Business Commons^™

Information Technology And People Involvement In Organizational Performance Through Supply Chain Collaboration, Aamir Rashid, Rizwana Rasheed, Noor Aina Amirah

Publications and Research

Purpose – Supply chain collaboration (SCC) benefits organizational performance (OP). Although it is complex, it is also hard to implement and measure collaborative initiatives in the field of the supply chain. This study aims to examine the role of information technology (IT) and people’s involvement in OP through the mediation of supply chain collaboration. Design/methodology/approach – This study used a deductive and quantitative approach to test the research hypotheses. Data was collected from 249 supply chain professionals working at various manufacturing firms. Findings – This research found a significant effect of IT on supply chain collaboration. Similarly, people involvement (PI) …

Lululemon Athletica Strategic Audit, Nolan T. Rinn

Honors Theses

Lululemon Athletica Inc. (Lululemon) is principally a designer, distributor, and retailer of technical athletic apparel, footwear, and accessories with a vision to create transformative products and experiences that build meaningful connections, unlocking greater possibility and wellbeing for all (Lululemon). This paper will examine Lululemon to understand its market position and competitiveness within the athletic apparel industry. The analysis uses PESTEL and Porter’s Five Forces analyses to evaluate the changing external environment and industry Lululemon operates in.

Determinant Of Employee Productivity In Listed Manufacturing Firms In Southwestern Nigeria, Omoneye O. Olasanmi, Omotola O. Olajide, Olugbenga A. Ojubanire

International Journal of Applied Management and Technology

The study analyzed the level of employee productivity and identified factors influencing employee productivity in listed manufacturing firms in southwestern Nigeria. The descriptive survey design was adopted for this study. A sample of 394 respondents was selected using a simple random sampling technique. Data collected using a structured questionnaire were analyzed using descriptive and inferential statistics. The study showed that a majority of the respondents (58.33%) had average productivity levels. Results further revealed that management and organizational factors were identified as having the greatest influence on employees’ productivity, followed by organizational/technical factors, and then production and finance factors. In addition, …

A Dual Perspective Towards Building Resilience In Manufacturing Organizations, Steven A. Fazio

Theses and Dissertations

Modern manufacturing organizations exist in the most complex and competitive environment the world has ever known. This environment consists of demanding customers, enabling, but resource intensive Industry 4.0 technology, dynamic regulations, geopolitical perturbations, and innovative, ever-expanding global competition. Successful manufacturing organizations must excel in this environment while facing emergent disruptions generated as biproducts of complex man-made and natural systems. The research presented in this thesis provides a novel two-sided approach to the creation of resilience in the modern manufacturing organization. First, the systems engineering method is demonstrated as the qualitative framework for building literature-derived organizational resilience factors into organizational structures …

Logistics Outsourcing In Large Manufacturing Companies: The Case Of Slovenia And Lessons From Other Countries, Marko Budler, Marko Jakšič, Teja Vilfan

Economic and Business Review

Logistics outsourcing is a mode of operation for companies in global supply chains that have been increasingly devoting more attention to their core activities. This study examines the state-of-the-art in logistics outsourcing in the Slovenian manufacturing industry. Additionally, the authors benchmark the findings against a similar study from 2013. Finally, this study provides a discussion of logistics-outsourcing specifics in some countries with the use of secondary data. We identify transportation as a top-ranked logistics activity, and a general propensity for higher-level logistics outsourcing (e.g. 4PL). The authors contribute to the supply-chain management society by identifying the drivers of, barriers to, …

Fasten: An Iot Platform For Supply Chain Management In A Covid-19 Pandemic Scenario, Fernando Lemos, Thays Do Nascimento, Gustavo Dalmarco

Markets, Globalization & Development Review

This paper points out the major disruptions caused by the COVID-19 pandemic. It proposes an automated Internet-of-Things (IoT) based manufacturing and supply chain system, termed FASTEN, that can deal with such severe disruptions.

