Education Commons^™

Technology Criticism And Data Literacy: The Case For An Augmented Understanding Of Media Literacy, Thomas Knaus

Journal of Media Literacy Education

Reviewing the history of media literacy education might help us to identify how creating media as an approach can contribute to fostering knowledge, understanding technical issues, and to establishing a critical attitude towards technology and data. In a society where digital devices and services are omnipresent and decisions are increasingly based on data, critical analysis must penetrate beyond the “outer shell” of machines – their interfaces – through the technology itself, and the data, and algorithms, which make these devices and services function. Because technology and data constitute the basis of all communication and collaboration, media literate individuals …

Comparison Of Pre-Intervention Idi Results From Stem And Non-Stem Undergraduate Students, Anne M. Lucietto, Liza Russell

Journal of Global Education and Research

The emphasis on intercultural competence is more prevalent in STEM (Science, Technology, Engineering and Mathematics) majors as the world shifts towards a more globalized economy. When entering higher education, students have differing levels of cultural interaction due to varying peer interaction, family experiences, international travel, and social media experiences. The Intercultural Development Inventory (IDI) has been used to develop an understanding of how students view others and the level of skills they have to interact and adapt to other cultures. Using published data focused on pre-intervention assessment, researchers compared it to data obtained from STEM students preparing for an international …

Nature Of Problem-Solving Skills For 21st Century Stem Learners: What Teachers Need To Know, Paul Nnanyereugo Iwuanyanwu

Journal of STEM Teacher Education

Since the emergence of the fourth industrial revolution which calls for a new model of learning for the twenty-first century learners, it has been argued that the nature of problems that learners must solve in science, technology, engineering and mathematics (STEM) must also be transformed to enable new forms of learning skills that are needed to tackle complex global challenges. However, the question of how best to teach these skills purposefully and explicitly is largely overlooked. STEM education reformers recognize that the lecture method or traditional method of teaching is highly ineffective for teaching twenty-first century competencies and skills that …

Standards For Technological And Engineering Literacy: Addressing Trends And Issues Facing Technology And Engineering Education, Johnny J. Moye, Philip A. Reed

STEMPS Faculty Publications

The article offers information on addressing trends and issues facing technology and engineering education. It mentions future challenges, students need to "have a broad conceptual understanding of technology and its place in society, enabling them to be active participants in the technological world and careful creators and users of technology.

التعليم الهندسي ومتطلبات سوق العمل برامج هندسة القوى الكهربائية كحالة دراسة, Salah Abdlsattar, Fathi Allayth, Kamel Shoush

Al Jinan الجنان

The University has an important role in society in three main axes; education, scientific research and community services where the progress of nations is measured with its strength, the degree of preparation, and kept abreast of the requirements of the times. Because of the fact that the university is made up - at the end - of study plans and programs and also in order to overcome to compete with graduates locally, regionally and internationally, the most important functions of the university asa whole and departments in particular are the preparation of strong plans and study programs for all disciplines …

Method Of Joints: Theory And Practice Of Designing, Building, And Testing Trusses, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The authors of this article, like many of us, are proponents of engineering education but are also proponents of shop skills, craftsmanship, technological literacy, and the tacit knowledge and skills developed through applying sound theories during practical hands-on learning. The authors believe that engineering is an important aspect of our discipline, but so are the application of thinking, tool skills, measurement, geometric construction, manufacturing, instrumentation, testing and analysis, mathematical and scientific theories, and many other hands-on, minds-on skillsets that all need to maintain association with our discipline. As the authors are proponents for engineering education that is done well, they …

Using Schema Training To Facilitate Students' Understanding Of Challenging Engineering Concepts In Heat Transfer And Thermodynamics, Dazhi Yang, Ruth Streveler, Ronald L. Miller, Inanc Senocak, Jim Slotta

Educational Technology Faculty Publications and Presentations

Background: Chi and colleagues have argued that some of the most challenging engineering concepts exhibit properties of emergent systems. However, students often lack a mental framework, or schema, for understanding emergence. Slotta and Chi posited that helping students develop a schema for emergent systems, referred to as schema training, would increase the understanding of challenging concepts exhibiting emergent properties.

