benedict Assenmacher

Master's Theses and Doctoral Dissertations

This quasi-experimental study investigated the application of visual literacy skills in the form of parametric modeling software in relation to traditional forms of sketching. The study included two groups of high school technical design students. The control and experimental groups involved in the study consisted of two randomly selected groups of students. The participants were exposed to eight weeks of technical drawing and parametric modeling instruction prior to the start of the study.

The potential applications of emerging technologies for the purpose of integrating visual literacy into the curriculum are not fully understood. Society is moving towards a more immediate …

An Interactive Exploration Of Gender And Engineering: Unpacking The Experience, Debbie Chachra, Lynn Stein, Alisha Sarang-Sieminski, Caitrin Lynch, Yevgeniya Zastavker

Alisha L. Sarang-Sieminski

The engineering student experience is understood to differ for male and female students; gendered interactions affect the development of academic and professional role confidence, as well as engineering identity. The purpose of this session is twofold. First, we aim to introduce participants to concepts of gender schemas, privilege, and identity using a range of interactive activities, including brainstorming and structured discussion. Second, we intend to share information about and obtain feedback on a Gender Discussion Exploration Kit, which the participants will be encouraged to review, use, and share at their home institutions.

Defining Characteristics Of An Integrated Stem Curriculum In K-12 Education, Vinson Robert Carter

Graduate Theses and Dissertations

The purpose of the study was to obtain consensus concerning the defining characteristics of integrated STEM (Science, Technology, Engineering, and Mathematics) curriculum. This study utilized a three round modified Delphi study to solicit recommendations from experts of STEM education in order to: 1) create a set of categorical and defining curricular components needed to develop and implement appropriate integrated STEM curriculum; 2) identify the characteristics that set integrated STEM education curriculum apart from single-discipline curricula; 3) discuss the components necessary to gauge whether an initiative, project, or curriculum should be referred to as integrated STEM education; and 4) examine whether …

Why Do Indiana Pre-Service Technology Education Majors Choose The Profession, Traves L. Freeland

Purdue Polytechnic Masters Theses

The purpose of this descriptive study was to look at the factors that influence pre-service technology education majors to choose to become teachers. The pre-service teachers of three Indiana technology education teacher preparatory programs were given an internet survey to collect demographic data and determine what factors influence current pre-service teachers. The results of this study were compared to the results from a study done by Harris (2007). The findings resulted in similar factors that were the most common identified as being influential. Those factors included personal interest or hobbies, high school or middle school teacher, and past experiences in …