Impact Of Artificial Intelligence, Machine Learning, And Automation In Operations Management: An Analysis Of Healthcare, Manufacturing, And Retail Sectors, Jasmine N. Kelley

Honors Theses

In this thesis, we study the impacts of artificial intelligence (AI), machine learning (ML), and automation on operations management (OM). We specifically target the industries of healthcare, retail, and manufacturing in our analysis since each sector has distinct dynamics and concerns regarding the structural changes imposed by advancements in AI. We analyze 120 high-quality peer-reviewed journal articles to capture recent research trends in healthcare, retail, and manufacturing. Using respected business analytics reports, we compare academic efforts to industry initiatives. We find that growing interest in AI research in academia is consistent with growing research and development (R&D) investment and patent …

Machine Learning In Manufacturing: Review, Synthesis, And Theoretical Framework, Ajit Sharma, Zhibo Zhang, Rahul Rai

Business Administration Faculty Research Publications

There has been a paradigmatic shift in manufacturing as computing has transitioned from the programmable to the cognitive computing era. In this paper we present a theoretical framework for understanding this paradigmatic shift in manufacturing and the fast evolving role of artificial intelligence. Policy, Strategic and Operational implications are discussed. Implications for the future of strategy and operations in manufacturing are also discussed. Future research directions are presented.

Application Of Critical Chain Project Management To The Production Part Approval Process, David Podolak

Masters Theses & Specialist Projects

Daicel Safety Systems Americas, INC has traditionally utilized various methods to manage project completions including the Critical Path Method (CPM). Though these methods have led to successful project completions, they often come with adverse effects. Due to the amount of literature and advancement in the project management discipline, alternative options such as Critical Chain Project Management (CCPM) have gained popularity. CCPM seeks to perfect the CPM approach by recognizing resource constraints and the critical chains dependency on them while safeguarding completion dates with buffers. CCPM offers project managers an option to remove resource inefficiency and stalling while meeting deadlines.

The …

Procurement Strategies In Nigerian Ceramics Manufacturing, Emmanuel Korede Alege

Walden Dissertations and Doctoral Studies

Some developing nations struggle with a diminishing manufacturing output market share because of a lack of appropriate procurement strategies. The purpose of this single case study was to explore the procurement strategies that managers successfully developed and deployed to improve company performance. The strategic alignment model was the conceptual framework for the study. Data were collected through semistructured interviews of 6 members of a Nigerian ceramics manufacturing company, as well as from a review of publicly available documents related to the performance of the company. A thematic analysis of the data was conducted to identify codes, extract subthemes and themes …

Productivity And Employee Behavior Change Strategies In Two Nigerian Manufacturing Organizations, Marvel Saturday Ogah

Walden Dissertations and Doctoral Studies

Some Nigerian manufacturing organizations suffer significant losses yearly due to a lack of employee commitment and engagement. The purpose of this qualitative multiple case study was to gain understanding of the strategies that leaders in the manufacturing industries in Lagos need to know in order to change employee behavior to achieve increased organizational productivity levels. The conceptual framework that grounded the study was the path-goal theory of leadership. Data were collected from semistructured interviews with a purposeful sample consisting of 24 managerial and non-managerial staff members of 2 manufacturing organizations in Nigeria who have had experience in, and training, and …

Leadership Strategies And Employee Performance Within Small Business, Letica Carla Sellers

Walden Dissertations and Doctoral Studies

The survival of the small business industry is important to the United Sates workforce and economy. The purpose of this multiple case study was to explore leadership strategies of 2 small business managers in a manufacturing setting who had a demonstrable record of improving employee performance to meet organizational goals. The conceptual framework for this study was Burns and Bass's transformational leadership theory. The small business managers were from 2 small manufacturing plants in the coastal plains region of South Carolina. Data were collected from semistructured interviews, archival documents, and observations of the managers during their daily activities. Data analysis …

Exploring Strategies To Gain Frontline Employee Buy-In During Change Initiatives In Manufacturing, Charles James Iv

Walden Dissertations and Doctoral Studies

The high failure rates of change initiatives threaten the sustainability of commercial printing operations. The focus of this qualitative multicase study was to research the strategies commercial printing managers use to succeed in gaining frontline employee buy-in during change initiatives to improve productivity and profitability in a manufacturing environment. The participants included four commercial printing managers from the Midwestern United States. Each manager had implemented successful change initiatives in the past 2 years and maintained profitability of the business for 12 months before the study. McGregor's (1960) Theory Y served as the basis for the conceptual framework. Data collection included …

Improving Machine Changeover/Setup Times By Increasing U.S. Manufacturers' Knowledge Of 5s, Nicole Schra-Martin

Walden Dissertations and Doctoral Studies

The 5S process is one of the techniques born out of Japanese manufacturing. Ohno, the developer of 5S, found that when manufacturing waste is eliminated, costs are reduced and profits increase. This is the bases of 5S and this research. The cost of U.S. manufactured products is higher compared to the cost of products from other global manufacturers that use 5S. This study was conducted to determine if implementing 5S in U.S. manufacturing could change U.S. manufacturing cost and if using 5S could impact U.S. manufacturing. The research questions focused on the relationship between 5S and changeover/setup times on production …

Leadership And Conflict Resolution On The Production Line, Patricia I. Fusch Ph.D., Gene E. Fusch Ph.D.

