Education Commons^™

Developing Instructional Technology Standards For Educators: A Design-Based Research Study, Helen Crompton, Carolyn Sykora

Teaching & Learning Faculty Publications

Digital technologies are key tools that can be used to extend and enhance teaching and learning. However, empirical evidence show educators are unclear how to integrate technology and it is often used to support past teaching practices. Designbased research (DBR) involving a grounded theory design was used to construct a set of seven detailed education technology standards to provide guidance on how technology should be integrated and a set of 24 examples as indicators of these standards. This DBR mixed methods approach involved 2429 participants and gathered data from focus groups, surveys, and interviews. The DBR involved two macro cycles …

Standards For Technological And Engineering Literacy: Addressing Trends And Issues Facing Technology And Engineering Education, Johnny J. Moye, Philip A. Reed

STEMPS Faculty Publications

The article offers information on addressing trends and issues facing technology and engineering education. It mentions future challenges, students need to "have a broad conceptual understanding of technology and its place in society, enabling them to be active participants in the technological world and careful creators and users of technology.

2020 President’S Message, Philip A. Reed

STEMPS Faculty Publications

The article discusses International Technology and Engineering Educators Association (ITEEA) 2019-2020 President, Michael Sandell, on projects. Topics include ITEEA has collaborating with the STEM Leadership Alliance and other associations such as the National Council of Teachers of Mathematics, and National Science Teaching Association; and the views of Executive Director, Steven Barbato, on project.

Current And Future Trends And Issues Facing Technology And Engineering Education In The United States, Johnny J. Moye, Phillip A. Reed, Ray Wu-Rorrer, Douglas Lecorchick

STEMPS Faculty Publications

Determining trends and issues is important for the health of any profession. The purpose of this research was to determine the current and future trends and issues facing technology and engineering education (TEE) in the United States (U.S.). The researchers used a three-round Modified-Delphi method to solicit information from technology and engineering education stakeholders across the U.S. In the first round, participants listed what they felt were current trends, future trends, current issues, and future issues facing TEE. The second round was designed to prioritize trends and issues. In the third round, participants were presented with one table for each …

Implementing Stel, Marie Hoepfl, Thomas Loveland, Philip A. Reed

STEMPS Faculty Publications

No abstract provided.

Attrition In Online And Face-To-Face Calculus And Precalculus Courses: A Comparative Analysis, Sarah Ferguson

STEMPS Faculty Publications

A multitude of online courses are available that provide opportunities for students to meet their higher education needs, goals, and desires in a nontraditional school setting. But, from a content specific perspective, how are students performing in online courses compared to their face-to-face counterparts? This study seeks to examine the attrition rates of online calculus and precalculus students relative to their face-to-face peers in an effort to expand the study of online mathematics pedagogy while providing course-specific data. Several studies have been conducted to explore attrition rates in relation to student demographics, STEM fields, and online course structure, but these …

Using Mobile Devices To Facilitate Student Questioning In A Large Undergraduate Science Class, Helen Crompton, Stephen R. Burgin, Declan G. De Paor, Kristen Gregory

Teaching & Learning Faculty Publications

Asking scientific questions is the first practice of science and engineering listed in the Next Generation Science Standards. However, getting students to ask unsolicited questions in a large class can be difficult. In this qualitative study, undergraduate students sent SMS text messages to the instructor who received them on his mobile phone and via Google Glass. Using observations, coding of texts, and interviews, the researchers investigated the types and level of questions students asked and the perceptions of the instructor and TAs on how the messages were received. From the findings of this study, it is evident that students asked …

Measuring Presence: A Review Of Research Using The Community Of Inquiry Instrument, Ana E. Redstone, Jill E. Stefaniak, Tian Luo

Distance Learning Faculty & Staff Publications

This systematic review provides a summary of studies on teaching, social, and cognitive presences in the community of inquiry (CoI) model using the CoI instrument in a higher education setting since its development in 2008 by Arbaugh et al. A total of 24 peer-reviewed studies on the CoI instrument from 2008–2017 were selected and analyzed explore the types of research on the instrument in higher education settings have been published, ways the instrument has been used for learning and teaching, and the implications the instrument poses for online instructors and instructional designers. It is organized into 4 themes: testing the …

Toys Redesigned: The Intersection Of Industrial Technology And Service-Learning Principles, Jill Stefaniak, Petros Katsioloudis, Basim Matrood

STEMPS Faculty Publications

To provide students with a situated learning experience that encouraged them to develop creative design solutions, the authors created a service-learning activity that required industrial technology students to apply design principles and procedures to design and develop toys to be given to pediatric patients at a local children's hospital. The following are excerpts from student reflections addressing the technological skills used and key takeaways from the project: * "I was able to use my mechanical skills in this project by knowing how to operate the drill press and by cutting all the pieces that were needed and assembling them." * …

Educational Technology And Distance Supervision In Counselor Education, Robert Milton Carlisle, Danica G. Hays, Shana L. Pribesh, Chris T. Wood

Educational Foundations & Leadership Faculty Publications

The authors used a nonexperimental descriptive design to examine the prevalence of distance supervision in counselor education programs, educational technology used in supervision, training on technology in supervision, and participants' (N = 673) perceptions of legal and ethical compliance. Program policies are recommended to guide the training and use of technology in supervision.