Purpose: We tested the effectiveness of schema training and explored the nature of challenging concepts from thermodynamics and heat transfer. We investigated if schema training could (a) repair misconceptions in advanced engineering students and (b) prevent them in beginning engineering students. …

Elementary Teachers’ Mental Images Of Engineers At Work, Rebekah Hammack, Juliana Utley, Toni Ivey, Karen High

Journal of Pre-College Engineering Education Research (J-PEER)

The purpose of the current study was to determine the impacts of a multiple-day engineering-focused professional development program on elementary teachers’ perceptions of the work of engineers and their use of mathematics and science. Data were collected in the form of drawings of engineers prior to and immediately after the professional development program as well as an open-ended exit survey at the end of the program. Participants’ drawings were scored in the following areas: use of mathematics, use of science, and work of an engineer. Wilcoxon signed-rank tests revealed that the only significant change between measures was in ‘‘work of …

The Importance Of Collaborative Design For Narrowing The Gender Gap In Engineering: An Analysis Of Engineering Identity Development In Elementary Students, Mandy Mclean, Jasmine M. Nation, Alexis Spina, Tyler Susko, Danielle Harlow, Julie Bianchini

Journal of Pre-College Engineering Education Research (J-PEER)

Research suggests that, to narrow the gender gap in engineering, we should focus on helping young girls identify with engineering both because gendered attitudes emerge around kindergarten and because identity is more predictive than performance on persistence in the field. This qualitative study sought to understand the impact of collaborative engineering design on the development of engineering identities in elementary-school students and compared the findings across gender. We focused on three tiers of collaboration embedded into the engineering design process: peer groups, role models, and shared goals. More specifically, the elementary students worked in small teams and partnered with undergraduate …

Possible Self Dynamics Of Community College Students Engaged In 3d Printing In Informal Environments, Lawrence Ralph Nightingale Jr.

Educational Foundations & Leadership Theses & Dissertations

The overall number of students from diverse backgrounds and women that graduate from community college with degrees in high paying Science Technology Engineering and Mathematics (STEM) disciplines is unacceptably low. The number of opportunities to gain exposure to STEM-based expressions of technology to overcome the dearth of exposure in high school is limited in community college. 3D Printing uses computer-controlled machines to build physical objects one layer at a time starting from the bottom up. The computer-controlled nature of 3D Printing provides a low risk, low cost platform to exercise elements of computer programming and engineering.

This study was a …

National Summer Transportation Institute: Increasing Career Awareness In Civil Engineering For Underserved High School Students, Melanie L. Villatoro, Janet Liou-Mark

Publications and Research

Our nation needs to increase the number of students pursuing degrees in the fields of Science, Technology, Engineering, and Mathematics (STEM) and those leading to transportation-related careers. In order to meet the demand for qualified graduates in transportation, it is necessary to diversify the pool of students entering college with an interest in these fields. The National Summer Transportation Institute (NSTI) is an educational initiative developed by the Federal Highway Administration (FHWA) and Department of Transportation (DOT). The NSTI at City Tech was designed to increase awareness of transportation-related careers among New York City high school students. The structure of …

Breaking Down The Silos: Innovations For Multidisciplinary Programs, Jillana Finnegan, Donna C. Llewellyn

University Author Recognition Bibliography: 2020

Universities, colleges and academic departments acknowledge the need for more collaborative, multidisciplinary, entrepreneurial, and global education. Unfortunately, this is no trivial task. Centuries of tradition have produced institutional silos, reinforced by layers of policy and cultural differences between academic departments, between colleges, and between academic and non-academic units. Successful multidisciplinary programs require programmatic and administrative innovation that meet faculty, student and institutional needs and leverage available resources. The Vertically Integrated Project (VIP) model, in place at thirty-seven institutions, has achieved notable success in these areas. This paper profiles innovations from ten VIP Programs in three areas: institutional organization, program organization, …

Revolutionizing The Mechanical Engineering Undergraduate Curriculum, Shelby Ann Mcneilly, Krishna Pakala, Donald Plumlee

Mechanical and Biomedical Engineering Faculty Publications and Presentations

As the age of technological advancement and occupational opportunity continues to progress, companies must be constantly adjusting and transforming in order to accommodate industry demands. With these quickly developing requirements comes an expectation of employee experience and skill sets. For individuals seeking a career in mechanical engineering, moving forward with the tools necessary for success in this continuously evolving world begins with higher education. This paper is the first of a three-part series to report on the progress of Boise State University’s Mechanical and Biomedical Engineering Department’s mission to implement a revolutionized curriculum in their academic program. This paper will …