International Journal of Applied Management and Technology

Conflict between coworkers on the production line can be expensive as well as time consuming for companies. The business problem investigated in the study is the inability of supervisors on the production line to resolve conflict in nonunion companies, which, consequently, may lead to a drop in organizational productivity. Behaviors impacting shop floor productivity and performance were detected through miniethnographic and descriptive case study qualitative research methods through research of the production line leadership in a global company that manufactures kitchen and fireplace accessories. Results obtained from themes demonstrated that the production supervisor had some leader–member exchange leader characteristics including …

Human Factors Analysis And Classification System Interrater Reliability For Biopharmaceutical Manufacturing Investigations, Roberto Cintron

Walden Dissertations and Doctoral Studies

Human errors are an expected result of operations performed by individuals and frequently lead to accidents and other catastrophic events. The problem is that the current process used to investigate and mitigate human errors in the biopharmaceutical manufacturing industries is not effective, as it does not include the effects of human factors found to be effective in aviation and nuclear power organizations. The human factors and classification system (HFACS) was created for the investigations of accidents using the Swiss cheese model of accident causation as a theoretical framework. The purpose of this quantitative, inter-rater reliability study was to demonstrate the …

Exploring The Solar Pv Industry: A Survey Of Pv Manufacturers In China, Patrick E. Prince, Bingqing Zheng

Undergraduate Review

China’s photovoltaic (PV) manufacturing industry has grown significantly since 2000, from being almost nonexistent to providing over 50% of the market share of solar panels in 2012. However, due to the high tariff resulting from an anti-dumping investigation by the US and a shrinking export market, Chinese PV manufacturers are faced with a large amount of challenges. This paper investigated 1) the general issues influencing the success of this industry; 2) the current market channels and the advertising methods; 3) the comparison of supports from government and utility between desired and perceived; 4) the attitude of manufacturers towards external opportunity …

A Cross-Regional Comparison Of Fabricated Metals' Manufacturing Sector Resiliency, Linda Ann Holt

Walden Dissertations and Doctoral Studies

Fabricated metals' manufacturing sector employment in the United States declined following the onset of the 2008 recession. Premium compensation and benefits afforded to employees within the manufacturing sector amplified the negative effects of recessionary job losses. Using the regional macroeconomic complex adaptive systems (CAS) framework, the purpose of this study was to examine the geographic distribution of job losses, recovery rates, and adaptive behavior after the recession for the fabricated metals manufacturing sector by measuring and comparing effects in 50 East North Central division MSAs and 50 South Atlantic division MSAs in the United States. Independent sample t tests compared …

The Manufacturing Contribution To Innovation, Arnoud De Meyer

Arnoud DE MEYER

The description of the contribution of manufacturing to the innovation process is often limited to the task of providing the necessary information to enable the development function to create a design which is easy to manufacture, and to be instrumental in the fast ramp-up of the production process. Though these are important tasks, it is argued in this paper that there is a third aspect of manufacturing’s contribution to innovation, namely the creation of a manufacturing system which is favorable to product innovation. This goes far beyond the design of an appropriate production process, but requires the creation of a …

Can Partial Offshoring Contribute Growth Of Multinational Electronic Manufacturing Service Companies In The United States?, Harjit S. Naru, Tim Truitt

International Journal of Applied Management and Technology

With the increasing trend of offshoring, leaders of many companies prefer to offshore projects to reduce product cost and be competitive in the global market. This phenomenon creates fewer jobs in the United States as compared to low-cost foreign countries such as China. To address this problem, this quantitative correlational study reviewed the extent to which partial offshoring impacted the business growth of multinational electronic manufacturing service (EMS) companies in the United States. Results showed that partial offshoring does not have a significant relationship with business growth. Although statistically not significant, partial offshoring was found to be positively related to …

Production Streamlining Through Design, Implementation, And Analysis Of Lean Manufacturing Methods, Tyler Pattison

Honors Scholar Theses

Through the correct implementation of lean manufacturing methods, a company can greatly improve their business. Over a period of three months at TTM Technologies, I utilized my knowledge to fix existing problems ans streamline production. In addition, other trouble areas in their production process were discovered and proper lean methods were used to address them. TTM Technologies saw many changed in the right direction over this time period.