Understanding Angle And Angle Measure: A Design-Based Research Study Using Context Aware Ubiquitous Learning, Helen Crompton

Teaching & Learning Faculty Publications

Mobile technologies are quickly becoming tools found in the educational environment. The researchers in this study use a form of mobile learning to support students in learning about angle concepts. Design-based research is used in this study to develop an empirically-substantiated local instruction theory about students' develop of angle and angle measure. This local instruction theory involves real-world connections and mobile technologies through a sub category of mobile learning called context-aware ubiquitous learning. Through a process of anticipation, enactment, evaluation, and revision, the local instruction theory was developed to include a theoretical contribution of how students come to understand angle …

Using Computer-Aided Design Software And 3d Printers To Improve Spatial Visualization, Petros Katsioloudis, Millie Jones

STEMPS Faculty Publications

Many articles have been published on the use of 3D printing technology. From prefabricated homes and outdoor structures to human organs, 3D printing technology has found a niche in many fields, but especially education. The education of technology and engineering students has come a long way from traditional instruction using hand drawings. Although drawings may still be a part of a students learning, computer technology has been embraced in this field for several years. With the introduction of AutoCAD technical drawing programs and now 3D printing, learners can use 3D printed models to develop their spatial abilities in technology and …

Discover Math With Sketchpad Explorer, Helen Crompton

Teaching & Learning Faculty Publications

Review of Geometer's SketchPad.

Research Windows: Iste Standards In The Research, Helen Crompton

Teaching & Learning Faculty Publications

[First paragraph]

When ISTE began developing educational technology standards for PK-12 students in the early 1990s, it was ahead of its time. The organization saw the need to prepare students for the future, and it invested in standards as a way to give schools a clear path to staying relevant. The future that ISTE foresaw has definitely arrived, but it's not standing still. To ensure that the standards remain useful for students and educators around the world, ISTE has submitted them to a rigorous updating and revision process.

Implementation Of A One-To-One Ipod Touch Program In A Middle School, Helen Crompton, Julie Keane

Teaching & Learning Faculty Publications

The purpose of this study is to investigate the implementation of a whole school one-to-one iPod Touch project in a middle school in the southeastern United States. While some focused studies have been undertaken in this new field of learning, there has been little research to date that documents activity within a whole school implementation (Chen, Kao, & Sheu, 2003; Conti-Ramsden, Durkin, & Simkin, 2010). Using Rogers' (1963, 2003) theory of diffusion of innovation as a lens for this research, we gathered data from observations, focus groups, and interviews. Our findings indicated that teachers focused on internet-based research activities, formative …

Using Blogs To Promote Literary Response During Professional Development, Jaime Colwell, Amy Hutchison, David Reinking

Teaching & Learning Faculty Publications

(First paragraph) The blogging has, I don’t want to say forced, but kind of made me read books that I haven’t necessarily read before, and I don’t think I would have. I’ve read lots of children’s books just through student teaching and everything, but it makes me look outside the box and maybe at other genres that I wouldn’t look at necessarily. (Sam, a pre-service teacher, blogging in a children’s literature course)

See Me, Hear Me, Coach Me, Marcia L. Rock, Madeleine Gregg, Pamela W. Howard, Donna M. Ploessl, Sharron Maughn, Robert A. Gable, Naomi P. Zigmond

Communication Disorders & Special Education Faculty Publications

The writers describe the implementation of virtual coaching for teachers in Alabama and Pennsylvania. They describe use of bug-in-ear devices, revolutionized by Internet and mobile technology advances, to provide on-the-spot feedback as teachers deliver instruction. They outline lessons learned from virtual coaching initiatives and present research results showing the positive impact of this approach on both teachers and students. They also provide advice for those using this approach on making contact and providing feedback.

The Journey Towards Technological Literacy For All In The United States — Are We There Yet?, Philip A. Reed

STEMPS Faculty Publications

The article discusses technological literacy in the U.S. The author focuses on the history of studying technology within general education and notes the scarcity of technology education requirements in American schools. He examines the impact of various studies conducted by the Standards for Technological Literacy (STL) and the National Research Council (NRC), among others, on technological literacy. The author compares the seventeen processes of researcher Harold Halfin's technological research to the theories outlined in various STL material, including observation, analysis, and visualization.

Stem Initiatives: Stimulating Students To Improve Science And Mathematics Achievement, Robert Q. Berry Iii, Philip A. Reed, John M. Ritz, Cheng Y. Lin, Steve Hsiung, Wendy Frazier

STEMPS Faculty Publications

The article focuses on how concepts in science, technology education, and mathematics show powerful relationships when it comes to student learning. Learning theorists believe that, through designed learning environments (contexts) and learning with hands-on projects, new knowledge can not only be learned, but learned in such a way that the knowledge can be transferred for other applications. Scholars in the applied sciences (school science, technology, and mathematics) believe that these subjects have transfer among themselves and that engineering activities can establish the contexts to learn these subjects, plus aid in the transfer of knowledge. This collaborative movement is referred to …

Creation Of A Faculty Task List For Teaching In A Televised Distance Learning Environment, John E. Turner, Philip A. Reed

STEMPS Faculty Publications

The purpose of this study was to develop a task list from which a self-check readiness evaluation tool could be developed to assist faculty who were unfamiliar with televised distance instruction. The study's results should provide guidance to new faculty in identifying both self-directed and assisted staff development activities in preparation for implementing distance education. A survey of experienced distance learning faculty at a major eastern university was utilized for data collection. Initial survey items came from distance learning literature, as well as interviews and feedback from six faculty members experienced in televised instruction. At the request of the researchers, …