Faculty Perspectives On The Impact Of Virtual Office Hours In Engineering Courses, Brooke-Lynn Caprice Andrade, Krishna Pakala, Diana Bairaktarova, Douglas Hagemeier, Harish Subbaraman

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Instructor-student interaction is an important element of a course design, but office hours can be challenging to attend based on students’ commitments. They have time and space limitations that prevent students from getting the help they need and often garner poor attendance. Virtual office hours can address issues related to low attendance and provide a low stakes environment where unhindered learning can happen. Virtual office hours are flexible, yield productive interactions, and all enrolled students can participate. This study reports on three engineering instructors’ perspectives on the efficacy of virtual office hours compared to the traditional face-to-face interactions with the …

Work-In-Progress: Augmented Reality System For Vehicle Health Diagnostics And Maintenance, Yuzhong Shen, Anthony W. Dean, Rafael Landaeta

Electrical & Computer Engineering Faculty Publications

This paper discusses undergraduate research to develop an augmented reality (AR) system for diagnostics and maintenance of the Joint Light Tactical Vehicle (JLTV) employed by U.S. Army and U.S. Marine Corps. The JLTV’s diagnostic information will be accessed by attaching a Bluetooth adaptor (Ford Reference Vehicle Interface) to JLTV’s On-board diagnostics (OBD) system. The proposed AR system will be developed for mobile devices (Android and iOS tablets and phones) and it communicates with the JLTV’s OBD via Bluetooth. The AR application will contain a simplistic user interface that reads diagnostic data from the JLTV, shows vehicle sensors, and allows users …

Enhancing Teamwork Skills Through An Interdisciplinary Engineering Service Learning Collaboration, Pilar Pazos, Francisco Cima, Jennifer Kidd, Stacie I. Ringleb, Orlando Ayala, Kristie Gutierrez, Krishnanand Kaipa

Engineering Management & Systems Engineering Faculty Publications

The purpose of this research paper is to explore whether participation in an interdisciplinary collaboration program partnering Preservice Teachers (PST) and Undergraduate Engineering Students (UES) results in an increase in teamwork effectiveness. The interdisciplinary collaboration was designed as a service-learning project within existing undergraduate programs that included the development and delivery of engineering content to a K-12 audience. The collaborations were integrated into existing courses in two colleges, engineering and education. The Behaviorally Anchored Rating Scale (BARS) version of the Comprehensive Assessment of Team Member Effectiveness (CATME) was used midway and at the end of the project to evaluate teamwork …

The First Year Of An Undergraduate Service Learning Partnership To Enhance Engineering Education And Elementary Pre-Service Teacher Education, Stacie I. Ringleb, Jennifer Kidd, Pilar Pazos, Kristie Gutierrez, Orlando Ayala, Krishnanand Kaipa

Mechanical & Aerospace Engineering Faculty Publications

This IUSE project was designed to address three major challenges faced by undergraduate engineering students (UES) and pre-service teachers (PSTs): 1) retention for UESs after the first year, and continued engagement when they reach more difficult concepts, 2) to prepare PSTs to teach engineering, which is a requirement in the Next Generation Science Standards as well as many state level standards of learning, and 3) to prepare both groups of students to communicate and collaborate in a multi-disciplinary context, which is a necessary skill in their future places of work. This project was implemented in three pairs of classes: 1) …

Upgrading Of A Data Communication And Computer Networks Course In Engineering Technology Program, Murat Kuzlu, Otilia Popescu

Engineering Technology Faculty Publications

Data network communications is traditionally a course offered by computer engineering technology curricula, with the primary objective to introduce to the fundamental concepts in data communication and computer networks, as well as some level of hands-on component related to this area. Typical topics in such courses are the layered model of data communication, specifically the OSI seven-layered model, Internet routing, communication standards, protocols and technologies, and learning methods used to design the network and send data over the network in a secure manner. In the last decades, the data communication and applications have grown and become ubiquitous in both industry …

Curriculum Development For Robotics Technology Program, Sanjeevi Chitikeshi, Shirshak K. Dhali, Betsey Odell, Vukica Jovanovic, Cheng Y. Lin