Driving Ohio's Prosperity (Auto Supply Chain), Edward W. Hill

All Maxine Goodman Levin School of Urban Affairs Publications

in cooperation with The MPI Group, Inc. Prepared for Compete Columbus. Central Ohio Is the Leverage Point of a Two-Job Strategy for Growing the Value of Automotive & Advanced Manufacturing How to help manufacturers do today’s job of meeting customers’ demands and tomorrow’s job of continuing to innovate and improve.

A Qualitative Study Of Selected Quality Knowledge And Practices In Guangdong Province, China, Tyler R. Thomas

Theses and Dissertations

The manufacturing industry has become very competitive in today's global market environment. Many US companies are faced with the choice of keeping their manufacturing domestic or looking to low cost off-shore countries to take advantage of the labor costs differences. To gain an understanding of the state of manufacturing in China, a major focus in the manufacturing world today, this thesis was undertaken. This thesis presents the findings of research conducted in Guangdong Province, China in June - July, 2005. This research addressed customer focus, leadership and general manufacturing and quality knowledge and practices of small, medium and large sized …

Outsourcing: A Theoretical Viewpoint, Aoife O'Riordan, Edward Sweeney, Austin Smyth

Conference papers

Outsourcing or offshoring as it is now known has been around for many decades. In the
beginning, it was only very peripheral activities that were outsourced, i.e. blue-collar (lower skilled)
work but this is now all changing with the outsourcing of white-collar jobs. The digital revolution, the falling costs of transport and telecom costs and the opening up of the global economy helped the outsourcing market. For companies going down or contemplating the road of outsourcing there are both potential benefits and challenges, for example, the type of outsourcing they want to get involved in, and the country they want …

Outsourcing: A Way To Improve The Responsiveness And Agility Within The Organisation, Aoife O'Riordan, Edward Sweeney, Austin Smyth

Conference papers

Outsourcing or offshoring as it is now known has been around for many decades. In the beginning it
was only very peripheral activities that were outsourced, blue collar (lower skilled) work but this is now all changing with the outsourcing of white-collar jobs. Historically, outsourcing was used when
organisation could not perform to world-class excellence in all sectors of the organisation due to
incompetence of staff and/or management, lack of capacity, financial pressures, and/or technological
pressure. The research currently underway is initially focusing on a literature review of current outsourcing applications in the market place. From the literature review, a …

The Impact Of Increasing User Expectations On Machine Replacement, Robert F. Marsh, Seong-Hyun Nam

WCBT Faculty Publications

This study explores the traditional equipment maintain or replace decision under scenarios of increasing customer expectations, loss due to process deviation, and process drift. Customer expectations are operationalized by tighter product specifications. The Taguchi loss function is employed to estimate the loss due to target deviation. In this paper we characterize the machine drift, uncertainty about future technological change, and the learn-and-break-in process by a generalized Brownian-Motion-Ito-Process. The photolithography process is analyzed in numerous scenarios varying demand, rejection levels, and quality losses.

Effective Manufacturing Logistics, Edward Sweeney, Richard Wilding

Practitioner Journals

No abstract provided.

Running With The Pack: Jit & Automation For Small Manufacturers, Thomas E. Phillips, John R. Ledgerwood

Publications

While both just in time (JIT) concepts and automation programs have been widely implemented and highly successful in large manufacturing companies, many smaller manufacturing companies have wondered whether it would be economically feasible to utilize these same techniques and derive these same benefits. When JIT is adopted by small manufacturers, it provides them with advantages over traditional manufacturing systems, such as lower cost, quality improvements, higher productivity, and less working capital tied up in inventory. Small US manufacturers must understand the basic principles and philosophy of JIT and update their production equipment if they are to be competitive in today's …

An Integrated Approach To The Appraisal Of Investment Opportunities In Advanced Manufacturing Technology Using Expert System Techniques, Edward Sweeney

Conference papers

No abstract provided.

A Computer Integrated Manufacturing Major For Georgia Southern College School Of Technology, Robert James Christensen

Legacy ETDs

No abstract provided.