Engineering Technology Faculty Publications

With a growing need for a more skilled workforce, providing industry-driven and employment centric training services is an important national priority. Over 3.4 million manufacturing jobs will need to be filled across the United Sates over the next decade. The skills gap is becoming greater based on the statistics provided by the Global Robotics Technology Market: Forecast, 2014-2020 published by Research and Markets, reporting that the worldwide robotics market is forecast to grow from the 2015 level of $26.98B to $82.78B in 2020. This 11 % compounded average growth in the next five years is unprecedented. Given the anticipated growth …

Design A Class Infusion Project Of Asme Geometric Dimensioning And Tolerancing Standard, Cheng Y. Lin, Hamid Eisazadeh, Alok K. Verma

Engineering Technology Faculty Publications

This paper describes the development of a short course of Geometric Dimensioning and tolerancing (GD&T) for Mechanical Engineering (ME)/Mechanical Engineering Technology (MET) students in their freshman/sophomore classes. This class-infusion project was assisted and validated by an ASME Standards and Certification Engineer and was jointly sponsored by the ASME Committee on Engineering Education and the ASME Council on Standards and Certification. To assess the performance of the project, an instrument was developed with multiple-choice problems and survey questions for the students. The results of a field test in a sophomore manufacturing class are presented. The module is available at the ASME …

What Do Undergraduate Engineering Students And Preservice Teachers Learn By Collaborating And Teaching Engineering And Coding Through Robotics?, Jennifer Jill Kidd, Krishnanand Kaipa, Samuel J. Jacks, Stacie I. Ringleb, Pilar Pazos, Kristie Gutierrez, Orlando M. Ayala, Lillian Maria De Souza Almeida

Teaching & Learning Faculty Publications

This research paper presents preliminary results of an NSF-supported interdisciplinary collaboration between undergraduate engineering students and preservice teachers. The fields of engineering and elementary education share similar challenges when it comes to preparing undergraduate students for the new demands they will encounter in their profession. Engineering students need interprofessional skills that will help them value and negotiate the contributions of various disciplines while working on problems that require a multidisciplinary approach. Increasingly, the solutions to today's complex problems must integrate knowledge and practices from multiple disciplines and engineers must be able to recognize when expertise from outside their field can …

The Impact Of A Smartlab Implementation On Rural Schools In North Dakota, Tonya M. Greywind

Dissertations, Theses, and Projects

This mixed methods quasi-experimental phenomenological study investigated the impact that a SmartLab® implementation had on four rural schools in the state of North Dakota. This study featured semi structured interview questions for facilitators, semi-structured focus group questions for students, and a digital literacy pre and post assessment (DLA) that was administered to students. This study looked at student learning in terms of twenty-first century skills, teacher and student perspectives in terms of student learning as well as teacher perspectives on the impact of the SmartLab® on their own teaching methods.

Two facilitators from two of the four schools were interviewed …

A Statistical Analysis Of The Unm Facets Design Identity & Beliefs Survey Data, Clarissa A. Sorensen-Unruh

Mathematics & Statistics ETDs

The NSF-funded FACETS (Formation of Accomplished Chemical Engineers for Transforming Society, NSF Award 1623105) grant aims to transform the undergraduate engineering experience in the Department of Chemical and Biological Engineering at the University of New Mexico to address attrition within engineering majors, especially among underserved populations (Brainard & Carlin, 1998). The UNM FACETS Design Identity & Beliefs survey, an assessment tool used as part of the research of the grant, generated the dataset used in this study. I performed several different statistical analyses on the dataset, including confirmatory factor analysis (CFA), principal component analysis (PCA), and cluster analysis. The …

Understanding Latina Undergraduate Engineering Student Persistence, Yarissa I. Ortiz-Vidal

Electronic Theses and Dissertations

In summary, this study focused on understanding the persistence of 20 Latina undergraduate engineering students enrolled at two public four-year Hispanic Serving Institutions. Key findings in this study showed that in order to contribute to their own persistence in engineering majors these Latina students activated their community cultural wealth: (a) not only to resist different forms of oppression, but also to thrive and excel in academic settings, (b) to take control of difficult and challenging experiences, (c) to take/receive knowledge from others, but also to give/share their knowledge (cyclical tendencies of CCW), (d) as well as revealing that helping others …

Understanding Early Childhood Engineering Interest Development As A Family-Level Systems Phenomenon: Findings From The Head Start On Engineering Project, Scott Pattison, Gina Svarovsky, Smirla Ramos-MontañEz, Ivel Gontan, Shannon Weiss, VeróNika NúÑEz, Pam Corrie, Cynthia Smith, Marcie Benne

Journal of Pre-College Engineering Education Research (J-PEER)

There is growing recognition that interest is critical for engaging and supporting learners from diverse communities in engineering and other science, technology, engineering, and mathematics (STEM) topics. Although interest research has historically focused on older children, studies demonstrate that preschool-age and younger children also develop persistent, individualized interests in different objects, activities, and topics and that these early interests have important implications for ongoing learning and development. Unfortunately, there is relatively little research on engineering learning in early childhood and almost no work specific to the concept of interest. To begin to address this need, we conducted in-depth case study …

Design Of A Shallow-Aero Ebb And Flow Hydroponics System And Associated Educational Module For Tri Cycle Farms, Julie Halveland

Biological and Agricultural Engineering Undergraduate Honors Theses

Tri Cycle Farms, whose main mission is to reduce food insecurity in their community, is a non- profit urban farm in Fayetteville, Arkansas. The “Tri” in their name refers to the three parts of their foundation: giving a third of their yield to volunteers, giving a third to local food pantries, and selling a third to sustain the farm and demonstrate the economy of local food production. They want to expand on the third part and have a vision of building a hydroponic greenhouse with the intention that it will create more crops to sell and give, as well as …

Establishing A Content Taxonomy For The Coherent Study Of Engineering In P-12 Schools, Greg Strimel, Tanner Huffman, Michael Grubbs, Eunhye Kim, Jamie Gurganus

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering education has increasingly become an area of interest at the P-12 level, yet attempts to align engineering knowledge, skills, and habits to existing elementary and secondary educational programming have been parochial in nature (e.g., for a specific context, grade, or initiative). Consequently, a need exists to establish a coherent P-12 content framework for engineering teaching and learning, which would serve as both an epistemological foundation for the subject and a guide for the design of developmentally appropriate educational standards, performance expectations, learning progressions, and assessments. A comprehensive framework for P-12 engineering education would include a compelling rationale and vision …

Capturing Children With Autism’S Engagement In Engineering Practices: A Focus On Problem Scoping, Hoda Ehsan, Monica E. Cardella

Journal of Pre-College Engineering Education Research (J-PEER)

In the last two decades, pre-college engineering education has increased, with research on pre-college engineering education emerging as a nascent field. However, limited research, if any, has considered aspects of engineering thinking of children with neurodiversity. In line with calls for broadening participation in engineering education, consideration of neurodiverse children is critical. Among various neurodiverse conditions, the number of children with autism is rapidly growing. In addition, studies have shown that individuals with autism have the potential to perform well in activities that require systematizing abilities. Engineering is one such activity. Prior research has provided evidence of the importance of …

Academic Honesty, Professional Integrity, And Undergraduate Engineering Students: Exploring The Connections, S. Amy Skyles, Jeffrey W. Jennings

Dissertations

One benefit of inculcating professionalism into engineering degree program curricula is a measure of the extent to which future practitioners adopt an engineering code of ethics (Abaté, 2011; Davis, 2006). Studies have indicated more dishonesty among engineering students than other groups of undergraduate learners, but the effects of technology on dishonesty in the classroom was not addressed (Bowers, 1964; McCabe et al., 2012). An explanatory, sequential mixed methods study was designed to explain to what degree course pedagogical practices and attitudes of civil, architectural and environmental engineering students of various academic levels (freshman/sophomore and senior) relate to academic dishonesty. The …

Review Of Living Learning Communities And Their Impact On First Year Engineering College Students, Samantha Schauer, Krishna Pakala, Kim M.B. Tucker

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Traditionally, first-year college students do not have a community of like-minded peers with whom they are able to learn. Adding to first-year engineering college students’ (FYECS) struggles is the fact that many students do not have a mentor in their related field and are unable to start building their professional repertoire, network, and/or practical skills. Living Learning Communities (LLC) can offer a platform for postsecondary institutions to increase recruitment, engagement, and sense of belonging for students who live in an LLC. LLCs have been described in the literature as themed living and learning communities where students take a common course(s), …